heidelberg 2 color used for sale

arm length: 5500 mm weight max. in kg: 250 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.30 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated

Bezel, stick, lynette -Max. Passage: Ø 240 mm -Tip height: 380 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 700/160/H830 mm -Weight: 120 kg

arm length: 5500 mm weight max. in kg: 250 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.23 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dionex ICS 2000 Ion Chromatograph

Open Spray Stand 2x2,1x2,2 The overspray during powdering is absorbed by the extraction unit. The powder spray stand is delivered on rollers and is therefore mobile. - The extraction system is equipped with a 60 L powder container (rollable). - As a 1st stage, there are 4 filters in the extractor. - Above the cab is the absolute filter. 1. Dimensions of the powder stand width 2,000 mm Depth 2,100 mm Height 2,200 mm 2. Fan 1 pc. 6,000 m³/h Electric motor 3.0 kW 3. Filter Φ 325x600 4 pcs Type Filter Cartridges 4. Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5. Absolute filter 1 pc. type bag filter

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band Width:20mm

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Number: 1x prism -Price: complete -Dimensions: 210/85/H226 mm -Weight: 14 kg

Powder curing furnace 2,000 x 1,900 x 2,000 mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m³/h 10 electric motors 1 pc 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 33 kW 12 hinged doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc oven is electrically operated 15 Exhaust air 1 pc device for exhaust air pipe, manual flap guide

Powder curing furnace 2,000 x 1,900 x 2,000 mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m³/h 10 electric motors 1 pc 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 33 kW = 28,380 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is operated with gas burner 15 Exhaust air 1 pc device for exhaust air pipe, manual flap ...

Spiral bookbinding machine Swigraph R6 257U, with various tools in Swiss quality, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machines in our house by prior appointment.

Stop, depth stop, length stop for miter saw, pull saw... -Receiver: Bosch profile -Length Unit of measurement: 2000 mm -Price: complete -Dimensions: 2215/100/H1000 mm -Weight: 10 kg

Gear motor, electric motor, electric gear motor -Speed: 24/48 rpm -Power: 0.15/0.2 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 335/170/H180 mm -Weight: 12.1 kg

Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 8.000 kg/h Electric power: 66 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 235 Length: 200 Height: 185

• This workstation was configured for a cleanroom class D and max. for OEB3 substances (medium toxic material) • Via the laminator in the bonnet area, H 14 filtered clean air in ISO 5 quality in accordance with EN 14644-1 with unidirectional flow and a flow velocity of 0.17 m/s to 1.00 m/s - depending on the product and task - is channelled into the interior of the barrier above the product, creating a cleanroom zone. • The visible surfaces are made of stainless steel 1.4301 and are brushed (RA

Type: SC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Frequency speed regulation 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in set Machine dimensions in cm: Width: 220 Depth: 200 Height: 182 Electric power: 57 kW Voltage: 400 V, 50 Hz

geared motor, electric motor -Speed: 40.5 rpm -Power: 0.55 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Dimensions: 445/230/H210 mm -Weight: 26 kg

All stainless steel Hopper capacity: 2500 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 25 KW Installation dimensions of machines in cm: Width: 215 Length: 235 Height: 225

weight max. in kg: 600 kg fork length: 1150 mm stroke height: 2700 mm total power requirement: ? kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

geared motor, electric motor -Speed: 61/122 rpm -Power: 0.11/0.15 kW -Design: B3 -Shaft diameter: Ø 16 mm -Protection class: IP 54 -Number: 1x geared motor available -Dimensions: 330/130/H190 mm -Weight: 10.1 kg

All stainless steel Hopper capacity: 2000 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 18 KW Installation dimensions of machines in cm: Width: 193 Length: 227 Height: 215

surface area: 440 x 1000 mm no. of flutes: 5 groove width: 16 mm total power requirement: - kW weight of the machine ca.: 210 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STANKO 2N636GF1 Horizontal boring mill MITSUBISHI controler, new 2013 Spindle 125 mm Table 1600 x 1800 mm Max. horizontal (axial) movement of the spindle (Z') - 1000 mm Max. vertical movement of the headstock (Y)- 1400 mm Max. longitudinal movement of table (Z, W) - 1600 mm Max. lateral movement of table (X) - 1400 mm The largest mass of the processed product - 8 tons Spindle speed - 8 ... 1250 rpm Spindle Drive Electric Motor - 20 kW The weight of the machine is full - 34.6 tons

Gear motor, electric motor, three-phase motor -Speed: 19.5/78 rpm -Power: 0.1/0.4 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 410/220/H210 mm -Weight: 21.9 kg

Geared motor, electric motor, electric geared motor -Speed: 45/90 rpm -Power: 0.45/0.6 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 33 Quantity: 1 piece available -Dimensions: 415/200/210 mm -Weight: 20.3 kg

Gear motor, electric motor -Speed: 45/90 rpm -Power: 0.55/1.05 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 440/220/H220 mm -Weight: 25 kg

geared motor, electric motor -Speed: 133 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 44 -Dimensions: 370/200/H185 mm -Weight: 13.4 kg

power capacity: - kW tool adaptor: KOMET PKB 200-20-112 total power requirement: - kW weight of the machine ca.: 700 kg dimensions of the machine ca.: 1,6 0,7 1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor -Speed: 20.5 rpm -Power: 0.37kw -Type: B5 -Diameter shaft: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price per piece -Dimensions: 500/230/H220 mm -Weight: 31kg

Gear motor, electric motor, electric gear motor -Speed: 23/100 rpm -Power: 0.15/0.6 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 560/230/H200 mm -Weight: 30 kg

Gear motor, electric motor -Speed: 65 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 1x geared motors available -Price: per piece -Weight: 31 kg

inner taper of milling spindel: SK 40 collet diameter: 0,5-25 turning speed range: 1900 - 6000 U/min drive motor: 0,55 kW total power requirement: 0,55 kW weight of the machine ca.: 50 kg dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor -Speed: 31.5/63 rpm -Power: 0.25/0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44/55 -Price: per piece -Number: 2x available -Dimensions: 405/190/H160 mm -Weight: 17 kg

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Hand lever shears -Material thickness: max. 2 mm -Blade length: 200 mm -Dimensions: 790/540/H1715 mm -Weight: 28 kg

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, inclined conveyor -Body: made of stainless steel -Speed: 30 m/min -Motor power: 0.37 kW/59 rpm -Belt width: 390 mm -Length: 2050 mm -with driver: 325 x 150 mm -Transport dimensions: 2100/800/H570 mm -Weight: 160 kg

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

Gear motor, electric motor, electric gear motor -Speed: 33 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter shaft: 20 mm -Protection class: IP 54 -Brake: 24 volts -Dimensions: 380/200/H145 mm -Weight: 17 kg

2 x KSB Pump ETANORM G 150-250 G10 Motor 1LG4183-4AA60 SN 02 – used - : Price per piece from location: 5.750.-€ (net) Manufacturer: KSB Type: ETANORM G 150-250 G10 Serial number: 9971143054 000100 02 and 03 Year of Make: 2007 Q400.00m3/h H 14,00m N 1460 1/min Condition: good Available: immediately Location: Frankenberg camp / Saxony

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing with the pictures -Total length: 200 mm -Total height: 188 mm -Weight: 6 kg

Gear motor, electric motor -Speed: 30.5 rpm -Power: 0.55 kW -Brake: 440 V -Construction: B5 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 605/250/H215 mm -Weight: 36 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -divided -Tool: 60° -Dimensions: 203 x 45 mm -Total length: 1800 mm -Lengths: 900/900 mm -Weight: 82 kg

ID3411 Crane Repair Spreader for 20ft Container year/Baujahr 2016 - brand new, unused 1.5 t Spreader to move sea container 20Ft, SWL: 40.000 Kg, is completely new never used Move spreader to sea container 20Ft, SWL: 40,000 Kg, is completely new never used

Key data: 22 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...

Gear motor, electric motor -Speed: 68 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 400/180/H200 mm -Weight: 21 kg

Exterior mirror, exterior mirror -Number: 2x exterior mirrors, right and left -Price: complete -Manufacturer: VW -No.: 2D1 857 502A 01C -Weight: 3.6 kg

friction wheel, running wheel, bridge crane, hall crane, assembly crane, workplace crane -Friction wheel travel drive for: Demag crane -Wheel diameter: 270 mm -Wheel width: 90 mm -Quantity: 2 pieces available -Price: per piece -Dimensions: 390/120/H290 mm -Weight: 38 kg/piece

Frequency converters, frequency converters, converters for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Power: 2.8 kW -Output: 42 V -Frequency: 200 Hz -Dimensions: 1160/600/H720 mm -Weight: 74 kg

Sr. No.: 111000253 // p/n: 1364000