132,112 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Kautex Model: KBS2-20/40-S90/22D Year of Manufacture: 1999 PLC control: Siemens S5 Grinder: Rapid 3545 Conveyor Material feeding system Piovan Dedusting system Piovan Automatic component gripper and scale Spare parts Control Voltage: - AC: 230 V - DC: 24 V Working Voltage (AC, 3-phase): - Drive I: 400 V - Drive II: 400 V - Heating: 400 V Frequency: 50 Hz Rated Current: - Drive I: 285 A - Heating: 70 A Maximum Fuse Rating: - Drive I: 315 A (time delay) - Heating: 100 A (fast acting) Find more here - / Contact us at -
Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Working length: 2040mm, max. cutting capacity: 3mm, stroke rate: 30strokes/min, table height: approx. 850mm, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 2400mm/2000mm/1450mm, weight: approx. 1500kg. An on site inspection is possible.
used
Key data: 3500 kN, 70 mm
DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm
A Schechtl swing bending machine for sheet metal processing is available. Working length: 2040mm, opening height: 140mm, bending capacity: 3mm, bending speed: 50°/s, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 3000mm/750mm/1250mm, weight: approx. 2750kg. On-site inspection is possible.
A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible.
amplification -fold: 30 spindle taper ISO: 40 spindle taper:: M16 / DIN 2080 voltage: 6 V Packing: 0,430,25010 m Shipping weight: 4 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Mechatronika reflow soldering oven with automatic conveyor with stainless steel mesh is available. Conveyor width: 260mm, max. PCB component height: 25mm, heating length: 900mm, max. temperature: 280°C, conveyor speed: 180mm/min. Machine dimensions X/Y/Z: approx. 1650mm/600mm/400mm, weight: approx. 80kg. Documentation available. On-site inspection is possible. Image is an example.
sheet width: 2520 mm plate thickness: 4.0 mm ST thickness at Niro-steel: 2.0 mm upper clamping bar adjustment: 250 mm adjustment speed: 100 mm/sec Adjustment folding beam: 80.0 mm Bending speed: 120 Grad/sec compressed air: 6.0 bar work height max.: 869 mm control: POS 2000 total power requirement: 6.0 kW voltage: 400 V weight: 4100 kg range L-W-H: 4120 x 2400 x 2090 mm current list price ~ 90.000 euro from a maintenance workshop with excellent equipment () new touchscreen installed in 2023 Features: - CNC electro-motorized universal bending machine High-precision mechanics with modern control technology For individual and series production Robust high-speed machine with high axis speeds Torsion-resistant welded construction - SCHRÖDER CNC control model POS 2000 Control panel front right (operable with PC mouse) Touchscreen replaced in 2023 Color display USB interface Autom ...
width of the strips: 75 mm band length: 2000 mm band speed: 36 m/min total power requirement: 4 kW weight of the machine ca.: 82 kg dimensions of the machine ca.: 1000 x 500 x 1150 mm Belt sander Metallkraft MBSM 75-240-1, article no.: 3923272 For sanding surfaces, edges and rounding off Description: - Powerful motors and vibration-free operation for the best sanding results - Quick sanding belt change in seconds thanks to quick-release system - Large surface sanding area thanks to fold-away upper sanding belt cover - Continuous sanding surface after removal of attachments enables sanding of long workpieces too - Can be used with and without extraction - One extraction nozzle on the spark box and one on the rear belt roller - Simple adjustment of the belt run via adjusting screw - Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system - Infinitely tilta ...
Dimensions (L/W/H): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Features: Volume 11200 L Material V2A (AISI 304) 1.4301 Manufacturer: Rieger Cubic design Number of feet 4 Total height 2500 mm Length 5250 mm Width 1450 mm Surface marbled on the outside Surface inside IIID Last Use Food Description Topsoil: Flat bottom 1 reinforcement profile in the middle 4 crane eyes Airlock DN50 Cylinder: 4 cool pockets on the side Level indicator with bar and scale Manhole oval Tasting tap Nozzle Flap Size 37 Ladder hooks Sewage drain DN50 with angled seat valve Underbody: Flat bottom with 3% slope forward-drawn outlet surround with disc valve DN50 4 profile feet with domes – height-adjustable 4 reinforcement profiles
Maximum efficiency with Frami! Are you looking for reliable formwork elements for your construction project? Then we have just what you need! Our Doka Frami Xlife elements in heights of 1.50 m and 1.20 m impress with their quality, durability, and ease of handling. 🔧 ✅ High reusability †thanks to the robust Xlife coating ✅ Lightweight & practical †for quick and efficient processing ✅ Versatile use †ideal for a wide range of construction projects Get yours now and benefit from proven professional quality! 🚀 💡 Good to know 💡 We also have the necessary Frami accessories available in stock at Form-on †just ask us! Price: from € 103,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding ...
🔵 Frami as far as the eye can see! 🔵 Looking for high-quality formwork elements? Then you’ve come to the right place! We offer Doka Frami Xlife elements in heights of 1.50 m and 1.20 m †the perfect solution for efficient and durable formwork. ✅ Robust & durable †thanks to the Xlife coating for high reusability ✅ Lightweight & efficient †ideal for quick and easy handling ✅ Flexibly combinable †suitable for various construction projects Get your Frami Xlife element today and benefit from quality that convinces! 💪🏗ï¸ Price: from € 143,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. 189 x Frami Xlife panel 0.75 ...
Discover the EuMax 30/250 prop from MEVA †reliable, robust, and with a permissible load capacity of 30 kN at any extension length. When combined with the MEVA formwork system , even higher load capacities are possible †perfect for versatile applications on the construction site. These props are particularly suitable for medium to low load requirements . Each prop is individually checked and ready for immediate use †fully in line with our high-quality standards. 💡 40 props = 1 full stackable pallet. This pallet ensures efficient transport to you and your construction site and is already included in the total price . If you have any questions or need more information †just get in touch. We’re here for you! Price: from € 820,00 / Stapelpaletten (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible Subject to prior sale Classi ...
Dont miss this deal: Doka floor props Eurex 20 top 250 in âââ star quality! 👀 All the advantages at a glance: individually tested - the thread can be opened and screwed together durable thanks to impact protector inner and outer tube hot-dip galvanized easy height adjustment thanks to permanent hole numbering extension length from 1.48m - 2.50m can be loaded with 20kN at any extension length 💡 40 props are supplied in 1 Doka stacking pallet 1.55x0.85m. This is already included in the total price. We will also be happy to supply you with all the other components you need, such as beams, 3-layer panels or even 4-way heads and removable folding tripods. Simply get in touch with us by phone 📞 or email 📧. Price: from € 1295,00 / Stapelpaletten (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible S ...
🔧 Doka Adjustable Strut 220 IB †Excellent Used Condition 🔧 ✅ Application: The 220 IB strut is used as the lower bracing for the 540 IB element prop. ✅ Quality: Each strut is individually inspected and fully functional . ✅ Condition: Shows signs of careful use , but completely reliable . ✅ Delivery: Struts are delivered on stackable pallets . (⚠ Pallet not included in the price per piece) 💡 Summary: Durable Doka material in excellent condition †ready for your next construction project! 🚧 ❓ If you have any questions or need more information, feel free to contact us! 📞âœ‰ï¸ Price: from € 58,40 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suit ...
📏 Compact & clever †the MANTO 1.20 m and 0.60 m! Need formwork for lower wall heights or looking to add flexibility to your setup? Then the Hünnebeck MANTO at 1.20 m and 0.60 m height is just what you need! 🔧 The MANTO 1.20 m and 0.60 m is part of the trusted Hünnebeck wall formwork system †robust, durable, and highly versatile . With hot-dip galvanized steel frames , it’s made to handle tough site conditions and daily use. 💡 💼 Especially practical for details: The 1.20 m and 0.60 m panels are easy to handle , quick to install, and ideal for small surfaces , foundations , or as a smart add-on where flexibility is key. And of course, they can be used horizontally or vertically , and combined as needed. 🔁 And just like always: 📦 Accessories? Absolutely! Our warehous ...
Features: Volume 2880 L Operating pressure 2 bar Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Overall height 2650 mm Height 1400 mm Diameter 1400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description: Operating temperature 20 °C Topsoil: Clapper bottom 2 crane eyes T-piece with CIP line and pressure relief valve CIP Ball Tank cylinder: Level measurement at the top Manhole 350x450 mm Ladder hoes Flange Underbody: Clapper bottom 2 x drain in subfloor 4 trumpet feet, height-adjustable, with washers
Stainless steel mixer with Lodige/Loedige rakes 2000 liters Type FKM 2000 D / 6Z Two side inspection doors One side port for liquid mixture injection Manual discharge hatch 6 side shredders / rotating knives Usable volume from 500 to 1500 liters, Elec:: 380V 50Hz 56A , Engine: 30kW 40CH
Two induction sealing machines are available. 1) Shandong Better Onward Machinery LGYF-2200, foil material: aluminum, container material: nonmetallic bottles, sealing diameter range: 20mm-150mm, bottle height range: 20mm-600mm, sealing capacity: 120-300bottles/min, machine dimensions X/Y/Z: approx. 750mm/650mm/1600mm, weight: approx. 50kg. 2) Guangzhou Dingwei Machinery DW-4200, sealing diameter range: 15mm-130mm, bottle height range: 50mm-350mm, machine dimensions X/Y/Z: approx. 700mm/750mm/1400mm, weight: approx. 40kg. Documentation available. On-site inspection is possible. The images are samples.
An 8-station rotary filling machine Breitner including accessories is available. The machine was used for filling mustard jars. Glass volume: 250ml, filling capacity: 6000pieces/h, filling stations: 8. Format adjustment possible if required. Documentation available. On-site inspection is possible.
table length: 4000 mm table width: 2000 mm burner heads: 1 laser capacity in Watt: 4 kW Capacity steel: mm Control: MicroStep total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Working area: 4000 x 2000 mm + additional space for pipe cutting - Linear guides: Rexroth - Double-sided driven portal via racks: ATLANTA precision helical gearing on all axes - Gearbox: STOBER - Drives: Maintenance-free, processor-controlled AC servos from Panasonic - Maximum positioning speed: 130 m/min (one axis), 180 m/min (two axes simultaneously). Acceleration 10 m/s² Positioning speed of the Z-axis 50 m/min Travel distance of the Z-axis 150 mm Acceleration of the Z-axis 0.75 G Position deviation Pa 0.07 mm according to VDI/DGQ 3441 Repeatability Ps 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Machine in very g ...
For sale are 2 Veit electric steam stations 60 KW Unit price 1.450 €
Working width: 220 mm Working height: 120 mm Working height 4-sided: 120 mm Number of Spindles: 10 Spindle arrangement: urlrlououuni Spindle diameter: 50 mm Spindle speed: 6000 rpm Counter bearings: 1-6-7-8-9 Jointer: 1-2-3-4-5-6-7-8-9 Motor powers: 7.5-7.5-11-11-11-15-7.5-11-11- kW Feed speed: 8-80 m/min Feed motor: 18.5 kW Feed: Hydraulic Table lubrication: automatic Weight: 9000 kg Space requirement: 700x160x140 mm Voltage/Frequency: 380V
We sell from stock 2000 Gates timing belts per piece 34,50 € on request also plastic/stainless steel conveyor rollers EL 415mm Diameter 50 mm
2000 Toshiba BTD-200QF CNC Horizontal Boring Mill Spindle Diameter: 4.33" Extended Quill Diameter: 7.87" Taper In Spindle: #50 Vertical Head Travel, Y-Axis: 39.37" Table Cross Travel, X-Axis: 39.37" Spindle Travel, Z-Axis: 15.74" Saddle Travel, W-Axis: 27.55" Table Size, (2) Pallets: 39.37" x 39.37" Table Capacity: 6,000 lbs Table Indexing: 0.001 Degree Rapid Traverse (X,Y,Z Axes): 472.4 IPM Feed Rates: .04-236.2 IPM Table Load Capacity: 6,600 LBS Spindle Speeds (2 Ranges): 20-3000 RPM Floor Space, L x W x H: 173" x 174" X 126" Machine Weight: 39,600 lbs. -EQUIPPED WITH- Tosnuc 888 CNC Controls 40-Station Automatic Tool Changer (2) 39.37" x 39.37" Pallets with Pallet Shuttle System Thru Spindle Coolant Marposs Probing System Chip Conveyor 30 HP Spindle Motor
A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible.
- KOSMO 3 indexing head Sk-50, 0,02 Degrees, 1195 Nm - Spindle extention L = 600 mm with 2000 Rpm - 3D Measuring probe MP60 - ATC Chain 60 Positions - Coolant system 1320 L with 4,8 Bar - Rotary indexing table 2000 x 1600 x 15 ton - V-Axis (in feed) 1500 mm - Rotation 3 U/Min - HeidenHein RON 700 encoder for Table rotation - Ram size 500 x 500 with 56 kW - Chip conveyor
A small Striffler glazing bead saw is available. Cutting speed: 36m/s, working length: 2400mm, miter setting: 45°, max. cutting width: 75mm, max. cutting height: 50mm, saw blade dimensions X/Y: 250mm/220mm, weight: approx. 100kg. An on-site inspection is possible.
- Producer Schuko - Type FATi-SR 200/30 - Width ~ 3000 mm - Height ~ 2.100 mm - Height with ventilator 2.690 mm - Depth ~ 900 mm - Trockenabsaugung - With filter mat - With paper prefilter - With exhauster - Ventilation system performance, exhaust fan 8.900 m³/h - Motor power 2,6 kW - Exhaust pipe 350 mm - Without switch - Ausführung/Schutzart EExe ii, T3 - In zinc plated steel - Voltage / HZ 400/50 - Location on stock
- Producer Sorbini - Type T/20MF - Year of construction 1997 - Working width 1.300 mm - Maschine is overhauling, very good condition - Working height ~ 880 - 920 mm - Part height ~ 5 - 80 mm - Operating side, left - roller diameter ~ 248 mm - Metering roller ~ 174 mm - Reverse drive - Double diaphragm pump 1 Stk. - Length 950 mm - Width 2.550 mm - Height 1.540 mm - Weight ~ 1.220 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Voltage fluctuation max. +/- 5 %
CNC Lathe TAKISAWA TMM 250 M1 CNC Model nFanuc 2011 CNC Version 31i - Model B Main spindle nose ASA 8 Main spindle power 22 Kw Main spindle bar passage 75 mm Swinnable diameter 350 mm Swinnable length 800 mm Main spindle rpm 4000 Number of Tool Turrets 2 Tool positions first turret 15 Motored positions first turret 15 X axis travel first turret 265 mm Y axis travel first turret + - 50 mm Z axis travel first turret 760 mm Tool positions second turret 15 Motored positions second turret 15 X axis travel second turret 228 mm Z axis travel second turret 760 mm Rapid traverses X Y Z 30 m/min High pressure coolant yes Counterspindle yes Nose spindle ASA 6 Counterspindle rpm 4000 Counter spindle power 18.5 Kw Counter spindle Z travel 800 mm The machine is visible operating in our warehouse in Gussago BS. Mimu machine tools
Stanko 2M55 Mk5 Admission in drilling-spindle (morse): Mk5 Max drilling capacity: 50 mm Base dimensions (1) Table dim (2) : 1650 x 830 mm Longitudinal travel drilling-head (X-axis): 1375 mm Height-travel arm (Y-axis): 1200 mm Max dist.round column -- drillingspindle: 1600 mm Speeds: 20 -> 2000 rpm Power on the spindle: 4.5 kW Cooling system: 4,7 ton
The Hidrostal Betsy 125GG (popularly also called eekels pump), has been a great success for years! main reason for this:, , spacious dirt passage, pumps viscous liquids with solid particles, high output against a particularly low engine power, suctions very quickly and up to a great suction height (8.5 meters), blockage-free wear-resistant screw centrifugal impeller, can slobber and can run dry, , Machine can be used well for:, , pumping sludge, Keeping sewer wells and cellars dry, everywhere that really needs to be sucked and slobbered, emergency pump unit including fire brigade, water boards and, Water purification, pumping surface water, keeping construction pits and construction trenches dry, , MAX capacity : 342 m3/h at 1500RPM , 400 m3/h at 1800RPM, MAX head : 26 mwc at 1500RPM , 39 mwc at 1800RPM, MAX dirt passage : 100 mm, , Throughput capacity: 340 m3/h, Max dirt passage: 100 ...
Key data: 80 KG, 33600 mm, 2150 mm
We offer: Shelving system, used partial quantities possible. Material: 17 double stand frames, approx. 2,150 mm 80 shelves, approx. 2,100 mm Depth of a shelf, 2 x 200 mm = 400 mm Load per floor: 80 kg from stock 21698 Harsefeld. Price valid only while stocks last. Subject to changes and errors.
General SKU409X1293 LocationBarneveld CEcheck Specified Features - Miscellaneous Motor12 volt Information MakeKonica Minolta TypeSpectroradiometer CS-2000 Mach.No.D 1003173 Floor space0,88x0,63 m Total height0,90 m Weight60 kg Extra SpecificationsLuminantie range 0.003 till 500.000 cd/m2, contrastmeting 100.000:1 meter, measuring range wave length 380 till 780 nm with resolution off 0.9 nm/pixel. On aluminum frame, : without laptop MiscellaneousKonica MinoltaMiscellaneous > MiscellaneousBrand > Konica Minolta What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Manufacturer: AMADA Model: AC-2510 NT Year of Manufacture: 2008 Technical data: Punching force: 200 kN Punching drive: Servo-electric drive Machine frame: Bridge frame Travel range (X x Y): 2500 x 1270 mm Positioning speed (X-axis): 80 m/min Positioning speed (Y-axis): 90 m/min Axis simular velocity: 100 m/min Control: AMNC-F Find more here - / Contact us at -
MICROSTEP MSF-Pipe-T 6501.200L tube and profile fiber laser was built in 2018 in Slovakia by MicroStep spol. S.r.o. The machine, which is designed for precision cutting of tubes and profiles of various cross-sections and non-standard shapes, is an excellent choice for modern business. This is because a number of state-of-the-art technical solutions guarantee the most accurate cutting results throughout its entire service life. 2D or 3D cutting is performed by means of a stable 2 kW fibre optic beam, which is generated by a resonator of the highest energy efficiency. The 3D laser scanner accurately measures the workpiece before machining to determine its actual shape along the cutting trajectory. Advanced algorithms then allow the control system to appropriately adjust the movement of the cutting tool and supports, as well as compensate any workpiece inaccuracies. The work area is c ...
weight max. in kg: 2000 kg stroke: 3,3 mm fork length: 1200 mm battery: 48V / 575Ah weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1,2 x 3,5 x 2,19 m Electric forklift with charger. Only 2500 operating hours New battery in 2017 3.3-meter duplex mast 2000 kg lifting capacity 2.19-meter clearance height With side shift and fork adjustment Very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: SMS, Junker, Allen Bradley Force: 2500 MT Built: 1983 Modernised: 2017 Allen Bradley Ethernet Control System & NITROGEN DIE Cooling system Billet dia.: 8” Length: 450 – 950 mm Scope of supply: Log Loading Table Log Furnace Extrusion Press Run-out table Single Cable Puller Cooling Ventilator System Section Stretcher Storage Table Finishing Profile Saw Aging Furnace Die Heating Furnace Automatic Stacker Spare Parts
Indexing dividing setting: 1e stage full rotation setting 5 Gr. 2e stage full rotation (fine) 30 Turning rotation setting: 1e stage 1 - 48 Rpm 2e stage 0,27 - 11 Rpm V-Axis movement setting: 1e stage 10 mm 2e stage (fine) 0,02 mm Scraped guide way 1 size: 300 x 85 mm Scraped guide way 2 size: 225 x 85 mm Scraped guideway 3 size: 250 x 85 mm
The ProJet 2500 Plus (part of 3D Systems’ MJP 2500 series) is a professional MultiJet Printing (MJP) 3D printer designed for high-quality prototyping 1171 Hours Specifications Build Volume 294 × 211 × 144 mm Build Chamber – Support Material Wax Z-Axis Resolution 32 µm Operating Principle MJP (MultiJet Printing) Operating Software 3D Sprint Machine Specifications Weight – Dimensions 1120 × 740 × 1070 mm Find more here - / Contact us at -
technically efficient, ready to work – after full service motor power: 2.2 kW cutter diameter: 250 mm milling angle: +45° / 90° / -45° pneumatic profile clamping cooling and lubrication system compressed air preparation station
All-Fill Series 200 Twin Head Automatic Filling machine Find more here - / Contact us at -
Arburg 1 818 310 011-2V2 +B18 SN 112634 (861) Bosch 0 811 405 077 Hersteller: Arburg / Bosch Teilenummer: SN 112634 Leiterplatte Number: Bosch 0 811 405 077 Type: 1 818 310 011-2V2 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11062523
Arburg 4WRE10EA32-13/24Z4/M-425 Nr. 41447 Druckbegrenzungsventil Hersteller: Arburg Teilenummer: Nr. 41447 Type: 4WRE 10 EA32-13/24Z4/M-425 Druckbegrenzungsventil Anwendung: Ersatzteil für Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referee: 31094623
Arburg ARB 254 C SN 48.682 Eingangskarte (9) Dialogica Spritzgiessmaschine Hersteller: Arburg Teilenummer: SN 48.682 / SN 48682 Type: ARB 254 C Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referee: 11081523
Arburg ARB 270 G SN 42458 Leiterplatte Spritzgiessmaschine Ersatzteile Hersteller: Arburg Teilenummer: SN 42458 Leiterplatte Number: SN 42458 Type: ARB 270 g Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11061323
maximum number of results exceeded
please refine your search
