129,144 used machines on RESALE, but how to find them? Machine Search
Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Camlock: 3-bolt mount, hole circle Ø 140 mm, short taper Ø 102 mm -Throughout: Ø 77 mm -Weight: 29 kg
Height 2300 mm Width 2700 mm Length 2200 mm Weight 5000 kg Power supply: 400V 50Hz 3N Total power 102 kW Main Material Stainless steel, acid-resistant Cutter Type Vacuum Bowl Cutter Cutter bowl made Stainless steel, acid-resistant Bowl capacity 200 l Number of knives on the head 6 pcs. Knife shaft speed 680-5050rpm Bowl speed 4-16 rpm
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Recess: Ø 200 mm -Bolt circle: 3 x 226 mm -Passage: Ø 76 mm -Weight: 25 kg
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Bayonet: Short cone flange, cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Passage: Ø 81 mm -Weight: 22 kg
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Recess: Ø 210 mm -Bolt circle: 3 x 230 mm -Passage: Ø 80 mm
Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -hard: interchangeable jaws -Base plate for: machine table -Passage: Ø 54 mm -Weight: 22 kg
Manufacturer: Güntner Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 2500kW Air temperature: 30º C. (inlet) Fans: 10 pieces, 2.8kW, 400V, 50Hz, 3 conductors Terminal: Inlet 3xDN100, Outlet 3xDN100 Dimensions: LxWxH = 12,000x2300x1500mm Weight: 2700kg Sound pressure level: 63 dB(A) 10m distance, Year of Make: 2007 Condition: Very good, leakage and fans tested.
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Rezess: Ø 194 mm -Hole circle: 3 x 214 mm -Throughout: Ø 70 mm -Weight: 17 kg
Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws -Mouth size: Ø 200 mm -Recess: Ø 162 mm -Bolt circle: 3 x 180 mm -Passage: Ø 52 mm -Weight: 13 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -without: interchangeable jaws -Throughout: Ø 77 mm -Weight: 18 kg
Height 2200 mm Width 1400 mm Length 2800 mm Weight approx. 1300 kg Capacity 2000 l Power supply: 400V 50Hz 3N Total power 5.1 kW Main Material Stainless steel, acid-resistant Order processing time available in stock Barrel Aeration Valve Yes, Manual Valve Driver type Mikster MCM 023 Variable speed control of the tumbler Smooth adjustment of the barrel speed Tumbler with cooling jacket No Load approx. 1400 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Adapter plate with thread mount: Ø 67 mm -Passage: Ø 51 mm -Weight: 27 kg
Height 1800 mm Width 650 mm Length 1450 mm Power supply: 400V 50Hz 3N Total power 1.1 kW Main Material Stainless steel, acid-resistant Number of heads Single-head Work belt width 300 mm Belt feed adjustmentYes Belt type made of plastic
The data of the machine can be found in the attached files. The machine is still energized and can be examined. The machine is available now.
Three-jaw chuck, 3-jaw chuck -Type: DHB 200x3x5 TGL 30 2332 -Mouth size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 rpm -Short taper mount: Ø 105 mm -Weight: 24 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 270 mm -Throughout: Ø 77 mm -Weight: 27 kg
Brand Lisec Type LBH-25V Fashion model Butyl Coating Machine for Spacer Frames Serial Number 102.36.99.48.0596 Construction year 1996 Weight 0.74ton Assets 3.45kW Air pressure 6bar Water pressure: n/a Length m 3.1 Width m 0.75 Height m 0.94 Working height +/- 0.7m Transport dimensions L x W x H 3.1x 0.75x 1m Min.-max. profile thickness/height 4-24mm / 6-8.5mm Min. mate 120×120 Condition machine working Control type B&R Electric connection 3x380V +N+PE Missing parts As it is Documentation available on request Instructions available on request Electrical diagram Yes Parts list Yes Available software backup Photos/film available: photos
Heynumill 2700-PF from the manufacturer Heyligenstaedt. The machine is also energized and can be viewed at any time. Please refer to the photos for the data If you have any questions or need more information, please feel free to contact me.
used exhaust gas cooler water-cooled MWM 232 for sale MWM Part Number: 6.232.0.930.154
Drive chain, triplex chain, roller chain -Size: 24B-2 1 1/2 x 1 inches -Length: 1.25 m -Number: 13x chains available á 1.25 m -Price: per chain -Weight: 26 kg/piece
Clamping angle for workpiece clamping -Dimensions: 200/320/H220 mm -Thickness: 25 mm -Groove: 20 mm -Surface: milled -Weight: 22.7 kg
Power supply, converter, converter, power supply unit -Type: XT40.241 -Input: 3AC 400 V -Output: DC24V/40A -Dimensions: 250/170/H140 mm -Weight: 1.6 kg
Product number: 2948 Type: sect 200 Serial number: 273-00-129 Year of construction: 2023, NEW! Cutting diameter: max 200 x 180 mm Chamber length: 720 mm Thickness: 1 - 30 mm Speed: 210 / 420 cuts per minute Power: 3 x 400V, 50Hz, 3.5kW Dimensions: 2100 x 900 x 1200 mm Including extra knife
Holder for oil filter MWM 232 for sale Mann & Hummel Part Number: 6751283106 MWM Part Number: 2404242170
Function generator, oscilloscope -Frequency range: 0.2 Hz to 240 kHz -Dimensions: 225/225/H85 mm -Weight: 1.2 kg
diamond core drilling machine -Drill stand -vacuum pump -Core drill: Ø 202 mm (picture) -Machine dimensions: 500 x 370 x H1070 mm -Weight: 53 kg
Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm Magnet Motors, Servo Motor -Max. Speed: 1500 rpm -Shaft: Ø 35 mm -Number: 1x motors available -Price: per piece -Dimensions: 670/206/H245 mm -Weight: 50 kg/piece
STORK LASER SCREEN ENGRAVING EQUIPMENT ( ROTARY TEXTILE PRINTING ) LASER ENGRAVER MAKE : STORK TYPE : STK-2000 YOC : 1988, RENEWED / MAJOR OVERHAUL 2012 LENGTH : 310 CM WITH END RING GLUING UNIT TYPE : STORK SCR-85 LACQUER COATER : TYPE : STORK RSE 3100, Q4B1/2000 YOC : 2000 2 DRYING UNITS SCREEN INSPECTION & WASHING EQUIPMENT COOLING SYSTEM SOFTWARE & HARDWARE FOR ENGRAVER PIPING, DUCTING, CABLING ETC ONE LOT OF SMALL EQUIPMENT USEFUL FOR SCREEN PRODUCTION
Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -max. speed: 1500 rpm -Shaft: Ø mm -Quantity: 1 piece available -Dimensions: 670/206/H245mm -Weight: 51 kg/piece
Water Pump for MWM 232 for Sale MWM Part Number: 6.232.0.952.0020 ; 623209520020 ; 623203810470 ; 623207310010 ; 623409520090
PTC thermistor relay, contactor, semiconductor contactor, contactor -Type: PLC-BSC-24DC/21-21 -Number: 10x relays available -Price: per piece -Weight: 0.07 kg
Safety controller, safety relays -Type: PZE X4 24VDC -Charge: -Number: 45x relays available -Price: per piece -Weight: 0.2 kg
Bosch Injection Pump for MWM 232 for sale Bosch Number: 62801845
MWM 232 / 234 Water Pump MWM Part Numbers: 6.232.0.731.0010 ; 623207310010
Motor 1.3 kW/400 V/50 Hz/3 A, swivel -20° to +70°, pneumatic clamping, suction nozzle 80 mm
PLC control -Type: Simatic 6ES5 240-1AA21 -Number: 1x available -Price: per package -Weight: 0.5 kg
Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley -Angle iron frame: 90 x 90 x 10 mm -Heavy-duty transport trolley -Load capacity: 1000 kg -Quantity: 1 piece available -Price: per piece -External dimensions: 1385/2010/H360 mm -Weight: 126 kg
Clamping plate, welding table, welding table, straightening plate -Width: 1760 mm -Length: 2400 mm -Height: 840 mm -partly with threaded holes -Plate thickness: 50 mm -with supporting ribs -Transport dimensions: 1760/2400/H840 mm -Weight: 2000 kg
1 horizontal cooling water stacking tank, insulated with black plastic mats Contains 41.000 l Manufacturer Behälterbau Bremen, Fabr. Item No. 223/216-L with various centrifugal pumps, all controlled by frequency converters. with complete piping with control cabinet system was used for cooling water production for PET bottle blow molding machines. The entire system is in perfect condition, not dismantled.
Clamping plate, welding table, welding table, straightening plate -Width: 1755 mm -Length: 2410 mm -Height: 845 mm -partly with threaded holes -Plate thickness: 35 mm -with supporting ribs -with vice -Transport dimensions: 1800/2560/H1000 mm -Weight: 2000 kg
Workbench, work table, assembly bench -Width: 2000 mm -Depth: 950 mm -Height: 875 mm -Number: 1x drawers -with storage space for a tool trolley -Weight: 108 kg
Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -spindle tool -Recording: SK50 -suitable for tool changers -spindle dimension -Dimensions: 240/120/H320 mm -Weight: 10 kg
diameter: 250 mm total power requirement: kW weight of the machine ca.: 0,05 t dimensions of the machine ca.: m 1 pc. three jaws chuck - diameter 250 mm bore 80 mm fastening: 4 pcs screws 135 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. three-jaws chuck - diameter 250 mm bore 75 mm with flange plate for mounting on milling table 0320 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Clamping angle for workpiece clamping -Dimensions: 275/150/H215 mm -Thickness: 24 mm -T-slots: 17 mm -milled surface -Weight: 14.5 kg
three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg
diameter: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. four jaw chuck - diameter 250 mm bore 75 mm KK 140 fastening: 4 pcs. screws M 16 / 170 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
