heidelberg 2 color used for sale

Safety control, safety door switch, safety switch, safety sensor, magnetic switch -Type: 161 271 AC -Protection class: IP 67 -Number: 18 available -Price: per piece -Dimensions: 75/40/H55 mm -Weight: 0.2 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 220 mm -Taper cone: Ø mm -Mounting hole circle: mm -Through hole: 50 mm -Exchangeable jaws: -Weight: 25 kg

Clamping table, clamping angle, T-slot table, rotary table, circular grinding unit, milling machine table -Attachment for a: TOS universal grinding machine -Table surface: 490 x 190 mm -T slots: 2 -Clamping table: rotatable, swiveling, movable -Dimensions: 490/190/H290 mm -Weight: 31 kg

Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 800 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with function pass-through flap -> straps stop as soon as the flap is lifted. Equipped with its own drive and controls. Fixed transport speed, no frequency converter installed. Machine runs flawlessly. New conveyor belts were installed.

Bezel, stick, lynette -Transfer in current condition as seen -Max. Passage: Ø 260 mm -Tip height: 370 mm -without: quills -Technical drawing: in the photos -Dimensions: 680/135/H830 mm -Weight: 92 kg

Bezel, stick, lynette -Max. Passage: Ø 212 mm -Tip height: 319 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 610/120/H650 mm -Weight: 59 kg

Anlaser for MWM 234 Motor: - 24V - 5.4kW - 9 teeth Bosch Number: 0001416024 / 0 001 416 024

MACC Metal Circular Saw K 225 Cutting capacity round up to 65 mm Saw blade 225 mm Vise opening 75 mm Speed 52 rpm Motor 0.75 kW, 230 V Weight approx. 32 kg

Key data: 220 mm

MACC Metal Band Saw Special 280 CSO Section cap. up to 220 mm round Speeds 32/66 m/min. Coolant pump Attack Motor 2-stage 400 V incl. machine base Weight approx. 230 kg

Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements -Clamping angle: for workpiece clamping -Dimensions: 165/250/H127 mm -Wall thickness: 20 mm -Number: 1x angle available -Price: per piece -Weight: 12.4 kg/piece

Description Cycle lathe Chevalier FCL-2660 Details Year of construction 2008 Machine no. A40307 C52 Height 2,150 mm Width 2,100 mm Length 3,900 mm Bed width 450 mm Bed height 1,000 mm Bed length 3,600 mm Face plate Ø 620 mm Forkardt Chuck Ø 315 mm Max. workpiece lengths 1,800 - 2,000 mm Turning diameter over bed 660 mm Turning diameter over support 400 mm Center height 330 mm CNC Fagor Cycle Control Lynette Ø 400 mm Outer and inner bolsters

Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Feed roller: serrated -Roll diameter: 270 mm -Transport roller width: 626 mm -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available -Weight: 137 kg

MACC Metal Band Saw TRS 275 Saw blade Ø 275 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, but can be purchased separately.

Key data: 490 mm, 650 mm

Stock-No. 1105-04024 Type of machine CNC Turning- and Milling Center Make MORI SEIKI Type SL 2500 Y /650 Year of manufacture 2003 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight basis ex Warehouse Price Technical details turning diameter 490 mm turning length 650 mm control MSX-805 max. bar capacity 65 mm Travel -X Axis 305 mm Travel -Z AXIS 690 mm Travel -Y Axis +50, -50 mm Max. Speed Main Spindle 4000 min-1 spindle taper 1 A2-6 C - Axis 0.001 ° Spindle bearing diameter 120/85 mm No. of tools in turret 1 10 Shaft Cross Cut 25 x 25 mm Shank diameter 50 / 32 mm Turret Change Time 0.25 s max. spindle speed driven tools 6000 min-1 rapid power traverse in X-and Z direction 30 m/min Rapids C - Axes 400 min -1 drive capacity - spindle motor 18.5 kW power capacity - driven tools 5.5 kW swing diameter ove ...

Fermentolevain Fermento Plant for the preparation and preservation of liquid sourdough with Dual Care system for the best flavors Control of the fermentation phase and preservation phase easy-touch control Mixing time and speed can be adjusted Stainless steel Stirring tools removable with overflow probe and alarm buzzer 2 agitators, double lid Floor and side scrapers for more quality Outlet height 535 mm Tank capacity 200/250 kg Cooling capacity per hour approx. 6°C falling DGUV V 3 tested Connection 400V / 50Hz / 3,3kW, 16A-CEE plug Dimensions: 1040 x 1300 x 1810 mm, WxDxH New machine with 12 months warranty Optional: Built-in scale Water connection with hand shower Cleaning Cycle Maintenance contract Service Package Many more bakery machines in stock!

Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg

Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg

ALDURO Professional Knife WASU 50-230V for perfect results when sharpening your knives ! Backward Sanding Belt 50 x 1000 mm Peel-off felt disc Motor 0.6 kW, 230 V Speed 2850 rpm Belt speed 15 m/sec. Weight approx. 20.5 kg

Belt / roll width: 30 mm Mains voltage: 230V, 50Hz Paper from 70 g/m², film from 80μ (duplex film)

Clamping angle, clamping tower, clamping device, mechanical clamping elements -Clamping angle: for workpiece clamping -Dimensions: 450/245/H365 mm -Wall thickness: 26 mm -Surface: milled -Holes for workpiece clamping: 18/22/25 mm -Quantity: 1x angle available -Weight: 56 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Protection class: IP 44 -Dimensions: 225/196/H160 mm -Weight: 7.7 kg

Siemens Control 828 D Circulation over bed 560mm Circulation via cross slide 390 Circulation via recess 810 mm Center width 3000 mm Headstock Borungh D1-8 Spindle Nose Bushing MK7xMK5 Spindle speed 3 steps, max 2500 Travel Quill 200 mm Diameter quill 75 mm Bed width 345 mm Overall length 5170 mm, width 2100 mm, height 2230 mm Net weight 4000 kg Accessories 2 x chip conveyor, glue bar lathe chuck, turret, quick-change holder, El. Handwheels. 3 x steady rests, coolant system, manuals

Description Cycle lathe Chevalier FCL-2460 Details Height 1,950 mm Width 1,600 mm Length 4,100 mm Bed width 410 mm Bed height 850 mm Bed length 2,300 mm Face plate and chuck possible by arrangement max. workpiece lengths 1,500 mm Turning diameter over bed 600 mm Turning diameter over support 360 mm Center height 300 mm CNC Fagor cycle control function untested Lynette possible by arrangement 4-speed revolver

Manufacturer: Alfa Laval Model: MRPX214 TGV-74 Function:Whey separator/ Cream separator Capacity: 10,000- 12.500 Litres/ Hou rMotor power:15 kW Electrics: 380V/ 50 Hz/ 3 Phase Bowl speed: 1450 rpm Tools Base PlateNew Control Panel New Water system ( Valves, pressure vessel, connections, etc.) Service Spare Parts : Dairy Machinery UK

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 40 mm -Piston diameter: 63 mm -Piston rod: Ø 20 mm -Total length: 260 mm -Total length extended: 300 mm -Dimensions: 75/75/H260 mm -Weight: 2 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Piston: Ø 50 mm stroke: 200 mm -Piston rod: Ø 20 mm -Quantity: 1x available --Dimensions: 65/65/H580 mm -Weight: 4.2 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 80 mm -Piston rod: 22 mm -Total length: 445 mm -Total length extended: 645 mm -Price: per piece -Number: 2x available -Dimensions: 96/96/H445 mm -Weight: 6.6 kg

Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 600 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Total length: 775 mm -Total length extended: 1375 mm -Dimensions: 65/65/H775 mm -Weight: 6 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 250 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Total length: 570 mm -Total length extended: 820 mm -Number: 4x available -Price: per piece -Dimensions: 96/96/H570 mm -Weight: 6.4 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 22.5 rpm -Performance: TA = 120 Ncm -Shaft: Ø 30 x 105 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 350/290/H195 mm -Weight: 22 kg

Inv. Num. : 7817 Type: RUR 2500 G Producer: PIERCE Created: 2014 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 120 mm Equipment: Rails Burning Machine Baths

Inv. Num. : 7827 Type: LKT 250D Producer: PRESSMONT Created: GO 2019 Parameters: Compressive force: 2500 kN Ram stroke: 250 mm Machine weight: 21000 kg

Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Cooler area: 300 x 300 mm -with: fan -Dimensions: 300/160/H360 mm -Weight: 9 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 250 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 63/63/H435 mm -Weight: 3.15 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 200 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -End position damping: adjustable on both sides -Dimensions: 54/54/H400 mm -Weight: 2.2 kg

Key data: 2500

Engine; MTU204000L64 Year of Construction 2024 Operation hours; 0 (New) Electric power; max 2500kWe Construction form; 20 cylinders in V configuration Voltage; 10.5 kV Apparent power; 2.711kVa Speed; 1.500 RPM Frequency; 50Hz Model; Containerized Fully equipped with heat coupling & CHP MTU, GAS GENERATOR, CONTAINERIZED, CHP ROLLS ROYCE

MDR 2000 Rheometer Manuf.: Alpha Model 81001 220V 5amps Power 1000 VA Air pressure required PSI 120 max. / 70 min.

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 200 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 65/65/H450 mm -Weight: 3 kg

Inv. Num. : 7825 Type: OPTIturn D560 x 2000 Producer: OPTIMUM Created: 2011 Parameters: Maximum turning diameter over bed: 560 mm Maximum turning diameter over support: 355 mm Maximum spindle speed: 1500 1/min Maximum workpiece weight: 500 kg Clamping diameter (sub-spindle): 315 mm Motor power: 7.5 kW Length: 3340 mm Width: 1150 mm Height: 1430 mm Weight: 2720 kg

Pneumatic cylinders, air cylinders, standard cylinders -Manufacturer: Westinghouse -Type: 521 295 180 0 -Piston rod: Ø 22 mm -Piston: Ø 80 mm -Stroke: 100 mm -Pressure: max. 10 bar -Quantity: 1 available -Weight: 7.2 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Gildemeister lathe -Tip height: 270 mm -Quill: electrically driven -Foot switch -Recording: MK5 -Number: 1x tailstocks available -Price: per piece -Dimensions: 820/250/H400 mm -Weight: 136 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 220 mm (limited) -Piston diameter: 80 mm -Piston rod: 25 mm -Total length: 555 mm -Total length extended: 775 mm -Number: 2x available -Price: per piece -Dimensions: 95/95/H555 mm -Weight: 6.45 kg/piece

Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction T 100 Force holding extract unit: T 50 Height above ground: mm 5000 Weight: 66 ton

Mori Seiki NL 2500 SY / 700 Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Mori Seiki CNC Version: MSX-850 III Main spindle nose: ASA 8 Main spindle power: 18.5Kw Main spindle bar pass: 80mm Turning diameter: 360mm Turning length: 705mm Main spindle speed: 4000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm Y-axis travel first turret: +- 50mm First turret Z-axis travel: 795mm Fast feeds for linear axes X Y Z: 30m/min Sub-spindle: yes Spindle nose: ASA 6 Number of counter-spindle speeds: 6000 Counter spindle power: 11Kw Bar loader model and brand: Iemca Master 880 Chip conveyor: belt Presetting: yes Machine equipment: Set of fixed and motorized tool holders :::D DIMENSIONS AND WEIGHT::: Length: 4420mm Width: 2 ...

Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

Mori Seiki NL 2000 SY 500 MOTORIZED LATHE :::TECHNICAL SPECIFICATIONS::: CNC Model: Mori Seiki CNC Version: MSX 850 Main spindle nose: ASA 6 Main spindle power: 15Kw Main spindle bar passage: 65mm Turning diameter: 275mm Turning length: 510mm Number of main spindle speeds: 5000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm Y-axis travel first turret: +- 50mm Z-axis travel first turret: 590mm Fast feeds linear axes X Y Z: X 30 / Y 10 / Z 30m/min Sub-spindle: yes Spindle nose: ASA 5 Number of counter-spindle speeds: 6000 Counter spindle power: 7.5Kw Bar Passage: 43mm Z stroke sub-spindle : 625mm Model and brand bar loader: Iemca Master 880 MP-E Chip conveyor: belt Presetting: yes Machine equipment: Extensive machi ...

PLC control, line filter, line filter -Manufacturer: Siemens -Type: Simodrive 6SN 1111-0AA01-2EA0 -Line filter: for regulated feed -Power: 80 kW -Sine wave operation block current operation -Dimensions: 275/200/H480 mm -Weight: 23.1 kg

Famar Ergo 260 Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens Main spindle nose: ASA 6 Inverted lathe: yes X-axis spindle stroke: 820 (335)mm Z-axis spindle travel: 265mm Main spindle power: 31Kw Turning diameter: 250mm Turning length: 240mm Number of main spindle speeds: 5000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of fixed tool positions for the first turret: 12 First turret tool attachment type: VDI 40 High refrigerant pressure: yes External tank system with filter: yes Chip conveyor: belt Other technical data: additional two-tool holder :::D DIMENSIONS AND WEIGHT::: Weight: 10000Kg

Flange bearing -Bore: Ø 20 mm -Mounting hole: Ø 12 mm -Bore distance: 64 mm -Dimensions: 130/130/H50 mm -Number: 16x available -Price: per piece -Weight each: 1.7 kg