heidelberg 74 2 used for sale

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 220V 800W -Length: 140 mm -Diameter: 13 mm -Price: per piece -Quantity: 12 available -Weight: 0.2 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 0.75 kW -Input: 1 x 200 - 240 V - 50/60 Hz -Output: 1.8 kVA -Number: 2x converters available Price: per piece -Weight: 3 kg

New shrink foil packaging machine Brand: Erregi Type: EASY 250 This plant consists of the wrapping machine and the shrink tunnel. The wrapping machine is formed of a suitably reinforced steel chassis, an infeed and an outfeed conveyor belt. In machine chassis there are the following components: - The driven upper roller - The system for unrolling the lower roller, consisting of a driven roller and a pneumatic assisted idle roller. - The system for welding and cutting the upper and lower PE sheets consisting of a special alu profile, with temperature controll and changable steel blade for carry out the cold cut. - The infeed and outfeed transport belt is likewise made up of reinforced steel chassis on which a closed link belt is mounted. The shrink tunnel consists of two chassises. - One holding the heated part and one supporting the former. - This system wi ...

BUCHER QX61-200/62-080/63-080 R447-6-D Q18301417 Pd: 125 / 210 / 320 bar Vg: 200 / 080 / 080 cm3/U Nr: 100036553

Offset printing press Job card for Manroland offset presses, used. Can ship worldwide.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 90 mm -Piston rod: Ø 50 mm -Stroke: 260 mm - universally applicable: can be used -Dimensions: 660/180/H100 mm -Weight: 28 kg

Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg

Safety switch, TZ -Type: AZM 415-22zpk -24 VDC -Protection class: IP 67 -Quantity: 5 available Price: per piece -Weight per package: 1 kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 231 004 -Price: per piece -Quantity: 1x Available -Weight: 0.3 kg

Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton

Transnorm conveyor belt GF 2200-600-500 RA2388 Technical data: Make: Transnorm Conveyor length (NL): 2200 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): 0,3-1,2 Drive: SEW geared motor, with Movi-Mot Frequency inverter for stepless speed change Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Movi-Mot KW: 0,37/S1 Conveyor speed m / s: 0,3-1,2 scope of delivery ...

Transnorm conveyor belt GF 2250-600-500 RA2389 Technical data: Make: Transnorm Conveyor length (NL): 2250 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): 0,15-0,80 Drive: SEW geared motor, with Movi-Mot Frequency inverter for stepless speed change Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Movi-Mot KW: 0,37/S1 Conveyor speed m / s: 0,15-0,80 scope of deli ...

Section bending tools included: tubedia 50 mm amp; 80 mm Number of rolls: 3 rolls Roll capacity cold: 2550 x 15 mm Profile bending machine: yes Pre-bending : yes

Geared motor, electric motor, three-phase motor -Speed: 36/144 rpm -Power: 2.2/5.5 kW -Type: RF83WD132ML-8-2BS/HL/TF -Brake -Design: B5 -Shaft diameter: Ø 50 mm -Protection class: IP 44 -Weight: 135 kg

Specifications: - Max. working width 2020 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment pre-selectable 0 - 135 ° - Upper bolster clamping via eccentric lever + foot pedal - Largest opening width / stroke of the upper beam 100 mm - Height adjustability of the lower beam 25 mm - Space requirement approx. W 2950 x H 1200 x D 800 mm - Weight approx. 1450 kg

5/3-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 235 101 Price: per piece Quantity: 3 available -Weight: 0.3 kg

5/3-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 221 012 -Price: per piece -Quantity: 2 available -Weight: 0.5 kg/piece

Nozzles, injectors, diesel engine nozzles -Type: 214 5079 Quantity: 10 pieces available Price: per piece -Weight: 0.4 kg

Type 210 standard 13 Shear: 13 mm Flat steel: 150 x 16 mm Punching:nbsp; example: dia 25 in 16 mm Stroke: 27 mm 50 ton Notching: 12 mm L/T steel: 80 x 10 mm U steel: 140 mm I steel: 160 mm round bar steel: 42 mm square bar steel: 38 mm L-profile 90°: 110 x 10 mm L-profile 45°: 90 x 9 mm Punching pressure: 50 ton Power needed: 3 kW Length: 1270 mm Depth: 800 mm Height: 2180 mm Weight: 2 ton

Mast rollers, forklift mast, ball bearings -Quantity: 3 pieces available -Price: per piece -Weight: 2 kg

Temperature controller, temperature sensor, temperature setting -Type: 237.0120-035 Price: per piece -Number: 28 available -Weight: 0.5 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 150/25 mm Price: per piece -Quantity: 1 available -Weight: 1 kg

end mill, end mill, milling cutter -Outer diameter: 200/H60 mm -Teeth: 12 -Quantity: 1 available Price: per piece -Weight: 9 kg

turning diameter: 290 mm turning length: 204 mm control: Fanuc 31i - Model B Number of working hours: 5149 + 4185 h number of spindles: 2 Stück spindle turning speed range: max. 3200 U/min x-travel: 230 mm z-travel: 250 mm distance between the spindle noses: 450 mm spindle nose: A 2 - 6 spindle bore: 73 mm tool turret with 10 work positions: 2 x workpiece feeding device: workpiece magazin: 14 Stück max. workpiece diameter: 200 mm workpiece weight max.: 2 x 8 kg workpiece length - max.: 120 mm rapid traverse: 24 m/min feed - longitudinal/cross: 0 - 1260 mm/min spindle motor: 11/15 kW Driven tools: 3,7/5,5 kW turning speed of the driven tools: 4000 U/min. total power requirement: 61 kVA weight of the machine ca.: 6,3 t dimensions of the machine ca.: 3,1 x 2,9 x 3,6 mm CE signed: Condition: Not more under power: Electric 400 Volt: Power clamp.chuck: Howa Chip conveyor: Cooling equipm ...

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -without: interchangeable jaws -Mouth size: Ø 225 mm -Cone: Ø 106 mm -Weight: 28 kg

Diaphragm valve DN40, plastic diaphragm valve 2/2 way -Type: 677 25D 0 1142 -Max. pressure: 6 bar -Weight: 1.6 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 220 mm -Number: 2 milling cutters Price: complete -Weight: 14 kg

End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 16 mm -Usable length: 20 mm -Type: HSSE -Quantity: 17 pieces -Sale: only complete set -Weight: 4 kg

Machine vice, vise -Jaw width: 250 mm -Jaw height: approx. 80 mm -Clamping depth: max. 310 mm -Weight: 120 kg

Manual turning head Hydraulic clamping Longitudinal travel X-axe: 2000 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 2200 x 800 mm Power on spindle: 18,5 kWt Admission in millinghead (ISO): ISO 50 Max speedrange: 1500 rpm Control: Heidenhain Weight: 14000 kg

Knapp roller conveyor 2200-350-280 RA2326 Make: Knapp Roller width (RB): 280 mm Nominal/outer width (NB): 350 mm Length: 2200 mm, Additional extension segments available Roller diameter: 50 mm Roller distance: 110 mm Motor Roller conveyors: Leroy Somer Electrical Data 380V, 0,37kW Height frame: 76 mm, 276 with Motor Please note that the extension element is not driven without the drive station! Optionally available: Additional segments to extend length frequency converter for stepples speed control Supports Side guide one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Electric data: 0,37 kW condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 350 Roll width in mm: 280 Roll division in mm: 110 Driven: YES, NO scope of delivery: without supports and side guides For individual, expert advi ...

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) -Inner diameter: 40 mm -Speed: max. 4000 rpm -Weight: 12 kg

Turning tool with indexable cutting jaws, tool holder, turning tool, indexable insert holder, turning tool, indexable insert steel -Dimensions: 150/25 mm -Price: per piece -Number: 2x available -with: 20x Widia plates each -Weight: 1 kg

1 gebr. Boiler --------------------------- Make : LOOS; Gunzenhausen Type : U-HD Heating surface approx. : 31 m² Power max. : 2.000 kg/h most permissible. Operating overpressure : 10 bar Increased test pressure : 18 bar Water content at NW approx. : 1.740 l Water content full approx. : 2.480 l Year of construction : 1999 equipped with Weishaupt gas burner, gas control system, Control cabinet, feed water pump, water level sight glass, steam and safety valve and the existing coarse and fine fittings

Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5500x1400x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L, built 2026 --------------------------------- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beam ...

Programmable rotary encoder, GEL 2444KM1G5K030, Lenord & Bauer, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

1 gebr. Boiler ---------------------------------- - mounted on frames - Manufacturer : Jumey Heating surface approx. Taxi: 40 m² Capacity : 2,000 kg/h Operating overpressure max. : 10.0 bar Previously operated with : 5.0 bar Water capacity at NW approx. : 3,540 l Water content full approx. : 4.750 l Year of construction : 1994 equipped with Weishaupt gas burner, gas control system, Control cabinet, feed water pump, and the existing coarse and fine fittings.

Screw pump, GR70-SMT16B-600L-AC-28B5G, Settima, used-function assurance Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - Screw pump, Settima GR70-SMT16B-600L-AC-28B5G, Original price approx. € 4,100, Sales price € 1.800. - Motor, 7.5 kW, 400 V, AC Motoren GmbH - Includes SAE rubber compensator from 2 1/2" to 3 1/2", stainless steel - Includes stainless steel SAE 2 1/2" connecting pipe Please note: We also sell the complete oil/water cooling system. If you are interested, please request the operating instructions or we would be happy to invite you for a viewing. Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time o ...

Skid with a triagi reactor manufactured by ATTP in stainless steel, model MTA-250, with agitation and a volume of 250 liters, and 2 lung tanks with agitation. The reactor engine has a power of 7.5 kW, and the tank engines 1.5 kW. Volume Total capacity 250 L Material 316/316L stainless steel Jacket or half-coil material To be determined Stainless steel Technical features Model MTA-250 Year of manufacture 2018 Equipment configuration Agitator Transport information Length 5000 mm Width 2300 mm Height 2820 mm Condition That's how it is Made by Unknown

Wet grinding stone, column grinder, column grinder -Wet and dry sander -Grinding wheels: 220 x 40 mm -Motor: 0.55 kW -Speed: 600 rpm -Dimensions: 650/300/H1200 mm -Weight: 80 kg

Stainless steel mill, manufactured by STEPHAN, model MICROCUT MCH 20k. Year 1998. Capacity 1200 L. Motor power: 15 kw at 2925 rpm 50 Hz 400 V. Hopper dimensions: Upper bottom: inner width 470 mm, inner length 540 mm. Lower bottom: inner width 170 mm, inner length 300 mm Material Stainless steel Technical features Model MICROCUT MCH 20K Year of manufacture 1998 Transport information Length 1400 mm Width 700 mm Height 1550 mm Weight 1200 Kg Made by Stephan

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 40 mm -Number: 7x discs available -Price: per piece -Weight: 1.9 kg

Cutting device, pneumatic press, punch -Type: 290 908 -Max. pressure: 8 bar -Dimensions: 300/340/H270 mm -Weight: 25 kg

0: . V 0: . Hz 0: . kW The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: MIG/MAG welding machine Make Merkle Type ME 202 LK Connection voltage 3 x 400 volts Adjustment range 30 – 200 amps Duty cycle 20% ED at 200 amps 60% ED at 120 amps Current setting 7 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 10 Ampere Dimensions L x W x H 780 x 360 x 590 mm Weight 62 kg Special accessories for point and interval equipment 2/4-stroke gearshift Age approx. 30 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire 0.8 mm Ø, D 300, 5kg 1 can of non-stick spray 1 piece spare parts box complete Equipped 1 Piece Instructi ...

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 250 mm -Groove: 20 mm -Height: 108 mm -Dimensions: 580/350/H120 mm -Weight: 36 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 3x201/1x190 mm -Cone: 82 mm -Hole circle: Ø 105 mm -Number: 2x discs still available -Price: complete -Weight: 11 kg

Granulator - Wanner C17.26sv / Like new Year of construction: 12/2020 Description: Slow-moving granulator with gearbox Power: 3 kW 2 stator blades, 12 rotor blades, the sieve - interchangeable Hopper inlet: 280x250 mm Grinding chamber opening: 240x170 mm It is very easy to clean the grinder, which is especially recommended if the color of the ground fabric is changed often All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Manufacturer: Hackemack, Type: 2540, Year: 1995, Working widht mm: 1300, Working height in mm: 950, Conveyor lenght mm: 11000, Through running hight mm: 90, Thermal output: 2 Register, Feedin speed m/min: 5-20, Belt conveyor: yes, Flat spray nozzle: yes, Round nozzle: Flachdüse, Damper register - items: 2, 1st Damper register kW: 65, 2nd Damper register kW: ca.50, Year :1995

Manufacturer: Joos, Type: S4R/P 2200 FB, Year: 2018, 4 roller machine: yes, Work piece width min-max mm: 2200, Year :2018