134,061 used machines on RESALE, but how to find them? Machine Search
cutting diameter: 220 mm saw band length: 2450 mm cutting width: 250 mm cutting speed: 40 / 80 m/min dimensions of saw-band: 2450 x 27 x 0,9 mm : 100 mm : 90 mm : 90 x 90 mm : 160 mm : 160 x 110 mm : 250 x 190 mm total power requirement: 0,75 / 1,1 kW table height: 925 mm weight of the machine ca.: 218 kg dimensions of the machine ca.: 1300 x 700 x 1530 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 2000 mm Working width: 600 mm Wheel width: 600 mm roll diameter: 90 mm number of rolls: 8 Stck. work height max.: 660 - 815 mm Colour: blau / rot weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...
: 2000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: 60 mm number of rolls: 8 Stck. work height max.: 810 - 910 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 28 mm wall strength: 2 mm bending radius min.: 90 ° Control: 3D TubeSoft Slim total power requirement: 3,5 kW weight of the machine ca.: - kg dimensions of the machine ca.: - mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
carrying capacity: 250 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...
plate thickness: 6 mm pressure: 12 t cutting range: Breite x Länge 200 mm no. of strokes: 15 Hub/min cutting angle: 30 - 140 ° total power requirement: 4 kW weight of the machine ca.: 1,02 t dimensions of the machine ca.: 1065 x 900 x 1210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 255 mm saw band length: 2765 x 27 x 0,9 mm table height: 950 mm : 18-110 m/min : 255 mm capacity 90 degrees: square: 240 mm capacity 90 degrees: flat: 300 x 180 mm capacity 45 degrees: round: 210 mm capacity 45 degrees: square: 190 mm capacity 45 degrees: flat: 200 x 160 mm capacity 60 degrees: round: 135 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 130 x 100 mm capacity 45 degrees: round: rechts 180 mm capacity 45 degrees: square: rechts 160 mm capacity 45 degrees: flat: rechts 180 x 100 mm : 1,5/1,8 kW : 350 kg : 1700 x 900 x 2000 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system ...
x-travel: 2000 mm y-travel: 920 mm z-travel: 900 mm table surface area: 2200 x 750 mm table load: 3 t number of T-slots: 6 T - slots - width: 18 mm T - slots distance: 120 mm spindle taper: ISO 50 DIN 69871-B spindle speed max.: 3000 U/min transmission ratio: 1 speeds infinitely variable range 1: 60 - 3000 U/min weight of the machine ca.: 21,6 t feeds longditudinal/cross/vertical: 0 - 5000 mm/min rapid traverse: 15000 mm/min total power requirement: 38 kw weight of the machine ca.: 11 t Pull studs DIN69872-B | IKZ Hours: Control on: 43036 h Machine on: 41311 h Program run 13894 h The machine is already dismantled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 1200 kg workpiece diameter: 20 - 800 mm total power requirement: 0,75 kW traversing speed: 80 - 1600 mm/min weight of the machine ca.: 56 kg range L-W-H: 520 x 470 x 390 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t stroke: 400 mm table surface area: Arbeitsbreite 1300 mm pressure: 243 bar oil volume: 64 dm³ ajustment speed: 5,73 mm/sec work speed: 1,84 mm/sec return speed: 7,08 mm/sec total power requirement: 3,0 kW weight of the machine ca.: 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: Mitsubishi Area of application: Production of chassis components made of cast iron in batches Nodular graphite in one clamping position, production of large series or largerones. Quantities, current cycle time
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional 750 Article no. 4-280030.PD 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 2000 mm Working width: 600 mm Wheel width: 600 mm roll diameter: 90 mm number of rolls: 8 Stck. work height max.: 800 - 950 mm Colour: blau / rot weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: MAZAK Mazatrol 640T Nexus swing over bed: 610 mm swing diameter over bed slide: 350 mm turning length: 982 mm c-axis: indexing: 0.001 ° turning speeds: 4000 U/min tool taper: ASA A2-8 tailstock quill taper MT: 5 rapid traverse X-axis: 30 m/min rapid traverse Z-axis: 33 m/min Overall size: 4500 x 2000 x 1600 mm weight of the machine ca.: 6.5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 650 mm spindle turning speed - stepless: 0-2500 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2000 mm y-travel: 550 mm z-travel: 560 mm weight of the machine ca.: 10 t dimensions of the machine ca.: 5.5 x 3.2 x 3.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
drill diameter: 2-40 mm drilling length: x mm lip angle: 40-180 ° weight of the machine ca.: 0.4 t Dressing device Point thinning attachment More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 550 mm y-travel: 410 mm z-travel: 450 mm b-axis: +110/-110 ° spindle turning speed range: -15000 U/min spindle taper: BT Big Plus 40 tool change unit: 40x size of pallet: 2x D-250 mm weight of the machine ca.: 8.6 t 5 axes machining center FANUC G-Tech 30i Coolant through spindle 3D measuring probe Tool measuring device Misc pallets Misc tool holders More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A system for the mechanical separation of meat and bones, tendons or hides is available. Throughput capacity: approx. 3t/h, filling volume: 800l, working filling capacity: 80%-95%. Machine dimensions X/Y/Z: approx. 2300mm/1800mm/2100mm, weight: approx. 2300kg, control: Siemens Simatic, operating hours: 7504h. Tools included. Documentation available. On-site inspection is possible. Expected to be available from August 2025.
Sumbel Enano 250 banding machine; cleaned and tested; Working width 250mm; suitable for cold glue; was overhauled in 2010. Gluing machine Sumbel Enano 250; cleaned and checked; woking width 250mm; used for cold glue; Rebuilt in 2010.
Double Z mixer with discharge screw Type : UK 2000 AEL Manufacturer : Werner & Pfleiderer Volume : 2000 ltr. Material : Areas in contact with the product in stainless steel
Key data: 550 mm
Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 255 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device
Stainless steel tanks Manufacturer: SAV Type 20062 Capacity 2260 litres Year of construction 2000 Operating temperature product room 95 °C Double jacket for heating and cooling, pressure-resistant up to 8 bar Material V4A
max. wheel diameter: 2800 mm gear width: - mm max. module: 20/30 min. module: Control: Siemens 840 D total power requirement: 40 kW weight of the machine ca.: 50 t The machine has only a few working hours and is like new. With internal milling head. Note: If you require an external milling head, we can offer it separately. - The price of the new machine of this caliber is 2.3 million Euro. - With minimal operating hours, the machine is essentially new. - It is one of Gleasons largest machines - It has the possibility of dry or wet milling, and internal and external gearing. - The machine underwent a comprehensive manufacturers inspection in July 2023 and is in impeccable working order. - Machine is currently partially assembled to allow potential buyers to verify all functionalities. If you wish to see the machine in operation, we have two identical machines running in our produc ...
max. dia. of grinding wheel: 200 mm grinding wheel width: 32 mm grinding wheel hole diameter: 51 mm turning speed range: 2900 U/min total power requirement: 0,9 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inverter heat pump. Very good condition. Was used for heating. Closed circuit. Glycol. Serviced. Power approx. 53 kW
Rheinmetall axle Verse No: 2520-12-341-1309 TKZ : 2300002-100 220 000
Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box, pressing tool, clamping support, square profile, shim profile, square block -Square block: with through holes -Bore: Ø 78 mm -Number: 4x profile available -Price: per piece -Dimensions: 300/200/80 mm -Weight: 27.9 kg/pc.
Grinding length 500 mm Grinding width 230 mm Table size 760 x 200 mm Automatic delivery Magnetic disk Filter system
We currently offer: Number 001 Generator set Type: IL 250-4 Engine Iveco Generator LeRoy Somer Power: 250 KVA Year of construction 2002 Hz 50 IP 23 AVR Regulator R448 Hours 299 Metrics: L: 5.10m H: 1.90m B: 1.00m Weight: 2800 kg Accessories: Control cabinet You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
power capacity: 63 / 93 kW volt: 380 V ampere: 122 / 178 A weight of the machine ca.: 0,5 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2000 mm y-travel: 620 mm z-travel: 520 mm control: Heidenhain TNC 530 CNC turning speed range - main spindle: max. 15000 min/-1 tool taper: BT 40 table clamping surface:: 2500 x 550 mm tool change unit: 30-fach connected load: 25 KVA weight: 10,5 t Dimensions (LxWxH): 8,0 x 2,6 x 2,75 m Vertical CNC Machining Center - 30-station tool changer - Handwheel - Chip conveyor - Belt filter system - Several SK40 tool holders The system can be dismantled to 2.45 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Sysmex Model: CS 2500 Year of Manufacture: 2012 The CS-2500 is a fully automated, high-performance hemostasis analyzer designed for advanced laboratory needs. Utilizing multi-wavelength technology and PSI™ checks, it delivers precise results for coagulation, chromogenic, immunoturbidimetric, and aggregation testing—all in full random access. Compact and efficient, this benchtop system is an ideal solution for mid- to high-volume laboratories. Find more here - / Contact us at -
Description: Type : Oil Transformer Finish : Hermetic Make : SGB Year of construction : 2016 Condition : New Rated power : 4200 KVA Medium Voltage : 22KV +- 2X 2.5% Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Cooling Type : ONAN Gross vehicle weight : 9030 kg Oil weight : 1940 kg DIALA S4 ZX-I Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery . Available for further questions Mon to Sat 8 a.m. to 10 p.m.
Key data: 660 mm, 1495 mm
Mazatrol Matrix Max. Rotary Diameter 660 mm Max. turning length 1,495 mm Travel X-axis: 580 mm Y-axis: 150 mm Z-axis: 1,545 mm W-axis: 1,490 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 22 kW Max. spindle speed 4,600 rpm C-axis Max. bar passage: 65 mm Sub-spindle Drive power: 18.5 kW Max. spindle speed 5,000 rpm C-axis Milling spindle Drive power: 18.5 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 120 tool positions Max. tool diameter: 90/125 mm Max. tool length: 300 mm Max. tool weight: 10 kg lower turret Drum turret 9 tool stations 6 powered tool stations Max. speed: 6,000 rpm Special equipment Mayfran Consep 2000 II Chip Conveyor, Double Switching Filter Preparation IKZ 70 bar 70 bar high pressure pump Milling spindle synchronized threading Cyl ...
Key data: 250 mm
Kitagawa TT 250 HMM03 NC Rotary Tables Table diameter 250 mm Spindle bore Ø 70 mm Weight 260 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Pflugscharmischer, Fabr. Loedige, type: FKM 1200 D. 2 MZ, capacity 1200 ltr., usable capacity approx. 900 ltr., product contact stainless steel, double jacket for heating or cooling, max. 6 bar, 2 pcs cutter heads, mixer drive 22 kw., cutter head drive: 4 kw. each, 400 V. complete with control cabinet, frequency converter available, filling funnel available
Mesh bag packaging machine. Designed to handle PE mesh film to make pillow or gusset bags, suitable for packing fresh vegetable and fruits such as potatoes, onions, apples, cabbage, peas, carrots, pears, lemons, grapefruits, kiwi, etc. Full stainless steel version, PLC controller and touch screen. Print mark sensor. Suitable films: PE-Net, Net-film combinations, etc. Bag styles: pillow, gusset and gusset bag with handle holes. - Specifiations: film width: max. 1.000mm | bag length: 100-600mm | bag width: 240-490mm | max. speed of the machine in neutral: 14 cycles/minute | compressed air: 0.6m?/6bar | power: 220V, 5kW. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 diff ...
Linear weigher and mixer for the mix of two different products - ideal e.g. for seeds, tea, cereals, nuts, sugar, salt, glutamate, rice, generally grainy, granular products. - Specifications: capacity weighing hopper: 15 L | weighing range: 1000-12000g | accuracy: +/- 10-20g | max. speed of the machine in neutral: 25 cycles/minute | power: 220V, 6A, 1.2kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Linear weigher and mixer for the mix of two different products - ideal e.g. for seeds, tea, cereals, nuts, sugar, salt, glutamate, rice, generally grainy, granular products. - Specifications: capacity weighing hopper: 3 L | weighing range: 50-2000g | accuracy: +/- 2-5g | max. speed of the machine in neutral: 55 cycles/minute | power: 220V, 6A, 1.2kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Linear weigher and mixer for the mix of two different products - ideal e.g. for seeds, tea, cereals, nuts, sugar, salt, glutamate, rice, generally grainy, granular products. - Specifications: capacity weighing hopper: 4.5 L | weighing range: 50-3000g | accuracy: +/- 2-5g | max. speed of the machine in neutral: 30 cycles/minute | power: 220V, 6A, 1.2kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Linear weigher with 100g up to 5000g weighing range. Weighing/dosing of granular and chunky products. 2 weighing heads with load cells and 3 vibrating feeders allow fast and precision weighing. - Specifications: capacity weighing hopper: 8 L | number of weighing heads: 2 | weighing range: 100-5000g | accuracy: +/- 1-3g | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 1-phase | stainless steel version SUS 304. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are pos ...
Linear weigher with 100g up to 10,000g weighing range. Weighing/dosing of granular and chunky products. 2 weighing heads with load cells and 2 vibrating feeders allow fast and precision weighing. - Specifications: capacity weighing hopper: 20 L | number of weighing heads: 2 | weighing range: 100-10,000g | accuracy: +/- 1-25g | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 1-phase | stainless steel version SUS 304. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo a ...
Linear weigher with 100g up to 3000g weighing range. Weighing/dosing of granular and chunky products. 2 weighing heads with load cells and 3 vibrating feeders allow fast and precision weighing. - Specifications: capacity weighing hopper: 5 L | number of weighing heads: 2 | weighing range: 100-3000g | accuracy: +/- 1-3g | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 1-phase | stainless steel version SUS 304. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are pos ...
Weighing unit with 2 heads. Max. weighing of 1.000g/1 liter (depending on product). - Specifications: accuracy 0.5-1.0g | 220V/1kW | max. speed of the machine in neutral: 25 cycles/minute. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Weighing unit with 2 heads. Max. weighing of 2.500g/2.5 liter (depending on product). - Specifications: accuracy 2-5g | 220V/1kW | max. speed of the machine in neutral: 25 cycles/minute. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Very large linear weigher for high volume weighing with 2 heads. - Specifications: weighing range: 5-50kg | max. speed of the machine in neutral: 20 cycles/minute | accuracy: 0.2% (depending on product) | power: 2.0kW | machine dimensions: L3300xW3000xH4700mm (including 1400mm standing frame/can be customized) | weight: 1800kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Very large linear weigher for high volume weighing with 2 heads. - Specifications: weighing range: 3-30kg | max. speed of the machine in neutral: 20 cycles/minute | accuracy: 0.2% (depending on product) | power: 2.0kW, machine dimensions: L3100xW2800xH3600mm (including 1400mm standing frame/can be customized) | weight: 1200kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
maximum number of results exceeded
please refine your search
