heidelberg machines used for sale

Chiller - MTA TAE EVO 161 Cooling capacity 55 kW Refrigerant R410A The device has: - Compressor x 2 - Separate container for medium - Circulating pump - Heat exchangers - Radiator - Fan x 2 The device after maintenance, fully functional 3-month operation warranty in Poland

Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 160 mm Pneumatic workpiece clamps Manual feed Weight: approx. 200 kg

Key data: 3 mm

Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Largest radius: 500 mm Stepless speed adjustment via handwheel Clockwise and counterclockwise rotation Hydraulic infeed via foot switch Weight: approx. 550 kg Other tools on request

Single Head Corner Welding Machine

Manufacturer: KEMPER Drives/motors: HEW Herford + ABM Greiffenberger Main Engine Type: RR 160L/84 S Country of manufacture: West Germany (Germany) — a machine probably from the 80s/90s. Type: spiral bakery kneader with fixed bowl Controls: 2 speeds Automatic cycle Timer emergency STOP

Rotox Water Slot Mill

Max. pipe extension length: 3,000 mm 4-fold bending angle preselection with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Includes pre-assembly device with hydraulic cylinder Deburring unit for tubes inside and outside from 6 - 48.3 mm Tools included: Bending mandrels: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Bending shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg

Inv. Num. : 6826 Type: TruLaser 3030 Producer: Trumpf Created: 2010, GO 2020 Parameters: Laser ON: 74680 Beam ON: 29226 Laser power: 6 kW Work table length: 3030 mm Work table width: 1500 mm Source: TruFlow 6000 Equipment: Cooling Suction

Key data: 320 mm, 305 mm, 5000 1/min

FANUC i Series Control 12-station turret (not driven) Travel X= 175, Z= 330 mm Bar Passage 51 mm Tailstock Chip tank IEMCA BOSS 545/32 E Bar Feeder

Inv. Num. : 9144 Type: Bylaser 4400 Producer: Bystronic Created: 2010 Parameters: Laser power: 4.4 kW Work table length: 4000 mm Work table width: 2000 mm Maximum table load (uniform): 1760 kg Maximum sheet metal cutting thickness (steel): 20 mm Number of tables: 2 Equipment: Impulse cutting Donaldson 5.5 kW Suction

EMAG VTC 250 Vertical lathe GENERAL Project No.: 906007 Quantity: 1 pcs. Manufacturer: EMAG Type: VTC 250 Control: Siemens 840 D Year of Make: 2008 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION TURNING Max. turning length 630 mm Max. chuck diameter 200 mm Max. speed main spindle 5000 1/min Max. power main spindle at ED 10-40/100% 38/29 kW Max. torque main spindle at ED 10-40/100% 250/200 Nm Full-clamping cylinder on the main spindle Tailstock NC-controlled Revolver left Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min Revolver right Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min OTHER EQUIPMENT Tool measurement using lasers  ...

PFAUTER PE 150 Hobbing machine GENERAL Project No.: 906008 Quantity: 1 pcs. Manufacturer: PFAUTER Type: PE 150 Control: Siemens 840 D powerline Year of manufacture: 1991/2009 Condition: Used machine Engine Approx (hrs): 33500 DESCRIPTION GEAR CUTTING Max. head circle diameter 150 mm Carriage stroke Z'-axis 200 mm Travel in X 150 mm Module 1-3 mm Bevel angle +30 to/to -45 degrees Max. tooth width 150 mm Max. diameter hob 130 mm Max. length of hob 220 mm Tailstock OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Electrostatic oil/emulsion mist extraction system Chip conveyor Engine is/was operated with oil Coolant Setup Circumferential Parts Storage Belt GENERAL TECHNICAL DATA Mains fuse 100 A Total power requirement 49 kVA Machine dimensions (LxWxH) approx. 5820x4047x2810 m ...

DOOSAN VCF 850 LSR II is a multi-purpose, vertical machining centers suitable for a wide range of applications. 1993 working hours (like new)

Oxy-fuel cnc cutting machine. Prestine condition.

Rebord (Samed) Darix 46/100 semiautomatic casemaker year 2015 Size max. 46 x 100cm hot melt gluing weight 800 kg good condition

We are offering for sale a complete used longitudinal beam welding line, comprising the following equipment: MACHINE 1 - TACK WELDING DEVICE - Manufacturer: Wehling - Type: Heftvorrichtung Langsträger - Year of Construction: 2015 - Power: 0.25 kW + 28 x 0.06 kW - CE Marked: Yes Technical Specifications: - Maximum beam length: 13,700 mm - Beam height range: 70 to 500 mm - Flange width: 150 mm and 120 mm (after conversion) - Flange thickness: 5 to 20 mm - Web plate thickness: 5 mm (to DIN 2768-1 tolerances) - Tack position: trough position, 45 degrees - Changeover time per beam pair: max. 10 minutes - Total unit length: 14,300 mm - 28 servo motors for individual height adjustment of beam supports - Rotatable base frame: 0 to 45 degrees - Permanent magnet clamping of the top flange - Siemens S7 control system - Touch screen operator interface - NC axis with programmable software switch ...

Rebord (Samed) Darix Evolution Pos semi automatic casemaker year 2017 automatic board feeder Size max. 46 x 90 cm hot melt gluing Weight 1.600 kg good condition

Manufacturer: LAIP Model: 198-HT Type: High Temperature Yarn Dyeing Machine Year of manufacture: 2008 Condition: Used, was working before dismantling TECHNICAL SPECIFICATIONS - Package diameter range: 1760 to 3000 mm - 2 sets of carriers, each set with 2 carriers - Spindles for 21 cm diameter packages - 64 bobbins per level - Total PES dyeing capacity: 1,300 kg - Control system: 777 Setex controller - Designed for synthetic yarns, primarily PES (polyester Find more here - .ucymachines/ Contact us at - sales@ucymachines

Hebrock K34 Edge thickness up to 8mm PLC Screen Control with 15" Touch Screen Pre-milling unit for attaching in front of the gluing part (3mm) Glue basin with alternating basin and adhesive spout device Edge height max. 60 mm Cross-cut unit Milling unit flush/radii/chamfer milling Corner Round Unit Radi/Chamfers Multiradius scraper blade /R1/R2) Nesting Wing Scraper Release agent spraying device Year of Build 2023, 52 Hours Machine is MINT in TOP CONDITION From joinery liquidation / retirement from the carpentry workshop

Key data: 11000 kN

ENGEL DUO 1100 T injection moulding machine – ES16050/11000 – ENGEL robot included For sale: ENGEL large-tonnage injection moulding machine model ES16050/11000 DUO, designed for demanding industrial production and large technical parts. Machine in very good working order, fully operational. General information • Manufacturer: ENGEL • Model: ES16050/11000 DUO • Year: 1999 • Type: Injection Molding Machine • Condition: Very good condition (used) • Operation: Fully functional • Hours of service: 86,200 hours Technical characteristics • Clamping force: 11,000 kN • Screw diameter: 150 mm • Injected volume: 10,955 cm³ • Injection pressure: 1,330 bar • Column diameter: 230 mm • Opening stroke: 1,800 mm • Ejection force: 215 kN • Ejector stroke: 300 mm Dimensions • Plate dimensions: o Width: 1,400 mm o Height: 1,150 mm • Total weight ...

Key data: 1300 mm, 2 , 150 mm

Wide belt grinding machine 1300 mm 2 Volume

Key data: 1000 mm, 450 mm

Inv. Num. : 9150 Type: CNC 10 A/B Producer: DÖRRIES Created: GO 2015 Parameters: Control system: Siemens Sinumerik SL Table diameter: 1000 mm Engine power: 69 kW Max. workpiece diameter: 1500 mm Max. workpiece height: 450 mm Max. workpiece weight: 5000 kg Maximum table speed: 2-120/ 20-400 1/min Equipment: Chip conveyor 4-position turret Hydraulic/Manual 3-Jaw Chuck

BEKUM BA 52 snowblower – 6L accumulator head – up to 60 liters For sale: BEKUM BA 52 blow molding machine, suitable for the manufacture of high-volume containers and technical parts. Robust machine known for its reliability in industrial production. Technical characteristics • Brand / Model: BEKUM BA 52 • Type: Blow Molding Machine • Station: Single Station • Clamping force: 450 kN • Control: Original BEKUM control • Extruder: S 701 • Head: 6 liter accumulator head • Maximum production volume: up to 60 liters Mould dimensions • Length: 1200 mm • Width: 750 mm • Depth: 2 × 150–300 mm Ideal machine for the production of high-capacity canisters, tanks, technical containers and blown parts. Machine visible on site. Photos and additional information available on request.

Edge banding machine Brandt type KDF 890 Technical data: - Description: see machine photos

TECHNICA ZSM 5100 center grinder for long shafts max L = 1000 Centering bore diameter 3 - 60 mm, workpiece clamping range 4 - 220 mm, workpiece length 50 - 1000 mm, workpiece weight max. 120 kg, centering bore angle 60°, grinding head adjustement max. 160 mm, grinding spindle speed 10000 - 45000 rpm, dressing stroke of the grinding disc dressing unit max. 40 mm Machine under power in our warehouse Mimu Machine Tools Gussago BS Italy

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Ø min/max to be rectified: 1.5 / 120 mm, Regulating wheel width: 254 mm, No. of regulating wheel speeds: Infinite, Regulating wheel speed nº: Infinite, Min/max speed of regulating wheel (r.p.m.): 10/250 rpm, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dimensions of the regulating wheel (OD x ID x W): 305 x 190.5 x 254 mm, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Maximum length to be rectified in plongeé: 254 mm, Power hydraulic motor: 0.55 Kw., Hydraulic motor power: 0.55 Kw., Total power: 27 Kw., Voltage: 220/380V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Tall: 1.900 mm, Weight: 6.420 Kg.

control: Fanuc Series 31i - B workpiece length - max.: 300 mm grinding wheel diameter: 356 mm grinding wheel width: 75 mm quill stroke: 45 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 375 mm workpiece height: 350-375 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, after prior agreement it is possible to test it. Travels 220 x 160 x 100 mm, can be cut with wire from 0.02 to 0.2

Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Four-sided planer copper mill Model: VUIN 605 Planing width 605 mm Planing height 200 mm between upper and lower planing shaft Planing height of vertical planing heads 100 mm With additional horizontal unit Predressing table Length 1750 mm x width 400 mm, adjustable up to 12 mm Predressing shaft with 4 knives width 340 mm and Jointing cutter 20 mm, motor power 4 kW With pull-in device from above, swivelling Planing shaft bottom 5.5 kW Planing shaft top 10 kW Planing shaft right 4 kW Planing shaft left 4 kW All planing shafts as 4-knife shaft right and left spindle 4 knife shaft, equipped with 2 knives each Thickness table adjustment motorized adjustable Feed rates 7-9-11,5-14-18-23 m/min. Feed motor motor power 4 kW 3 fluted feed rollers 3 smooth table rollers 1 smooth pull-out roller Planing height minimum 3 mm Shortest piece length 350 mm The pictures s ...

Dear Ladies and Gentlemen, at the Bruchsal location we offer a used machine for sale without obligation: Worm Gear Milling Machine Gear Shaping Machine Manufacturer: Gleason Pfauter Type: GP200 Year of Make: 2002 Weight: approx. 9.7 t If you are interested, please leave us an offer until 15.06.2026, taking into account the following points: If you have any questions or would like to arrange a viewing appointment (from 01.06.2026), please do not hesitate to contact us.

Semi-automatic Cutting thickness 0.5 - 8mm, (without offshoots up to 24mm) ideal for meat or sausage/cheese Knife diameter 330mm with automatic acceptance of the section dig. Control Material to be cut: max. 250 x 120 mm

3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 260 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop dimension 5600 x 2200 mm weight 8 ton

Inv. Num. : 9154 Type: 17-10 FP NC/5 Producer: Waldrich Coburg Created: 1985, GO 2011 Parameters: Operating system: Sinumerik 840 Table length: 5000 mm Table width: 2500 mm Max. workpiece weight: 60000 kg Weight: 125000 kg Coolant leaks out in the spindle area of the machine. GOs were carried out on the machine in 1997/2008/2011.

380 V 16 A Collet holder d 6 Length 70 cm Width 30 cm Height 60 cm Color: Green

380 V 16 A Collet mount, nut is missing. Length 40 cm Width 30 cm Height 50 cm Color: Gray

Flow divider: 2 lane, Belt width: 270 mm, Power: 3 x 400V, 50Hz, 16A, Dimensions: 1750 x 1350 x 1900 mm

With outfeed belt of 400 mm and variable speed of top- and bottom belt., Belt width: 410 mm, Power: 3 x 400V, 50Hz, 1.2kW, Dimensions: 2200 x 800 x 1300 mm, Weight: 460 kg

In combination with FCA or ICA type clipper, Labels: 60.3 x 19.8 mm, Printing range: 38 x 18 mm, Printer: Kortho hotprinter, Compressed air: 6 Bar, 0.2Nl/cycle, Power: 230VAC, 50Hz, 2.2kW, Dimensions: 550 x 600 x 1400 mm, Weight: 80 kg

grinding diameter: - mm grinding length: - mm centre height: - mm mechanical: ja centre distance: 2000 mm weight of the machine ca.: 7,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatische bandzaag ronde inhoud: 360 mm Capaciteitsvierkant: 360 x 360 mm spanentransporteur Depth of throat: 360 mm Max height of workpiece: 360 mm Table travel : Manual (1) -- hydraulic (2): hydraulic Sawspeed: 20 > 80 m/min Length of band saw: 4420 x 32 x 1,1 mm Power needed: 3,7 kW Length : 2500 mm Depth : 2200 mm Height: 1600 mm Weight: 2 ton

turning diameter: 256 mm turning length: 530 mm control: Fanuc 31i-A turning diameter over bed: 550 mm turning diameter over cross slideways: 350 mm main spindle:: max. turning speeds: 6000 min/-1 Drive power - main spindle: 11 kW max. torque: Nm max. rod diameter: 45 mm spindle head: A2-5 chucking diameter: mm tool turret:: shaft height for square tool: 25 mm Drill shank diameter: 50 mm travel:: x-axis: 210 mm z-axis: 560 mm feeds:: rapid traverse: x 20 / z 24 m/min total power requirement: kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 m Technical Specifications: - Manufactured in 2017 but not put into operation until 2021 - Fanuc 31i mod A CNC control - Y-axis - 20 bar tool cooling - Fedek bar loader - Chip conveyor - 12-station tool turret - 10 rotating tools The data for this ad was created with ModulMWS - the software solution o ...

module: 10 diameter: 180 mm Bore diameter: 40 mm width: 75 mm : 2 weight: 14 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 400 mm centre distance: 3.000 mm max. swing over bed: 810 mm max. swing over facing slide: 510 mm max. swing-dia. in gap: 850 mm control: WEILER max. workpiece weight: 3.800 kg spindle diameter in front bearing: 150 mm spindle bore: 106 mm faceplate diameter: 630 mm worktool system: Parat tailstock quill taper MT: 6 dia. of quill: 115 mm spindle turning speed - stepless: 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition and can be inspected under power at any time. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - -  ...

module: 4 diameter: 180 mm Bore diameter: 40 mm width: 67 mm : 5 weight: 15 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ELB ELB Super Rubin 020 VA II CNC surface grinder High-precision horizontal surface grinder, specialized for profile punches grinding. With 4 added digital axes CNC Control Wireless Handwheel Bluetooth control Magnetic Table 600 x 300 mm Movements axis X/Y/Z: 650/300/250 mm 4th axis- rotational Grinding wheel: -Dia 300 mm -width 40-50 mm -bore size 76,2 mm Spindle speed 1400-2800 rpm Total power requirement 5,5 kW Weight of the machine ca. 3,4 t 4th axis devices: -Punch former PF350 V-block -Punch former PF650-ER20 -Punch former PFD-ER40 -Punch grinder PGAS- centreless Accessories: Collets Radius and angle dresser RDC Sinusoidal-table for devices SPF 50 Balancing rack for wheels LBS 14 surface grinder High-precision horizontal surface grinder, specialized for profile punches grinding. With 4 added digital axes CNC Control Wireless Handwheel Bluetooth c ...

- technically efficient, ready to work – after full service - disc diameter: 450 mm - bottom cutting - cooling and lubrication system - vertical pneumatic clamps - protective cover - compressed air preparation station

Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories:, Total enclosure,, SK 40 or 50 workpiece carrier according to preference,, Cooling unit for dielectric,, Automatic fire extinguishing system,, Measuring probe,, SK 40 or 50 measuring mandrel depending on workpiece carrier,, Alphanumeric keyboard for data management,, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions,, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes,, Software package for profile tools, 4-path program for peripheral electrodes,, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries,, Automatic central lubricat ...