heidelberg 74 2 used for sale

Control unit, control valve, hydraulic pressure regulator, pressure switch, PressureController -Manufacturer: Parker i, Hydraulic Pressure Controller Type SCPSD-250-14-152 -Pressure range: 250 bar -Accessories: including attachments, see photos -Total dimensions: 210/90/H50 mm -Weight: 0.7 kg

Polishing bench, polishing machine, grinding machine, polishing stand, upright, precision grinder, Electer -Testa: MINIPOL-T with NSK precision grinder and accessories -Precision grinder: Type NSK Electer ET NK-260 N -Accessories: see photos -Transport dimensions: 310/120/H250 mm -Weight: 8.2 kg

Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Seconds meter, measuring instrument, release delay meter -Manufacturer: AEG, Seconds meter, trigger delay meter type S1 -Voltage: 220/110 V 50 Hz -Cardboard dimensions: 145/130/H70 mm -Weight: 1 kg

Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: Clamping aid for workpiece clamping -Bridge thickness: 16/18 mm -Dimensions: 325/247/H115 mm -Weight: 13.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Overall dimensions: 90/70/H95 mm -Total weight: 2.1 kg

Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Material lift: assembly lift lift with cable winch -Load capacity: max. 226 kg -Lifting height: convertible, max. 6.09 m -Equipment: with winch and standard fork -Dimensions: 1700/660/H1360 mm -Own weight: 87 kg

Outside micrometers, micrometer screw, outside micrometer -Manufacturer: Mahr, outside micrometer -Measuring range: 225-250mm -Reading: 0.01mm -Locking device -other sizes: also available -Dimensions box: 400/230/H30 mm -Weight: 2,2 kg

Spiral spring, steel spring, compression spring, round wire spring -Coil spring: steel spring -Diameter: Ø 125 mm -Length: 265 mm -Wire thickness: 19 mm -Number: 2 springs available -Price: per piece -Weight: 6.4 kg/piece

Spiral spring, steel spring, compression spring, round wire spring -Spiral spring: steel spring -Diameter: Ø 123 mm -Length: 260mm -Wire thickness: 19 mm -Number: 1x springs available -Price per piece -Weight: 5.6kg/pcs

Lever gauge, dial gauge, probe, probe -Manufacturer: Rekord, dial gauge weight -Measurement range: 0 - 250 kg -Dimensions case: 160/80/H35 mm -Weight: 0.4 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slots, heavy-duty version -Material: Cast iron -Groove width: 20 mm -Groove spacing 69 mm -Dimensions: 245/165/H130 mm -Weight: 15.1 kg

Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm -Groove width: 22 mm -Dimensions: see photo techn. drawing -Number: 2x clamping angle available -Price per piece -Dimensions: 235/100/H500 mm -Weight: 8.9 kg/pc.

Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm -Number: 1x clamping angle available -Price per piece -Dimensions: 220/100/H500 mm -Weight: 12,8 kg/pc.

Bending tool, die, upper blade, upper tool, straightening tool -Tool: split, for press brake -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 38 x 256 mm -Total length: 148 mm / 1 x 78/70 mm each -Weight: 8 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 3-piece -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 39 x 250 mm -Total length: 1265 mm / 1 x 500/400/365 mm each -Weight: 65 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool angle: 90° -Dimension: 37 x 255 mm -Dimensions: see the drawing in the photos -Length: 100mm -Weight: 4.9 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool angle: 40° -Dimensions: see drawing in the photos -Dimensions: 23 x 234 mm -Length: 50 mm -Weight: 1.9 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool Angle: Radius 12.5mm -Dimensions: see the drawing in the photos -Dimension: 22 x 262mm -Length: 750mm -Weight: 32 kg

Inductive conductivity transmitter, conductivity transmitter, conductivity measurement -Manufacturer: EH Endress + Hauser, conductivity transmitter -Type: conducta XR 2 -Measurement range: 0 to 200 mS -Voltage: 220V 50/60Hz -Dimension: 180/95/H95 mm -Weight: 0.8 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 12 pieces -Tool angle: 28° -Dimensions: see the drawing in the photos -Dimension: 23 x 245mm -Length: 4386 mm / each 1 x 748/730/715/700/400/198/180/150/100/65 mm, 2x 200 mm -Weight: 175 kg

Rail wheel, flanged wheel, track roller, track wheel, wagon wheel -Roller: with angular groove, without bearing -wheel: Ø tot. 218mm -Groove width: 55 mm -Hub: Ø 45 x 52 mm -Number: 3x wheel available -Price per piece -Total dimensions: Ø218 x 87 mm -Weight: 9.9 kg/pc.

Rail wheel, flanged wheel, roller, track wheel, wagon wheel -Roller: smooth design, without bearings -Wheel: Ø 290 mm -Width: 75 mm -Hub: Ø 28 x 70 mm -Quantity: 4x wheels available Price: per piece -Overall dimensions: Ø 290 x 75 mm -Weight: 8.6 kg/pc.

Bracket, holder, support block, retaining support -Bracket: solid construction, 2 pieces -Hole: Ø 48 mm -Screw holes: Hole spacing 165 x 40 mm / Ø 25 mm -Price/Sale: complete -Dimensions: 205/80/H370 mm -Weight: 50 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 240 mm -Transport width: 1150 mm -Shaft: Mounting Ø50 x 185 mm -Quantity: 1 piece available -Total dimensions: Ø 240 x 1520 mm -Weight: 88 kg

V-belt pulley, pulley with taper bushing mount, taper tensioning bushing, taper lock tensioning bushing -V-belt pulley: 4-groove pulley 280/4 -V-belt width: 17 mm -Taper bushing mount: Ø 65 mm (can be replaced) -Quantity: 1x V-belt pulley available -Dimensions: Ø 287 x 82 mm -Weight: 14.4 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 4 grooves 250/4 -V-belt width: 17 mm -Receptacle: Ø 100 mm for taper bushing 3020 (can be changed) -Quantity: 1x pulley available -Dimensions: Ø 260 x 82 mm -Weight: 5.8kg

V-belt pulley, belt pulley -V-belt pulley: pulley 1 grooved 200/1 with bearing - V-belt width: 17 mm -Intake: Ø 45 mm -Number: 1x pulley available -Dimension: Ø 186 x 32 mm -Weight: 5.5kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø56 x 22mm -Item No.: 814 682 65 -Heating power: 250 W -Voltage: 230V -Dimensions: 150/140/H60 mm -Weight: 0.3 kg

Transport trolleys, pipe frame trolleys, drum trolleys, drum tippers -Barrel trolley: Barrel tipper for 200 liter barrel -Barrel support: 2 metal rollers Ø60 x 400 mm -Wheel equipment: 2 castors, 2 wheels -Bracket: for drip tray -Dimension: 990/610/H680 mm -Weight: 20 kg

PLC workstation, communication cable, communication programming cable, connection cable, interface cable -Manufacturer: SMC Pneumatics, connection cable/interface cable, unused, original packaging -Type: ECC-PNAL-232CAB -Cardboard dimensions: 180/100/H35 mm -Weight: 0.1 kg

Barrel rack, barrel support, barrel pallet, barrel trolley, barrel tipper -Keg rack: keg pallet for 200 liter kegs -Recording: can be transported with a forklift, see photos -Number: 2x frame available -Price per piece -Dimension: 1300/800/H275 mm -Weight: 25 kg/pc.

Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Manufacturer: MO Weidmann, material lift assembly lift -Load capacity: max. 225 kg -Lifting height: max 1.78 m -Equipment: with winch, with standard fork -Dimensions: 1240/690/H2230 mm -Own weight: 76 kg

Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Material lift: assembly lift lift with cable winch -Load capacity: max. 226 kg -Lifting height: max 1.77 m -Equipment: with winch, with standard fork -Dimensions: 1700/690/H2230 mm -Own weight: 73 kg

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply -Manufacturer: Reis Robotics, Power Supply Power Supply -Type: PNT350-2-24V/6V5 -Number: 2x power supply available -Price per piece -Dimension: 280/130/H175 mm -Weight: 2.4 kg/pc.

Power converter, power supply, power pack, switching power supply, power supply -Manufacturer: Siemens, SITOP UPS500S Capacitor Power Supply -Type: 6EP1933-2EC51 -Voltage: 24VDC -Dimensions: 130/240/H120 mm -Weight: 1.1 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 21 mm -Groove: 44 x 19 mm -Dimensions: 203/103/H153 mm -Weight: 6.4 kg

Base plate, site fence base, barrier base -Footplates: made of concrete, 19 pieces -Intake: 6x Ø 45 mm -Price/delivery: complete -Dimensions: 620/220/H130 mm respectively -Weight 33kg/pc -Total weight: 627 kg

Probe, touch probe, 3D probe, stylus, probe head, digimatic indicator, scanning head, measuring head -Manufacturer: Heidenhain, scanning head -Type: LIDA 19/200 -ID No.: 233 039-16 -Number: 2x scanning head available -Price per piece -Dimension: 180/90/H40 mm -Weight: 0.3kg/pc.

PLC extension module, switchgear, control, marshalling module, printed circuit board module, measuring adapter -Manufacturer: Reis Robotics measuring adapter -Type: XMC20 Id.Nr: 2364687 -Number: 2x module available -Price per piece -Dimensions: 45/75/H40 mm -Weight: 0.1 kg

Control cabinet socket, Schuko socket -Manufacturer: Murr Elektronik, safety socket 16A / 250V -Type: 67950 -Number: 2x safety socket available -Price per piece -Dimension: 80/45/H70 mm -Weight: 0.1 kg/pc.

PLC control, central module, memory, CPU, central device, central unit, compact device -Manufacturer: Siemens, compact unit Simodrive -Type: D380/30 Mreg-GdG6V55-3A 6 RA 2718-6DV55-0AA0 -Quantity: 1 piece available -Dimensions: 270/170/H290 mm -Weight: 7.3 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Metal Work, compact cylinder type 240400080XP -Stroke: 80 mm -Piston: Ø 40 mm -Piston rod: Ø 12 mm -Number: 2x cylinder available -Price per piece -Dimensions: 133/56/H86 mm -Weight: 0.8 kg/pcs

Grating, grating, light grating, insert grating, insert grating, stair treads, safety steps, grating step, step -Grater step: 800 x 270 mm -Total height: 70 mm -Struts: Wall thickness 2 mm -Floor height: 30/8 mm -Surface: hot-dip galvanized -Quantity: 1 piece available -Weight: 5 kg

2 columns punching tool, cutting tool, punching tool, punch, punching die, punching die, column frame -Punching tool: 2 columns -Stroke: 40mm -Stamp: without accessories, see photos -Dimensions: 245/240/H240 mm -Weight: 30 kg

Gratings, grating, light grids, grid inserts, grid inserts, stair steps, security steps, grating step, step -Grid step: 1200 x 240 mm -Total height: 70mm -Struts: wall thickness 2 mm -Bridge height: 40/10 mm -Gratings: hot-dip galvanized -Number: 6x grids available -Price per piece -Weight: 8 kg/pcs

Four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 200 mm -Passage: Ø 60 mm -Bolt circle: Ø 175 mm -Weight: 13.8kg

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 3-groove pulley 250/4 -V-belt width: 17 mm -Taper bushing mount: Ø 100/107 x 52 mm (can be replaced) -Dimensions: Ø 257 x 65 mm -Weight: 11 kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 4 grooves -V-belt width: 17 mm -Intake: Ø65 x 65 mm -Dimension: Ø257 x 80 mm -Weight: 10.5kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 5 grooves -V-belt width: 17 mm -Intake: Ø38 x 90 mm -Dimension: Ø250 x 135 mm -Weight: 18.3 kg