heidelberg 2 color used for sale

Key data: 350 , 41 , 25

Manufacturer: Arburg Type: 221K 350 - 100 Year of construction: 2001 Control: Selogica Closing force: 350 kN Locking type: Knee lever Tie bar spacing: 221 mm Plate size: 324 mm x 250 mm Tool height: min 150 mm - 300 mm Opening distance: 200 mm Plate spacing max.: 350 mm - 500 mm Screw: 25 mm Stroke volume: 49 ccm / 41 gram PS Injection pressure: 2000 bar general Engine: 7.5 kW Heating: 4.5 kW Dimensions: 2.7 m x 1.4 m x 2.2 m Weight: 1150 kg

Key data: 2400 KW, 3000 kVA, 400 V

ENGINE: MTU 20V4000G63 FREQUENCY (HZ): 50 VOLTAGE (V): 400 POWER: 3000kVA / 2400kW CYLINDERS: 20 STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 24500kg DIMENSIONS L/W/HEIGHT (MM): 830029502550 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with ...

Key data: 200 KW, 250 kVA

ENGINE: Man E2676LE202 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: BIOGAS COOLING: WATER-COOLED WEIGHT: 4400kg DIMENSIONS L/W/HEIGHT (MM): 430013002000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details an ...

Manufacturer: Arburg Type: 270 S 250 - 150 Year of construction: 1997 Control: Selogica Closing type: Hydraulic Closing force: 250 kN Tie bar spacing: 270 mm x 270 mm Plate size: 400 mm x 400 mm Tool height: min 200 mm Opening distance: 275 mm Plate spacing max.: 475 mm Screw: 25 mm Lifting volume: 54 ccm / 45 gram PS Injection pressure: 2500 bar general Engine: 11 kW Heating: 4.8 kW Dimensions: 3.2 m x 1 m x 1.6 m Weight: 2100 kg Screen text: German Optional extras Core train x2 Robot interface Air valve Sorting flap

Key data: 250 , 33 , 25

Manufacturer: Arburg Type: 270 S 250 - 60 Year of construction: 1997 Control: Selogica Closing type: Hydraulic Closing force: 250 kN Tie bar spacing: 270 mm x 270 mm Plate size: 400 mm x 400 mm Tool height: min 200 mm Opening distance: 275 mm Plate spacing max.: 475 mm Screw: 25 mm Stroke volume: 39 ccm / 33 gram HP Injection pressure: 1800 bar general Engine: 7.5 kW Heating: 2.7 kW Dimensions: 3.2 m x 1 m x 1.6 m Weight: 1900 kg Screen text: German Optional extras Picker Gaiger Robot interface Air valve

Wet belt grinding machine EDERTAL BSM 200 The Edertal wet belt sander is ideally suited for sharpening knives, hatchets, cutter knives, axes, etc. The wet grinding ensures a long service life of the cutting edges, as annealing of the blades is hardly possible. In addition, the permanent water cooling achieves an optimal and permanent sharpening result. The BSM 200 grinding machine is a compact, robust and high-quality grinding machine that is made entirely of stainless steel. The sanding belt attached to the right side is tensioned and aligned by a stable clamping device. On the left-hand felt disc, in combination with a polishing paste, the ground tools can be tightened and deburred. The design and the material used comply with the hygienic and occupational health and safety requirements as well as the EC directives. Specifications: Power supply: 230 V Input power: 3 ...

Key data: 250 , 17 , 18

Manufacturer: Arburg Type: 220 S 250 - 60 Year of construction: 1999 Control: Selogica Closing type: Hydraulic Closing force: 250 kN Tie bar spacing: 220 mm x 220 mm Plate size: 400 mm x 400 mm Tool height: min 150 mm Opening distance: 275 mm Plate spacing max.: 425 mm Screw: 18 mm Lifting volume: 20 ccm / 17 gram PS Injection pressure: 2500 bar general Engine: 7.5 kW Heating: 4 kW Dimensions: 2.9 m x 1 m x 1.6 m Weight: 1900 kg Screen text: German Optional extras Robot interface Air valve Hot channel integrated

Key data: 350 , 41 , 25

Manufacturer: Arburg Type: 221K 350 - 100 Year of construction: 09/2005 Control: Selogica Closing force: 350 kN Locking type: Knee lever Tie bar spacing: 221 mm Plate size: 324 mm x 250 mm Tool height: min 150 mm - 300 mm Opening distance: 200 mm Plate spacing max.: 350 mm - 500 mm Screw: 25 mm Stroke volume: 49 ccm / 41 gram PS Injection pressure: 2000 bar general Engine: 7.5 kW Heating: 4.6 kW Dimensions: 2.7 m x 1.4 m x 2.2 m Weight: 1200 kg Optional extras Core train x1 Hot channel integrated

- Minimum quantity spraying device (option) - Roller conveyor 400mm with intermediate plates and machined surfaces (option) for measuring stop - Additional support leg (option) - Attachment kit for fixed connection (option) - Measuring track with magnetic reading strip (option) - Stop, hand-operated, roller guide and digital display (option) - Saw blade dimensions: 3100 x 27 mm - Cutting range at 90 degrees around 250 mm - Cutting range at 90 degrees square 220 mm - Cutting area at 90 degrees rectangular 275 x 180 mm - Cutting range at 45 degrees around 200 mm - Cutting range at 45 degrees square 180 mm - Cutting area at 45 degrees rectangular 190 x 130 mm - Cutting range at 30 degrees around 130 mm - Cutting range at 30 degrees rectangular 125 mm - Cutting area at 30 degrees square 130 x 110 mm - Cutting speed 37/74 m/min - Hydraulic feed - Lifting brackets hydraulic ...

Key data: 700 , 121 , 35

Manufacturer: Arburg Type: 320 KS 700 - 250 Year of construction: 2001 Control: Selogica Locking type: Knee lever Closing force: 700 kN Tie bar spacing: 320 mm x 320 mm Plate size: 476 mm x 476 mm Tool height: min 200 mm max 400 mm Opening distance: 250 mm Plate spacing max.: 650 mm Screw: 35 mm Stroke volume: 144 ccm / 121 gram PS Injection pressure: 1820 bar general Engine: 15 kW Heating: 6.1 kW Dimensions: 3.3 m 1.45 m x 1.6 m Weight: 2190 kg Screen text: German Optional extras Robot interface funnel

Semi-automatic, double-sided mitre band saw with turntable Swivel bracket design, mitre angle: 30°-90°-45° Material tension: hydraulic, saw bracket feed: hydraulic, Lifting bracket: hydraulic, speed: 37 / 74 m/min, belt dimensions: 3100 x 27 mm, 45°: round 240, square 240, rectangle 260x220 mm, 30°: round 190, square 180, rectangle 200x100 mm, saw feed infinitely adjustable via fine throttle, hydraulic material tension, opens and closes automatically, quick-release vise, can be used to the right or left of the belt, Ball-bearing turntable with grid and quick clamp for holding the saw frame, Particularly easy swivelling of the bracket, Large doors for easy belt change from the front, Manually stepless adjustment of the mitre angles, Material feed from the left or right possible Lifting bracket hydraulically, Automatic adjustment of the stirrup height according to material diame ...

Manufacturer: Arburg Type: 420 C 1000 - 270 Year of construction: 2007 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar spacing: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 35 mm Stroke volume: 144 ccm / 132 gram PS Injection pressure: 2000 bar general Engine: 15 kW Heating: 6.4 kW Dimensions: 4.3 m x 1.6 m x 2 m Weight: 3880 kg Screen text: German Optional extras Core train x1 Robot interface

Exhaust manifold MAN D 2842

Code 61063 Description Surface grinding machine Make ABA Model FFU 2000/60 Serial No. 208 125 Control Abamatic 3 Year 1986 Tablesize 2510 x 500 mm Grinding surface L x B x H 2000 x 600 x 700 mm Magnetical plate size L x B 2000 x 500 mm Speed table movement 3 – 30 m/min. Max. distance table – centre grinding wheel 900 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 50 x Ø 127 mm Spindel power 26 kW Spindel speed 1600 - 3000 rpm Motor power 26 kW – 380 Volt Total electr.com. 34 kW Total space L x W x H 7000 x 3500 x 2650 mm Weight 10500 kgs Accessoiries Elec. Magneticplate 2000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in good condition

Extraordinary precision Milling, engraving or cutting is possible with the highest precision, due to the high-quality inclined toothed racks installed on each axis. Ideal for processing plate material With the large machining area, the T-Rex is the best possible choice for milling plate materials, as well as for text or image engraving on 2D, 2.5D or 3D workpieces. Thanks to a assembly aid on the short side of the CNC milling machine, the work surface can be ideally and comfortably equipped with the plate material. The ball rollers allow an effortless glide of the plates. External dimensions LxWxH: 3780x2850x1950 mm Weight: circa 1950 kg Clamping surface XxY: 3030x2020 mm Travel XxYxZ: 3000x2000x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: approx. 0.015 mm Working speed: 12000 mm per minute  ...

Peak height 2,600 mm Point distance 10,000 mm Closed bench 2,000x6,000 mm To be completed with CNC

Height tips 220 mm Useful length 1,000 mm 42 mm bar pass

Spindle diameter 2,000 mm Turnerable diameter 2,000 mm MACHINE IN MECHANICAL/ELECTRIC RETROFIT PHASE

QTY. 1 SECOND-HAND PASTA / NOODLE PRODUCTION LINE – FOR SHORT AND LONG PASTA Mfct.: Macri (Italy), Braibanti (Italy); Capacity: approx. 260 kg/h; Built: 1990 & 2000, Status: still on foundation, stopped in 2022 General description: The pasta factory currently works with 2 x 160 Kg/h presses, one for long pasta and one for short pasta. The drying capacity of each dryer is +/- 500 kg. To fill them all it takes +/- 15/16 hours, i.e. two work shifts. Required area: 805 sqm., approximately L x W x H = 35 m x 23 m x 7 m Consisting of: 1 Automatic frame stacker 2 Stacker with protective grilles 3 Entry of frames into stacker 4 Idem 5 Entrance of the frames into the shaker 6 Frame loader 7 Entrance Long pasta packaging - Tonelli spreading machine with mushroom. 8 Tonelli spreading machine with mushroom - Long pasta packaging 9 Entry Packaging of long pasta 10 Group of 6+3  ...

5 Qty. 1 Continuous 6 Stand Cold Rolling Mill Mfc.: Fröhling Built: 1984 Type: 4-Hi Strip width: 220 mm Thickness: 0.15 – 2 mm 8 Qty. 1 Strip welding machine (Cold mill) Mfc.: A.I. Welders Built: 1986 Rev. in 2002 Speed: 75 – 600 m/min. Width: 233 mm Thickness: 0.175 – 2.0 mm 9 Qty. 1 Induction Treatment Furnace (Cold mill) Mfc.: Otto Junker Built: 1986 Width: 220 mm Thickness: 0.175-2.0 mm Speed: 8-60 m/min. Temp.: 550 °C 10 Qty.1 Quenching unit (Cold mill) Mfc.: Otto Jumker Built: 1986 Flow: 95 m³/h Temperature: 29 °C Size: 1.2 x 1.2 x 2.8 m 11 Qty. 1 Rotary shear (Cold mill) Mfc.: HDE Built: 1996 Strip width: 220 mm Thickness: 0.1 – 0.95 mm

peak heights: 250 mm point distance: 1500 mm bar pass: 105 mm

Capacity up to 250 kg/h Melting container capacity 35 kg stainless steel with casting device with vibration table Connection 8.2 kVA Electrical heating resistance 4.5 kW with cooling compressor, coolant R134a Cooling capacity 7.5 kW with touchscreen operation with 1 year warranty, operating errors excluded

Key data: 500 mm, 1000 mm, 5000 1/min

Machine Details Stock-No. 1105-04017 Type of machine CNC Lathe - Inclined Bed Type Make MAZAK Type SQT 200 L Year of manufacture 2003 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time Immediatly Freight basis Ex site Price Technical details turning diameter 360 mm turning length 1000 mm control MAZATROL FUSION 640 T swing diameter 350 mm spindle turning speed - stepless 5000 rpm Spindle Motor 15 kW Bar Material Dia. 51 mm X-Axis 190 mm Z-AXIS 1000 mm weight of the machine approx. 5 t dimensions of the machine approx. 3.6 x 1.8 x 2.0 m Accessories 12 - Tool Turret Tool - Eye tailstock

Code 8529 Description CNC Bed milling machine Make Zayer Type 2200 BF 3 Machine nmb 52248 Year 1986 Control Fagor 8020 Table size 2200 x 800 mm Movement table (X) 1830 mm Cross traverse ram (Y) 1016 mm Vertical traverse milling head (Z) 1016 mm Spindle taper ISO 50 Max. Weight on table 4000 kg No. of spindle speeds 18 steps Spindle speeds 28 – 1800 rpm Feeds dir. Progr. X-Y-Z 3 – 5000 mm/min Rapids Longitudinal 5 m/min Cross 5 m/min Vertical 5 m/min Total Weight 10.000 kg Mainmotor 11 kW Power connection 38 KVA Voltage 380 Volt Accessories Milling head Horiz./Vert. with ISO-50 Hydr. tool clamping device Condition Machine is in good condition

completely stainless steel loaded : 50 to 55% 3.7 kW with vacuum pump with filters Dimensions (L x W x H): ± 2,300 x 1,700 x 1,800 mm

Max Bending Length 2250mm Machine is in excellent condition - As New LOW HOURS

Very high-quality CNC – controlled precision sheet metal round bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive  ...

Filter system for low-viscosity liquids Manufacturer: Mahle Type: AF11363-1321-21000-3864/G1 All information without guarantee

Siemens Simoreg, 6 RB 2025-2EA00, Type D165 G200/25 M5REQ Not checked for functionality. Sold only to traders!

Frequency Brand: Heinrich Baumüller Type: BKF/12/100/400-2002 Power Converter Not checked for functionality. Sold only to traders!

BEYELER PR6 ROBOT 60 X 2550 MM CNC press brake was built in 2001 in Germany. This extremely powerful and reliable machine is used for precision bending of workpieces with a maximum length of 2550 mm. The sturdy construction in combination with a press force of 60 tonnes and a perfectly optimised CNC control makes the machine ideal for a wide variety of applications in unit and series production. The BEYELER PR6 Robot press brake weighs 7200 kg. Technical specifications of the BEYELER PR6 ROBOT 60 X 2550 MM press brake - CNC control - press force: 60 t (600 kN) - maximum bending length: 2550 mm - bending speed: 1-10 mm/s - return speed: 200 mm/s - slider stroke: 265 mm - maximum response time: 110 ms - minimum safety distance: 350 mm - motor power: 5.5 kW - maximum air pressure: 8 bar - power supply: 3x 400 V; 50 Hz - dimensions (L x W x H): 3000 x 2100 x 2700 mm - weight  ...

RLA 210 Clean air dedusters Metal fan wheel Inspection opening for cleaning the bypass filter manual cleaning Extraction of wood chips Not suitable for grinding dust mobile very quiet High extraction performance with small footprint Suction nozzle 200mm Nominal volume flow 2262 m³/h Volume flow max. 3700 m³/h Negative pressure at Vnenn: 2482 Pa Filter area 22m² Dust class M Residual suction content H3 Chip drum volume: 2x165l LxWXH 1755 x 830 x 1800mm Motor 3kW 400V 50Hz Weight 259kg G&STÜ-5132100

specifications: - Welding current 300 A 60% ED - 230 A 100% ED - Welding current adjustable from 10 A to 300 A - Current consumption 400 V / 19.5 A / 10.7 kVA - with: - E.- welding cable - Ground cable - Connection cable - Space requirement approx. W 600 x H 900 x D 1000 mm - Weight approx. 180 kg

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 18,5 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4260 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max diameter of the product processed over: bed, mm 2 500 support, mm 2,000 Smallest diameter of the workpiece, mm 500 Distance between centers, mm 12,500 Max weight of the processed product, kg 100,000 Spindle speed, rpm 0.8-50 Threading: metric (step), mm 2-96 inch (threads per 1") 20-3/8 Angle of rotation of the upper part of the caliper, 90˚ Speed of accelerated extension of the quill, mm/min 310 Accelerated movement of the tailstock, m/min. 2.9 Accelerated movement of the caliper, m/min 3.1 Longitudinal feed of the caliper, mm/rev 0.159-49.6 Ratio of longitudinal to transverse feed 2.5 Main drive electric motor power, kW 125 Machine dimensions, mm: length 20 900 width 4 350 height 3 280 Machine weight, kg 162,500

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

The scope of delivery includes: 01x Wire mesh, used Material colour: sendzimir galvanised Version: laid up Total depth: approx. 1,218 mm Inner depth: approx. 1,203 mm (bearing rod direction) Column depth: approx.: 1,200 mm Clear span: approx.: 1,095 mm Width: approx.: 1,370 mm Truss support: approx.: 54 mm Mesh size (1): approx.: 130 x 55 mm Mesh size (2): approx.: 110 x 55 mm Material thickness wire: approx.: 4.00 mm Number of bars: 11 pcs. Dimensions: 1.095x50x1.5mm Weight / piece: approx. 13.07 kg General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD 0: 20mm (s) Ampullen/h 0: mm 0: mm total power requirement: 22 kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: 4260 x 1660 x 1590 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell a pietroberto fork kneader. The machine is ideal for flatbread doughs. Used and overhauled / Warranty

max. wheel diameter: 3000 mm gear width: 1200 mm max. module: 30/40 min. module: 2 table diameter: 2500 mm table load capacity: 400 kN hob dia. - max.: 450 x 500 mm milling spindle speeds: 10 - 165 U/min hob length max.: 500 mm tip circle diameter: 2050 mm tooth helical angle min/max: 0 - 45 ° center distance betw. workpiece-tool min/max.: 150 - 1750 mm milling slide swivelling: 50 Grad distance table / counter stay: 1050 - 2050 mm shifting: 300 mm workpiece weight: 40 t table bore diameter: 800 mm depth of hole: 1100 mm main drive motor: 37 kW min. workpiece diameter: 290 mm min. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/min radial feed: 1 - 500 mm/min feed: Tangential 1 - 450 mm/min rapid traverse: 1875 / 530 / 470 mm/min electrics - voltage/frequency: 380 / 50 V/Hz control: Siemens Sinumerik 3M total power requirement: ...

with max. print repeat 1350 mm 8 + 2 colors Ink system: solvent based Printing width max. 1.250 mm Material width min. 600 mm max. 1.300 mm Print repeat min. 400 mm max. 1.350 mm . Winding System automatic sequence („flying splice") Unwindinq Reel diameter : max. 1.000 mm Core inside diameter Rewindinq 76 mm/152 mm Reel diameter max. 1.000 mm Core inside diameter 76 mm/152 mm Web tension range min. 20 max. 500 Mechanical speed max. 460 m/min. Drying system Gas Materials to be printed all plastic films like PE, PP, OPP and others as well as film laminations in a thickness range of approx. 10-120 microns (depending on substrate), paper/laminations up to approx. 100 g/m 2 , tubes and other material also for rear printing in 26S/2 print decks.  ...

This is a solidly built stainless steel work table closed on the left side, 6 adjustable feet, with a shelf and an upstand of 50mm. Due to its solid construction, it is also very suitable for food production companies. The work table is new and unused, still foiled. The price quoted is net plus 19% VAT. OUR USED EQUIPMENT SERVICE FOR YOU: •High-quality brand-name appliances at fair prices •Professional overhaul / inspection & expert cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected •Competent advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 seal SPECIFICATIONS: •External dimensions WxDxH: 2700x850x900mm •Backsplash 50mm •left side closed •a shelf Condition: New, unused VERSAND / SHIPPING:  ...

DV EC 250 Pro Roof fan with EC motor and pressure control Roof fan with EC technology. Aerodynamically designed housing made of high-quality polypropylene in grey, diagonally blowing. Operating range from -30 to +80 °C. Integrated guide vanes for optimum efficiency. For horizontal mounting. Diagonal impeller made of aluminium, motor-impeller unit dynamically balanced. Electronically commutated DC outrunner motor with ball bearing for continuous operation. High efficiency even in regular operation. Maintenance-free and radio interference-free. Stepless speed control with the speed potentiometer P.. 10 (Accessories). In conjunction with the universal control system EUR EC (accessory), the fan can be used to control differential pressure, differential temperature or flow velocity. Dimensions: L=57cm / W=57cm / H=55cm Original price Fr. 2600.- 2 pcs. available

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 11 kW weight of the machine ca.: 4,570 t dimensions of the machine ca.: 3830 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 15 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4260 x 1160 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 30mm (S) total power requirement: 37 kW weight of the machine ca.: 15,3 t dimensions of the machine ca.: 4510 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

Tensile testing strength: 420 kg pulling force - max.: 2360 Kg weight: 380 kg battery: 24 V / 240 Ah battery: Gewicht: 320 Kg weight of the machine ca.: 700 Kg Dimensions (HxWxD): 1,2 x 1,2 x 1,4 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2500 mm y-travel: 1000 mm z-travel: 1000 mm Control: Heidenhain table surface area: 2600x800 mm turning speeds: 2100 U/min spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm swing diameter: 3200 mm turning height: 3100 mm Control: R&D type: MTC 2x-2 workpiece weight: 20000 kg slide adjustment: 1600 mm side head - cross travel: 1000 mm Tool changer: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.