heidelberg 2 color used for sale

Technical details Number of Ink Cartridges:8 Color Channels:8 Number of printheads:16 Type of input current: Alternating current (AC) Total weight:1,410 kg

A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible.

Cutting speed: 80m/min, saw blade dimensions X/Y/Z: 2760mm/27mm/0.9mm, miter range: 60°/45°, working height: 950mm, cutting range X/Y: 280mm/150mm, max. cutting diameter: 230mm. Machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 350kg. Documentation available. An on site inspection is possible.

Offered is a rubber injection moulding machine of the company Klöckner DESMA, stroke volume 1600cm³, clamping force 2500kN, injection pressure 2078bar, machine weight approx. 11000kg. A visit on site is possible by arrangement.

A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.

Offered is a thermoform vacuum packaging machine / deep-drawing packaging machine from CFS. Air: 8bar / 500Nl/min, water: 2bar / 75l/min, weight approx. 2800kg. Inspection by arrangement possible.

Offered is a material tensile testing machine year 1984. Shear force tensile tests on reinforcing steel, max. tensile force 200kN, clamping device, external control unit. Viewing possible by appointment.

Year of Make: 1986 Clamping force: 40 kN Double station

Ref. no.: 18494 Manufacturer: ENGEL Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs Further information: ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production. Key Advantages: Tie-barless design → maximum mould accessibility SPEX special configuration → optimized for specific applications High precisi ...

• Bottle formats: Diameter approx. 20\endash 40 mm, height approx. 45\endash 70 mm, according to format set • Output approx. 6000 bottles/h • With format set for round bottles Ø 24 mm x length 52 mm • Feed hopper with lifting device, • Aligner for correct positioning of the bottle on the conveyor belt (e.g., filling machine) • 240V/50 Hz

TBA 19 200 SQ in excellent condition only 11000 Hrs

Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Weight: approx. 2300 kg

- Two-roller technology - 180° arrangement of wheels - Closed work area with coolant and lubricant equipment - Hydraulic roundabout centering device - Gearbox with oil circulation lubrication -Temperature Specifications: Workpiece diameter (max.): 360 mm Blank diameter (max.): 380 mm Workpiece length (max.): 600 mm Center width (max.): 1,340 mm Tip width (min.): 200 mm Tool holder DIN 55026: Gr. 11 Force per axis (transverse) (max.): 117 kN Axle force (longitudinal)/feed axle (max.): 140 kN Stroke (transverse): 190 mm Stroke (longitudinal): 690 mm Feed axis speed: (max.) 1.8 m/min Rapid traverse (longitudinal): 7.0 m/min Adjustment roller (axial): 0-20 mm Stroke ejector: 380 mm Ejector force: 26 kN Tailstock stroke: 800 mm Tailstock force: 5-19 kN Speeds (infinitely adjustable): 6-231-387 min-1 25-850-1,550 min-1 Main drive (DC motor): 33  ...

HYUNDAI WIA SE 2200 LMSA CNC Lathe GENERAL Project No.: 905806 Quantity: 1 pcs. Manufacturer: HYUNDAI Type: WIA SE 2200 LMSA Control: HYUNDAI WIA Fanuc i-Series Year of Make: 2021 Condition: Used machine Spindle in approx (hrs): 2149 Program run approx. (hrs.): 4106 Approx. (hrs): 8655 DESCRIPTION TURN Max. turning diameter 300 mm Max. turning length 508 mm Max. circumferential diameter over bed 600 mm Max. chuck diameter 210/125 mm Max. speed main spindle 4500 1/min Max. power main spindle at ED 10-40/100% 15/11 kW Spindle aperture main spindle 65 mm Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Max. speed sub-spindle 6000 1/min Max. power sub-spindle at ED 10-40/100% 7.5/3.7 kW Spindle Diffuser Sub-Spindle 32 mm Axes on the sub-spindle unit C/Z Blowing air through the sub-spindle Workpiece ejector in the sub-spind ...

Code: 0252 Brand: MA BREVETTI Model: JUNIOR 275 Pneumatic double mitre saw for 45° + 45° cuts at both ends, in frames and mouldings of any shape and kind Technical data: Blade diameter mm 275 F30 Max cutting capacity: Width 70 mm - Height 90 mm Production rate approx. 700/800 cuts Motors n° 2 - 2 Hp each - rpm 2800 Power supply V.380/50 Operating pressure 6 bar Suction port diameter 100 mm Overall dimensions mm 850 x 700 x 1400 mm Weight kg 265

An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement.

Double T beam / I 260 profile / crane rail 6 beams available, each approx. 10 meters long Price per carrier 500 Euro net Weight per carrier is approx. 500 kg I 260 Profiles with square solid material welded on it ( 4 x 3 cm ) Shipping available for an extra charge VAT can be declared

Hettich 22R Refrigerated Centrifuge Speed: n = 18,000 rpm / RCF 31,514 Temperature in the spin chamber: infinitely variable from -20°C to +40°C Running time 1-99 min, ∞ (continuous run), PULSE button (for short run in seconds) Dimensions (HxWxD): 278 x 333 x 620 mm Voltage: 220 - 240 Weight approx: 36 kg incl. rotor 1153 30x3 g Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

Brüel & Kjaer Integrated Sound Level Meter Type 2239 A Item Condition: Used Last calibration: 07/2020 More interfaces - new and used - can be found in our shop! International shipping costs on request!

General SKU392W1205 MakeSGL Carbon LocationBarneveld CEcheck TypeRS 77-1-295.40.1 Pressure Vacuum possiblecheck Working pressure shell6 Bar Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Mild steel Tube (Material)Diabon Surface100 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Diabon, Mild steel Heat exchangercheck Verticalcheck Notified bodyTUV Heating surface100m² Tube capacity800 l Max. temperature200°C Shell capacity980 l Shell diameter814 mm Max. temperature170°C Shell connectionsDN250 Cover connectionsDN300 Information No.41038060/1 Year of construction2015 Floorspace1,7x1,7 m Total height5,8 m Weight3600 kgShell and tube heat exchangersSGL CarbonHeat exchangers > Shell and tube heat exchangersBrand > SGL Carbon What you can expect from Foeth: -- Machine is in working condition -- A ...

Find more here - / Contact us at -

CONTROLS   electronic controls SIEMENS S7 300 PRESS DESIGN   drive system: eccentric / crank   openings in uprights: yes   number of suspensions: 2   table cushion: no   quick die change system: yes PRESS FORCES   total force (nominal): 250 to PRESS TABLE   table surface (left-right): 2000 mm   table surface (front-back): 1100 mm   height above floor level: 1105 mm   opening in bed (left-right): 1700 mm   opening in bed (front-back): 305 mm SLIDE   table surface (left-right): 2080 mm   table surface (front-back): 1000 mm   stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm   stroke adjustment: yes   stroke min.: 20 mm   stroke max.: 180 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 500 mm   distance between columns (H-frame): 2055 mm   passline opening (free passage in side columns):  ...

- 2 head drilling machine - floor model

pallet roller conveyor 2100-1040-900 RA2439 Pallet roller conveyor segment, continuous design length: 2100 mm Roller width (RB): 900 mm, Steel rolls Nominal/outer width (NB): 1040 mm roller distance / pitch 200 mm Overall height frame: 170/380 mm for pallet weight up to 1000 kg The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 0,75 kW Construction year: 1998 condition: good (used) Conveying length in mm: 2100 Nominal / outside width in mm: 1040 Roll width in mm: 900 Roll division in mm: 200 Driven: YES scope of delivery: including supports without side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen u ...

HAAS ST-20Y CNC lathe was built in 2022 in the United States by Haas Automation Inc. The machine has only worked for 119 hours to date and is like brand new. The HAAS ST-20Y is an excellent choice for the modern business. This is because it makes it possible to perform versatile 4-axis machining of the highest quality on any workpiece. All machining processes, i.e. milling, threading and drilling are performed by means of driven tools and a spindle with synchronised C axis. The 12-position BMT turret offers high productivity thanks to the larger contact area between tooling, toolholder and the turret itself. The operator, on the other hand, has at their disposal an advanced HAAS CNC control with a Visual Programming System (VPS), which significantly improves the daily operation of the machine. The VPS uses graphical templates to facilitate the creation of G-codes for even the most  ...

Sales stand/snack bar/container Year of manufacture not known incl. various equipment Dimensions: Length 3500mm Width 2400mm Height 2600mm Weight approx. 2500kg - The equipment and the container have not been cleaned or tested.

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

ID3646 Liedlbauer Bullcon 2001 year/Baujahr 2000 approx.  2.570 hours/hours 13 t Mobile impact crusher on wheels, crusher opening length 0.66 m, crusher opening width 0.62 m, crusher has been refurbished and serviced, ready for use, optionally 2 pallets of wear and spare parts available Mobile impact mill on wheels, crusher opening length 0.66 m, crusher opening width 0.62 m, crusher has been prepared and after-sales service has been carried out, condition ready for use, optional 2 pallets of wear and spare parts available

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fit ...

Emulsifier Karl Schnell Type: 250 Voltage: 400V / 50Hz Dimensions: 160x130x190cm

A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible with power.

Reference Num.: 4291 Brand: Xerox Type: Versant 280 Construction year: 2023 Impressions: 1 mio Available: directly Status: In production Location: Deutschland

A machining center with 10-station tool changer is offered. Table clamping surface X/Y: 600mm/300mm, travel X/Y/Z: approx. 420mm/300mm/250mm, spindle speed: 6000rpm. Tool holder: BT30. Control: Brother CNC-400, machine weight: approx. 2000kg, including manual. Inspection possible by appointment.

arm length: 1600 mm taper MK: 5 : Würfel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 315 mm bore: 89 mm dimensions of the machine ca.: m Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Originates from a European pharmaceutical leader in contract development and manufacturing (CDMO). Ready for Sale in Shropshire, England. Comes with: - Groninger DTE-600 rotary table - sorter with tray loader for glass bottles - Groninger ZSB-600 bottle sorter for PE bottles - Groninger DE-100 mobile bottle elevator - Groninger AAVK 300 automatic rotary bottle sterilising - cleaning unit - Monoblock filler and capper KFVG 201 with 3-head filling station This Groninger filling line was only occasionally used for short runs – therefore it is in outstanding condition with low hours. The line is primarily a used monoblock bottle filler and capper. Working Description Maximum output up to 60 BPM (depending on the container size and capping solution) with dose size up to 260 ml. The line is suitable for: • Fill ...

Key data: 1600 KW, 2300 kVA, 400 V

2G Containerized MWMM TCG 2020 V16 29.000 HOURS Year 2012 by 22.000 E60 done 400volt generator installation in the Netherlands

Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Max. upper bolster stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via toggle switch Bending rail in top condition Manual backgauge with spring fingers 4000 kg

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Aluminum chass ...

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Plexiglass enc ...

Reference Num.: 4264 Brand: Horizon Type: BQ-270 Construction year: 2003 Available: directly Status: Not in production Location: Deutschland

Continuous Pallet roller conveyor 2690-200-120 RA2444 Pallet roller conveyor segment, split Conveyor length (FL): 2690 mm Frame width (RB): 200/120 mm Roller spacing / pitch 75 mm Frame height: 90 mm Includes 2 brake rollers and two stoppers Stoppers only for cross loading, longitudinal loading requires disassembly Can also be loaded longitudinally with a pallet truck, but without the middle brake rollers Floor mounting possible without middle brake roller Lanes should be installed with a slope of 3-5% Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) Conveying length in mm: 2690 Nominal / outside width in mm: 200, 120 Roll division in mm: 75 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einf ...

swing diameter: 560 mm turning length: 800 mm control: C200-4D Siemens 840 D Main spindle:: spindle head: 8 DIN 55026/55021 ISO 7027/1 bar capacity: 90 mm spindle diameter in front bearing: 140 mm turning speed range - spindle: ~ 3.500 U/min drive capacity - spindle motor: 100% / 40%: 43 / 57 kW Torque: 275 / 363 Nm Indexing: 2,5 ° C-Axis: 0,001 ° turret:: Number of Turrets: 1 number of toolpositions: 12 pos. Spindle speed - driven tool stations: ~ 6.000 min -1 power capacity - driven tool-stations: 11 kW tool taper: 40 x 63 mm DIN 69880 Torque: 21,5 Nm travel -x axis: 300 mm travel -z axis: 800 mm rapid traverse: X/Z: 30 / 22,5 m/min feed power: X: 7.200 N feed power: Z: 9.000 N Tailstock:: dia. of quill: 65 mm Cone: SK 30 longitudinal travel: 800 mm rapid traverse: 10 m/min total power requirement: 51 kVA weight of the machine ca.: ca. 14 t dimensions of the machine ca.: 7,3 x 4,0 ...

Height=1.38 m, Overall length= 0.9 m, Overall width= 2.52 m, Net weight= 1374 kg,

Dimensions (L/W/H): 2394x990x3115 mm Weight: 0 kg Total power requirement: 2,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1480x760x1160 mm Weight: 180 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4000x2900x2100 mm Weight: 2500 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5000x2900x2100 mm Weight: 2900 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x3100x2200 mm Weight: 3650 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.