heidelberg 74 2 used for sale

Connector, plug, sensor module -Manufacturer: Phoenix Contact, Y-distributor 5 pieces ovp -Type: SAC-3P-M12Y/2XM12FS PE -Screw lock: M12 -Price/delivery: complete -Dimensions cardboard: 115/80/H30 mm -Weight: 0.1 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 100 mm -Dimensions: see photo techn. drawing -Dimensions: 250/120/H63 mm -Weight: 10 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Feed flange with drive pin -Outer diameter: 230 mm -Mount: Thread M165 x 3 -Mounting cone: Ø 90 to 110 mm, groove 70 x 16 mm -Dimensions: Ø230 x 160 mm -Weight: 9.4 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Stall bolts: Solar fasteners 49 pieces -Type: M10 x 200 -Price/Delivery: complete -Complete weight: 5 kg

Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg

Bending tool, die, upper blade, upper tool, upper jaw -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100 mm / M10 -Dimensions: see drawing in the photos -Dimensions: 2678/15/H57 mm -Total weight: 15.7 kg

Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg

Radio system, antenna contact component, wireless RF modem, pico cell antenna -Manufacturer: CP Technologies, Pico Cell Antenna 2.4 GHz Ovp -Type: WAN-2185 -Number: 2 antennas available -Price: per piece -Cardboard dimensions: 280/240/H85 mm -Weight: 0.7 kg

Drill sleeve, round rack, rack, sleeve for drilling machine, bench drill, pillar drill, column drill, box-type drill, thread cutting machine, tapping machine -Drill quill: round rack -Recording: MK2 -Dimensions: see photos / technical drawing with dimensions -Dimensions: Ø 62 x 267 mm -Weight: 4.3 kg

Stainless steel tank, stainless steel tank, separator, filter tank, for plastic injection molding machine -Stainless steel tank: separator -Diameter: see photos -Reservoir: with sight glass -Total dimensions: Ø 248 x 435 mm -Weight: 17kg

Slewing bearings, slewing ring, single-row ball bearing, four-point contact bearing, gear ring, steering ring, -Slewing bearings -Type: Drawing No. 281.30.1200.013.11.1503 -Dimensions: see photos -Dimensions total: Ø 1395 x 90 mm -Transport weight: 240 kg

Conveyor belt, belt conveyor belt, metal conveyor belt, wire belt, link belt, round wire link belt -Conveyor belt: link belt stainless steel -Width: 1000 mm -Length: 2890 mm -Thickness: 4 mm -Transport dimensions: Ø 122 x 1000 mm -Weight: 32.7 kg

Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measuring technology, contact manometer -Manufacturer: Wika, Manometer Pressure gauge with contact device -Type: 233.50.100 Kont 821.1 16 bar -Screw connection: see photos -Dimensions: 160/130/H120 mm -Weight: 1.3 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, pressure gauge -Type: 0 to 250 bar -Screw connection: see photos -Number: 2x manometer available -Price per piece -Dimension: 100/85/H100 mm -Weight: 0.9 kg/pcs

Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: conveyor belt conveyor belt -Width: 600 mm -Length: 2290 mm -Thickness: 2 mm -Transport dimensions: Ø 100 x 600 mm -Weight: 2.6 kg

Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch orig -Type: SMTO-1_PS-S-LED-24C 151685 -Number: 2x switches available -Price per piece -Dimensions packaging: 150/110/H20 mm -Weight: 0.1 kg/pc.

Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch, original packaging -Type: SME-8F-DS-24V-K0.3-M8D 525 896 -Number: 20 switches available -Price: per piece -Packaging dimensions: Ø 100 x 10 mm -Weight: 0.1 kg/pc.

Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch orig -Type: SME-8M-DS-24V-K-0.3-M8D 706 755 -Number: 2x switches available -Price per piece -Dimensions packaging: Ø 100 x 10 mm -Weight: 0.1 kg/pc.

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Round table. with three-jaw chuck -Chuck size: Ø 210 mm -Spindle bore: Ø 64 mm -Center height: 150 mm -Dimension: 310/250/H260 mm -Weight: 47 kg

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary dividing table -Rotary table: Clamping surface: Ø 235 mm -Middle hole: Ø 25 mm -Groove width: 14 mm -Number: 2x round table available -Price per piece -Dimensions: 330/310/H110 mm -Weight: 28.8 kg

Slack adjuster, manual adjuster, slack adjuster, brake slack adjuster, brake adjuster -Slack adjuster: for brake system -Type: BXL 281966 -Toothing: 10 teeth Ø 38/31 mm -Number: 2 available -Price per piece -Dimensions: 215/100/H70 mm -Weight: 3.2 kg/pcs

Abrasive paper, emery paper, abrasive cloth, abrasive discs, abrasive bodies -Manufacturer: Tyrolit, grinding wheel 200x120x51.A170x80 unused original packaging -Type: SK-140499B.EOOB -Number: 3x grinding wheel available -Price per piece -Dimensions Ø 200 x 120 mm -Weight: 3.3 kg

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Manufacturer: Fibro stamping tool column frame -Type: 201.31.056. DIN 9822 C 100x80 -Die stamp: see photos -Dimensions: 340/160/H235 mm -Weight: 23 kg

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg

Power strip, portable power strip, solid rubber power strip, adapter, construction site power strip -Manufacturer: Gifas, solid rubber distributor adapter 32A / 16A -Type: 2800 Item No.: 282/301657M/303259/6 -Transport dimensions: 230/230/H130 mm -Weight: 3 kg

Transformer, current transformer, explosion-proof lamp -Manufacturer: Steel, voltage converter with transport frame -Type: 230 V 24 V see photo nameplate -Protection class: EEx de.IIC T4 -Accessories: incl. 24V lamp -Dimensions: 740/370/H1020 mm -Weight: 27 kg

Hydraulic pump, oil pump, gear pump -Manufacturer: Casappa, hydraulic pump -Type: PLP30.27DO-83E3-LGF/GE-N -Shaft: Ø 19 - 22 mm M14 x 1.5 - Connection: G3/4 , G1 -Dimensions: 175/125/H155 mm -Weight: 9kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Jungheinrich, chassis drive motor for pallet stacker type: ERC 205 -Motor: Type GF106-G3 24V 2.0 kW -Engine brake: Type IQ BFK458-10E -Wheel: 230 x 082 mm -Dimensions: 300/210/H650 mm -Weight: 64 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Jungheinrich, chassis drive motor for pedestrian stacker type: ERC 205 -Motor: Type GF106-G3 24V 2.0 kW -Motor brake: Type IQ BFK458-10E -Wheel: Type 1537 -Dimensions: 300/270/H650 mm -Weight: 65kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Jungheinrich, steering motor from pedestrian stacker type ERC 205 -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 140/130/H360 mm -Weight: 7.5 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Jungheinrich, steering motor from pedestrian stacker type ERC 205 -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 7.5 kg

Tiller head, pedestrian stacker, pedestrian pallet truck -Manufacturer: Jungheinrich, tiller head complete from pedestrian stacker type ERC 205 -Number: 2x tiller head available -Price per piece -Dimensions: 700/500/H180 mm -Weight: 10 kg/pc.

Control, control part, interface -Manufacturer: Jungheinrich, control from pedestrian stacker ERC 205 -Type: MP 1510C/6 -Mat no.: 50313640 -Voltage: 24V -Number: 1x control unit available -Price per piece -Dimensions: 245/190/H140 mm -Weight: 3.9 kg/pc.

Chassis, support wheel, swivel wheel -Manufacturer: Jungheinrich, chassis support wheel swivel wheel from pallet stacker type: ERC 205 -Wheel size: 140 x 54 Type GF106-G3 2.0 kW -Dimensions: 240/190/H280 mm -Weight: 16.6 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg

Support stand, assembly stand, steel stand, welding table, assembly table, work stand, screw stand -Support stand: Steel stand, height adjustable -Design: solid steel construction -Dimensions: 355/280H500 mm -Weight: 19 kg

Power supply, switching power supply, CNC control, E-STOP UNIT -Manufacturer: Fanuc, E-STOP UNIT CNC control emergency stop unit -Type: A05B-2400-C451 -Dimensions: 315/100/H180 mm -Weight: 5 kg

Cover for electric hand pallet trucks -Handover: in its current condition as inspected -Damage: see photos -Manufacturer: Linde Cover from electric hand pallet truck -Dimensions: Ø 300 x 200 mm -Weight: 1 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Logitrans, chassis drive motor from electric forklift SGL 2000V -Drive engine: CIMA 30351 24V 1.3 kW -Individual components: see photos -Dimensions: 290/235/H380 mm -Weight: 31 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering -Manufacturer: Logitrans, drawbar completely from pedestrian stacker SGL 2000V -Number: 1x drawbar available -Price per piece -Dimensions: 930/345/H110 mm -Weight: 12 kg/pc.

Tiller head, control panel, control unit, steering, steering unit -Manufacturer: Rapid, control panel steering completely from electric stacker RVT 2500 -Number: 1x drawbar available -Price per piece -Dimensions: 720/420/H180 mm -Weight: 14 kg/pc.

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Rapid, chassis drive motor faus electric stacker RVT 2500 -Drive motor::LS Leroy Somer type T15 24V 2.0 kW -Motor brake: Lenze -Individual components: see photos -Dimensions: 290/285/H700 mm -Weight: 76 kg

Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal controller, pedal switch -Manufacturer: SSUPOU, Foot switch type F1-U1 UN -Connector: 3-pin -Dimensions: 220/177/H141.5 mm -Weight: 2.5 kg

live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: WMW ABW Live center -Type: ZN 203 -Intake: MK3 -Number: 11x center point available -Price per piece -Total dimensions: Ø 54 x 167 mm -Weight: 0.9 kg/pc.

Hydraulic container, hydraulic tank, aluminum container for hydraulic pump, hydraulic unit -Hydraulic tank: tank capacity approx. 40 liters -Filter: RT-Filter RMS-80 -Filter capacity: 80 l/min -Level indicator: -Dimensions total: 490/250/H565 mm -Weight: 23 kg

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Spindle head: Spindle tool for table boring mills, plate boring mills, tilt adjustable -Stroke: 225 mm -Shaft: Ø 50 mm -Dimensions: 330/170/H415 mm -Weight: 48 kg

clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Surface: with grooves, without T-slots -Length: 3000 mm -Width: 2500 mm -Height: 300 mm -Transport dimensions: 3000/2500/H300 mm -Weight: 5220 kg

Heavy-duty castors, heavy-duty wheel, tire, forklift drive wheel -Manufacturer: Gumasol heavy duty roller heavy duty wheel -Wheel size: 250/80-170 -Number: 5x wheel available -Price per piece -Weight: 5.1 kg/pc.

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Manufacturer: Rübenach, clamping plate: with support ribs on a solid base -Length: 2500mm -Width: 1500mm -Height: 835mm -Dimension: 2500/1500/H835 mm -Weight: 2440 kg

Gauge block, gauge blocks, gauge block holders -Manufacturer: Koba, End gauge holder with quick adjustment -Type: 100-200 -Dimensions: 105/70/H325 mm -Weight: 1.3 kg