heidelberg 74 2 used for sale

Manufacturer: Hymmen, Type: AS 260, Year: 1973, Longitudinal cutting guillotine: yes, Double knife: no, Cutting lenght mm: 2.600, Motor-driven kinfe beam: yes, Year :1973

1. Combined Cycle 2. Manufacturer: Mitsubishi (Japan) 3. Commissioning year: 2007 4. Output: 248MW 5. Frequency: 50Hz 6. Pulverized Coal consumption: 1700 ton/day 7. Type: Gasification Furnace/Air Blowing Dry Feed System 8. Gas purification: Wet gas purification＋ Gypsum recovery 9. Gas Turbine １200℃ class 10. Total Running hours: approx. 32,000 hours 11. Design Thermal Efficiency: 12. Power Generation End４8(46)％ / Transmission End ４2(40.5)％ 13. (Thermal efficiency is based on high-level heat (HHV), 14. Low heat (LHV) standard in parentheses) • • -Gasification Furnace • -Pulverized coal Machine • -Heat Exchanger • -Gas purifier • -Booster • -Gas Turbine • -Steam Turbine • -Generator • -HRSG (Heat Recovery Steam Generator) -Transformer

Manufacturer: Howial, Type: MGZ 238, Year: 1980, Control: hand, Work piece width min-max mm: 30-120, Min.-max. workpiece length in mm: 400-3000, Min.-max. workpiece height in mm: 12-60, Longitudinal feeding: yes, Stack height in mm: ca.600 mm, Feeding speed max m/min: 40, Pushing device with catch: yes, Year :1980

Manufacturer: Wandres, Type: CH 29/1100/2750, Year: 2002, Dust removal brush: yes, Number of units: 2, kW Leistung Motoren: ca 2, Units mounted upright: yes, Working width mm: 2.750, Year :2002

Siemens SIMATIC MP 277 10" Touch Panel HMI The Siemens SIMATIC MP 277 10" is a high-quality industrial HMI operator panel designed for demanding automation applications. It features a large 10-inch color touchscreen, providing clear visualization and intuitive control of machines and production processes. This panel is part of Siemens' SIMATIC HMI series and is widely used in industrial environments for monitoring, control, and data visualization. It supports multiple communication interfaces, making it compatible with a wide range of Siemens PLCs and automation systems. Key Features: 10" color TFT touchscreen display User-friendly interface for machine operation and monitoring High performance and reliable operation in industrial environments Supports MPI / PROFIBUS / Industrial Ethernet communication (depending on version) Configurable with Siemens WinCC Flexible / TIA Po ...

Manufacturer: IMA, Type: Quadroform C 80/280, Year: 1995, Working range X: 2800, Working range Y-axis: 800, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 7,5, rpm 1): 1500-18000, Number of tool changers: 8, Pickup Wechlser: yes, Vertical drills-X: 5, Drill vertical Y: 9, Number of tables: 1, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 80, Saw unit: Wechlser, FREE TEXT: inkl Werkzeuge, Year :1995

Key data: 500 mm, 200 mm, 77 mm

Binder 500x200 Complete System Electric 220V Magnet Clamping Plate Milling Grinding Total weight approx. 50 to 60 kg. Good used condition, full function. Includes switch and control cabinet. The connection on the control box can be connected directly to 220 volt luminous flux and can therefore also be used universally on the milling machine. The actual magnet has 110 volts. Very long power cord, about 7-8 meters. The rotary switch only works to the right. That is how it should be. Always switches every 180 degrees every function. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.

Manufacturer: CEFLA, Type: TB 2000, Year: 2015, Control: yes, Working length mm: 2000, Working widht mm: 1300, Total hight mm: 900, Total hight mm: 900, Engine power kW: 0,8, Feeding speed min-max m/min: 20, Required space L x W x H mm: 2000x1300x900, Weight approx. kg: ca. 300, Year :2015

Hersteller : Siemens, Type: CPS 256, Control: PC 612, Serial number: B 1200-C963, Axis card: X7181, Plug-in card: C.N.I, Card number: 7187.20,

; Gross weight [kg]: 803; Engine: Perkins 404D-22TG; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : 32A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

Case Maker Co-pilot system with touch screen for automatic size setting, menu guided make-ready and fault indication. Twin board pre-loading conveyors Twin board magazine feeders Central soft spine feeder with double reel holder for auto-splice and cutter for waste Magazine feeder of pre-cut cloth with miss control Mobile hot-melt gluing unit Heated glue application roller with scraper roller Cloth cylinder with grippers & exchangeable plates for rubber pad Counter shingle delivery with roller conveyor External glue application adjustment Glue viscosity device for automatic water supply control Pressing roller for crease-free cover to board application Single case request for operator set-up Variable DC drive Automatic lubrication Including accessories & manuals.

Manufacturer: Mattei Schraubenkompressor, Type: ERC 200 AP 200 H 4, Screw compressor: yes, Final sealing pressure bar 1: 9, Driving power kW 1: 37, Volume flow rate m³/h: ca.5, Compressed air min/max bar: 9, Dimensions mm: 2000 X 1000 X 1400, Available: sofort, Preis zzgl. Mwst: 1750,

Manufacturer: Bauknecht, Type: 0W8/220, Serial number: 904417, Serial number: 738255, mH/Hz: 100, Power Input: 220 V, Imax= Ampere: 8 A,

2K52-1 radial drilling machine was built in the 80s in the USSR. The offered machine is perfect for both unit and small batch production. It is capable of performing operations such as drilling, reaming, countersinking and threading in workpieces of various sizes. All these machining processes are performed by means of a reliable, tiltable spindle with an optimised speed range. This solution enables the machining of workpieces at different angles, without the need for repositioning them. The work head with spindle moves along the arm, enabling precise setting of the drilling point. The arm, in turn, moves vertically and horizontally along the rotating column, providing great flexibility during operation. The machine column rotates around its own axis, allowing the arm to be repositioned relative to the base. The 2K52 radial drilling machine is also equipped with, among others, a work tab ...

Manufacturer: Ligmatech, Type: MTB 200/25/08, Year: 2011, Control: no, Working length mm: 2000, Working widht mm: 800, Total hight mm: ca.600, Belt width: 800, Total hight mm: ca.600, Engine power kW: 0,75, Feeding speed min-max m/min: 5-20, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Movable: no, Year :2011

Manufacturer: Bauknecht ATB, Type: 0V16/220, Model: 904431, Serial number: 738256, mH/Hz: 100 Hz, Output DC Volt: 3 x 220 V, Imax= Ampere: 16 A,

Manufacturer: Limatech, Type: MTB 200/15/08 , Year: 2011, Control: no, Working length mm: 1500, Total hight mm: ca.650 mm, Total hight mm: ca.650 mm, Total power kW: 0,5, Feeding speed min-max m/min: 5-20, Feeding speed continous adjustable: yes, Year :2011

Manufacturer: Commander SE Frequenzumrichter, Type: SE 23400150 SE 2.5 T, Serial number: 3781484007, FREE TEXT: kw 1,5, Free text 1: 50-60 Hz, Free text 2: Ampere 6,4-4,2,

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve -Manufacturer: Bosch, Directional control valve -Type: 0 810 091 288 -Pmax: 315 bar -Quantity: 1x valve available -Dimensions: 215/46/H75 mm -Weight: 1.9 kg

LIKON 200C Horizontal Baler Machine Technical specifications: Engine power - 22 kW Year of production - 1994 With oil cooler Horizontal binding x 4 times Press force - 30 t Overall dimensions of the baler: 10000 x 2000 x 2750 mm Press weight: 10 t Loading opening dimensions: 1400 x 700 mm Bundle dimensions - 700 x 1100 x 1000-1200 mm, variable length With hydraulic oil No binding wire It worked in a printing shop without a conveyor belt, only with dry-shredded printing waste! Motorcycle hours - 62639 The baler is in good condition, ready for operation PRICE ON REQUEST! ----- Horizontal Baller Paal LIKON 200C Technische Daten: Motorleistung - 22 kW Produktionsjahr - 1994. Mit Ölkühler Horizontale Bindung x 4 Mal Presskraft - 30 t Gesamtabmessungen der Presse: 10000x2000x2750 mm Eigengewicht der ...

Manufacturer: Ott, Type: F 2530, Year: 2008, Min-max edge material mm: 0,2-25, Work piece width min-max mm: min. 65, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 10-16, Premilling: yes, Mitre stations: yes, 2 motors: yes, Type of scraper: Profil und flatch, Flat scraper: yes, Year :2008

Manufacturer: Commander SE Frquenzumrichter, Type: SE 23400150, Model: SE 2,5 T, Serial number: 3781643022, Hz: 0-1000, FREE TEXT: kw 1,5, Free text 1: Ampere 6,4-4,2,

Manufacturer: Gottschild, Type: BSD 2000, Year: 2004, Control: Siemens, Monting of the machine: 5 Tellerbürsten, Number of units: 5, Working widht mm: 650, Through running hight max mm: 40, Diameter of brushes: ca.300, Cross-brushing unit: yes, Fast exchange device: yes, Through running hight max mm: 40, kW output motor: ca.1,5, Vacuum belt: yes, Feeding speed continous adjustable: yes, Year :2004

Manufacturer: Telemecanique Schneider Steuerung, Type: TSX DMF 242A, Freitext 14: mit Spannungsversorgungsteil 24 Volt,

Manufacturer: WP-ARO, Type: 666120/240/C, Year: Membranenpumpe, Control: B1050623, Year :Membranenpumpe

Manufacturer: Sergiani, Type: LAS 230, Year: 1999, Stages: 10, Heizplattenmasse ca.mm: 2500x1300, Anzahl der Etagen: 10, Heated by: Warmwasser, Press length mm: 2500, Pressing width mm: 1300, Press power kg /cm²: 7,69, Electrically heated kW: 21, Work piece thickness max mm: 80, Year :1999

Manufacturer: FIDI Destlliergerät, Type: RS 250 AX, Year: 2016, FREETEXT1: Füllkapazität 20-30 Liter, FREETEXT2: Kesselvolumen 40 Liter, FREETEXT3: Lösungsmittel 4-5 Stunden, FREETEXT4: Spülwasser ca.12 Stunden, FREETEXT5: Abkühldauer 3-7 Stunden, FREETEXT6: Betriebtemperatur 50-200 Grad, FREETEXT7: Kw Leistung ca 2,1, Year :2016

Manufacturer: Cefla, Type: TR 2500, Year: 1999, Working widht mm: 1350, Drive power kW: 0,26, Year :1999

Manufacturer: Cefla, Type: TN 2500, Year: 1999, Working widht mm: 1350, Drive power kW: 0,26, Year :1999

Manufacturer: Haffner, Type: DGS 202E 6000, Program control: yes, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnittlänge min-max mm: 400-6000, Power saw engine kW: 2,2, Width adjustment by engine: yes, Saw blade diameter max mm: ca.500, rotations controlled: 2850,

Manufacturer: Cefla, Type: TR 2500, Year: 1999, Length mm: 2500, Working widht mm: 1400, Drive power kW: 0,26, Year :1999

Manufacturer: Viet, Type: Valeria Challenge 223 TM, Year: 2000, Monting of the machine: Längs/Längs, Sanding width mm: 1350, Sanding hight mm: 3-160, Continous adjustable feeding speed m/min: 6-20, Vacuum table: yes, Weight in kg: 3450, Year :2000

Manufacturer: Bürstenschleifmaschine, Type: 250 mm, Number of units: 2, Working widht mm: 250 , Diameter of brushes: 280, Units mounted upright: yes, Fast exchange device: yes, kW output motor: 1,5,

Manufacturer: Hackemack, Type: KTR 2040, Year: 1995, Work piece width min-max mm: 1350, Number of lamps: 3, Lampen gerade eingebaut: 3, Power per lamp watt UV: 80, Electrical power consumption kW: ca 47, Year :1995

Manufacturer: Hackemack, Type: KTR 2040, Year: 1995, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3 - 80, Number of lamps: 1, kW power 1 lamp: 15,6, kW power all lamps: 17.15, Lampen gerade eingebaut: yes, Lampen von unten: no, Year :1995

Manufacturer: Becker, Type: SV.5,250/1, revolutions rpm: 2800, Final sealing pressure mbar: 190/200, Drive power kW: ca.3,

Manufacturer: Hubwagen, Type: 2000 kg, Year: 1989, Fork length in mm: 1150, Width mm: 540, Year :1989

Manufacturer: Rietschle, Type: G-BH1 2BH1900-7AH17, Engine power kW: 12,5, rotations rpm: 2950, Direkt drive: yes, Pressing: 280 mbar, Suction side mm: ca.100, Outlet side mm: ca. 100,