heidelberg machines used for sale

Key data: 10000 , 11690 , 155

Presse à injecter SANDRETTO MEGA T 17750/1000 Force de fermeture : 1000 T Diamètre vis : 155 mm Volume théorique d'injection: 11690 cm3 Longueur utile de la vis L/D : 20 Capacité d'injection max : 1450 Capacité de plastification : 275 Pression d'injection : 1520 bars Zone de chauffe : 6 Puissance total de chauffage : 105 KW Epaisseur moule min/max : 450mm /1350 mm Course plateau mobile : 1350 mm Dimensions des plateaux : 1820 x 1820 mm Passage entre les colonnes : 1230 x 1230 mm Diamètre des colonnes : 220 mm Quantité d'huile contenue : 1900 L Dimensions : 15,1 x 3,15 x 2,81 m Poids total : 87 000 KG

PVS natural casing welding devices replace the knotting of the sausage ends or the closure of the sausages with a clip The system is suitable for natural casings, sheep casings and pig casings. The advantage to conventional applications is that there is no need to remove knots or clips before packing

Key data: 1000 , 3420 , 110

DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2001 Machine with very low working hours Type: 1000-8000 NC4 Clamping Force: 1000 T / 10 000 KN Screw Diameter: 110 mm Theoretical Injection Volume: 3801 cm³ Injection weight. : 3420 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Total Installed Power: 110 kW Oil Capacity: 2000 L Dimensions: 13.2 m x 3,20 m x 2,90 m Weight: 63 tons Machine sold with a STAR robot

Key data: 11000 , 1950 , 150

Presse à injecter ENGEL 1100 T Année 1999 Nombre d’heures : 85 000 h Force de fermeture : 1100 T - 11 000 KN Diamètre vis : 150 mm Volume injectable : 10950 cm3 Pression d’injection : 1330 bars Diamètre des colonnes : 230 mm Force d’éjection : 215 N Dimensions des plateaux : 1400 mm x 1150 mm Course d’ouverture : 1800 mm Poids : 77 Tonnes

Souffleuse MECCANOPLASTICA type MP1 - D En très bon état de fonctionnement Année : 2001 1 tete double et 2 postes Controleur de paraison 64 point MOOG Force de fermeture : 35 KN - 3500 kg Volume max du contenant. : 1,5 litres Diamètre vis : 60 mm 4 ventilateurs de refroidissement Puissance maximale de chauffe : 20 KW

BATTENFELD FISCHER BEKB 175 T blow molding machine - 29 kg of PE - 300 liters BATTENFELD blow-moulding machine capable of extruding parts up to 4500 mm. Machine equipped with a 40-liter accumulation head. HDPE capacity: 28.8 KG Closing force: 2 x 175 T with knee-bar locking system Machine equipped with 2 x 125 mm screws (20/D ratio) Capacity: 149 KG / H at 25 RPM Max screw speed: 40 RPM Blowing pressure: 7.5 bar (12-bar compressor available if required) 3-material volumetric screw dosing system (virgin material, regrind and colorant) Machine equipped with unloading clamp Can be sold with a RAPID GK 8045 shredder Machine sold with a 260 mm diameter die and a 300 mm die. It is possible to equip this machine with a 500 mm die.

Key data: 11000 , 13254 , 150

Presse a injecter ITALTECH BS 1100 T Type : BS-1100/13250 Année : 1999 Diamètre vis : 150 mm Volume injectable : 13254 cm3 Pression d’injection : 1520 bars Epaisseur moule : 450 - 1350 mm

Key data: 1100 , 353 , 50

SANDRETTO serie 8 430/110 Clamping force : 110 T Distance between tie bar : 415 X 415 mm Platen dimensions : 610 X 610 mm Mould thickness min / max : 100 - 460 mm Opening strocke : 410 mm Injectable volume : 353 cm3 Pressure on material : 1215 bars Screw diameter : 50 mm Weight : 5700 kg Dimensions : 5,67 x 2,03 x 1,32 m

Key data: 600 , 131 , 35

Injection molding machine SANDRETTO Serie 8 - 60 T Reference : 192 / 60 Screw diameter : 35 mm Injection volume : 131 cm3 Injection pressure : 1450 bars L/D ratio : 21 Distance between tie bars : 325 x 325 mm Platen dimension : 500 x 500 mm Robot interface Dimensions: 5.17 m x 1.17 m x 1.98 m (top) Weight: 4,100 kg

Key data: 4850 , 1768 , 80

SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Condition: Very good Technical Specifications: Clamping force: 485 T / 4850 KN Tie bar spacing: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max): 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Screw diameter: 80 mm L/D ratio: 20 Additional Features: 4 hydraulic cores 1 air blow gun 2 junction boxes with 8 channels each Power panel: Rear: 4 three-phase sockets, 1 neutral, 1 ground Front: 1 three-phase socket, 1 neutral, 1 ground Dimensions & Weight: Weight: 21,500 kg Overall dimensions (L x W x H): 8.71 x 2.65 x 2.14 m

Offer 26018 Technical data: - Max. working length 500 mm - Max. sheet thickness 1.5 mm - Various roller diameters - Drive – brake motor 400 V / 1.4 kW - Space requirement approx. W 850 x D 1700 x H 1250 mm - Weight approx. 0.8 t - Roller attachments 42 ; 45 ; 50 ; 55 ; 60 ; 65 ; 70 ; 90 ; 135 mm

This automated label applicator was used for inline labeling of products.

Polar 115 Autotrim Cutting Line Year 1999 Size 115 Cm Transomat TR 130 EL-4 Jogger RA-4 Lifter LW 1000-4

Key data: 32 mm, 32 mm, 330 mm

CNC Longitudinal Lathe Brand: Star Machine type : SR 32 / 330 Year of manufacture : 1997 Control : - FANUC 16 TCNC Control Location : Hultsfred warehouse Sweden Availability : direct from stock Technical data Max. rod diameter: 32 \[mm\] Main spindle stroke: 310 \[mm\] Main spindle stroke with driven taper: 295 \[mm\] Spindle Power: 7.5 \[kw\] Main spindle speed : 350 – 7000 \[rpm\] C axis on main spindle Number of Turning Tool Holders: 6 Number of powered tool holders: 4 Driven Tools Speed: 350-5000 \[rpm\] Number of tool holders on the combi device: 4 maxi diameter in pick-up spindle: 32 \[mm\] Spindle speed counter spindle : 350-7000 \[rpm\] Power sub-spindle: 3.7 \[kw\] Indexing C-axis sub-spindle: 1° Pick-up spindle stroke: 125 \[mm\] Electrical connected load. : Power: 20 \[kW\] Dimensions: 1700 x 2515 x 1700 \[mm\] W ...

Key data: 6020 mm, 1 mm

with roller scissors and emergency stop rail Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Sheet thickness max. steel 1.25 mm Sheet thickness max. aluminium 1.5 mm Sheet thickness max. VA 0.7 Projection 1000 mm Color: Green Total power requirement 16 A Dimensions 7000 x 1400 x 1400 mm Weight 3200 kg Upper beam stroke (opening width) 150 mm Bending angle (max) 140 degrees Roller scissors yes Number of stands 5 pieces Insertion depth 1000 mm Machine number 301644

Key data: 3000 mm, 4000 mm, 1500 mm

Heyligenstaedt Heynumill 2700-PF 3/5 axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Hsbi Ssyaazmsf Iwxonh Control Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm At Heynumill, the complete hydraulics were renewed in 2018, all electrical cables were replaced, the spindle cooling unit, both longitudinal conveyors were renewed and the heads were completely overhauled. The entire repair cost €160,000. In 2020, the milling gear was renewed.

CNC ball and dome honing machine with turbo separator Workpiece diameter ( balls ) ○22- ○64 mm Workpiece diameter (carrots) ○22- ○64 mm Control: GE FANUC / Series 321i-A Measuring unit: Marposs Type 7/ MHIS For indoor and outdoor measurement Further technical data on request

Offer 25032 Technical data: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 65 mm - Tapping device up to M 60 - Drilling spindle holder MK 5 - Drilling spindle stroke 240 mm - Projection 400 mm - Table with 2 T-slots 720 x 560 mm - max distance table – drilling spindle approx. 850 mm - 4 feeds 0.1 - 0.2 - 0.3 - 0.4 mm/rev - AZ continuously variable transmission with manual transmission - Drilling spindle speeds infinitely adjustable 40 - 1600 rpm - Drive 400 V / 5.5 kW - Space requirement approx. W 850 x H 2480 x D 1350 mm - Weight approx. 1450 kg

Air dough slicer.

The machine is in good technical condition, testing is possible by prior arrangement.

GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.17800 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Pallet C-axis d 630 mm / 24.9 in Speed C-axis 1.000 rpm Integrated balancing sensor  ...

working length: 1000-1600 mm working width: 40-150 mm Thickness: 10-80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 6 St. Working width: 20-230 mm Working height: 8-160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mm centre height: 175 mm b-axis: 1 ° max. dia. of grinding wheel: 500 mm internal grinding spindles: 60000 U/Min c-axis: 0.001 ° weight of the machine ca.: 5.7 t dimensions of the machine ca.: 4.25 x 2.2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 500x300 mm work height max.: 100 mm Weight: 120 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Feed motor: 5,5 kW total power requirement: 58,3 kw weight of the machine ca.: 4000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Injection moulding machine Arburg 820S 4000-4600 BJ 2016

Bread slicer MHS 2015 year

Lathe Mazak QT10B 1997

Inv. Num. : 8749 Type: M2-3120B Producer: FLOW Created: 2011 Parameters: Table dimensions: 2000x3100 mm Spindle power: 6.6 kW

Heckert ZFWVG 250 x 2000 Thread Milling and Spline Hobbing Machine. Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 2000 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Dimensions 3700x2400x1600 mm Total weight 5200 kg Accessories; -heavy duty head -standard head -steady rest -flange -change gears full set

Inv. Num. : 8965 Type: FSQ 80 NC Producer: TOS Created: 1989 Parameters: Control system: HEIDENHAIN NS 700 Work table length: 3000 mm Work table width: 800 mm Maximum vertical spindle speed: 2500 1/min X-axis travel: 3000 mm Y-axis travel: 900 mm Travel Z axis: 1000 mm Machine height: 3500 mm Machine length: 5660 mm Machine width: 4400 mm Machine weight: 18000 kg

Inv. Num. : 8966 Type: Optimat KAL 210/A3/S Producer: HOMAG Created: 2008 Parameters: Control System: Power Control PC 22 Binding height: 950 mm Edge thickness: 0.3-3 mm Part thickness: 12-40mm Feed speed: 18-25 m/min Minimum. Material width: 60 mm Machine dimensions: 8300 × 1300 × 1800 mm

Key data: 12000 , 155

SANDRETTO MEGA T 1200

grinding diameter: - mm grinding length: - mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 5-200 mm grinding depth: 250 mm spindle stock travel: 180 mm spindle bore: 50 mm turning speed range - spindle: 120-1000 U/min weight of the machine ca.: 3 t dimensions of the machine ca.: 2.4 x 1.25 x 1.75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

engraving field: 120 x 120 mm table-size: 250 x 250 mm workpiece weight: max 50 kg Control: Fobagraf machine weight ab.: 1000 kg machine frame made of welded steel construction Cross slide, hard stone design, table top with steel stop iron Height-adjustable laser head Quality-switched ND: YAG laser head, lamp-pumped, 100 W Deflection unit mounted on the laser head (with standard lens) Z-axis with gearbox and servo drive Servo axis control with X-, Y-, and Z-axes Water-cooled Control: Fobagraf user software package Operating system: Windows 2000 operating hours: 17.388 h manual included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting range: M3-M10 in Steel M3-M16 in cast iron M3-M18 in light metal and brass Spindle speeds: 120-240-180-360-300-600 rpm incl. 1 piece of new tap chuck Everything works smoothly and well

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 40 eVo linear With Siemens 840 D sl Operate path control Year of Make: 2016 Travel: X 400 Y 400 Z 375 Speed range: 20 – 20,000 rpm infinitely variable With the following accessories: NC swivel rotary table 450 mm x 400 mm incl. table cooling 60-fold tool changer with double gripper ( HSK 63 ) 3 D Probe Heidenhain Electronic handwheel IKZ 40 bar with paper belt filter Scraper Chip Conveyor Bed Wash Active cooler for control cabinet Spindle Cooling: Water Circulation Cooling Rotoclear Direct displacement measuring system Blowing air d.d. spindle center 3-Piece Height Adjustable Machine Shoes Operating Instructions

HECKERT ZFWVG 250 x 1250 Thread Milling and Spline Hobbing Machine Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 1250 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Weight of the machine ca. 3,40 t Accessories; -heavy duty head -standard head -steady rest -change gears set -centers and arbors -spindle spare -counter weight Will be re-paint in original brown colour.

B&A REF: 9269 TON: 60 SCREW DIAMETER: 25MM SHOT WEIGHT: 45 STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 X 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 550MM EJECTOR STROKE: 125MM AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 4.9KW SCREW DRIVE: HYDRAULIC

Manufacturer: SEAL Model: 80 Pro D Technical Specifications - Maximum processing width: 2,030 mm - Maximum speed: 6 m/min - Maximum material thickness: 38 mm - Maximum roller pressure: 2.5 N/mm - Maximum roller temperature: 140 degrees C - Roller heating: both sides (top and bottom) Machine Dimensions - Width: 2,667 mm - Height: 1,654 mm - Depth: 634 mm - Net weight: 780 kg Transport Dimensions - Width: 2,710 mm - Height: 1,690 mm - Depth: 900 mm - Transport weight: 840 kg Electrical Data - Power supply: 3N/PE 230 VAC +/- 10%, 50/60 Hz, 25A Key Features - Variable temperature, speed and pressure settings - Ergonomic touchscreen control panel on swivel arm (operable from front and rear) - Feed table with tension rollers and fold-down print guide for smooth and even media feed - Longitudinal cutting device for trimming finished products during processing - Foldable pull rollers  ...

GERNEP Labetta labeling system. Built in 2013 with 11 bottle positions, 3 self-adhesive label dispensers and 2 wet glue label dispensers. Output 6K bottles per hour. Servo plate (also for cans). Self-adhesive formats available: 200ml/ 330ml/500ml/750ml. Wet glue format available: 200 ml other formats can be retrofitted. Incl. treadmill and turntable. For more details, please contact us.

workpiece weight: - kg workpiece length: - mm diameter: - mm documentation: vorhanden dimensions of the machine ca.: 4,10 × 1,20 × 1,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FCS SD-600 M injection moulding machine was built in 2009 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. The machine, distinguished by its high efficiency and reliability, is an excellent choice for the economic production of plastic parts. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system operating at a maximum force of 600 tonnes guarantees the high repeatability and quality of the parts produced. In order to fully automate the entire process, a robot works together with the machine. It collects the finished moulded parts from the workspace onto a conveyor belt at the end of the process. The FCS SD 600 M injection moulding machine weighs 24 tonnes. Technical specifications of the FCS SD-600 M injection moulding machine  ...

FCS SD-600MSV injection moulding machine was built in 2015 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. The machine is designed for the economic production of plastic parts of various shapes, sizes and colours. These parts are produced by a reliable injection moulding method. It involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system operating at a maximum force of 600 tonnes guarantees high repeatability and quality of the parts produced. The offer also includes equipment, consisting of, among others, an APEX robot and a conveyor belt. The FCS SD 600 MSV injection moulding machine weighs 40 tonnes. Technical specifications of the FCS SD-600MSV injection moulding machine - control system: FCS-3000 - maximum clamping force: 600 t - mould clamping stroke: 900 mm - screw diameter: 95 mm - injection  ...

FCS SD-600MSV injection moulding machine was built in 2016 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. Technical specifications of the FCS SD-600MSV injection moulding machine - control system: FCS-3000 - maximum clamping force: 600 t - mould clamping stroke: 900 mm - screw diameter: 110 mm - injection volume: 4274 cm3 - maximum injection weight PS: 3890 g - maximum injection pressure: 1307 kgf/cm2 - injection rate: 899 cm3/s - injection speed: 95 mm/s - injection stroke: 450 mm - minimum mould dimensions: 560 x 560 mm - mould thickness: 300-1100 mm - mould mounting platen dimensions: 1290 x 1290 mm - distance between tie-bars: 860 x 860 mm - ejector stroke: 220 mm - ejector force: 11 t - robot: SHINI ST1 - conveyor belt - cooling device (chiller): RIOU RO-30A - temperature controller in the range 0-400°C (8 pcs.) - heating power: 47.2 kW - pump po ...

Key data: 3500 mm, 12 mm

Schäfer SVRM 3500/12 - CNC 4-roll bending machine - Siemens CNC control with joystick for roller positioning and digital display (renewed in 2006) - Hydraulic tilting of the upper roller by control panel - Rollers made of quenched and tempered material with a strength of 900 N/mm² - Year of construction 1989 Technical data - Max. sheet width: 3500 mm - Bale length of rollers: 3550 mm - Max. sheet thickness bending: 12 mm - Max. sheet thickness bending 4xS/3xS: 8 / 6 mm - Max. insertion limit of the sheets at 20% work hardening: 380 N/mm² - Upper and lower roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest radius to be achieved: 220 mm - Feed speed lower roller: 200 mm/min - Feed speed side rollers: 700 mm/min - Total installed capacity: 22 kW - electr. Control: 380 V / 50 Hz / 3 Ph - Machine weight: 21100 kg

grinding diameter: 390 mm grinding length: 650 mm centre height: 200 mm total power requirement: 46 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3x3x2,4 m Universal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mm EMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers the right solution for virtually every user. --> Technical data Max. grinding length: 650 mm --> Centre height: 200 mm --> External grinding diameter: 1 – 390 mm --> Max. weight flying MK4: 100 kg --> Max. workpiece weight between centres: 250 kg --> Feed: --> X-axis travel: 480 mm --> Z-axis travel: 1.150 mm --> Workpiece headstock --> Tailstock --> Grinding spindle headstock --> Coolant device, manufacturer HYFRA, --> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012 ...

Ungerer 1800 x 5 mm Max sheetwide: 1800 mm Max sheetthickness: 0,7 > 5 mm Max speed: 16 m/min Number of flattingcoils: 9+8 rolls (dia 55 mm) Power : 28 HP Weight: 9,7 ton