heidelberg machines used for sale

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 € : 344.45 € : Dm. 200x78x78 mm : 2800 1/min : 300 mm : 300x150x55 mm : 350x150 mm : 500x160 mm : 3.6 kW : 1020 mm : 820 mm : 2170 mm : 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain t ...

: gebraucht : 2416 B : China : 180 € : 1 : 140 mm : 50 mm : 147 mm : 15 kg MINT CONDITION drilling machine vice (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 15095.86 € : 289.84 € : 30 mm : MK 3 : 300 mm : 0 - 4000 U/min : 3 kW : M30x3,5 : 900 mm : 610 mm : 1980 mm : 385 kg : 0,10 / 0,16 / 0,25 mm/U : 125 mm : 150 - 700 mm : 590 x 450 mm : 125 mm Drilling capacity / normal drilling capacity 30/35 (in E335/ST60) Main switch Dispositif de taraudage Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Mechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed rates Drilling cross with pushbutton (on/off) for feed rate In tapping mode: Right-left lifting ...

Paper Cutting Machine Polar Mohr 55 EM

BORCHE BH500 injection moulding machine was built in 2016 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the efficient production of plastic components used in many industrial sectors and in everyday products. The production process utilises the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This technology enables the rapid and precise production of repeatable components with complex geometries. The BORCHE BH500 has been designed for demanding mass production and intensive use. The machine is equipped, among others, with an 80 mm diameter screw and a precision mould clamping system with a force of 500 tonnes, which ensures a stable process. All operating parameters are programmed via the intuitive KEBA control system, which enables con ...

ARBURG ALLROUNDER 720S 3200-2100 injection moulding machine was built in 2008 in Germany by ARBURG GmbH + Co KG. The machine is designed for the efficient mass production of plastic components used across a wide range of industries. The production process utilises the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. A 60 mm diameter screw and a precision mould clamping system with a clamping force of 320 tonnes ensure the process runs smoothly, guaranteeing high repeatability and quality of the parts produced. The ARBURG ALLROUNDER 720S 3200-2100 is offered with a comprehensive range of equipment that increases the level of automation of the production process. All process parameters are programmed in the intuitive SELOGICA control system, which ensures convenient ...

Used Used Krones PET Blow Moulding machine Contiform S8: Year: 2004 Condition: As Is Used Krones PET Blow Moulding machine Contiform S8: Including (preform tipper, preform hopper, preform unscrambler, chiller, air conveyors for bottle transport year 2004) Model: Contiform S8 Year: 2004 Speed: 13,600 BPH Number of cavities: 8 Machine dimensions: Carousel 2000 mm x 2000 mm x 3000 mm (h) Oven 4000 mm x 2000 mm x 3000 mm Safety Protections Code: W 105 More details: https://bottlingscout.com

Used Used Blower Sidel PET 10/10 Four 1994: Year: 1994 Condition: As Is Used Blower Sidel PET 10/10 Four 1994: Model: SB010/10 FOUR Year: 1994 Speed: 10.900 bottles/hour Preform: 1881 15 gr PCO 1881 (0.5 l) and 26.5 gr ? (1.5 l) Type: rotary Number of molds: 10 Air recovery system not in place Refrigeration unit included AIR COMPRESSOR VAN TECHNOLOGY Model: VAN-37 VSD Year: 2014 Speed: 330 m3/h 10 bar Stages: 1 screw stage ? 1 set; two sets are provided to ensure production continuity in the event of a failure of one set. The set includes a screw compressor + VAN-22 kW booster. AIR COMPRESSOR KOMNINO Model: KP-1000-11/0.8 Stages: 3 Booster 10 bar Safety protections Code: W 108 More details: https://bottlingscout.com

Used Used PET Blower Kosme Ksb 4 L 6.800 bph: Year: 2006 Condition: As Is Used PET Blower Kosme Ksb 4 L 6.800 bph: Year: 2006 Speed: 6.800 Bph Model: KSB 4 L Number of cavities: 4 Compressor not included Chiller not included Preform feeder Preform tipper Formats: Diameter Max. 110mm Length Max. 340mm Volume Max. 2.5 litri 2 Formats included: 1000 ml e 500 ml Safety protections Code: W 101 More details: https://bottlingscout.com

Used Used Sipa blower: Year: 2007 Condition: As Is Model: sfr24 Year: 2007 Speed: 38.000 bph for 1,75 l - 41.000 bph for 1,5 l, 1,25 l, 1,0 l, 0,7 l Rotative 24 cavities 1 set of molds included Air recovery system Linear optical inspection system for preform quality control Supported neck type: PCO 1881 Chiller included Automatic preform feeder Automatic preform crate tipper Bottle ejector installed on the pneumatic conveyor Electrical control panel in Polish, English, and Italian Safety protection Code: W 116 More details: https://bottlingscout.com

Used Used Meccanoplastica Pet blower: Year: 2024 Condition: As Is Model: MIPET 2P Year: 2024 Speed: 1,200 BPH Type: linear Number of cavities: 1 Moulds included (for 250 cc and 500 cc bottles) Preform elevator and orienter Bottle formats produced: - Bottle volume from 0.25 L to 2.5 L - Bottle diameter: 120 mm - Bottle height: 350 mm Machine dimensions/overall size: length 2,900 mm, width 1,600 mm, height (including preform loader): 2,064 mm Safety protection Code: W 119 More details: https://bottlingscout.com

Log band saw Mebor Type: HTZ 1100 Year of Make: 2001 Motor power 22 kW Maximum cutting width 900 mm Maximum cutting length 8000 mm Maximum trunk passage frame width with seat 1450 mm Maximum trunk clearance frame width without seat 1700 mm Clearance height cutting height maximum 700 mm Complete with sharpening machine and spare sharpening discs Saw blade roll diameter 110 mm Saw blade roll width 95 mm Saw blade length 7200 mm Saw blade width 110 mm Including saw blades 7 pieces With log turner 3 hydraulic stem clamps Hydraulic pump 4 kW The height adjustment works electrically via a motor mounted above the sawing unit. The height is adjusted via 2 trapezoidal threaded spindles, which are connected to each other via a chain running in the frame. The saw unit drives itself. The operator goes along. Ready for immediate use and immediately available Dimensions built ...

The machine is in good technical condition; testing is possible by prior arrangement. Max. turning diameter: 350 mm. Max. turning length: 500 mm. Max. bar turning diameter: 79 mm. Max. spindle speed: 3,500 rpm. Chuck size: 10″ (254 mm). Spindle motor power: 18.5 kW. Additional equipment: 1x Morse taper 2 adapter, 1x Morse taper 3 adapter.

The machine is in good technical condition, after prior agreement it is possible to test it. Schaublin 42S CNC lathe Swiss precision CNC lathe with bar passage ø 42 mm, counter spindle, driven tools and two VDI 25 turrets. FANUC 18i control system, max. speed 6,000 rpm. Ideal for precise serial turning of bar stock - stainless steel, titanium, brass, aluminum, steel. Bar feeder Spacesaver SS2003 Compact bar feeder for diameters up to ø 42 mm. Automatic feeding, space-saving. Tool holder set VDI 25 Complete set - turning, drilling, milling and threading holders. The machine is immediately fully equipped,

NEGRI BOSSI 55 T type V55-200 CANBIO? Force de fermeture : 55 T Diamètre vis : 28 mm Rapport L/D : 20 Volume d’injection : 92 cm3? Capacité d’injection : 84 gr de PS? Pression d’injection : 2100 bars? Épaisseur moule mini/max : 120/350 mm ?Entre colonnes H-V : 315 x 280 mm Dimensions des plateaux : 455 x 430 mm? Commande : DIMI EL 2 Interface colorateur ?Noyaux hydrauliques : 1? Noyau air : 1 Dimensions. : 3,72 x 1,18 x 1,80 m Poids : 2000 kg

WAIDA CNC OPTICAL PROFILE GRINDER Manufacturer: WAIDA, Japan Model: PGX-2500N Year: 2002 Type: CNC Optical Profile Grinder Country of Manufacture: Japan Quantity: 1 unit Machine Description High-precision CNC optical profile grinder suitable for manufacturing and regrinding precision punches, dies, cutting tools, molds, and complex profiles. Suitable for applications in the electronics, automotive, aerospace, and precision mold industries. Main Specifications Spindle maximum speed: 20,000 rpm Power supply: 200 V / 3-phase / 50 Hz Machine execution: Metric Control: CNC Language: English Grinding wheel: 75 mm wheel flange Included Standard Accessories Wheel opener Tool box Magnifier Magnetic chuck Dry dust collector Spindle chiller Lubricator Special Accessories / Options Dry dust collector Magnifier ×4 Projector lamp voltage ad ...

Key data: 2000 , 50

KRAUSS MAFFEI 200 T type CX 200-750 Clamping force: 200 T Year: 2011 33 000 operating hours Screw diameter: 50 Injection volume: 393 cm3 Injection pressure: 1892 bars Tie-bar spacing: 560 x 560 mm Opening stroke : 700 mm Maximal distance between platen : 1050 mm Power install : 37 KW Dimensions : 5,20 x 2 x 2 m Weight : 11 500 kg

Key data: 3200 , 694 , 60

FERROMATIK MILACRON K 320-S injection molding machine Clamping force: 320T / 3200 KN Year: 1997 Screw diameter: 60 Injection weight : 694 gr Injection volume: 710 cm3 Injection pressure: 2144 bars Tie-bar spacing: 750 x 750 mm Weight : 18 800 kg

bore capacity in steel (diameter): 32 mm arm length: ca. 920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. ram stroke: 600 mm throat: ca. 400 – 800 mm table diameter: - mm : 320 mm total power requirement: - kW weight of the machine ca.: 8 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2890D : China : 210 € : 1 : 160 mm : 50 mm : 125 mm MINT CONDITION turning base for drilling-, shaping- and milling machines mechanical clamping vice bocy made of cast iron (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 280 mm turning length: 400 mm control: Fanuc 18 T spindle bore diameter: 51 mm number of controlled axis: 2 turning speed range: 0 - 4000 U/min rapid speed: 30 m/min number of tapers in turret head: 12 VDI 40 tail stock: Ja dimensions: 3,9 x 1,6 x 2,1 m weight of the machine ca.: 3,9 t power requirement: 15 kW Used CNC- Lahte with box way, 2 axis - 3 jaw chuck Ø 200 mm - chip conveyor - oil dust collector The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ball wheel with DIAMOND abrasive, for the DAREX milling machine model E-90. New, never used, with traces of storage.

Bushel grinding wheel with CBN abrasive, for the DAREX milling machine model E-90. New, never used.

Combined dressing and thickness planing machine from Hofmann with the legendary Leitz-Wigo spiral knife shaft, very robust mechanical engineering in a compact design Special feature of this machine: The dressing table does not have to be opened for thickness planing, so no conversion is necessary With a "real" spiral wave. Planing width approx. 620mm Thickness table electrically adjustable with digital display, fine adjustment by handwheel Fluted steel feed roller rubberized pull-out roller, new Planing height approx. 4 - 240mm 2 feed speeds 7 + 14 m/min Table length 2520mm Drive motor 5.5kW with automatic motor brake 2-knife shaft with spiral-shaped, resharpenable HSS knives there are two sets of spiral knives, each built into matching pressure jaws. Resharpening is carried out by the sharpening service, and the sharpened knife sets are then simply screwed into the plani ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 97400 € : 1840.86 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommende ...

: gebraucht : 2005 : 4541 : prompt, Zwischenverkauf v : China : 5700 € : 1 : 40 - 1.300 U/min : ISO 30 : 465 x 230 x 380 mm : 1000 x 280 mm : 2.2 kW : 1400 mm : 1300 mm : 2200 mm : 1120 kg : 90 ° : 115 - 1.750 (115, 230,290 U/min Milling head rotatable and swivellable +/- 90° with manual quill 120 mm travel range Spindle sleeve feed takes place via a turnstile or with the fine feed by means of a handwheel Spindle head 350 mm manually traversable Max. drilling capacity 30 mm Manual tool clamping vertical/horizontal by means of tightening screw Automatic feed in X Axis,(8) 12 - 370 mm/min Coolant unit Chip tray Lighting 1x Collet chuck set 1 Stk Drill chuck with mounting 4 Milling cutter holders Does not comply with the German UVV &, Austrian AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5200 € : 100.36 € : 1270 mm : 1.5 mm : 75 mm : 1.5 kW : 1830 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 8700 € : 167.91 € : 250 mm : 6 mm : 3 mm : 25 1/min : 90 ° : 4 kW : 950 mm : 780 mm : 1115 mm : 585 kg Hydraulic drive Automatic adjustment of the blade gap 2 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to ",CE", regulations User manual in English or German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 12900 € : 247.68 € : 40 to : 285 mm : 200x24 mm : 660x1250 mm : 250 mm : 80 mm : 10 mm/s : 10 mm/s : 4 kW : 930 mm : 1250 mm : 650 mm : 1250 mm : 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12300 € : 236.16 € : 1270 mm : 4 mm : 120 mm : 3 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1110 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 81500 € : 1540.35 € : 8 mm : 5 mm : 80 mm : 10 mm : 4500 mm : 720 mm : 95 (R 80) / 35 (R 25) mm : 11 kW : 4900 mm : 1700 mm : 2700 mm : 4550 kg incl. flanging rolls for mild steel (R25) incl. cutting blade top and lower roll driven by hydromotor and plantary gear box possible to flange both, flat and crowned bottoms hydraulically adjustable bottom height cutting and flanging on the same head lateral support rolls operator panel with touch screen Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 030138 : prompt, Zwischenverkauf v : Deutschland : 3444.77 € : 1 : 13 mm : MK 2 : 220 mm : 40 - 4000 U/min : M 10 (steigungsabhängig) : 520 mm : 400 mm : 850 mm : 62 kg : 60 mm : 85 - 370 mm : 420 mm : 300 x 250 mm : 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) ALTERNATIVE: Version with B16 spindle (Art. no.212500) The dat ...

Cartoning machine for plug-in closure

Manufacturer Machine Type Model / Description Albeko Marking & Badge Attachment BP102 Heel Counter Press Albeko Marking & Badge Attachment BPH 300 Embossing Machine (+ 2 Digits) Atlas Copco Air Compressor GA15 Rotary Screw Air Compressor Atlas Copco Air Compressor GA15VSD Variable Speed Rotary Screw Air Compressor ATOM Bridge Die-Cutting Press S525/2102 Punching / Die-Cutting Machine Bombelli Seam Processing Seam Rubbing / Flattening Machine Brother Pattern Sewing Machine BAS-326G-01A Automatic Programmable Pattern Sewer Brother Bartacking Machine KE-430-HX-05 Automatic Programmable Bartacking Machine Colli Trimming Machine GP-20 Edge Trimming Machine Dürkopp Adler Post-Bed Sewing Machine 888-160122-M 1-Needle Post-Bed Sewing Machine Dürkopp Adler Post-Bed Sewing Machine 888-260122-M 2-Needle Post-Bed Sewing Machine Dürkopp Adler Post-Bed Sewing Machine 888-356122-M 1-Need ...

ENGEL DUO 500 T type 4550/500 pico Force de fermeture : 500 T / 5000 KN Année : 2013 Nombre d’heures : 48 000 h Diamètre vis. : 90 mm Volume injectable : 2480 cm3 Entre colonnes : 830 x 915 mm Dimensions des plateaux : 1270 x 1260 mm Epaisseur moule min/max : 350/900 mm Ecart maximal entre plateaux : 1650 mm Dimensions : 7,80 x 2,40 x 2,36 m Poids : 14 T + 7 T

: neu : 2025 : 090086 : prompt, Zwischenverkauf v : Türkei : 7400 € : 142.82 € : 1 : 197 mm : 4 mm : 2 mm : 20 1/min : 90 ° : 4 kW : 890 mm : 780 mm : 1115 mm : 550 kg Hydraulic drive Automatic adjustment of the blade gap 2 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to ",CE", regulations User manual in English or German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 134000 € : 2532.6 € : 3100 mm : 25 mm : 25 mm : 20 mm : 20 mm : 20 mm : 16 mm : 360 mm : 360 mm : 270 mm : 60 mm : 1510 mm : 22 kW : 5560 mm : 2060 mm : 2050 mm : 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solut ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 74030 € : 1399.17 € : 610 mm : 600 mm : 600 x 300 mm : 600 x 300 mm : 420 kg : 700 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 0,001 - 32 mm : 350 mm : 440 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 2000 1/min : 5,5 kW : 0.75 kW : 1.1 kW : 1.1 kW : 2710 mm : 2428 mm : 2200 mm : 3500 kg : 975 mm : 355 x 50 x 127 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working area grinding wheel grinding wheel flange grinding wheel ...

Manual machine for foiling products into plates For packing HCF food products placed in trays, on a backing of cardboard or other material, it packs, cuts and sticks together under slight pressure of the pad on the heating plate! The machine is designed so that there is no need to adjust the temperature of the clumping heater and the linear knife. Film width from 250 to 500 mm.

Offer 26182 Technical data: - Drilling capacity in steel ST 60 approx. 75 mm - Drilling capacity boring approx. 90 mm - Thread cutting up to approx. M 60 - Drilling spindle holder MK 5 - Drilling spindle stroke 380 mm - Radius min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the boom approx. 1380 mm - Min. / max. distance: - Spindle – base plate approx. 370 - 1750 mm - Machined base plate clamping surface approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feeds 0.09 - 0.75 m/rev - Drilling spindle drive 400 V / 10 kW - E - Central clamping - Coolant device - Dice table - various mounts + drill - Space requirement approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 8000 kg

Banderolierer Akebono OB 301 N; cleaned and tested; Large roll magazine; Bandwidth 29mm; Product size 380x200mm; Foot switch. Banding machine Akebono OB 301 N; cleaned and checked; Big Roll Magazine; band width 29mm; package size 380x200; foot switch.

Key data: 800 kN, 100 g/PS, 35 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: ENGEL Type: VICTORY 330/80 TECH Year of Make: 2012 Clamping force: 80 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 110 ccm³ Moulded part weight 100 g/hp Control: CC200 Equipment: -Robot, manufacturer: SEPRO, type: AXESS -2 x Core Pulls -Blow-out valve -Conveyor belt -Security fence

Specification Injection Moulding Machine Demag Ergotech 100/420-600 concept General data Clamping force: 1,000 kN (100 t) Year of Make: 2000 Control: Demag NC4 / ergocontrol Clamping unit Handlebar spacing (H x V): 420 x 420 mm Tool installation height min.: 250 mm Opening travel: 750 mm Ejector force: 41 kN Injection unit Screw diameter: 35 mm Injection unit: 600 Location: Aachen, Germany

Ledinek Superles 400 4V/4F Planing Width 410mm Planing Height200mm

Thickness planing machine Fabr SCM Model S 50 Engine 5.5 Kw 4 knife shaft Feed rate 7.5-25 m/min Planer width 500 mm Planer height 240 mm 2 reels in the table

Wrapping Machine Fabr Böhl Type BSB-45 SX-2 YOC 2004 Total connection 2.5 kw Product Measurements Width 5-250 mm Height 5 - 250 mm Length 600-6000 mm Machine weight 950 kg with rolling tables

Specification Injection moulding machine Demag IntElect 100/420-410 (all-electric) General data Clamping force: 100 t (1000 kN) Year of Make: 2007 Control: NC4 / MC4 Injection unit: 410 Screw diameter: 40 mm Clamping unit Clearance spar spacing: 420 x 420 mm Machine weight: approx. 5,000 kg Equipment: 2 x hydraulic core pull Location: Aachen, Germany

Specification Injection Moulding Machine Demag Extra 35-80 General data Clamping force: 35 t Year of Make: 2007 Control: NC4 / MC4 Clamping unit Size of the clamping plates: 390 x 390 mm Lights spar spacing: 280 x 280 mm Ejector force: 26 kN Ejector travel: 100 mm Injection unit Screw diameter: 22 mm Spec. Spray pressure: 2061 bar Spray volume: 42 cc Injection weight in hp: 37 g L/D Screw Ratio: 20 Machine weight: approx. 2,200 kg Equipment: hydraulic core pull, pneumatic valve Location: Aachen, Germany

Specification Injection Molding Machine Ferromatik (Milacron) Magna T Servo 110-450 General data Clamping force: 110 t Year of Make: 2017 Drive: Servo Clamping unit Lights spar spacing: 435 x 435 mm Tool installation height: min. 150 / max. 480 mm Opening travel: 350 mm Max. plate spacing: 830 mm Injection unit: 450 Screw diameter: 40 mm Location: Aachen, Germany