heidelberg 2 color used for sale

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller -MOD: 1/11919-002 -Art.: 234500-14530 - Quantity: 1 piece -Dimensions: 390/105/H325 mm -Weight: 8.2kg

Clamping angle, clamping aid -Bracket made of: aluminum -Clamping angle for: workpiece clamping -side stop rails -Dimensions: 1155/200/H160 mm -Weight: 22 kg

• Stirring volume max. 200 l • Stirring speeds 100-1,000 rpm • Mounting plate 180 x 180 mm • Effective power 80 W • Max. Shaft torque 50 Ncm • Control unit Cimarec Telemodul 40 M (stirring start, stirring time, speed) • Mounted on a mobile stainless steel frame with inclined mounting plate with counter support (format part) for mounting a vessel with Ø 235 mm • Drive 230V/50-60Hz

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaw: 200 mm -Hole spacing: 140 mm/Ø 10 mm -Dimensions: 202/18/H75 mm -Weight: 2.1 kg

Hand lever shears, long knife, sheet metal and round steel shears, lever shears -Mubea: sheet metal and round steel shears -Cutting insert length: 200 mm -Dimensions: 380/160/H1240 mm -Weight: 22 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Festo, standard cylinder type DSNU-20-25P-A -Stroke travel: 25 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm -Price: per piece -Quantity: 6 pieces -Dimensions: Ø 36 x 160 mm -Weight: 0.2 kg/piece

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 280 mm -Inside: Ø 142 - 145 mm -Dimension: Ø 280 x 45 mm -Weight: 13 kg

Brand: C&U Group Shanghai Bearing Co Ltd Model: TM6307/41RS Year of construction: Unused Weight (Kg) approx. 6790 net Number of items in stock 17350 ( approx ) Made in China Comments Contact us for min. quantity Terms of sale Contact us for min. quantity

Used machine for crispy cakes, pressed from roller Saixin 250. Set mixer + roller machine + electric oven belt width 250 mm.

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: Hasco, high-performance cartridge heater -Item No.: 277202 10 x 100 mm -Power: 400W 220V -Dimensions cartridge: O 10 x 100 mm -Weight: 0.1kg

Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck -Outside: Ø 280 mm -Inside: Ø 105 mm -Mounting: Short taper 8 (139.7 mm) -Weight: 13 kg

number of controlled axis: 6 workpiece weight: 210 kg throat: 2697 mm total power requirement: kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Coma Freezer Cell Freezer Cell Freezer Room Internal dimensions: 210cm wide 285cm Depth 203cm high Dimensions: 250cm wide 340cm deep 283cm tall

used, almost new Leica Sprinter 250M digital leveller with accessories see photos, stowed in the hard case 1.2x0.6x0.42 m with wheels.

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 250 mm -Inner diameter: 65 mm -Socket: Cone Ø 103 mm -Bolt circle: Ø 133 mm -Bolt circle: Ø 235/13 mm -Dimensions: Ø 250 x 100 mm -Weight: 13 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: WMW ABW, rotating center point -Type: ZN 205 -Recording: MK5 -Number: 9x centering tip available -Price per piece -Dimensions: Ø 92 x 270 mm / Ø 92 x 270 mm -Weight: 4.7 kg /pc.

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DNU-50-250-PPV-A -Stroke travel: 250 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm/M16x1.5 -Price: per piece -Quantity: 2 pieces -Dimensions: 430/65/H65 mm -Weight: 2.4 kg/piece

Format Range: max. 2250 mm min. 340 mm Features: longitudinal seam, folding bottom, double edge, 4-point gluing, electronic gluing unit HHS XP-E08 with 6 application heads, Primary crusher left, counter, motorized format setting, Friction feeder with vacuum and cycle control, digital position indicators, motorized transfer station, Folding middle station, UV marker, 3 x cutting alignment on the press belt, extended press belt. Overhaul 2023: cleaned, tested, painted and with new conveyor belts, as well as equipped with new transport baths. Miscellaneous: The machine can be viewed while it is running by arrangement.

Multivac R 230, year of manufacture 2001, film width 355 mm, draw-off length 210 mm, free loading section of 1,6 m, MC96II control with LCD monitor, 10 mm side trim, two cross-cut guillotines, height-adjustable discharge conveyor, central chain lubrication, new servo inverter for chain feed, Vario tool with interchangeable formats. Format: 1.1 . 335 mm x 210 mm 2.1 - 167.5 mm x 210 mm 2.2 - 167.5 mm x 105 mm 3.1 - 111.66 mm x 210 mm Total length of the machine 5,15 m Operational and wear parts replaced.

Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T

Handwheel -Socket: Ø 22 mm -Pitch: 35 mm -1 graduation: 0.5 mm -Dimensions: Ø 225 x 160 mm -Weight: 4.6 kg

Spotting ruler, dressing ruler, test ruler, straightening ruler, straightening bar -Spotting ruler: 60° -Ruler length: 2015 mm -Dimensions: 2275/120/H105 mm -Weight: 90 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 700 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Dimensions: 920/95/H95 mm -Weight: 9.45 kg

large working width: 2520 mm for sheets up to: 1.5 mm Upper beam opening width: 180 mm Adjustability bending beam: 40 mm Bending angle adjustment: 135° Weight: 1970 kg Dimensions: 1970 x 750 x 1250 mm

Centrifuge: 1,200x550 mm. Engine: 15 hp.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 320 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Dimensions: 483/53/H53 mm -Weight: 1.85 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Price: per piece -Number: 2 pieces -Dimensions: 345/65/H65 mm -Weight: 2.05 kg/piece

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Theleico: 42A 60-1 I 6 -Outer diameter: 200 mm -Width: 6 mm -Inside diameter: 40 mm -Price: per piece -Number: 19 pieces -Weight: 0.4 kg

Mixer M 260, volume 260 l, max. load 160 kg, connected load 400 V / 2.2 kW Mixer M 260, Volume 260 l, max.capacity 160 kg, electrical connection 4 V / 2,2 kW

Key data: 9000 , 11000

Wartsila 20V34SG Gas Power plant 8.7 Mw 50 Hz 11kV 8.7 Mw at 750 RPM 2004 made in good condition Available in Turkey

Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 225/Ø 13 mm -Dimension: Ø 250/H25 mm -Weight: 7.1 kg

Condenser Guntner Type: GVH 090.2A/2x5-N(D) Cooling capacity: 1057,2 / 920.7 kW Air flow: 279 000/229 000 m3/h Number of fans: 10 x 900 mm Dimensions: 10200 x 2300 x 1450 mm RPM: 890/700 Volume: 323.8 L Quantity in stock: 2 Stock number: SK 108 Condition: Used

WE ARE SELLING AN NICE CONDITION TRUMPF ROTATION. MACHINE IS READY FOR USE. MACHINE INCLUDES ALSO TOOL GRINDER AND EXISTING TOOLS FOR CUSTOMER WE ORGANIZE TRANSPORT AND DISMANTLING AS WELL

VMI 2936L mixing vessel 2001, Stainless, 2936L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with Inoxpa centrifugal pump, 3Ph

Cable pull, wire rope, steel cable, multi-purpose pull, gripping pull -approx. 20 m rope for: multi-purpose hoist on hand reel -Rope diameter: 15 mm -Dimensions: 430/300/H470 mm -Weight: 29 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 11 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. Shipping time: immediately

Converter module -Type: VI-241-CU -Price: per piece -Quantity: 5 available -Weight: 0.2 kg/piece

CNC lathe LYNX 2100 B Manufacturer: DOOSAN Year: 2017 Control Fanuc ... i Series Turning diameter ... 350mm Rotation length ... 330mm inclined bed Spindle bore ... 76mm Turret Machine weight... 2750kg Axis X ... 300mm Axis Z ... 360mm Feed diameter ... 210mm Spindle speed ... 1-4500/min. L x W x H ... 2350x1595x1693mm The machine is in good condition, possible to test under electricity.

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: T (Thyssen) Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 14,100 mm Number of bays per row of shelves: 05 pcs. á 2,700 mm Number of levels plus floor level: 02 pcs. Volume Specifications: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 45 pcs. Total pallet spaces: 45 pcs. Started from: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,000 kg The scope of delivery includes: 06x Pallet rack stand, used Material color: blue Profile dimensions: 100 x 65 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 2,200 mm high 1,100 mm deep 20x Pallet rack trusses, used Ma ...

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel blower -Drive: 0.3 KW -Speed: 2800 rpm -Connection input: Ø 280 mm -Dimensions: Ø 280 x 280 mm -Weight: 12 kg

Recon Part Number: 1216 3130 Gas & Diesel Connecting rod bushing new Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 20 kV/100 V 120/1 A 4.156-0-4.156 MW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Bokö, live centering tip -Type: 2005 -Recording: MK5 -Dimensions: Ø 85 x 252 mm -Weight: 4 kg

4-sided planer and roll forming machine with 5 shafts Finished dimensions 240 x 170

Effort 2000t moving matrix 280 mm landing pad 570 mm landing slider after closing the matrices 390 mm Number of moves of the ram, stroke / min 25 Electric motor power 160 kW Dimensions, mm: LWH = 856053604850, the level above the floor is 3200. Weight of the car without electricity: 239.8 tons. Weight of the bed: Front part: 82 tons. Rear part: 55t. Weight 270 ton

Rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad -Gum plate: from pre-tensioning technology -Thickness: 48 mm -Width: 150 mm -Length: 200 mm -Number: 12 pieces -Price: per piece -Weight: 4.3 kg/piece