128,416 used machines on RESALE, but how to find them? Machine Search
Spiral kneader, Fabr. Boku, Type MK 240 Ak-CSDT
Spiral mixer, Fabr.Diosna, SP 240 AD
x-travel: 2050 mm y-travel: 1100 mm z-travel: 800 mm Control: FANUC 18iM Super CAP II total power requirement: 22/26 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 6,25 x3,3 x 3,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punch for clipping machine Poly-Clip 274305 A 15-30 br for FCA 100, 140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hello here we offer you a used semi-automatic metal band saw / band saw from MEBA Type : 230 GA-H Year of manufacture : ca 2007 Good condition, The machine was in a training workshop. The sale of this machine is only made to tradesmen or entrepreneurs. A visit is possible. Technical data are copied from the manufacturer, so without guarantee of 100% accuracy Automatic band saw Metal band saw Meba 230 GA-H with mitre cut. Automatic band saw Meba 230GA-NC Technical data: Manufacturer: Meba -Type:230GA-H -BJ. Approx. 2006-2007 (estimated) -with control (automatic) -with coolant pump -mitre cut possible -weight approx. 400kg -2 speed levels -high current -cutting range 230mm (see photo)
Used RO station by EPURO type RO 2000 PL. New 2017. Technical data: Medium - water, Nominal capacity Q [m3/h] - 2.0, SDI -
Cutting machine HSM type ABW-ROTA-2200 Specifications: • for foils, cork, veneer, etc. • Rotational cross-section • Cutting width max. (mm): 2100 • Heating: included • Cooling: included
Melag Euroklav 23V-S Autoclave The Melag Euroclave 23V-S is a high-performance Class S autoclave specially designed for steam sterilization of packaged instruments with simple hollow bodies in medical and podiatric practices. The device works with a simple pre-vacuum and effective vacuum drying to ensure reliable preparation. Vacuum System: The VS variant has a pre-vacuum and vacuum drying to ensure effective sterilization and drying of packaged instruments. Manufacturer. Melag Type: 32V-S Voltage: 230 V Power: 3000 W Boiler capacity: 22.6 l Operating temperature: 144 C Operating pressure:0.95..3 bar Loads: 1038 Year of construction. 2006 Weight: approx. 45 kg More items - new and used - can be found in our shop! International shipping costs on request!
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 273113 - Clipper M 07 / 30 mm , not coded for FCA 80 , 90, 100, 120, 140, 160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
MAJA ARTICLE NUMBER : 716-2690 PULL ROLLER FOR MAJA EVM3006 EF ,EVM 4006 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in the field of hematology to optimize reagent logistics in laboratories. The instrument is manufactured by RR Mechatronics and is often used in combination with Sysmex hematology analyzers. Purpose and function The RPU-2100R (Reagent Production Unit) is designed to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a stand-alone device whose components are all housed in a closed housing. The housing features removable, epoxy-coated sheet metal covers. All external connections as well as the ON/OFF switch are located on the back of the device. All components that can be serviced and replaced by the user are accessible through the front door. The ...
For sale is a BOXMAKER® cardboard machine from Horstmann Maschinenbau for the flexible production of tailor-made shipping boxes – exactly in the required size and quantity. Your advantages at a glance: • Producing cartons "just in time" – individually controllable via touch panel • Reduction of storage costs and filling material • Reduction of shipping costs through custom-fit packaging • Less transport damage, higher customer satisfaction • Processing of continuous cardboard or sheets, complex cuts possible Ideal for industry, wholesale, fulfillment and e-commerce that want to make packaging processes more economical, sustainable and independent.
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 273115 - Klipper M 07 / 30 mm c2, koddiert, für FCA 80 , 90, 100, 120, 140, 160 Request a Quote Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
Matrices for single and double clippers 12974 21691 48158 73526 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
LaserTec FullSet Monolith 265 industrial energy storage system was built by LaserTec S.A. in Poland in 2023. This highly advanced machine is a key component of a company’s strategic energy management. It allows the storage and management of electricity at the most cost-effective times, bringing tangible savings to the company. The system also plays an important role in stabilising and reducing overloads on the local network, which is particularly important in industrial plants where the continuity of production processes is critical to maintaining operational fluidity. The FullSet Monolith 265.50h energy storage system accumulates electricity from both photovoltaic installations and the grid. The battery modules made of NMC lithium-ion cells are characterised by timeless durability. Off-grid operation, on the other hand, provides emergency power in the event of power cuts. This solu ...
Clip guide plate 36br and deflector for clipping machine FCA 160 Poly Clip Item Number : Clip guide plate - 200623 Deflector - 162262 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
Multi-blade saw Paul type K 34 G 2200 Specifications: • Working width (mm): 2200 • Engine power (kW): 22 • Top rollers: with PU rings • Bottom rollers: corded • Saw shaft: included
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-A-SP-220 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-A-SP-260 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-A-SPH-220 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-A-SPH-260 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
; Engine: Cummins 6BT5.9-G1; Accessories: Tanker, Battery, Control Panel, Stahldach
(Exhibition model) - Material : DIN 1.4301, upper bottom and dome made of DIN 1.4404 - Surface, inside: III d, weld seams pickled and ground - Exterior surface : marbled - Capacity : approx. 2400L Dimensions : - Depth : approx. 1310 mm - Width : approx. 1080 mm - Cooling jacket height: approx. 1750 mm - Height of the shelves : approx. 450 mm - Total height : approx. 2570 mm Equipment : - 4 adjustable feet - Rectangular manhole 420x320 mm - Residual drain with disc valve NW40, Fredrich no 2 NW40 - Clarification drain with ball valve NW40, Fredrich no 2 NW40 - Stand display - Sampling - Thermometer, digital - Double jacket with piping pulled upwards - Labeling board - Ladder bracket - Dom NW 300 Vent Nozzle NW 50 - Crane straps
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-B-SP-220 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Make: oli Spezialanlagen Type: 210V/U Year of Make: 2021 Serial No.: 0020544 Height: 3.14 m Length: 8.77 m Width: 4.49 m Weight: approx. 3000 kg Infeed height: 950 mm +/- 50 mm Spout height: 950 mm +/- 50 mm Magazine capacity: approx. 1800 mm Control and accumulation distance on the infeed conveyor: 1.30 m Format-dependent output: max. 120 bottles/min. Case erector/sealer: Fabr.: oli Spezialanlagen Type: AV-T/U Year of Make: 2021 Core Ø: 76 mm Roller Ø: max. 450 mm Roll width: max. 50 mm The end-of-line packaging line consists of the following main assemblies: • Turning station • Shunting oli 210 V/U • Setting packaging machine olimat AV-T/U • Capper module Technical equipment • Control panel 12" • 3 colors signal traffic light • Jam protection • Driven side conveyor belts • Servo-motor transverse thrust • Servo-motor extension u ...
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-B-SP-260 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
IMAL GLADIATOR 255 CNC hydraulic press brake was built in 2003 in Italy by I.MA.L. GROUP. The machine is designed for precision machining of sheet metal with a maximum length of 4100 mm. The high press force of 255 tonnes, combined with an extremely stable design, guarantees the best bending results, even during the most intensive challenges. All this is complemented by an advanced DELEM numerical control with all the necessary functions. The IMAL GLADIATOR 255/41 CNC press brake weighs 20800 kg. Technical specifications of the IMAL GLADIATOR 255 press brake - CNC controller: DELEM DA 65 - maximum press force: 255 t (2550 kN) - maximum sheet metal length: 4100 mm - approach speed: 140 mm/s - bending speed: 10 mm/s - return speed: 140 mm/s - reach: 510 mm - slider stroke: 320 mm - maximum distance between work table and slider: 535 mm - work table width: 90 mm - distance bet ...
3 pieces Teflon knife for slicer TREIF type PUMA CE 700 EB Article number Treif : 244755 = 83581 - ID 16391, 12153,11695 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl
Simatic S7 1500 CPU, 6ES7 515-2AM01-0AB0, Siemens, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - We assume that the device has never been used, but cannot say for certain. Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for ...
Electric coupling for filling machine VEMAG type HK 23/4 -Kind. Item No.: 081-011-201 - 081011201 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
Boiler lifting tipper Kemper HK 200 for Kemper President boiler - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200 - with boiler drive and boiler peeling - for Kemper President Kessel
Complete production line for bevel gears, consisting of 6 bevel gear milling machines Klingelnberg BF 201 including orders for contract work for sale Technical data Diameter: 240 mm Module: 10 mm Tooth width: 60 mm Dimensions: 2.3 x 2 x 1.7 m Machine weight: approx. 6,700 kg Information and data are non-binding, subject to prior sale Special features: Complete production line consisting of 6 machines with the following accessories: - Bevel gear machine - 1x interchangeable gear set - 1x test block - Mounts (proportionate) - Knife set (proportionate) - Documentation (1xOriginal / data set) Furthermore, contract gear orders could follow, catalogue goods and special bevel gear sets according to customer specifications, complete volume approx. 8,000 components / year. Asking price of the seller 18.000.- VB / per machine
4 Used DESMI NSL125-215C/D02 Pumps with Danfoss EM-PMI Motors (2023) We are offering four (4) high‑performance used DESMI centrifugal pumps, model NSL125‑215C/D02, each fitted with a powerful Danfoss EM‑PMI electric motor. All units were manufactured in 2023, have seen limited operational hours, and are in excellent mechanical condition—ideal for marine, industrial, and high‑flow applications. Pump Specifications (DESMI NSL125-215C/D02) Flow rate: 250 m³/h Head: 49.63 mLC RPM: 2967 Impeller Ø: 219 mm Power: 55 kW Pump No.: 524965-01-03 Production year: 2023 Certified with CE and UKCA markings Motor Specifications (Danfoss EM-PMI300-T310 Series) Voltage: 500 V Power: 55 kW Speed: Up to 4000 rpm Torque: 177 Nm Cooling: IC 71 W IP Rating: IP65 Mounting: IM3001 Weight: 125 kg Manufactured: 2023 High‑efficiency permanent magnet motor technology Con ...
maximum number of results exceeded
please refine your search
