heidelberg printing machines used for sale

Тype: WALDYSSA 33 Stretchfilm wrapping machine Маx. trays dimensions L x B x H: 300 x 200 x 160 mm Мin. trays dimensions L x B x H: 110 x 90 x 10 mm Capacity: max. 28 trays / min Machine dimensions: Length: 2500 mm Width: 1450 mm Height: 1500 mm Voltage: 380 V, 50Hz Power: 2,6 kW Machine weight: 350 kg

Тype: WALDYSSA AUTOMAC 45 Model: B 223 ZR Stretchfilm wrapping machine Product dimensions in mm.: A: 120 min., 320 max. B: 120 min, 230 max. H: 10 min., 200 max. Capacity: up to max. 42 trays / min. Film type: shrink stretch Film dimensions in mm: L x S: 300, 250 min. L x S: 600, 700 max. Machine dimensions: length: 190,0 сm width: 170,0 сm height: 150,0 сm Voltage: 400 V, 50Hz Power: 3,9 kW Machine weight: 500 kg

AMOB MAH 40/3 CNC 3-roll bending machine was built in 2021 in Portugal by AMOB Group. The machine, designed for bending tubes and profiles, ensures the highest precision and repeatability of the produced parts. The machining process is performed by three hardened rollers, of which the upper roller has hydraulic adjustment. Each of these is driven by a reliable, high-power motor, which is located inside a fully welded body. This solution enables bending of even the most complex shapes both vertically and horizontally. All this is complemented by an advanced CNC control with memory for numerous programmes. The MAH 40/3 CNC tube and profile bending machine weighs 540 kg. Technical specifications of the AMOB MAH 40/3 CNC bending machine - control panel with CNC control - number of rollers: 3 - roller diameter: 148 mm - roller rotational speed: 12 rpm - number of shafts: 2 - shaft di ...

Technical Specifications - Bridgeport Series I Table Size / Work Surface 9" × 49" (≈ 299 mm × 1245 mm) T-slots 3 pieces, spacing 2.5" (≈ 64 mm), groove width 0.625" (≈ 16 mm) Travel X (Transverse) without Power Feed: 36" (≈ 914 mm) with power feed: 33" (≈ 838 mm) Travel Y (Transverse to Feed) 12" (≈ 306 mm) Quill Stroke (Drilling Spindle Stroke) 5" (≈ 127 mm) Knee Lift (Z-Axis of Table) 16" (≈ 406 mm) Ram Adjustment (Head Stem on Ram Slide) 12" (≈ 306 mm) Min. / Max. distance spindle axis to table nose (spindle/table nose distance) min: 2.5" (≈ 64 mm) Max: 18.25" (≈ 463 mm) Min. / Max. distance spindle to column front (minimum/maximum internal width) min: 6.75" (≈ 171 mm) max: 18.75" (≈ 476 mm) Spindle / Quill Spindle Diameter: 1.875" (≈ 48 mm) Quill Diameter: 3.375" (≈ 86 mm) Spindle holder (standard): R-8 Spindle motor / power 30 minute ...

Type: Vemag Robot HP 15 С Hopper content: 250 L, one-piece Bushing with double screw Steplessly adjustable filling speed: 0 - 100 % Control: РС Portion weight: from 5 up to 60000 g Compatible to work with clips machine Vacuum pump: 20 m3/h Loading device for standard trolleys Machine dimensions in сm: Width: 134,0 Length: 220,0 Height: 200,0 Power: 17,0 kW Voltage: 380 V, 50 Hz Weight: 1300 kg

Make : Ilpra Model : FS 5000 Year of Manufacture : 1996 Cup Size : 95mm Volume : 100 ml to 450ml Capacity : 4000 pcs per hour Voltage : 3 phase / 50Hz Air : 6 Bar HEPA Filter CIP Out Feed Conveyor Condition : Very Good Available : Immediately Previous Use : Yoghurt and Deserts Filling

Modern, precise production column drilling machine according to proven UNIMAX 3 concept with infinitely variable feed drive, automatic tool ejector and standard chip breakage control. The digital display displays feed, speed and drilling depth. Turn switch Right/Left Run. Emergency-off-stroke button. Motor protection. Pre-configured machine with optional equipment thread cutting device, free cutting function and LED lamp. Normal drilling capacity in E 335: 30 mm Thread cutting power: M 20 Spindle: MK 3 Feed infinitely adjustable in the range: 30 - 400 mm/min Drilling depth programmable: 125 mm Extension: 260 mm Distance spindle/table: 90 to 840 mm Table area: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Motor can be switched on pole: 0.8/1.5 kW Spindle speeds infinitely variable Drilling Range A: 80 - 1,440 rpm Drilling Range B: 180 - ...

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With path control MILL PLUS iT Year of Make: 2006 Travel: X 800 Y 800 Z800 Speed range: 0 – 8,000 rpm infinitely variable ( SK 50 ) With the following accessories: NC rotary table 900 mm x 700 mm clamping surface (table load max. 1.4 t) Universal milling head with controlled B axis Universal tool changer with 40 magazine positions as a double gripper ( SK 50 ) Full protection cabin with sliding doors and interior lighting IKZ – 40 bar Conveyor Rotoclear Tool Measurement BLUM Laser 3 D Probe Heidenhain TS 641 Operating mode 3 + 4 Electronic handwheel 3-Piece Height Adjustable Machine Shoes Transport device Operating instructions

Spiral kneader Diosna SP 200 D Mobile for max. 125kg flour or for max. 200kg dough with 2 timers automatic Spiral and boiler made of stainless material Boiler diameter Boiler contents approx. Machine movable on wheels with a steering roller Locking by 2 fixing digits with plastic flour dust cover Vat and kneading tool made of stainless steel 400 volt frequency 50 Hz Weight of the machine approx. Condition "good"

NOVICK AF1300 die-sinking EDM was built in 2012 in China by Novick Digital Equipment Co., Ltd. The machine is used to produce parts with complex geometries that have applications in, among others, aviation and aerospace industries. The machining process is performed by means of electrical erosion, which minimises or completely eliminates the need for other secondary processes, such as polishing. The combination of a full closed-loop control system and dual feedback compression, in turn, guarantees exceptional machining accuracy in even the most demanding applications. The NOVICK AF 1300 sinker EDM weighs 2300 kg. Technical specifications of the NOVICK AF 1300 die-sinking EDM - feed in the X/Y/Z axis: 520/300/300 mm - work table dimensions (L x W): 600 x 400 mm - generator: NOVICK 560F - power: 10 kVA - power supply: 3x 380 V; 50/60 Hz - weight of the NOVICK AF1300 machine: 2300  ...

Dough kneading machine Model: MBT SP 6 Protective grille with shutdown Table machine Spiral kneader for max. 6 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 220V Dough machine NEW with 12 months warranty

Robust, high-quality beading and flanging machine with electric motor drive, optionally available with hydraulic bending roller delivery - optionally available with circular cutting device Largest sheet thickness, which is malleable - 3 mm steel sheet/ST40, maximum extension 450 mm, maximum distance between the top and lower roller 100 mm, two working speeds 6 and 33 rpm - available at additional cost with infinitely adjustable working speed and frequency converter, Time relay for limiting the working cycle, possible round diameter when using the circular cutting device between 300 mm and 1,200 mm (optional up to 1,620 mm), cutting power with the shear blades 3 mm steel sheet/ST40, drive power 1.8 kW – drive power hydraulics 1.5 kW, weight of the base machine 570 kg

Spiral Kneader / Mixer Model: SP 340 MS LED control with temperature display/temperature control with return button Dough machine with 2 timers Tool speed adjustable for min/max. 10 - 220 kg dough Flour dust hood and boiler scraper 2 tank wagons ( 340 litres ) Stand machine with changetool Stainless steel tool: kneading spiral, flat stirrer, stirrer DGUV V3-tested Connection 400V, 13.6 kW, 50A 32A-CEE plug Dimensions: 1100 x 2100 x 1500/2300mm, WxDxH NEW Machine With 12 months warranty

Wire EDM Machine Manufacturer: Mitsubishi Electric Type: MV1200S NewGen Year of Make: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric Control Hybrid construction Travel: X/Y/Z: 400 x 300 x 220 mm Travel paths U V: 120 x 120 mm Workpiece dimensions max.: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS-Optical Drive System Tubular Direct Drives in XY Axes Linear scales in XY axes Intelligent AT – Automatic Wire Threading For wire diameters 0.10 – 0.3 mm Automatic fine hole search function 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS-Long Life System 10 kg wire station Wire alignment block Wire Chopper Compressor Cooler

Spiral Kneader / Mixer Model: SP 250 MS LED control with temperature display/temperature control with return button Dough machine with 2 timers Tool speed adjustable for min/max. 10 - 160 kg dough Flour dust hood and boiler scraper 2 tank wagons ( 250 litres ) Stand machine with changetool Stainless steel tool: kneading spiral, flat stirrer, stirrer DGUV V3-tested Connection 400V, 10.6 kW, 32A 32A-CEE plug Dimensions: 1050 x 1900 x 1250/2100mm, WxDxH NEW Machine With 12 months warranty

Key data: 320 mm, 500 mm, 3800 1/min

OKUMA Genos L 3000-e / 2021 Circumferential diameter max. 390 mm Turning diameter 300 mm Turning length 500 mm X - Axis 235 mm Z - axis 520 mm Y - Axis 100 (+50 / -50) mm C - Axis 360 / 0.001 ° Main spindle: Bar passage 70 (80) mm Speed range 38 - 3800 rpm Spindle motor 22 KW Torque 412 Nm Sub-spindle: Bar Passage 43 (53) mm Speed range 6000 rpm Spindle motor 7.5 KW Torque 47.7 Nm Tool turret: Number of applicants WZ im Revolver 12 Speed range 45 - 6000 rpm Drive 5.5 KW Torque 31.3 Nm Machine weight approx. 5500 kg CNC OKUMA OSP P300LA-e Electr. Handwheel Software: Automatic main spindle interpolation Software: Screw Line Interpolation Software: Eccentric milling Software: Tool height correction in Y-axis Software: Synchronized tapping with applied tapping Tools Software: ADVANCED ONE-TOUCH-IGF with autom. Work plan creation OSP-P300LA-e TE ...

Spiral Kneader / Mixer Model: SP 500 MS LED control with temperature display/temperature control with return button Dough machine with 2 timers Tool speed adjustable for min/max. 20 - 340 kg dough Flour dust hood and boiler scraper 2 tank wagons ( 500 litres ) Stand machine with changetool Stainless steel tool: kneading spiral, flat stirrer, stirrer DGUV V3-tested Connection 400V, 18.6 kW, 50A 32A-CEE plug Dimensions: 1150 x 2100 x 1550/2300mm, WxDxH NEW Machine With 12 months warranty

Stanko Ø 400 mm

Process chiller / chiller air-cooled, Type: TAEevo Tech 602 P3-20 MTA S.p.A. TAEevo Tech 602P3-20 are compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr., built-in P3 circulation pump and winter package -20°C (condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 116 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature °C 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 60.99 Max. current (A) 102.78 Starting Current Circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, width mm 1255, height mm 2119, Weight kg 1773 Connection Rp 2"  ...

Spiral Kneader / Mixer Model: SP 175 MS LED control with temperature display/temperature control with return button Dough machine with 2 timers Tool speed adjustable for min/max. 5 - 120 kg dough Flour dust hood and boiler scraper 2 tank wagons ( 175 litres ) Stand machine with changetool Stainless steel tool: kneading spiral, flat stirrer, stirrer DGUV V3-tested Connection 400V, 7 kW, 22A 32A-CEE plug Dimensions: 1000 x 1900 x 1250/2100mm, WxDxH NEW Machine With 12 months warranty

Process chiller / chiller air-cooled, Type: TAEevo Tech 602 P3-20 MTA S.p.A. TAEevo Tech 602P3-20 are compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr., built-in P3 circulation pump and winter package -20°C (condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 116 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature °C 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 60.99 Max. current (A) 102.78 Starting Current Circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, width mm 1255, height mm 2119, Weight kg 1773 Connection Rp 2" ...

Robust, high-quality round sheet bending machine for already profiled workpieces (sheet blades) - with motor drive at the bottom and top adjustable workpiece width between 300 mm and 800 mm, largest sheet thicknesses which can be bent round copper / titanium zinc / aluminium 0.8 mm - galvanized steel sheet 0.7 mm - stainless steel sheet 0.5 mm, smallest possible bending radius 350 mm - bending radius depending on the yield strength - smallest bending radius galvanized steel plate 0.7 mm - 1,000 mm, continuous speed infinitely adjustable 1 to 6 m/min, drive capacity 2 x 0.75 kW, weight 375 kg

CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 1.5 mm, upper cheek angle 160° - upper cheek stroke range up to 160 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 3 kW, dimensions approx. 4.3 x 1.8 m x 1.65 m, weight 2,700 kg

CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 3 mm, upper cheek angle 160°/140° - upper cheek stroke range up to 240 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 9 kW, dimensions approx. 4.6 x 1.8 m (depending on rear stop) x 1.9 m, weight 3,800 kg

CNC - controlled electro-hydraulic precision long-bending machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 6,050 mm, extension 1,250 mm, maximum sheet thickness ST42 - 3 mm, maximum bending angle 135° - upper cheek opening range up to 200 mm, rear stop with foldable stop fingers - stop range 12 to 1,200 mm - inclination up to 40° - travel speed adjustable up to 500 mm/sec, working height approx. 830 mm, drive power 7.5 kW, dimensions approx. 6.4 x 1.8 m x 1.5 m, weight approx. 8,500 kg

Conventional or NC - controlled heavy electrohydraulic sheet metal bending machine (swing bending machine) of excellent quality Largest bending length 2,540 mm, vertical particularly stiff upper cheek - largest bending angle 100° - electric motor bending cheek drive (one motor left + right each) - hydraulic upper cheek movement with synchronisation control - largest opening width 230 mm, Working table height 870 mm, drive power hydraulics 4 kW - drive power bending cheek 2 x 1.5 kW, dimensions without rear stop 3.6 m x 1 m x H 2.15 m, weight without rear stop 4,300 kg

Manual cut-out shears of excellent quality, for the burr-free cutting of sheet metal up to 1.5 mm sheet thickness steel sheet/ST40 – aluminium 2 mm, backdrop-guided knife beam, shear length 150 x 150 mm, clink angle 90°, dimensions 460 x 500 x 810 mm, weight 75 kg

Robust, high-quality manual sheet metal bending machine (swing bending machine) Largest bending length 3,080 mm, highest bending performance over the entire bending length - steel sheet/ST40 - 1.2 mm - stainless steel sheet 0.6 mm - zinc sheets, copper sheets, aluminium sheets - 1.5 mm, largest opening width of the upper cheek 68 mm, largest bending angle 160°, working height approx. 930 mm, dimensions 3.55 x 0.75 (without rear stop) x H 1.3 m, weight 930 kg Equipment: automatic opening of the upper cheek (patented) when lowering the bending cheek – two opening widths can be adjusted 15 mm and 65 mm, adjustable angle stop for repeat-accurate series bends, weight equalization of the bending cheek for easy machine operation, buttoned upper cheek to press folds. Optionally at an additional cost, the machines are equipped with a rear stop with 750 mm travel - as well as with a bead  ...

Semi-automatic machine Workpiece diameter 40-400 mm Max. workpiece length 2000 mm Spindle rotation frequency 16-1460 rpm Workpiece spindle speed 3-180 rpm Max. diameter of grinding: -In steady rest 120 mm -Without steady rest 360 mm Max. grinding length 1800 mm Height of centers above the table- 210 mm Max. work-piece weight- 1000 kg Grinding wheel dia min/max 500-750 mm Max. length of table travel- 1800 mm Spindle taper- Morze 6 Motor power: 13 kW Periodical feed of grinding headstock: -Max.: 0,030±0,0025 mm -Min.: 0,0025±0,0006 mm Max. axial travel of grinding headstock spindle: ±2,5 mm

Robust, high-quality beading and flanging machine with electromotor drive, hydraulic bending roller delivery and manual displacement of the stop plate Largest sheet thickness, which can be reshaped – 1.8 mm steel sheet/ST40, maximum extension 200 mm, maximum distance between the top and lower roller 30 mm, two working speeds 4 and 24 rpm – available at additional cost with infinitely adjustable working speed and frequency converter, time relay for limiting the working cycle, drive power 1.5 kW + 0.75 kW, weight 210 kg

Rego SM 4 RMT stop overhauled Rego Model: SM 4 RMT overhauled Stirring machine with automatic timer The machine when it comes to striking! 2 working functions: 1 x stirring / 1 x beating Working shaft/stirrer shaft reworked Powerful and robust technology Boiler lighting, timer Connection 400V, 16A-CEE plug Used machine overhauled with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Other accessories Ring Gas Burner Boiler New Brushes New Whisk New Wendering / Kesselring Maintenance contract Service Package Delivery Instruction & Commissioning

Robust, high-quality heavy beading and flanging machine with electric motor drive, electromotor bending roller delivery and electromotor displacement of the stop plate Largest sheet thickness that can be reshaped – 6 mm steel sheet/ST40, maximum extension 500 mm, maximum distance between the top and lower roller 48 mm, two working speeds 3 and 27 rpm – available at an additional cost with infinitely adjustable working speed and frequency converter, time relay for limiting the working cycle, drive power 3 kW + 0.75 kW, weight 1.150 kg

Demoor 825-320 oil country lathe. Distance between centers: 3000mm. Swing: 970mm. Swing in carriage: 700mm. Bore: 320mm. New electrical box. Carriage with cone copier. Equipped with chuck.

Number of drill units 7 Number of tapping units 4 Number of clamps 8

Pallet feeder – separating head Vaculift - Vacubelt 6 buckles Gate fold Compressor Without delivery

Machine details Bearing number 1105-03132 Machine type CNC lathe - slantbed machine Made GILDEMEISTER Type CTX 400 Built in 2000 Control type CNC Warehouse FRANCE Country of origin Germany Delivery time SOFORT Freight base from location, free loading truck Technical details Turning diameter 570 mm Turning length 635 mm Control Heidenhain CNC Pilot 4290 Turning diameter over bed slide 420 mm Spindle speeds - infinitely 25-5000 rpm Number of driven tools 6 mm Drive 5 kW Information CNC Heidenhain Pilot 4290 C-axis with 5 FESTE vdi holders 1 3 BAKE FOOD 1 X SPAENEFOERDERER WITH REITSTOCK + LNS STANGEN VORCHUB

Key data: 350 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 2000 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3.1 m x 1.1 m x 1.6 m Weight: 1800 kg Screen text: German Additional equipment Picker Air valve: x1

Heavy two-sided planing machine in special design - used (overhauled in 2015), . The machine is designed for demanding suitable for machining slats and beams. SPECIFICATIONS Work dimensions: Working width: up to 220 mm Working thickness: 20 - 80 mm Working length: min. 1,500 mm Table height: 900 mm Feed speed: 20 – (120) m/min. The machine will run at Tilly max. 60m/minute Drive motors Dressing shaft: 22 kW Thickness shaft: 30 kW Feed: 7.5 kW Lifting gear motor: 1.5 kW Tool: Horizontal shaft speed: 5,000 rpm Diameter of the tools: Horizontal shafts: 200 mm Chip removal: The maximum decrease depends on the feed speed of the workpiece width, wood texture, installed drive power and the depends on the desired surface quality. For specific information, please for your inquiry. Dressing shaft: up to 10 mm with full working width approx. 2.0 mm Thickness shaft: up t ...

Key data: 550 , 67 , 28

Type: 55 M Built: 2003 Control: Procan MD Closing type: Hydraulic Technical data Closing force: 550 kN Tie bar distance H x V: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance max.: 400 mm Plate spacing max.: 650 mm Screw diameter: 28 mm Lifting volume / spray weight (PS): 73.9 cc / 67 gram hp Spray pressure: 2778 bar General data Engine: 11 kW Heating: 9.6 kW Operating hours: on request Dimensions L x W x H: 3.3 m 1.8 m x 1.3 m Weight: 2430 kg Accessories Screen text: German Manual: Yes Additional equipment: Core train: x2 Robot interface

Type: MUTIVAC R 530 Film type: flexible Bottom film width: 625 mm Top film width: 610 mm Cut-off length: 657 mm Pack sizes: 2.1 (2 pack.: 640 x 267 mm) Max.depth: 200 mm Vacuum pump: 250 m3/h Length: 8500 mm

TWO SPINDLE BORING MACHINE Sr. No.: 71179 Equipment / Additional information: Tools

KOTEC PSD-4520 CNC drilling machine was built in 2020 in South Korea by KOTEC Co., Ltd. The machine, which is designed for drilling precision holes and threading, is an excellent choice for companies specialising in, among others, the construction of machinery or the production of steel structures. The machining process is performed in three axes (X,Y,Z) on a large work area with a length of 4500 mm and a width of 2000 mm. A number of state-of-the-art components, combined with an extremely stable design, guarantee the best results, even during the most intensive machining. All this is complemented by an advanced CNC control with an intuitive interface and all the necessary functions. The KOTEC PSD 4520 CNC beam drilling machine weighs approximately 8900 kg. Technical specifications of the KOTEC PSD-4520 CNC metal drilling machine - number of axes: 3 (X,Y,Z) - feed in the X/Y axis: 4 ...

The BATTENFELD BA 600 CDC injection molding machine was built in Austria in 2002. It is equipped with Unilog B4 control. It has a closing force of 600 kN forms. The screw diameter is 33 mm and the injection volume is 99 cm3. The machine has plates for mounting injection molds with dimensions of 511 x 511 mm, and the clearance between the columns is 320 x 320 mm. The injection molding machine is equipped with a receiving robot, hot runners, a conveyor belt for collecting moldings, four pillows, a string of cores and technical documentation. Technical parameters of the BATTENFELD BA 600 CDC injection molding machine – control: Unilog B4 – dimensions of tool plates: 511 x 511 mm – clearance between columns: 320 x 320 mm – tool height, min. : 150 mm – opening path: 511 mm – injection pressure: 2022 bar – injection volume: 99 cm3 – injection weight: 90 g – screw  ...

Unclinking machine, little used Notching machine , lessly used Type: VA 200/ 4 Built / yom: 1995 Manufacturer / make: KEMPFLE Table size: 1000 x 800 mm Power:/ capacity: 4 mm / for steel / steel 400 Nm/mm 3 mm for stainless steel 600Nm/mm Length of cutter blades: 205 mm Number of Strokes/ strokes: 60 per minute Cutting head/ cutter head: 30...135° (stepless) Weight / weight: 1.15 tons Connection value/ connected power: 4 kW

Reference ID: PP-53194 Category: Flatbed Die Cutter Manufacturer: Bobst Model: SP 104-ER Year Built: 1996 Color:- Impression:- Working Hours: 64,000 Speed: 8,000 sheets/hour Max. Size: 1039 x 740 mm Min. Size: 399 x 350 mm Condition: Good Location: Europe Availability: - Machine Description Feeder & Infeed Non-stop (manual/automatic): Manual Non-stop infeed bars (mm): 18 Non-stop bars coating (Chrome/Teflon/Standard): Standard Non-stop bars equipped with air pressure (Y/N): No Non-stop bars with lateral shifting (Y/N): Yes Lateral register available (Y/N): No Register type (POWER/ACCU/LATERAL/MECHANICAL): n/a Register mark width (1 mm): n/a Reading from (Top/Bottom/Both): n/a Front margin – standard/light sensor: Yes Mechanical front margin (25, 60, n/a): 25 Upper transport belts on infeed (corrugated): No Detection sheet direct ...

Technical data: - bending and rolling by hand, - max working width 1020 mm - max. material thickness St 40 1.25 mm - Bending angle adjustment via end stop 10 - 180 ° - max hub upper cheek approx. 85 mm - max. adjustable bending cheek 20 mm - Shaft diameter 55 mm - Upper shaft can be swivelled - Rear shaft parallel + obliquely adjustable - Space requirement approx. W 1500 x H 1400 x D 750 mm - Weight approx. 400 kg

Nederman 30S Industrial Vacuum Cleaner – Used, Tested & Ready to Use - Top Condition! For sale is a powerful Nederman 30S industrial vacuum cleaner, ideal for workshops, production, construction and industrial use. Specifications: • Model: 30S • Year of construction: 2015 • Voltage: 400 V / 3 phases • Power: 3.0 KW, 400 V, 50 Hz, 2800 rpm, 3 phases, 6.8 A, Iso F, S1, IP55 • Container volume: approx. 50 litres • Negative pressure -230 mbar, overpressure 245 mbar • Weight: approx. 90 kg • Condition: used, fully functional Scope of delivery: • Nederman 30S vacuum cleaner •Hose • Original chassis Condition: The device has been tested – motor runs smoothly and powerfully. Filters and containers were cleaned. Shipping / Pickup: • Pick-up preferred (heavy equipment) • Shipping by forwarding agent possible by arrangement • Locati ...

Technical data: - Threaded drilling capacity approx. M 3 - M 16 - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Tool quick change holder size 2 diameter 31 - various inserts for tool quick-change recording - Table area with 5 T-slots 2050 x 900 mm . Table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chuck 250 mm - Pneumatic connection with pressure reducer - mobile base - Space requirement approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Nilfisk T30S Industrial Vacuum Cleaner - Used, Tested & Ready to Use - Top Condition! For sale is a powerful Nilfisk T30S industrial vacuum cleaner, ideal for workshops, production, construction and industrial applications. Specifications: • Model: T30S • Year of manufacture: 2011 • Voltage: 400 V / 3 phases • Power: 3.0 kW / 400 V, 50 Hz, 2840 rpm, 3 phases, 6.6 A, cos phi 0.90, Iso F, S1, IP55 • Container volume: approx. 100 litres • Vacuum -220 mbar, 130 m³/h Overpressure 278 mbar, 120 m³/h • Filter type: cartridge filter • Weight: approx. 103 kg • Condition: used, fully functional Scope of delivery: • Vacuum cleaner Nilfisk T30S •Hose • Original chassis Condition: The device has been tested – motor runs smoothly and powerfully. Filters and containers were cleaned. Shipping / Pickup: • Pick-up preferred (heavy equipment)  ...

Table clamping area: 290 x 1250 mm Table movement x: 800 mm Table movement y: 360 mm Table movement z: 450 mm Milling head pivotable: 90/45 ° Spindle holder: ISA 40 Spindle speeds: 56 - 4500 rpm Pinolene stroke: 125 mm Pinolene feeds: 0.035; 0,14; 0.7 mm/min Spindle drive: 1.8/2.4 kW Space requirement: 2000 x 1900 x 2300 mm Weight: 1700 kg