heidelberg 2 color used for sale

Straightening and welded plate cast steel-grey cast iron heavily ribbedheavyheavy straightening plateLength 2000 mmWidth 1500 mmThickness 125 mmBoard thickness approx. 40 mm continuousTable height 880 mm- Table base made of steel (self-made)Weight 1700 kgGood condition; used

Hydr. Notching machine with angle adjustment SIMASV type AV 220-6PAFabr. No. C1524 Year of construction 1996Knife length 220 mmMaterial thickness for steel 6 mmMaterial thickness for stainless steel 4 mmTable dimensions 950 x 790 mmTable height 940 mmMotor power 3 kWNet connection 400 volts, 50 Hz- Operation via tactile switch or foot switch- Adjustable notching angle from 30 to 140- Angle adjustment via 2 hand cranks for right and left- Hydraulic clamping for the adjustment blade- Electric foot switch- 2 pieces

TIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC)TIG Welding MachineFabr. No. 0507214 Year of construction 2007Power TIG 225 Amp. = 40% ED 180 Amp. = 60% ED 140 Amp. = 100% EDLight electrode 180 Amp. = 50% EDNew connection 400 Volt, 50 Hz. 16 Amp. Plug- DC welding machine- stepless power adjustment- 2 stroke and 4 stroke operation- HF ignition- Pulse welding mode- Rod electrode operating mode- Water cooled- 8 meter TIG hose package with hand torch-

Clamping plate, machine table with T-slots made of steelClamping tableClamping plate, clamping table, machine table SELF-MADEcan also be used as a straightening plate or welded plateTable surface: 2150 x 1040 mmOverall height: 200 mm- Top and bottom machined in parallel, planed surfaces- Table top L x W x H = 2150 x 1040 x 65 mm- Table top with some symmetrical holes Table top with M16 and M24 threaded holes, M16, M24, M16, M24 etc. Bore spacing in length: approx. 250 mm Bore spacing in width: approx. 255 / 165 /

E-chain hoist, electric chain hoist, crane KITO type WLL 240 ManuliftManufacturer: KITO Yamanashi JapanCode No. EDC 24SD Series No. 035884 Year of construction 2018Load capacity 240 kgHook travel 2 metersDistance suspension to load hook 850 mmLifting speed 3 to 12.9 m/min. mains connection 230 volts, 50 Hz- cylinder handle control with potentiometer for speed adjustment- safety- stroke limit switch- emergency stopweight 18 kgvery good condition; used

Electric walking forklift, pedestrian stacker JUNGHEINRICH type EJC 14G-115-290ZTSerien. No. 80582366 year of construction 1997Nominal load capacity 1400 kgNominal lifting height 2900 mmFork length 1150 mmTotal length 2000 mmTotal width 850 mmOverall height 1900 mmOperating voltage 24 volt- Duplex mast without free lift- 5721 operating hours read- Battery from year of construction 2014, type 24 V 3PzS 345 (24Volt / 345 Ah)- Automatic charger- New TÜV test UVV (surcharge 150,-- EUR net)Weight 1050 kggood condition; used

Electric walking forklifts, pedestrian stackers JUNGHEINRICH type EJC 214 series. No. 90334640 year of construction 2009Nominal load capacity 1400 kgNominal lifting height 3200 mmFork length 1150 mmTotal length 2000 mmTotal width 810 mmOverall height 2050 mmOperating voltage 24 volt- Duplex mast with 1600 mm free stroke- 4356 operating hours read- Battery from year of construction 2009, type 3PZS 375 (24Volt/ 375 Ah)- Automatic charger Jungheinrich 24 Volt, 40 Ampere- TÜV test UVV until 11.2025Weight 1200 kggood condition; used

Electric walking forklift, low-floor pallet truck, ant, pedestrian stacker JUNGHEINRICH type EJE 22G-20-235-56 (L)Masch. No.: 80405795 year of construction 1996Nominal load capacity: 2200 kgLifting height: 200 mmFork length: 2350 mmOperating voltage: 24 VoltTotal length: 3050 mmTotal width: 690 mmHeight with drawbar: 1350 mm- Battery from year of construction 2007, Type 2 EPZS 230 (24 Volt, 230 AH)- Battery automatic charger- 8890 operating hours read. Weight approx. 560 kggood condition; used

Key data: 4000 kN, 80 mm

Machine + Viper Robot 12

Mitsubishi MAF 210/150A Year: 1977 Table Size: 3000 × 3000 mm | Load Capacity: 60,000 kg Axis Travel: X: 14,000 mm | Y: 4500 mm | Z: 900 mm Spindle: Ø164 mm | 4–3460 rpm | 37/45 kW DC motor Control: ISO/EIA compatible | 5-axis interpolation | M-NUX115 DRO Accuracy: ±0.015 mm/m (X/Y), Repeatability ±0.01 mm Included Accessories: • Tool locking (5 pull studs) • Digital readout system • NC controller with startup components • Setup/leveling blocks • Maintenance toolkit • Protective covers Optional Add-ons (upon request): • Chip conveyor and coolant system • Rotary/angled fixturing • Pendant control • Bellows or floor plate systems • Special tooling packages Utilities & Installation: • Power: AC 220V (standard) • Air: 2–7 kg/cm² at 100 L/min • Installation space & foundation info on request

Bosch (Syntegon) GKF 2600 intermittent capsule filling and closing machine for the filling of powder, filling station at station no. 5 for micro-dosing (DPI or pure API), capsule body scan at station no. 3, pneumatic and contactless capsule top scan at station no. 4, integrated gravimetric random sampling inspection for statistical gross fill weight control (position 3), additional integrated gravimetric random sampling for statistical net weight control of the filled capsule (gross – tare = net), 100% net weight determination by means of NWDS (Net Weight Detection System), powder hopper with a volume of 17 litres, empty capsule hopper with a volume of 15 litres, includes format parts for capsule size 3, with the correct format parts suitable for capsule sizes 00-5, capacity up to 156,600 capsules per hour, automatic trouble shooting (ASB) with In-Process Control (IPC), electronic reco ...

a KM-200-1000 machine with removal robot built in 2006 for sale. The machine is in neat condition and serviced by Krauss Maffei.

Max. saw blade diameter: 520 mm Cutting height: 200 mm at 90°, 140 mm at 45° Cutting length: 420 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Pneumatic material tensioners Minimum quantity spraying device Powerful 5 KW motor

Brand & Model: SANDRETTO Serie NS - 230 T Reference: NS 860/2300 Condition: Very good Technical Specifications: Clamping force: 230 T / 2300 KN Tie bar spacing: 585 x 585 mm Platen dimensions: 860 x 860 mm Mold thickness (Min/Max): 210 - 630 mm Opening stroke: 580 mm Injection volume: 475 cm³ Injection pressure: 1876 bar Screw diameter: 50 mm L/D ratio: 20 Dimensions & Weight: Weight: 10 500 kg

A complete Rösler mass finishing machine is available. 1) Central mass finishing machine (centrifugal system) Rösler RotoMatic R 280/24 SE, year of construction: 2008, connected load: 18kW, weight: approx. 7500kg. 2) Rotary dryer Rösler RT 550 EURO-So., year of construction: 2008, connected load: 8.9kW, weight: approx. 1050kg. 3) Rösler R 290/4500 FB/T conveyor belt, year of manufacture: 2008, belt width: 290mm, belt length: 4900mm, connected load: 0.55kW, weight: approx. 430kg. 4) Buffer chute Rösler R 16/6/4 PR, year of construction: 2008, connected load: 4kW, weight: approx. 570kg. 5) Feeding unit Rösler BE 200 K-So., year of manufacture: 2008, connected load: 1.1kW, weight: approx. 200kg. Documentation available. On-site inspection is possible.

turning diameter: 500 mm turning length: 1000 mm control: Mazatrol Smooth G number of spindle speeds: 5000 U/min spindle motor: 11/7,5 kW axis stroke (X,Y,Z): 450, 200, 960 mm travel -w axis: 950 mm b-axis: -30 / +210 ° c-axis: 360, 0,0001 ° bar material dia.: 65 mm milling spindle: spindle bore: 76 mm spindle turning speed range: 12000 U/min spindle motor: 7,5 / 5,5 kW tool taper: HSK A 63 rapid travel x/y/z: 40000 mm/min weight of the machine ca.: 9.5 t dimensions of the machine ca.: 3900 x 2600 x 2400 mm equipped with: - CNC control Mazak Smooth G - Main and counter spindle - milling spindle - Y-axis - Tool holder: HSK A 63 - Tool magazine: 72 places - Tool Eye - Mazak monitoring system B (RMP 60) - Coolant and compressed air (1.5 MPA) - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible.

turning length: 2500 mm control: Sinumerik 840 D spindle head: A 11 tool numbers: 48 swing diameter over bed slide: 750 mm swing over bed: 780 mm c-axis: 0,1-30 1/min diameter of quill: 160 mm taper bore: MK 5 tool length - max.: 500 mm weight of tools max.: 15 kg weight of the machine ca.: 27 t dimensions of the machine ca.: 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm) The data for this ad was crea ...

A right-sided Hebrock edge banding machine is available. Workpiece thickness range: 10mm-50mm, min. workpiece width: 70mm, min. workpiece length: 250mm, edge thickness (roll material): 0.5mm-5mm, max. edge height: 55mm, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 3000mm/1500mm/1300mm, weight: approx. 700kg. On-site inspection is possible.

SANDRETTO serie 8 790/240 Clamping force : 200 T Distance between tie bar : 570 x 570 mm Platen dimensions : 860 x 860 mm Mould thickness min / max : 210 - 730 mm Opening strocke : 630 mm Injectable volume : 546 cm3 Pressure on material : 1450 bars Screw diameter : 55 mm Weight : 11 500 kg Dimensions : 7,68 x 2,35 x 1,78 m

Radial drill Manufacturer: Valmer Type: TR 80/2500 SP Year of Make: 2006 Table dimensions: 1,000 x 800 x 560 mm Drilling diameter max.: 80 mm Max. tap diameter: 42 mm Max. spindle axle/column distance: 2,500 mm Max. distance between spindle axle and column: 500 mm Head movement horizontally: 2,000 mm Max. distance between spindle nose and working surface: 2,000 mm Distance between spindle nose and working surface min.: 550 mm Spindle stroke: 450 mm Morse taper: MT 6 Power: 7.5 kW Machine dimensions: 3,730 x 1,400 x 3,825 mm Weight: 11,000 kg

Pressing Force max.: 2000 Kn, Withdrawal force max.: 1500 Kn, Supporting force in pressing position max.: 1200 Kn, Die return force max.: 50 Kn, Upper punch stroke: 220 mm, Upper punch adjusting travel: 200 mm, Number of strokes: 5-18 1/min, Filling height max.: 180 mm, Pressing travel max.: 90 mm, Withdrawal travel max.: 90 mm, Top pressing travel max: 18 mm, Upper punch pneumatic preload max.: 60 mm, Compressed air supply , Air consumption, Intake air aprox.: 140 1/min, Total connected load aprox.: 26,0 Kw, Width aprox.: 2350 mm, Depth aprox.: 3500 mm, Height aprox.: 5900 mm, Weight of the press aprox.: 19.900 Kg, Press housing: 260 l (gear oil), Workplace-related sound: 78 dB (A)

Reference Num.: 4206 Brand: Kodak Type: NexPress 2500 Construction year: 2017 Impressions: 22 mio Available: directly Status: Not in production Location: Deutschland

Transnorm belt conveyor GF 25000-1000-900 RA2416 Technical data: Conveyor length (NL): 25000 mm frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 25000 Nominal / outside width in mm: 1000 Belt width in mm: 900 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 2,2 Conveyor speed m / s: 0,2 scope of d ...

Three heating units Kleindienst are available. 1) Kleindienst 3-294, year of manufacture: 1994, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar, connected load: 4.9kW. 2) Kleindienst 3-174, year of manufacture: 1992, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar. 3) Kleindienst 3-1194, year of manufacture: 1994, connected load: 0.1kW. An on-site inspection is possible.

Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible.

An AFS printing, laminating and coating system (corona pre-treatment) is available. Roller width: 2700mm, electrode width: 2500mm, max. mechanical speed: 250m/min, max. generator output: 6kW, operating mode: 1- and 5-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: both sides. Documentation available. On-site inspection is possible.

Ruwac Industrial Vacuum Cleaner DS 2520 M-B1 with Extraction Arm 5.5KW

Inv. Num. : 8552 Type: TMM-250 M1 Producer: Takisawa Created: 2005 Parameters: Control system: FANUC 180i Max. turning diameter: 350 mm Maximum spindle speed: 4000 1/min Bar diameter: 50.8/76.2 mm Length: 4745 mm Width: 2932 mm Height: 2250 mm Weight: 8500 kg Equipment: 2 spindles and 2 heads with driven tools

ANGER HCP 203 Production GENERAL Project No.: 905739 Quantity: 2 pcs. Manufacturer: ANGER Type: HCP 203 Control: Siemens 840 D Year of manufacture: 2005/2013 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION There are 2 production lines available. Each production line consists of three ANGER multi-spindle machining centers, each of which is connected to a KUKA robot. The loading and unloading of the EWAB conveyor belt is located at the back of the machines. ANGER (1) - 5-axis: 4 vertical milling and drilling spindles at the bottom, 4 vertical milling and drilling spindles at the top, touch probe at the top, 4 horizontal milling and drilling spindles at the left. Workpiece carrier with three linear axes and two rotation axes. ANGER (2) - 5-axis: 4 vertical milling and drilling spindles at the bottom, 6 vertical milling and drilling spindl ...

A CNC image processing and measuring device Mitutoyo is available. Travel X/Y/Z: 200mm/250mm/100mm, accuracy: 5µm, resolution: 0.5µm, travel speed: 80mm/s, acceleration: 250mm/s², glass table dimensions X/Y: 269mm/311mm, max. workpiece weight: 10kg, weight: approx. 70kg, control: QSPAK Version 3.1. Documentation available. An on-site inspection is possible.

1 piece new, S 80/24D, for PUR 1 piece little used, S 80/24D, with maddock and mixed part

Rheon V4 Stress Free Divider Type VX 202 -400 Year of construction: 2011 Output approx. 400kg /h Dough belt width 130-150mm Product weight approx. 50 -1,250g with single and double-row guillotine with spreading station with double-row weighing and outfeed belts with star cutter lubrication with 2 flours with digital control with funnel for approx. 50kg dough - overhauled and cleaned - Tapes, funnel mats, hoses, various bearings, etc. renewed - Availability: approx. 6-8 weeks after order

Manufacturer: Mitutoyo Model: QS-250Z Year of Manufacture: 2001 Technical Data: - Measuring Range: X= 200 mm, Y= 250 mm, Z= 100 mm - Accuracy: 5 μm / Resolution: 0.5 μm - Image Capture Unit: 1/3" CCD color camera - Max. Permissible Length Measurement Error: - XY: (2.5 + 0.006L) μm (L = measuring length in mm) - Z: (5 + 0.006L) μm (L = measuring length in mm) - Travel Speed: Max. 80 mm/s - Acceleration: Max. 250 mm/s² - Glass Table Dimensions: 269 x 311 mm - Lighting: - Transmitted light: 12V / 30W Halogen - Coaxial incident light: 12V / 50W Halogen - Fiber optic ring light: 12V / 100W Halogen - Software: QSPAK Version 3.1 - Operating System: Windows 10 Pro - Max. Workpiece Weight: 10 kg - Machine Weight: 76 kg Additional Equipment: - Joystick Box Machine Capabilities: - External measurement - Internal measurement - Distance measurement - Parallelism - Angularity Last calibr ...

Offer 25286 Specifications: - Saw blade dimensions 400 x 35 x 2.0 mm - Cutting range - 90° round approx. 252 mm - flat approx. 250 x 160 mm - Square approx. 210 x 210 mm - 45° round approx. 160 mm - Flat approx. 150 x 150 mm - Material replenishment machine - max. opening width of the vise 265 mm - mitre-adjustable vise - Coolant device - Drive 400 V / 0.65 / 1.6 kW - Space requirement approx. W 1400 x H 950 x D 1700 mm - Weight approx. 600 kg

Automatic cover feeder 1 clamp Milling and roughening station Hotmelt –EVA gluing unit with dust extractor LCD touch Screen DV-270 delivery conveyor (option) Book size : 320 x 320 (12.6”x12.6”) mm – 135 x 105 mm (5,4”x4.2”) Book thickness : 1-50 mm (0.04”- 2”) Speed : 500 c/hr

Two color pad printer GP 2002. The printer is intended for larger quantity jobs; closed system with foot pedal switch. Diameter of inside cup 6 cm. Format :215x100 mm. Available immediately.

AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(), 30kW - Japanese standard Pgsc N D D Hou Dxb Tjxop Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Beck Wand 1000/2000 Extraction Wall Extraction wall Type: Beck Wand 1000/2000 Extraction wall made of sheet steel, with 5 suction slots made of perforated sheet metal evenly distributed. For connection to a central extraction system via a suction nozzle at the top center of the extraction wall. Cleaning opening can be unscrewed at the bottom of the front of the wall. Uses: Extraction of process air during grinding and milling Extraction of gases and light dust Extraction of powder mix or other stationary dust-forming processes Width: 1000 mm Height: 2000 mm + 100 mm nozzle Depth: 300 mm Suction nozzle: NW 250 top center Recommended extraction capacity: 3000 m3/h Paintwork: RAL 5018, RAL 7032 Weight: approx. 75 kg Manufacturer's price: 2970,-€ More items - new and used - can be found in our shop! International shipping costs on request!

Inv. Num. : 8570 Type: SU 50 A/2000 Producer: TOS Generated: Parameters: Maximum turning length: 2000 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter via support: 250 mm Weight: 3260 kg Equipment: Digital measurement

for sale 2 MWM year 2010 hours 42 000 complete container installations

The Dorst DK 250 is a robust used powder compaction press engineered by DORST, offering a substantial pressing force of up to 2500 kN. It supports operations with a maximum withdrawal force of 150 kN and a supporting force in the pressing position reaching 120 kN. Designed for precision, this model includes a 220 mm upper punch stroke with an adjustable travel of 120 mm. The press accommodates a pressing travel and withdrawal travel, each up to 50 mm, making it versatile for various pressing tasks. Operational performance ranges from 6 to 25 strokes per minute, and it provides a filling height of up to 100 mm. The Dorst DK 250 is efficient, consuming approximately 500 liters of air per minute and demanding a connected load of around 60.0 kW. Its dimensions, at 2500 mm in width, 1900 mm in depth, and 4800 mm in height, alongside a weight of approximately 18,500 kg, underscore its solid co ...

Test force: -- kN Dimensions (HxWxD): -- mm weight: 76 kg Condition: Used, ready for use Specification: Mitutoyo image processing and profile measuring device Type: Quick Scope QS-250Z 1J - Used The Quick Scope QS-250Z is used to measure: - Outer diameter - Inner diameter - Distance measurement - Parallelism - Angularity The device was used in quality assurance in a single-shift operation. Technical data: - Measuring range: X = 200 mm, Y = 250 mm, Z = 100 mm - Accuracy: 5 µ / resolution 0.5 µm - Image capture unit: 1/3 CCD color camera - Travel speed max.: 80 mm/s - Acceleration max.: 250 mm/s² - Table dimensions: 269 x 311 mm Lighting: - Transmitted light: 12V / 30W halogen - Coaxial incident light: 12V / 50W halogen - Fiber optic ring light: 12V / 100W halogen Software: QSPAK Version 3.1 Operating system: Win10pro Workpiece weight: max. 10 kg Weight:  ...