heidelberg 2 color used for sale

very well maintained APV tubular UHT plant. Suitable for the sterilization of highly viscous product with high dry matter, such as sauces and concentrates. Capacity in currently setup variable up to ± 3000l / hr. ( capacity up to 6000 lt/hr for low viscous products is possible with bigger homogeniser) Equipped with 2 ALFA LAVAL SHL20 Homogenizers, one in aseptic execution and with ball valves. Supplied with complete documentation and many spare parts. Yom. 1993, excellent condition.

Frequency converter Mitsubishi Freqrol A200, 15/18,5 KW - mint condition Manufacturer: Mitsubishi Electric Type: FR-240-E-15K-EC Technical data: 15/18,5 KW Input: 3PH AC380-415V 50/60Hz Output: AC380-415V, 0.2-400Hz, 15/18.5 KW 31/34A With manual, without control panel, if you need one, this can easily be purchased on Ebay. Attention! We have set the market lowest price for the part. We have more, but the amount is ending. We carry other frequency converters at very reasonable prices. Buy more than 1 piece, there is still a great discount. Mint condition! The part was bought from a spare parts warehouse of a company, was there for several years in the warehouse but was never in operation. We give you a functional guarantee for 6 months. Should the unit fail, we will replace it with a new one or refund the purchase price.

Seydelmann AU 200-B, 200 mm automatic grinder, all stainless steel, hopper capacity approx. 400 litres, 2 working worm speeds, 3 feeding worm Speeds, refurbished. The machine is immediately available, and can be tested in our facility in Koblenz, Germany.

Several used robots Brand: KUKA Type: KR 200L 120/2 Year of construction: 2000 Hours of operation: approx. 800 Nominal / load capacity: 120 kg Additional load at rated load: 80 kg Maximum total load: 200 kg Arm length: 1400 mm Max range: 2810 mm Repeatability: +/-0.3 mm Engine power: 19.8 kW Working volume: approx. 65 m ³ Weight: 1140 kg Accessories: -Control hardware and software -Handheld -Connection cable Usage possibilities: -Spot welding -Manage -Mount -Application of adhesives, sealants and preservatives -Edit: milling, drilling, grinding, brushing, polishing... -MIG/MAG welding -YAG-laser welding -Waterjet cutting On request at an additional cost: -Training, programming, commissioning ex works (without customer-specific applications). -Programming and commissioning with customer-specific application -Paint in color of your choice The picture ...

Daub baking master 27 m² Stove is in excellent condition, General and thorough overhauled. Works like new. New steam apparatus. New electrics New stove incl. daub thermal oil boiler plant Sales including freight and installation upon request I also have to sell other uberholt DAUB oven THERMO oil Price on request Contact: + 48 692 345 660 anbox.pl

Retrofitted in 2005 electrical / CNC control Siemens 840 d Retrofitted in 2012 and 2019 mechanical what made. Technical datas: Rotary spindle speed: 1.25-600 tr/min Spindle maximum power: 55 kW 215 tr/min Horizontal run of the upright on the bench - X 15,000/30,000 mm . X travel 30,000 mm is for both machine Vertical stroke of carriage on upright - Y (mm) 5,600 mm Spindle stroke - 1,100 mm Z: Flowing stroke - w: 1,100 mm Advance - X: 3-5000 mm / min Feed - Y: 3-5000 mm / min Feedrate - Z: 1.5 2,500 mm / min Total weight: 100,000 kg Foundation pit OSTEO. for both machine Length x width x height: 40,000 x 5,000 x 1,800 mm all accessories are available and can be sold at extra costs. For both machines are the following attachments available: â?¢ Chip conveyor For both machines including lubrication and coolend unit for the cutting operation &aci ...

Capacity: 2500 ton Slider stroke: 190 mm Size of a working course of slider before its extreme bottom position corresponding nominal capacity: 4.5 mm Number of slider courses per minute: 20 Maximum distance between table and slider (in lower position of slider): 800 mm Distance adjustment between table and slider: 20 mm Table overall dimensions: - from front to rear: 1400 mm - from left to right: 1250 mm Thickness of a under-forginig plate: 230 mm Hole diameter in a table: 125 mm The size of a slider in front - back: 900 mm Lower eliminator stroke length: 190 mm force of the bottom pusher: 75 ton Distance between railings: 950 mm Course of a pusher in a slider: 15 mm Capacity of a pusher in a slider: 25 ton Admissible number of starts per minute: 10 Machine overall dimensions - length: 3910 mm - width: 3920 mm - height: 6220 mm Press weight: 97715 kg

System: 1-track rotary cup filler Performance: 1,500 - 1,800 cups per hour Cup diameter: up to 100 mm Dosing system: movable piston-valve filler Cleaning: Manual Filling volume: e.g. 100 500 ml (adjustable) Casing and frame: Stainless steel 1.4301 and MAKROLON Control: Siemens SP 7 with 4" touchpanel and colour display Power: 0,9 kW / 400V - 10A Air consumption (at 6 bar): approx. 340 l / min Weight (net): approx. 500 kg Dimensions (L x W x H): Basic dimensions: 820 x 820 x 1.600 mm including filler and evacuation: about 2,000 x 1,300 x 1.600 mm Machine stations basic version: - Cup magazine with automatic destacking - Piston valve filler for pasty products, e.g. Greek yoghurt, fruit yoghurt, cream, etc. Volume: e.g. 100-500 ml (others on request) -Board magazine and trailer -Hot sealing station -Cups lift and pull Options: -transfer dev ...

Karl Schnell emulsifier Power: 9 kW

Flender engine, water cooled, with pump 3 ~ engine: ANWA-250ME-04 K No.: 3189850, IN the 2302, 1996 400 V VDE 96A 73.7 HP/55kW, cos. P. 0.87 50 Hz, 1475/min, th CI F, IP 54 DIN VDE 0530/91 DIN IEC 38/87, 0.530 t Cooling water consumption 15 l / min.

Centrifugal pump Manufacturer: W. Schmidt K.G. Bretten. Type: Delta A 218/1 Usage area: wine pump Engine: Power: 1.5 HP Revolutions: 2840 RPM In very good condition!

Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI

Force of pressure: 150 t working width: 4500 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: 1000 mm Electr. Supply: 380 V, 18.5 kW weight: 14.8 t space: 4200 x 2000 x 3000/3150 mm

Storage tanks outside marbled for wine, water, fruit juice, schnapps 10.250 liters NEW! Measurement und weight: Diameter: 2060 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra charges)  ...

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

Make: GEA Küba Germany Type: CAV N09-2X3C Power: 606/497 kW (star/triangle connection) Pipe capacity: 209l 2 split circles with 3 fans each 6 fans a 900mm diameter

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

Consecutive wrongly ordered / project change! 2 piece Complete agitator with lantern, 2-piece agitator shaft, mechanical seal, gear motor, 2 stirring organs, quench entry, quench outlet, but without Thermosiphon. Installation and operating instructions. Price/piece

Generator 0 hours of operation (stock)

IBEX MOG 2130BA Serial No. 931278 / 01B 400V, 5.5A integrated fan motor Connections: DN 80 Double mechanical seal, sealingwater connections

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 10.250 liters NEW! Measurement und weight: Diameter: 2060 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra  ...

Gr. Working width: 1530 mm for sheet metal up to: 2.5 mm opening width upper beam: 290 mm adjustable beam: 90 mm upper cheek drive: 1,1 kW under cheek drive: 3 kW Backgauge: Yes Weight: 2200 kg space requirement: 800 x 3000 x 1380 mm

Producer: Alpina Description: -Hopper capacity: 60l -Paddle rotor (teflon paddles) -Twister -Efficiency approx 300kg/h

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Work table: 750 x 290 mm, table height: 185 mm band length: 2600 mm strap width: 150 mm abrasive belt rear: 850 x 200 mm grinding unit swiveling: 90°-45° belt speed: 20 m / sec. Additional table: 330 x 330 mm oscillation stroke: 20 mm Oszilationsmotor: 0.25 (0.34 kW) suction connection Ø: 120 mm motor power output S1 100%: 3.0 kW (4,0 PS) motor power S6 40%: 4,5 kW (6.0 HP) voltage: 400 V machine dimensions (W x D x H): 1700 x 700 x 1080 mm weight approx.: 180 kg

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible

2pcs 3500 x 2000 x 350 mm price 7000eur/pc

GE UroView 2800 (urological x ray and fluoroscopy) with the following device components: Generator Jedi 00-883988 -01 _ 65 kW Tube Varian A-286 0.3/1.2 Image amplifier _ 00-884063-01 32.5 cm OEC workstation ESP Cine (trolley with double monitor) Sony Video Graphic Printer UP-960 CE Review-/double monitor (flat screen) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do ...

Producer: Suhner Description: - Capacity- 2000l - Brand new microprocesor Mikster MCM 023 - Variable drum speed - Automatic control - Variable pressure level - Pressure measurement; 0-99 % - Manual work mode - 50 programs easy to change - 6 cycles to one program, max cycle time 100h, two phases on cycle - Total time one phase 99 minutes - Brand new inverter Lenze Section responsible for vacuum; - Vacuum pump Busch 36m3 /h - Vacuum valves Danfoss - Total power 5.5 KW ( main motor 4KW + pump 1,5 KW ) - Total weigth 1500 kg - Fully made of stainless steel

Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Pillow-pack machine Max 80 packages per minute thermally sealed

M.- No. : 827

MASSON MARINE GEARBOX RSD 201 / 3.978:1

Producer: Servotech 250 mm Description: Servotech (Brand new) -Throat diameter 250 mm -Output 5000 - 10000 kg/h -One speed motor -Full power 37 kw -External dimensions: 2070 mm x 1070 mm x 1685 mm -Hopper capacity aprox 300 l -Total wiegth 1500 kg -Machine is fully made of stinless steel -Mixing /grinding temperature to -15°C -Two sets of knives; one for frozen, and one for fresh meat.

Powershift gearbox ex Hakotrac 1800 DA due to fire damage, axle and PTO gearbox not complete, untested, housing damaged, according to Fig. Missing parts such as diff.lock and PTO shaft from gearbox ex 2250 DA and other used parts such as lamella coupling, differential, axle shafts, power lifter, Yanmar diesel engine, radiator etc. available - see sample photos. Info and offers on request. We do not send package offers, no lists and do not respond to anonymous messages - please provide full name and place of residence as well as telephone number for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, env ...

1 x Buzuluk 240 litre Internal mixer Model: 14630, year: Dec 2008 (body and hopper), Batch size: 200 kgs, Drilled sides, Self sealing type dust seals, Oil injection, Hydraulic drop door with linear actuator and toggle latch, Stellite faced drop door, Two wing tangential rotors. 20in pneumatic hopper. 3 zone TCU Full unidrive gearbox (Make Skoda), with 630kW, 6000V, 739rpm, 73.5A slip ring motor and Oil filled starter. In very good condition.

Compressor Bitzer 4FE-28Y-40P

ISO refrigerated container 20ft standard box, manufactured to ISO 1496-1 Type: 22R1 State - used and processed (on request new paintwork at an extra cost!) - Current PTI check - CSC approval - ready for immediate use Visit of our offered containers is possible at any time on site! Color Pure white RAL 9010 TECHNICAL DATA - Dimensions on the outside: (L x W x H) 6,058 x 2,438 x 2,591 mm - Dimensions inside: (L x W x H) 5,412 x 2,292 x 2,300 mm - Volume: 36.5 m3 - Weight: 2.88 t - Payload: 21.12 t - Temperature range: -25°C to +30°C - Refrigeration carrier: R134a - Power: 6-10 kW/h (indicative! Real values depend on several factors.) - Cooling unit: Carrier Streamline (2006 built), 380-460 V, 50-60 Hz, 5-pin plug/CEE 32A - Transportable and crane-capable - PTI check (= Pre Trip Inspection) function check - CSC safety approval SPECIAL USE / CONVERSION (on  ...

McIntyre 200B Shear Available with or without a stand, this machine might look small but it has a big cutting capacity Small but powerful McIntyre's wide experience in hydraulic equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only a blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it. Our company can provide this equipment with short delivery time.

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.

used vertical tool presetting device in very good condition, ready to use Recording: SK 50 max. tool length: 460mm max. tool diameter: 400mm Optics: 20x optical magnification Energy supply: Current: 220Volt 50 HZ luminous flux connection Pneumatics: 6 bar air pressure connection Machine space requirement: (w x t x h) approx. 1400 x 800 x 1700mm (without operator and service environment) Accessories / Optional equipment: â?¢ Machine cabinet with compartment â?¢ Calibration mandrel / reference mandrel â?¢ Adapter holder Iso 50 to Iso 40 for SK 40 tools Bdujvng8ha â?¢ Adapter holder Iso 50 to VDI 30 â?¢ Adapter holder Iso 50 to VDI 20 â?¢ Adapter holder Iso 50 on special tool holder â?¢ Additional measuring clock holder â?¢ Tool positioning device to 4 x 90° â?¢ Operatin ...

M. No.: 2277

Waterjet 2x3m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Used pumps either Knam/H2O 40HP alternative KMT/Ingersollrand SL4 30hp completely overhauled. New surcharge KMT SL5 classic 50PS/37KW 90.000,00 Construction training & service directly from the manufacturer, including

Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head

The synchronous generator Flash 2500 S is in good condition, ready to use. Built in approximately 1997 Weight 36 kg 230 V, 50 Hz, 9.7 A 2 kVA 3000 min IP 23 Altitude 100 m above sea level. NN Ambient temperature 27 � C Radio interference level DIN 57875 spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

20ft (6m) Standard Box Container 8'6", first trip (new) manufactured according to ISO 1496-1, made of weather-resistant Corten steel, planked inside with 28mm waterproof hardwood floor, with CSC approval (5 years validity) ALSPCONTAINER® PRIME SERVICE & QUALITY In our depot in Freilassing we always have new containers in different colours and finishes in stock. This ensures a short delivery time and the possibility to visit the containers before purchase. LOOK FOR YOUR CONTAINER US! PrimeQUALITY As a very special service, we offer the option to buy a flawless first-trip container. For this purpose, transport damage is professionally repaired and dirt is removed. State As good as new / First trip â with slight traces of usage due to a one-off sea voyage Color Gentian blue RAL 5010 or subject to availability TECHNICAL DATA - Dimensions on ...

Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...

Single Belt Press EB 1004 Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1670x 1680 mm Weight: 1340 kg Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh wate ...