129,172 used machines on RESALE, but how to find them? Machine Search
pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter max.: mm regulating wheel width: mm max. width of grinding wheel: mm Control: SIEMENS 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 850 mm grinding length: 6000 mm centre height: 425 mm grinding wheel size: 750 x 100 x 305 mm table - swivable: -2 / +2 Grad table load capacity: 3000 kg chucking diameter: 315 mm grinding head swivelling: 90 Grad spindle taper MT: 6 spindle speeds: 12 -300 mm grinding head - power requirement: 22 kW Control: Siemens 840D grinding wheel head adjustable: +30 / -10 ° total power requirement: 41 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 16,0 x 4 x 2,1 m - Siemens Sinumerik 840D CNC control - SBS balance system - INTERNAL GRINDING DEVICE - 4 support steady rests - Tailstock - Coolant system - Electronic hand-held control panel - Ball screws X-Z - Pneumatic quill stroke - Paper belt filter device - Oil mist extraction device - Full protective cover The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
planing width: 610 mm total power requirement: 19,5 kW Weight: 2500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1400x1300x1800 mm Weight: 0 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1200x1100x1160 mm Weight: 950 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity 2.7T /6000 lbs. Stroke 1403 mm weight 77.5t
Key data: 500 mm, 400 mm, 330 mm
Condition: in working order Availability: immediately Location: Thuringia/Arnstadt Loading: by buyer Forklift: will be provided Technical specifications without guarantee
Forklift hydraulic/manual operations, max load wight 600 kg
CNC controlled cutting table for flat glass sheets 6000 x 3210 mm. With topiary and model catalogue. The glass panels are placed on top by means of swivelling arms. Power consumption 20 kW, dimensions 9200 x 4500 mm
Transnorm leading feed belt conveyor with overdrive GF 1720/1700/1650/1200/1000-700/600-600/500 RA2468 (NL-NB-GuB) Technical data: Conveyor length (NL): 1720, 1700, 1650, 1540, 1200, 1000 mm frame width (NB): 700 or 600 mm belt width (GuB): 600 or 500 mm Overall height (BH): 80 mm Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Drive: overdrive Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: Übertrieb scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone ...
Control Other Grinding length [mm] 600 Grinding width [mm] 400 Grinding spindle: Speed 1,400 rpm Power 3.7 kW Grinding wheel dimensions (max.) 300 x 50 x 76.2 mm Work table: Clamping surface magnetic clamping plate, 600 x 400 mm Table load (max.) 600 kg Hydraulic table drive Longitudinal table stroke 200 - 650 mm Rapid traverse 28 m/min Grinding area 600 x 400 x 375 mm Equipment/accessories: Measuring System Engine Measurement System in X/Y/Z Dressing system prism arm for einkorn diamond Cooling coolant system with paper belt filter, tank capacity 140 l Other equipment Partial space encapsulation, work area light
workpiece diameter: - mm workpiece weight: - kg workpiece height: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used Polin skin pass machine with rotary bar. Price without accessories - but can be provided by us at any time, Machine is in working order. Instruction manual available.
Wood Her CUT 6120 heavy-duty precision high-performance panel sizing line Cutting length 3900 mm Cutting depth 3100 mm Saw blade protrusion 82 mm Control CUTCONTROL 2, 17" TFT screen – touch Powerful optimization software CD CUTTING SYSTEM Label Printers 3 air cushion tables 1800 x 600 mm Car. Angle pressure device up to max. 1300 mm Car. Cutting Setup Residual cutting device Cable remote control pneum. Trimming stops Main saw unit 11 kW, saw blade DM 350 mm Scoring Saw Unit 2.2 kW, Saw Blade DM 180 mm Saw carriage feed 0 - 100 m/min infinitely variable Saw carriage return 130 m/min Width stop feed 0 - 100 m/min (EU 0-25 m/min) Width stop feed - return 100 m/min Collets width stop 7 pcs. Compressed air connection capacity 6 bar Extraction connection basic machine 1 x 120 mm Suction connection pressure beam 3 x 120 mm Extraction capacity 3500 m³h Air speed 30 ...
B&A REF: 9249 TON: 165 SCREW DIAMETER: 50MM SHOT WEIGHT: 398 STROKE VOLUME: 432CM3 INJECTION PRESSURE: 1500AR PLATEN SIZES: 690 X 690MM DBTB: 460 X 460MM MIN MOULD HEIGHT: 155MM MAX MOULD HEIGHT: 560MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1060MM EJECTOR STROKE: 160MM CONTROLS: SEF 2000 AIR VALVES: 1 MOTOR: 18.5 HEATING CAPACITY: 9.9KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC
used
B&A REF: 9254 TON: 60 SHOT WEIGHT: 151 STROKE VOLUME: 166CM3 INJECTION PRESSURE: 1235AR PLATEN SIZES: 650 X 650MM DBTB: 360 X 335MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 650MM EJECTOR STROKE: 80MM CONTROLS: ALPHA 2 MOTOR: 11 SERVO HEATING CAPACITY: 7.7KW SCREW DRIVE: HYDRAULIC
General SKU300U1007 MakeHeraeus LocationBarneveld CEcheck TypeVT6025 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume25 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature200 °C Number of compartments:1 Capacity25 Ltr. Internal width300 mm Internal depth307 mm Internal height275 mm Electric heating1,3 kW Number of doors:1 MaterialStainless steel Information No.97106865 Year of construction1997 Floorspace0,48x0,45 m Total height0,60 m Weight60 kg Extra SpecificationsChamber dim. 300x275x307 mm, volume 25 ltr, temp range max 200°C, klasse 2Drying ovensThermo Scientific HeraeusDryers > Drying ovensBrand > Thermo Scientific Heraeus What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ...
This 3-axis Auerbach FUW 625 was manufactured in 1997. It features a travel of 625 mm in the X-axis, 525 mm in the Y-axis, and 455 mm in the Z-axis. The machine is equipped with a 20-slot tool changer and operates at spindle speeds ranging from 25 to 5,000 RPM. If you are looking to get high-quality machining capabilities, consider the Auerbach FUW 625 vertical machining centre we have for sale. Contact us for further details.
A CNC tube welding system Weil Technology for longitudinal seam welding is available. Tube diameter range: 76mm-600mm, Tube length range: 250mm-1550mm, Material thickness range: 0.8mm-2mm, Welding process: Laser, Max. welding output: approx. 80pieces/h. Documentation available. An on-site inspection is possible.
Inv. Num. : 8988 Type: HD 16-6000 Producer: TOS Created: 1957 Parameters: Frame passage: 1600 mm Planner length: 6000 mm Weight: 20000 kg
(1985) 630t Gräbener Knuckle-Joint Press High-Performance Knuckle-Joint Press This 1985 Gräbener knuckle-joint press is a high-capacity machine engineered for applications requiring extreme force at the bottom of the stroke, such as coining and cold forming. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GKN 630 Year of Manufacture: 1985 Nominal Force: 630t Stroke: 112 mm Stroke Rate: 55 strokes/min Shut Height: 800 mm Tool Holder Adjustment: 80 mm Motor Output: 25 kW Pneumatic Connection Pressure: 5.5 bar Operating Voltage: 3x 380V / 220V, 50Hz
(1978) 630t Gräbener Knuckle-Joint Press Industrial Knuckle-Joint Press for High-Force Cold Forming This Gräbener press utilizes a knuckle-joint mechanism to deliver exceptional force, making it highly effective for precision coining and embossing. With a massive 27,000 kg frame and a 28 kW motor, it provides the stability required for heavy-duty metalworking operations. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 630 NS Year of Manufacture: 1978 Nominal Capacity: 630t Stroke Rate: 45 strokes/min Shut Height: 420 mm Tool Holder Adjustment: 80 mm Frame Width: 820 mm Table Area (Width x Depth): 800 mm x 850 mm Motor Output: 28 kW Motor Speed: 1,475 rpm Operating Voltage: 3x 380V / 220V, 50Hz Total Weight: 27,000 kg Overrun Time: 206 ms Safety Distance: 330 mm
(1979) 630t Gräbener Knuckle-Joint Press Industrial Knuckle-Joint Press for High-Force Cold Forming This Gräbener press utilizes a knuckle-joint mechanism to deliver exceptional force, making it highly effective for precision coining and embossing. With a massive 27,000 kg frame and a 28 kW motor, it provides the stability required for heavy-duty metalworking operations. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 630 NS Year of Manufacture: 1979 Nominal Capacity: 630t Stroke Rate: 45 strokes/min Shut Height: 420 mm Tool Holder Adjustment: 80 mm Clearance Between Uprights (Frame Width): 820 mm Table Area (Width x Depth): 800 mm x 850 mm Motor Output: 28 kW Motor Speed: 1,475 rpm Operating Voltage: 3x 380V / 220V, 50Hz Total Weight: 27,000 kg Overrun Time (Stopping Time): 160 ms Safety Distance: 266 mm
(1986) 600t Gräbener Knuckle-Joint Press Fully Automated High-Precision Short-Stroke Forming This knuckle-joint press delivers a nominal force of 600 metric tons, designed for high-precision forming applications requiring controlled force near bottom dead center. Technical Details Machine Type: Knuckle-Joint Press Model: GK 600 Nominal Force: 600t Year of Manufacture: 1986 Rated Force Travel (Pressing Path): 1.7 mm Nominal Work Capacity: 10,200 Nm Stroke: 100 mm Stroke Rate: 45 strokes/min Shut Height (Max. Die Space): 360 mm Tool Holder Adjustment: 50 mm Clearance Between Uprights: 580 mm Table Area (Width x Depth): 550 mm x 430 mm Tool Holder Shank Hole (Ø x Depth): 65 mm x 105 mm Motor Output: 15 kW Motor Speed: 1,500 rpm Pneumatic Connection Pressure: 5.5 bar Operating Voltage: 3x 380V / 220V, ...
This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine.
x-travel: 2800 mm y-travel: 1000 mm z-travel: 1200 mm table surface area: 2000 x 800 mm rotary table dia.: 800 mm spindle taper: SK 50 spindle turning speed - stepless: 50 - 2000 U/min max. torque on the spindle: 3000 Nm spindle drive: 30 kW feeds longditudinal/cross/vertical: 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical: 7 m/min control: SIEMENS control: SINUMERIK 850 M no. of tools in magazin: 56 workpiece diameter at full load: 114 mm wotkpiece diameter with 2 vacant positions: 200 mm workpiece length: 400 mm weight of tools max.: 16 kg tool changing time: ca. 8 - 9 sec internal coolant system feed: ja / yes total power requirement: kW weight of the machine ca.: 25,4 t = 5-axis CNC-bed-type milling machine with integrated NC-rotary table and NC-swivelling milling head - Acc.: tool pre-setting device, various tool fixtures, chip conveyor, coolant with high pressure pump ...
DMG MORI DMC 635 V Ecoline CNC machining center was built in 2014 in Poland by FAMOT Pleszew Sp. z o.o. The machine, designed for precision machining of workpieces, is the perfect solution for both unit and series production. The machining process is performed fully automatically by means of a reliable electro-spindle and tools taken from a 20-position magazine. Process stability, in turn, is ensured by an extremely rigid bed, which continuously eliminates any vibration and oscillation. All this is complemented by an easy-to-use HEIDENHAIN CNC control with many useful functions. The DMG MORI DMC 635V Ecoline CNC vertical machining center weighs 3900 kg. Technical specifications of the DMG MORI DMC 635 V Ecoline CNC milling machine - HEIDENHAIN TNC 620 CNC control with workpiece and machining 3D simulation - feed in the X/Y/Z axis: 635/510/460 mm - rapid traverse in the X,Y,Z axis: ...
Binder heating system Wood chip heating Type RRK 640-850 Year of construction 2013 For steam and hot water production Heating capacity up to 850 kW Maximum operating temperature up to 150 °C Maximum operating overpressure 12 bar Water capacity 1520 litres Hydraulic insertion from the right front side (instead of stoker auger) Heat exchanger separately Without material feed from the bunker Flue gas cleaning via cyclone
CNC machining center Emco, type VMC 600, built in 1998 incl. handwheel + 3 vices with clamping device
Bandwidth Infeed conveyor Calibration head incl. flour Humidification station Cutting frame for 2 tools Guillotine incl. various folding shoes, cutting rollers and filling device incl. 2 screw rollers -dismantled bakery condition/not tested or cleaned - Cutting the band
MELTER MARCHESINI DUMEK 600 L Melter used for the preparation of various products. Auxiliary unit for turboemulsifiers to heat the aqueous or oily phase, or as a preparation unit for some creamy products that do not require the functions of the turboemulsifier. Slow and/or rapid mixing systems available. Built in 2018. - Capacity: 600 liters - Material: AISI 316 stainless steel
(1988/2025) 600t Gräbener Knuckle-Joint Press Heavy-Duty 600-Ton Precision Forming Press - 2025 General Overhaul This Gräbener GKS 600 is a high-capacity knuckle-joint press designed for demanding metal-forming tasks like cold forging, embossing, and heavy-duty coining. It was manufactured in 1986 and has undergone a complete general overhaul in 2025, ensuring modern reliability while maintaining its massive 6,000 kN nominal force. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GKS 600 Nominal Force: 600t Year of Manufacture: 1988 (General Overhaul: 2025) Stroke Length: 160 mm Production Speed: 35 strokes per minute Nominal Energy: 10,200 Nm Nominal Force Path: 1.7 mm Frame Width: 580 mm Table & Tooling Dimensions Table Surface (W x D): 550 mm x 620 mm Ram/Tool Holder Surface (W x D): 550 mm x 430 mm S ...
Melon Peeling Machine – Feltracon 61M, Manufacturer: Feltracon, Model / Type: 61M, Year of manufacture: 2019, Machine type: Industrial melon peeling machine, Description, The Feltracon 61M is an industrial melon peeling machine designed for efficient peeling of whole melons in fruit processing facilities. The machine removes the rind from melons quickly and consistently, preparing the fruit for further processing such as cutting, portioning, or packaging., The system is built for hygienic operation in food production environments and is suitable for continuous industrial use., Technical Specifications, - Manufacturer: Feltracon, - Model / Type: 61M, - Year: 2019, - Machine type: Melon peeling machine, - Application: Peeling of whole melons, - Construction: Hygienic food-grade design, - Operation: Industrial continuous processing, Key Features, - Efficient automatic melon peeling system ...
- Very little hours - Hydraulic tailstock - CE Safety doors - Multi Fix Tool holders system D1 - Chip conveyor
Year of manufacture 1989 Stacking lift Stacking board buffers Tub system photoelectron. Stack Scanning Delivery date: immediately
A Kittner food conveyor is available. Width: 600mm, total length: 8300mm, motor power: 370W, belt speed: 6.6m/min, angle: 31.5°, conveying height: 3300mm. Documentation available. An on-site inspection is possible.
grinding length: 1025 mm grinding width: 520 mm workpiece height: - mm Control: SINUMERIK 840 D tool taper: HSK-A 63 A - axis: + 110 / - 5 ° workpiece weight: 30 kg distance grinding spindle - table min./max.: 473,5 - 1023,5 mm x-axis: 520 mm y-axis: 550 mm z-axis: 1000 mm V-axis: 166 mm feed x-axis: 4 - 6.000 mm/min feed y- axis: 4 - 4.000 mm/min Feed z- axis: 30 - 25.000 mm / min. table dimensions: 1.400 x 874 mm spindle speeds (infinitely variable): 0 - 12.000 U/min power capacity - grinding motor: 35,00 kW grinding wheel diam. min/max.: 100 / 300 grinding wheel width: 60 mm total power requirement: 100,00 kW weight of the machine ca.: 11,00 t dimensions of the machine ca.: 8,60 x 7,25 x H3,80 m 5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool chang ...
Rotary die cutter and magnetic stripe gluer for ferry or other similar tickets. In production ready condition.
cutting dimensions max.: 600 x 1000 mm plate thickness: max. 3 mm cutting angle: 1,5 ° side stop electrical adjustable: 0 - 1010 mm rear stop electrical adjustable: 0 - 610 mm no. of strokes: 60 Hub/min total power requirement: 14 kW weight of the machine ca.: 8,7 t dimensions of machine L x W x H: 2,5 x 2,18 x 2,3 m Accessories: sheet metal stacking device on rails The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical Machining Center YCM - VMC 65A / Fanuc OM -CE marking -Control Fanuc OM -Operational condition / function video available -Travel X / Y / Z 650x410x615mm -Table dimensions 840x420mm -Speed range up to 6000rpm -Tool holder BT 40 -Tool magazine / side changer 16 compartment -Electric handwheel -Coolant device -Motor power 7.5 KW -Machine feet Dimensions: LxWxH 3.5x2.4x2.8 meters / Weight 4500Kg
DAINIPPON SCREEN DIRECT SCANAGRAPH SG-608 II Technical data see photo -Mounting device -2 storage cylinders The system has been upgraded for electronic image transmission. Data imput directly on Macintosh, screen and programs (Photoshop) etc. are included. (A new Mac version was needed for the image editing.) On request, a second scanner of the same type can be provided free of charge for any spare parts.
A CNC large-format rigid-bed milling and boring center Soraluce is available. Travel X/Y/Z: 4500mm/1600mm/1300mm, table dimensions X/Y: 6000mm/1100mm, max. table load: 5000kg/m², spindle bearing diameter: 90mm, tool holder: ISO 50, speed: 5000rpm, power: 43kW/32kW, rapid traverse: 35m/min, feed force: 16kN, coolant volume: 350l, delivery pressure: 5bar, tool positions: 40. Machine dimensions X/Y/Z: approx. 8700mm/5000mm/3850mm, weight: approx. 22000kg, control: Heidenhain. Including IKZ, chip conveyor, probe, tool probe and cooling unit. Documentation available. An on-site inspection is possible.
Transnorm conveyor belt GF 1740-600-500 RA2478 Technical data: Conveyor length (NL): 1740 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.53 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 1740 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 0,53 scope of delivery: without supports and side guides Für eine ...
Key data: 500 mm, 100 mm, 2500 1/min
Special price to be submitted at short notice
Sandblasting machine Cassani STL A-600/2TR 2 turbines Sandblasting machine Cassani STL A-600/2TR 2 turbines
2 pieces Ice Cream Chest/Ice Cream Sales Chest/Ice Cream Chest/Freezer Used External dimensions W: 190xD:1100 H:140cm with round glass lid with lighting with rear storage compartment 2 doors not cleaned front lower fairing is missing
A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
