134,061 used machines on RESALE, but how to find them? Machine Search
Very large linear weigher for high volume weighing with 1 head. - Specifications: weighing range: 5-25kg | max. speed of the machine in neutral: 10 cycles/minute | accuracy: 0.2% (depending on product) | power: 2.0kW | machine dimensions: L3000xW2800xH4200mm (including 1400mm standing frame/can be customized) | weight: 1500kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Linear weigher with spiral conveyor for sliced or pulled meat such as gyros, kebabs, pulled pork, or also minced meat, fresh/humid fruits, fresh vegetables, etc. Weighing range: 10-3000g. 2 weighing heads with load cells allow fast and precision weighing. - Specifications: capacity weighing hopper: 5 L | number of weighing heads: 2 | weighing range: 10-3000g | accuracy: +/- 1-10g | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 1-phase | touch screen control | stainless steel version SUS 304. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times f ...
Weighing unit with 24 weighing heads for very precise weighing, with 1 Liter volume each. Special design for weighing 4 or 6 different products simultaneously and then merging them or to weigh one product in high speed. Optional for extra charge: CAN bus protocol for higher speed. - Specifications: max. speed of the machine in neutral: 50 cycles/minute (with 4 - 6 products simultaneously) | weight range per product for 6 products: 1-200g | accuracy +/- 0.5-1.5g | PLC controlled, operating via 10 Touchscreen (operation menu in English) | stainless steel 304 | IP65 | 220V/2,5kW, 15A | machine dimensions: L2630xW1700xH1815mm | weight: 1200kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task ...
Weighing unit with 24 (2x12) weighing heads for very precise weigh checking, with 1.0-Liter volume each. Special design to mix two different products or to weigh one product in high speed - Specifications: max. speed of the machine in neutral: 150 (or 2x60) cycles/minute | weighing range: 10-1000g | accuracy: +/-0.1-2.0g | touchscreen (large version) operation | stainless steel | 220V, 3kW | L2176xW1456xH1483 | 1000/1100kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - ...
Weighing unit with 24 weighing heads for very precise weighing, with 0.8 Liter volume each. Special design to mix up to four different products or to weigh one product in high speed. - Specifications: max. speed of the machine in neutral: 220 cycles/minute (when one product is processed, and depending on product). Weighing range 2-500g, Accuracy +/-1g, 10.4 inch Touchscreen (operation menu in three languages). - Stainless steel, IP64 (upgrade to IP65 possible, for additional costs) 220V/4kW, L2136xW1456xH1433mm, 1100kg. Deviations from the sample image are possible. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from sto ...
Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade plastic tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/minu ...
Fully automatic twist-off lid capping machine for bottles and containers. The sealing machine is equipped with a vacuum device for a longer shelf life of your products. With two twist-off heads the rotary capper closes the lids quickly with 5-20 NM. Conveyor belts (infeed and outfeed of containers/bottles) for integration into the packaging line are included. - Specifications max. speed of the machine in neutral: 17 cycles/minute (corresponds to max. 35 bottles/container per minute) | conveyor belt speed can be adjusted accordingly: 0-15m/min | bottle diameter: two ranges: a) 30-85mm, b) 80-150mm | lid diameter: customized | adjustable height of the twist off heads: 50-180mm | vacuum degree: -85kpa | materials used: mainly stainless steel 304 | protective screens and links of the conveyor belt are made of plastic | machine dimensions: L1800xW660xH1700mm | weight: 650kg. The machine phot ...
Automatic liquid filling and capping system. Suitable for various liquids and oils from the food industry (water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as from non-food (perfumes, cosmetic oils, detergents, etc.). The liquid filling system has 2 filling heads moving in vertical and horizontal direction, which allow continuous filling and thus a higher number of cycles. Automatic detection of the position of the bottles and of the neck diameter of the lid. The Advantage is less adjustment work and sensor settings (within a certain range) have to be carried out. The change to different bottle dimensions is considerably facilitated, which ultimately results in lower machine downtime due to the time savings. Easy adjustment to different bottle width and height without the need for additional format sets. After filling, the bottles are conveyed by a conveyor belt to the au ...
Automatic weighing unit for granulate like products (chemicals, food, sugar, coffe, detergents, etc.) into bottles, cans or similar. Including hopper, vibrating feeder, weighing unit, housing to minimize dust, rack and conveyor. - Specifications: stainless steel version (SS304) | 2 head weigher each with weighing range of 10-2000g | Accuracy:
Economical blister machine with a quick format change unit for more flexibility. Universal feeder for handling of almost all types such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes. Adjustable sealing pressure for different product requirements. The machine is additionally equipped with a film waste material trimming cutting device which allows production runs of approximately 90 minutes. Integrated camera inspection systems (pinhole detector, BASLER color camera) automatically eject defective blisters and ensure the quality of the blister packs. Two holding devices for two blister film rolls and the integrated blister film splicer increase efficiency during material changeover. The length of the final blister is adjustable by software. Including water chiller system, 1 x aluminum format set with dedicated feeder, aluminum/PVC forma ...
Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed). Equipped with: quick change former assembly | SIEMENS PLC | WEINVIEW touch screen | eye mark sensor for seal/cutting position | servo driven sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 60 cycles/min | bag sizes: L(60-500)xW(120-410)mm (double film pulling L = 800mm), gusseted stand-up pouches: L(60-500)xW(100-350)xD(40-150)mm (double film pulling L = 800mm) | suitable film width: 260-850mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 8.0kW | air pressure: 0.7MPa | compressed air consumption: 0.25-0.40m?/min | weight: 770kg. Please note that our new prices are often bel ...
Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | pneumatic sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 40 cycles/min | bag sizes: L(40-600)xW(115-400)mm, (double film pulling possible for longer bags) | suitable film width: 200-820mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 4.2kW | air pressure: 0.2-0.8MPa | compressed air consumption: 1.0m?/min | dimensions (LxWxH): 238516301950mm | weight: 980kg. Please note tha ...
X-ray detector for food and other (e.g. medical, chemical, textile) products in packaging (non-metallic or metallic, even cans), flexible setting of detector head, suitable for detecting small products and specials applications. With protective device. - Specifications: detecting speed: 0.17-0.46m/sec | detecting accuracy: FE from ? 0.8mm, SUS from ? 0.8mm | tunnel size WxH: 230x120mm | max. passing size WxH: 230x120mm | power: 220V/1kW | dimensions and weight: L1230xW795xH1600mm, 800/900kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
High-speed Metal Detector for the use in high-speed production lines, stainless steel framework, touch screen. - Specifications: detecting speed 0.2-1.7m/sec | detecting accuracy: FE from ? 0.8mm, SUS from ? 1.8mm | tunnel size WxH: 300x120mm | max. passing size WxH: 250x80mm | power: 220V/0.3kW, 50Hz/60Hz | dimensions and weight: L1505xW600xH890mm, 150/250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 50kg | detecting speed: 0.5m/sec | detecting accuracy: FE from ? 1.5mm, SUS from ? 2.5mm | tunnel size WxH: 450x250mm | max. passing size WxH: 410x210mm | power: 220V/0.45kW, 50Hz/60Hz | dimensions and weight: L1800xW800xH950mm, 180/280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 5kg | detecting speed: 0.5m/sec | detecting accuracy: FE from ? 1.5mm, SUS from ? 2.0mm | tunnel size WxH: 125x250mm | max. passing size WxH: 100x215mm | power: 220V/0.3kW, 50Hz/60Hz | dimensions and weight: L1627xW528xH1420mm, 110/210kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Vertical weighing and filling system for pre-made large bags/sacks. Suitable for granular products such as seeds, pet food, wood pellets etc. The system includes product feed, automatic weighing unit, conveyor belt and sealing OR sewing module. The pre-made bags are manually clamped into the pneumatic clamp support by hand. The product is dosed by weight and filled into the bag. The bag is then by conveyor belt to the sealing or sewing module for sealing or sewing. - Specifications: Weight range: up to max. 25kg | max. speed of the machine in neutral: 200 bags/hour | accuracy: ?0.2% FS | power: AC 220V/380V, 50Hz, 2kW | compressed air: 6bar, 0.17 m? | product contact parts are made of AISI 304 stainless steel | dimensions of the system depend on the final layout, can be customized. That machine/system is available in different versions for different packaging sizes and with different pac ...
Vertical filling machine for liquids into 3-side-seal- or pillow-bags. Including liquid dosing device (for high viscosity liquids). Twin filling layout for high capacity. Can be linked to CIP system to have an automatic circulating system to guarantee clean feeding pipes. The packaging material is sterilized by UV lights inside the machine to assure a clean environment for the packaging material and the liquid product. Contamination of the liquid product can be reduced during the packaging process to have a longer shelf life. - Specifications: max. speed of the machine in neutral: 100 cycles/minute | suitable for volumes from 200-1000ml | accuracy: +/- 1.5% | max. film width: 320mm | bag width: 100-160mm (depending on pouch type) | bag length: 95-165mm | 0.7m?, 6bar | 380V, 3.9kW | machine dimensions: 1700x1100x2950mm | weight: 720kg. That machine/system is available in different version ...
Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packagin ...
Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that o ...
Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note tha ...
Sidesleever for thick PE films, that can do full wrapping of the product. All 4 sides are properly sealed. XL version for large products, inclusive suitable shrink tunnel. Suitable for dust protection and transport purposes. Low cost packaging solution even for large products of up to W+H
Sleeve packer/film band roller for film wrapping of large products. Including shrinking tunnel. Full automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications: 380V, 21kW | 0.6m?, 6.0bar | max. speed of the machine in neutral: 10 cycles/min | max. product dimensions (mm): W750xH300 | machine dimensions (mm): L5060xW1150xH2000 | weight (net/gross): 1200/1400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Automatic Sleeve Labelling Machine with a capacity of up to 400 cycles per minute. Shrink tunnel included. Stainless steel version (SS304), servo motor driven cutter, no-bottle-no-label, label feeding device with a feeding speed of up to 90m/min for fast and precise production. Brusher devices to help fixing the label in the right position, bottle position fixing device, adjustment to lift he machine according to the bottle size. MITSUBISHI PLC, WEINVIEW touchscreen. - Specifications: max. speed of the machine in neutral: 100 cycles/minute | label ?: 28-50 or 50-95 or 95-125mm | label length: 35-300mm | label thickness: 0.035-0.08mm | power: 2kW | machine dimensions: L6400xW1100xH2600mm | weight: 1500kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available i ...
Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 1-200g | filling hopper capacity: 15 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 1500-2500kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 60L/min | power supply: 220V | power consumption: 7.5kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 200-600kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 15L/min | power supply: 220V | power consumption: 2.2kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 50-200kg/h (with max. 5m conveying distance) | housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 15L/min | power supply: 220V | power consumption: 1.5kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Checkweigher to check if product meets target weight. 6 sorting stations with 2 way reject device, each. - Specifications: belt width: 220mm | weight range: 5-1000g | accuracy: +/- 0.3-3g | max. speed of the machine in neutral: 60 cycles/minute | power: 220V, 1-phase | machine dimensions (mm) approx.: L2459xW684xH780(weighing belt). Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
High speed weigh checker with max. speed of 150 cycles/minute in neutral. Stainless steel (SS304) version, Memory Card parameter storage (up to 100 parameters), touch screen operation. Suitable to supply corrective signal to connected equipment. - Specifications: accuracy: +/- 0.5-1.5g | belt size: L450xW220mm | minimum scale: 0.1g | belt speed: 5-150m/min | power: 220V, 250W. Optional devices: blower device, T-push device, two way swing arm, slide down device. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Checkweigher with reject device to check if product meets target weight. New version with data readout. - Specifications: belt width: 220mm | measuring area (weighing belt): L500xW220mm | weight range: 10-1000g | accuracy: +/- 0.1-3g | max. speed of the machine in neutral: 80 cycles/minute | power: 0.3kW, 220V, 1-phase | machine dimensions (mm) approx.: L2269xW574xH780(weighing belt) | weight: 140kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Weigh checker with reject device to check if product meets target weight. - Specifications: belt width: 220mm | weight range: 5-999g | accuracy: +/- 1.5g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Weigh checker with reject device to check if product meets target weight. - Specifications: belt width: 220mm | weight range: 1-10kg | accuracy: +/- 3.5g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
X-ray inspection system especially for tin cans and plastic containers, jars. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 200 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 150 kVp, 7.5 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: vertical scan | conveyor belt height: 900 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ?60 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L2000xW1300xH2060 mm | weight: 650 kg. Please note that our new prices are often below the usual used pric ...
X-ray inspection system for small single bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 250 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 80 kVp, 1.25 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: horizontal scan | conveyor belt height: 850 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ? 100 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L800xW860xH1580 mm | weight: 270 kg. Please note that our new prices are often below the usual used prices. Please feel free t ...
X-ray inspection system for small single bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 270 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 80 kVp, 1.25 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: horizontal scan | conveyor belt height: 850 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ? 100 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L900xW685xH1680 mm | weight: 300 kg. Please note that our new prices are often below the usual used prices. Please feel free t ...
Granulating sieve Manufacturer: Frewitt Type: MGI - 205 Capacity: up to 1,000 kg/h (depending on the product) Motor power 0.75 kW-1.0 kW Bearings dust-tight inside and out, rotor speed infinitely adjustable The machine is suitable for dry granulation, screening, crushing, grinding, wet granulation. Rotor speed infinitely adjustable, easy cleaning Seven sieve inserts available (table is not included), documents available
Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: Approximately 35 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm
Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light, saw diameter: 80-840 mm, Bore diameter: from 10 mm, sheet thickness: < 8 mm, Tooth pitch: 6 - 120 mm, Cutting length:
Manufacturer: Engel Model: Victory 1800/ 260 Year of Manufacture: 2008 Specifications: - Clamping Force: 260 tons - Screw Diameter: 60 mm - Operating Hours: 88,266 Find more here - / Contact us at -
MUNK Günzburger Steigtechnik 303406 Aluminum access ladder machine crossing with platform (bridge) 1900-750-2500 RA2414 Technical data: Manufacturer: Munk Günzburger Steigtechnik Type: machine crossing with pedestal Condition: very good (used) Total size: 1900-750-2500 mm (WxDxH incl. handrail) step dimensions: 85 x 600 x 45 mm step/tread height: 230 mm platform dimensions: 800 x 650 mm Platform height: 1350 mm bottom edge 1420 top edge Steps: 6 (5 steps + platform on each side) Maximum working height: 3450 mm maximum load: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag ...
Inv. Num. : 8438 Type: AF-200-75 Producer: Arisa Generated: Parameters: Maximum retraction speed: 200 t Top table length: 950 mm Top table width: 750 mm Maximum number of strokes: 20 1/min Ram stroke: 250 mm
Filter area: 20 m² (20 filters, approx. 460 mm x 1100 mm) Volume flow: 1500 m³/h Compressed air pressure: 6 bar Filter resistance: 8 mbar Total length: approx. 4300 mm Total width: approx. 2400 mm Diameter: approx. 1800 mm Tube diameter: approx. 125 mm each
table length: 3000 mm table width: 2000 mm table load: 200 t total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: / mm plate thickness: / mm distance between columns: / mm total power requirement: kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
degree: 700 Grad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 75 mm total power requirement: 14 kW weight of the machine ca.: 10 t - capacity at boring: 75 mm ( St 45 ) - spindle diam. 115 mm - taper in spindle: 110 mm/ Morse 6 - distance column to drilling spindel: 500.. . 2000 mm - vertical adjustment of arm: max. 1100 mm - distance column to drilling spindel: 450.. 2000 mm - drilling depth: 450 mm - range of speeds: 12,5 ...1600 U/ min // rpm - feed: 0,63 ... 3,15 mm / U - angle of arm: 360 ° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 250 t throat: 400 mm stroke: 30...140 mm table-size: 1000 x 750 mm hole in the table: 360 x 400 mm ram surface: 630 x 500 mm ram adjustment: 110 mm total power requirement: 18 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 3500 mm plate depth: 2000 mm plate height: 360 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
