heidelberg 2 color used for sale

New industry-standard hotbox for up to 300 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

; Power [PS]: 2719; Gross weight [kg]: 13380; Engine: Perkins 4016-61TRG3; Accessories: Battery, Control Panel

New hotbox in the industry standard for max. 200 bar and up to 28 liters per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

; Power [PS]: 2447; Gross weight [kg]: 12528; Engine: Perkins 4016-61TRG2; Accessories: Battery, Control Panel

High-performance flue gas fan very good condition closed wing for high pressure 15kW V-belt transmissions

Suction fan S 250 Motor power 5.5 KW 400V Air capacity 6700m³/h

Backflow preventer, Check valve, Reto Stop, DN 250, PN10, VAG, new -20% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is € 3,022 excl. If you have a UID number, we will gladly issue an invoice without VAT. As good as new in original packaging! Manufacturer date 2018 The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. Soft-seated slanted check valve opens already at small differential pressures. Valve disc can be used on both sides, therefore double service life of the valve disc. The one-piece and all-around EPDM rubberized disc allows a completely free passage and reduces the adhesion of impurities. Suitable for both horizonta ...

0: 3 St. 0: 80 mm Feed speed: (4 Stufen): 4/8/9/18 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used dough weigher W&P, Type: Parta U 2002 -Refurbished- - Frequency controlled - completely overhauled - Condition: Very good, ready for immediate use - 6 months warranty - Capacity: 1,230 - 2,840 pcs./h - El. Connection: 3x 230 / 400 V, 50 Hz, 3 / 10 A The machine has been completely overhauled and is immediately ready for use. Viewing and test run are possible by arrangement.

; Gross weight [kg]: 5847; Engine: Perkins 4016TAG1A; Accessories: Control Panel, Including: Coolant heater and battery charger

; Gross weight [kg]: 2068; Engine: 1506A-E88TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528

; Gross weight [kg]: 2058; Engine: Perkins 1106A-70TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 394

; Power [PS]: 239; Gross weight [kg]: 2043; Engine: Perkins 1106A-70TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 394

Hamburger forming machine, Sind, NEW Capacity: 2100 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

New KUSING four-sided brush / grinding machine made in Europe. Compact machine with quick adjustment and optional parameters. Technical parameters: Maximum material width: 250 mm Maximum material height: 150 mm Horizontal motor power: 1.5 kW Vertical motor power : 1.1 kW Diameter of the shaft : 40 mm Tool diameter : 200 / 250 mm Minimum possible material length : 250 mm Possible machine versions with 3 spindles KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushing, we offer a wide range of manufactured machines for every application. Parameter changes possible as required. The advertisement was automatically translated. Translation errors are possible.

2 x 10 T, adjustable from 1.3 to 10 T Plunger size 250x250mm forward 10 mm second Backwards 25 mm second Travel 100 mm per side, Interior 200 to 400 mm Two-hand operation Motor 1 KW Tank for 60 L hydraulic oil the machine can also be supplied in other sizes and thicknesses.

grinding length: max. 630 mm grinding width: max. 200 mm workpiece height: . mm x-axis: max. 250 mm y-axis: max. 710 mm distance spindle center to table: max. 500 mm table surface area: 0,25 mm table load: max. 1,1 t table speed -stepless-: 2 - 18 m/min cross feed autom.: . dust exhaust: 0,25 kW coolant pump: 0,09 kW total power requirement: ca. 4,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 2400 x 1600 x 1900 mm Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke, - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed The data for this ad was cr ...

; Power [PS]: 272; Gross weight [kg]: 2782; Engine: Perkins 1506A-E88TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and coolant heater; Water Tank Volume [l]: 528

; Power [PS]: 299; Gross weight [kg]: 2782; Engine: 1506A-E88TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 528

We can offer you a complete line of Breathable menbrance extrusion line,manufactured by Colines,Italy in 2009,the line has just installed and adjusted,never used for production,like new line.the products-- breathable menbrance is for making diaper and hygienic materials.the net web width is 2850 mm,2 extruders,a 90 mm and a 150 mm,,serious buyer contact us,please Please visit manufacturer's website: .colines.it to learn more about this line.

Offer 22187 Roller conveyor height-adjustable Specifications: - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm -Min. Roller conveyor height approx. 600 mm - Max. roller conveyor height approx. 1100 mm - Roll width outside approx. 280 mm - Roll length 2 x 125 mm each - Roll diameter approx. to max. 100 mm - max. possible number of rolls 10 pcs - 7 pairs of rollers are built-in - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg

pressure: 200 t distance between columns: 1600 mm max. ram stroke: 600 mm dayligth: 900 mm table width: 1600 mm table depth: 1300 mm table height: 1060 mm ram surface: 1600 x 1300 mm T-slots: Din 650 / 22H12 rapid traverse: 400 mm/s return speed: 325 mm/s pressing speed: 42 mm/s bei 40% mm/sec pressing speed: 20 mm/s bei 100% mm/sec die-cushion pressure: 800 kN die cushion stroke: 150 mm speed of die cushion: auf 68/ ab 225 mm/s The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: rund 250 mm cutting diameter: vierkant 230 mm cutting diameter: flach 280 x 200 mm dimensions of saw-band: 2950 x 27 x 0,9 mm sawing stroke: 290 mm weight of the machine ca.: 610 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw-blade dia.: 210 mm Cutting height: 70 x 305 mm Cutting height at 45°: 35 x 305 mm saw blade turning speeds: 4500 U/min Motor output: 1,5 kW machine weight ab.: 9 kg Dimensions (L/W/H): 340 x 500 x 740 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 170 mm dimensions of saw-band: 2080 x 20 x 0,9 mm table height: 880 mm cutting speed: 40 + 80 m/min : 170 mm : 125 mm : 150 x 190 mm : 95 x 120 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 870 x 1.550 x 1.740 mm mm Miter band saw Demonstration system at a special price ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: kW weight of the machine ca.: 0,35 t The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GALLUS EM 280 – 8-color Year of Manufacture: 2003 ________________________________________ Product Description:  Webwidth: 280mm  8 flexo printing units, set for quick unit change  8 UV curing Ist with water cooled chill roller  8 Pneumatic Doctor Blades  Unwinding, splice table, webguide,  Rewinder  Infeed unit  Spindle 3"  Diecut station for 2 diecuts with 1 diecut unit, 2nd position empty  Drive Unit Standard  Label Counter  Mech Matrix Removal Unit Spindle 3"  Output section ( pull station )  Rewinding unit  Pneum Winding Spindle 3"  tension roller  Web break and 1 matrix break detector  Razor knifes  Automatic register control ( incl diecut )

Wheel diameter: 200 mm Cutting height: 80 mm cutting width: 180 mm Motor output: 350 W Table dimensions: mm Table tiltable: 45 Grad saw band length: 1400 x 6,5 x 0,35 mm machine weight ab.: 12 kg Dimensions (L/W/H): 700 x 600 x 700 mm Wood band saw with extendable and swiveling saw table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 35 + 70 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Winding machine Böhl type SENIOR / S-2400 VA Specifications: • Fully automatic • For packaging rod-shaped products • Product height (mm): 19 - 600 • Product width (mm): 600 - 2100 • Product length (mm): 2400 - 5700 • Product weight (kg): 3000 • Cross-sectional diagonal max. (mm): 2184 • Brake motor for winding ring drive: controlled by frequency converter • 2 driven roller conveyors: each 3000 mm long for the inlet side of the machine, designed with brake motor • 2 driven roller conveyors: for the outlet side of the machine (1 piece 3000 mm long, 1 piece 4400 mm long) designed with brake motor • 1 packing material holder: for stretch film, crepe paper, PE film etc. • Packing material roll width max. (mm): 500 • Automatic gripping, cutting and laying device: for PE stretch film, in version as smooth cut • Electrical device for laying edge  ...

Bitzer CO2 composite system type TPS4-2FHC-3K with 4 compressors type 2FHC-3K for TK

working width: 2000 mm for sheets up to: 3 mm Clear stand width: 2050 mm Stand discharge: 250 mm Support table size: 220 x 2200 mm electr. Drive: 380 V, approx. 5 kW Weight: 2.7 t

An indestructible machine for the toughest conditions. The machine is suitable for processing raw wood. The machine has no inclination. The saw blade is located directly on the motor. Technical parameters: Maximum saw blade diameter: ø 500/mm Power of the main motor: 5.5 kW Main speed of the saw blade: 2850 rpm Maximum cutting height: 85 mm (with 350 mm saw blade) Inclination of the saw unit: NO Dimensions of the iron table: 1050 × 600 mm Aluminium formatting table: 2000 × 360 mm / OPTION 3200 x 360 mm Formatting table for hardened rods (Altendorf principle) Cutting length: 2000 mm Weight of the machine: 450 kg Given the prices of new Chinese machines that cannot withstand the harsh conditions, this machine is the solution. Made in Slovakia in Europe

Floor oven Heuft BTO 21623 Thermal oil - Heuft shared oven - Model BTO 21623 - with 5 floors - of which 2 pull-out stoves - Floor width 120cm - Floor depth: 160cm - with exhaust hood including fan - Total baking area approx. 10sqm

SAA 2001 Aspirator Suction nozzle on the device 125mm Suction nozzle on the distributor 100mm Height 2000mm Weight 47kg Motor 1.5kw 230V 50Hz Nominal volume flow 2553 m³/h G&STÜ-5922201

Make Duplo Model Ultra 205A Year 2010's Min size 210 x 297 mm Max size 521 x 710 mm Substrates 120 - 350 grams Speed 10-40 meters per minute (roughly up to 4,500 A3 sheets per hour) Feeder SF-205 Automatic suction feeder Details batch counter, cleaning function, air knife, touch screen controls, set up by the computer

RAANTEC DELTA 250 UV – Converting Year of Manufacture: 2003 ________________________________________ Product Description:  Web width: max. 10 inch – 254mm  1x die-cutting unit  1 x inking unit UV Flexo 1-colour with corona and dust removal  1 set of impression cylinders  Unwinding 850mm  Winding on large roll and small roll possible  Ran all the time only in single-shift operation. Machine Specifications and Equipment: ________________________________________ Accessories Included:  Manuals  Keys  etc. ________________________________________ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) ________________________________________

Hot and cold water high-pressure cleaner Working pressure: infinitely variable up to 220 bar max demand quantity 26l/min Pump:3-Plunger,All-Ceramic Engine: Kubota 3-cyilinder diesel Motor power: 13kW Speed motor and pump: 3,000/1,760 rpm Pump drive: V-belt Fuel consumption: 3,9l/h Volume fuel tank: 70l Pressure outlet: (water): M22 1.5 AG Heating capacity Olbrenner : max 1115kW (ca 95° C) Consumption Olbrenner: approx. 7l/h Construction: Skid - Construction Empty weight: about 420kg Dimensions(LWH) 12080112cm Article no.: 1 546 712

Catalog No. : 5936 Type: W 200 HB Producer: ŠKODA Made in: 1986 Characteristic: Control system: HEIDENHAIN 530 Minimum rotary speed of the spindle: 0.8 1/min Maximum rotary speed of the spindle: 630 1/min X-Axis travels: 16200 mm Y-Axis travels: 5250 mm Z-Axis travels: 1600 mm Taper: ISO 60 Spindle diameter: 200 mm Machine height: 8000 mm Machine length: 20000 mm Machine width: 10000 mm Equipment: Chip convoyer 2008: renovation (new control. wiring and drives)

Key data: 370 mm, 650 mm, 3500 1/min

Machine Details Stock-No. 1105-04067 Type of machine CNC Lathe Make DAEWOO Type PUMA 250 B Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Corea Delivery time to be agreed Freight basis ex Site Technical details turning diameter 370 mm turning length 648 mm control Fanuc 18 t bar diameter 77 mm swing dia. 570 mm swing diameter over cross slide guide 255 mm max. turning diameter 255 mm drive capacity - spindle motor 18.5/22 kW turning speeds 3500 rpm Turret (X-Stations) 10 pos. JAPAN rapid traverse X-axis 24 m/min total power requirement 32 kW weight of the machine approx. 6 t dimensions of the machine approx. 3.43 X 1.85 X 2 m Additional information GOOD MACHINE WITH CNC FANUC 21 IT 3 JAW CHUCK DIA 250 MM SCHIP CONVoYEUR TOOL SETTER COOLANT INTERLOKED GUARDS

Center height: 300 mm Turning diameter: 600 mm Distance between centers: 2100 mm Eccentricity: max 140 mm Self centering chuck diameter: 200 mm Work piece weight: max 250 kg Grinding diameter: 224 mm Work piece turning speed: 18/40/63/90 rpm Grinding wheel dimeter: 915 mm Grinding wheel thickness: 32-63 mm Grinding motor: 7,5 hp Size: 5000 x 2100 x 1700 mm Weight: 4900 kg Includes 3 wheel hubs and 4 used grinding wheels

We offer a refurbished Peri Trio 270 formwork 198.28m² complete with accessories as follows. Frame cleaned, corrosion sealed with zinc phosphate coating. New original Peri Finply formlining. Accessories new, or Peri rental storage quality. New value approx. 145766,50€ Special net price 64706,00€ approx. 56% discount Pcs. Description 16 Element TR 270 x 240 new frames, new formlining 8 Element TR 270 x 120 new formlining 8 Element TR 270 x 90 new formlining 4 Element TR 270 x 72 top used formlining 4 multi-purpose elements TRM 270 x 72 new formlining 10 Element TR 270 x 60 new formlining 8 Element TR 270 x 30 new formlining 2 stripping elements TR 270x 24 new formwork lining 6 Corner TE 270-2 new formlining Accessories TRIO 130 Richtschloss BFD, verz. 30 TAR 85 compensating bolts 16 Scaffolding bracket TRG 80 2 Moving hooks MAXIMO 1.5 t new 1 new MX trans ...

Tool grinding machine Jungner US-2305 Table: 1020 x 114 mm, clamping surface: 625 x 114 mm Distance between centers: 305 mm Work piece diameter: 225 mm Travels: -X: 350 mm -Y: 90 mm Spindle motor: 0,55 kW Spindle speed: 3400 / 5000 / 6700 rpm

Synchronism Panel SICES 2000A 4P

Machine Details Warehouse number 1105-03632 Machine type CNC turning and milling center Make INDEX Type G 200 Year of construction 1997 Control type CNC Controller C200- Siemens 840 C Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from location Technical details Turning diameter 200 mm Turning length 400 mm Controller C200- Siemens 840 C Circulation diameter 420 mm Rod diameter 65 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - Spindle motor 100% ED= 7.5/13/20 kW Drive power - Spindle motor 40% ED= 13.3/22/29 kW Rod diameter 65 mm Spindle bearing diameter 100 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - spindle motor 100% ED= 7.5/13 kW Drive power - Spindle motor 40% ED= 13.3/22 kW C - axis 0.001 ° Number of revolvers 2. Turret head (x-fold) 2 x 14 pos Travel - x ...

XG-25B industrial furnace is designed to heat a charge placed in an induction coil by means of high-frequency current. In this process, the AC current flowing through the primary coil generates an alternating magnetic field around the charge. This field in turn induces electromagnetic forces in the secondary circuit, resulting in the heating of the charge. This solution makes the XG-25B2 induction furnace much more efficient and economical than other furnaces available on the market. The main power and control components are IGBT and MOSFET components, which enable the unit to operate strictly within the required technical parameters. The offer also includes a water tank, water pump, table and foot switch controller. The electric induction furnace weighs just 26 kg. Technical specifications of the XG-25B furnace - input voltage: 380 V ± 10%; 50/60 Hz - input power: 5-25 kVA - outp ...

Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS

Type: Vemag LPG 202 The LPG 202 length portioning machine links sausages with identical lengths and weights It can process cooked and raw sausage in natural, collagen and cellulose casings The LPG 202 length portioning machine is compatible with the following filling machines: AVG 201 ROBBY / ROBBY 2 ROBOT HP-series ROBOT DP-series Sausages are produced in the calibration range from 14 to 40+ mm Link all types of casing Extremely accurate lengths and weights Gentle treatment of casings Linking speed can be adapted to the type of casing Hygienic operation Casing magazine for artificial casings (optional) Device to detect ends of natural casings (optional) Delivery time: Machine is ready for delivery

Blustrafos Transformer BLUTRAFOS MANUFACTURER LOT: 45,908 MONTH/YEAR 05/2007 REF 6606,0001 REFR: IN TYPE TT CLASS ISOL. 1.2 KV DEGREE. PROT. IP-21 PHASES 3 TEMPERATURE CLASS: TEMPERATURE B ELEVATION 105 ºC IMPEDANCE AT 115º C 5.5% POWER 15 kVA FREQUENCY 60 HZ DYM1 CONNECTION GROUP MASS: 156 KG VOLTAGE: 380 CURRENT 22.8 A VOLTAGE: 480V CURRENT: 18.04 A