128,416 used machines on RESALE, but how to find them? Machine Search
engine: 220/380/420 V ampere: 4.75/2.75 A motor speeds:: 1420 U/min. engine output: 1,1 kW weight: 100 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sanding length: 650mm, max. sanding diameter: 508mm, center height: 125mm, workhead speed: 1500rpm, max. workpiece weight: 30kg, workpiece swivel range: 30°-90°, tailstock: MK3. Grinding wheel diameter: 508mm, grinding wheel width: 40mm, bore: 203mm, max. internal grinding diameter: 150mm. Machine dimensions X/Y/Z: approx. 4300mm/3100mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik 820G. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025.
A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible.
Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.
x-travel: 400 mm y-travel: 330 mm z-travel: 350 mm total power requirement: 6,3 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 736 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SEPARATOR BAADER, TYPE: 694 Technical description: Power supply: 230-400V /50Hz / 1,5Kw Bandwidth: 200 mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Dimensions: 1140 x 950 x 1300 mm This machine produces bone-free fish meat from pinbone cuttings but also from other fish cuttings with bones and skin which are yielded in fish processing. The material is submitted to a brief pressing operation between an elastic belt and a perforated drum, so that the fibre structure of the fish meat is maintained. This material may be processed into high-grade products.
SEPARATOR BAADER, TYPE: 699 WITH FEED ELEVTOR AND OUTLET CONVEYOR Technical description: - Separator hopper with breaker and helicoid Dimensions: 2100 x 1050 x 1400 mm - Elevator for bins up to 200 liters Lift height: 2500 mm Dimensions: 900 x 750 x 3500 mm - Separator Baader, type: 699 Serial number: 12-7157-699 Year: 1989 Power supply: 380 V, 50 Hz, 15.0 A, 8.0 kW Drum holes: ? 2 mm Dimensions: 1500 x 1450 x 1550 mm - Outlet conveyor with plastic band Bandwidth: 200 mm Lift height: 900 mm Dimensions: 1500 x 400 x 950 mm This machine uses the same principle as the BAADER 694 and 697 but with much higher throughput. It is a further development of the BAADER 695. The speed is infinitely variable up to twice the normal speed. The belt pressure is controlled by a hydraulic system. Pressure and speed indicators allow correct adjustment of the machine to different raw material. T ...
SEPARATOR BAADER, TYPE 694 Technical description: Power supply: 380-440 V/50-60 Hz Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Dimensions: 1100 x 1000 x 1300 mm This machine produces bone-free fish meat from pinbone cuttings but also from other fish cuttings with bones and skin which are yielded in fish processing. The material is submitted to a brief pressing operation between an elastic belt and a perforated drum, so that the fibre structure of the fish meat is maintained. This material may be processed into high-grade products.
Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton
grinding height: 60 mm grinding width: 120 mm grinding wheel diameter: 600 mm grinding length: mm workpiece height: 60 mm total power requirement: 50 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 ______________________________________________________________________ ________ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 1 ...
x-travel: 630 mm y-travel: 500 mm z-travel: 500 mm Control: CNC total power requirement: 13 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding height: 50 mm grinding width: 120 mm grinding wheel diameter: 600 mm total power requirement: 85 kW weight of the machine ca.: 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _______________________________________________________ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grin ...
grinding diameter: 360 mm grinding length: 650 mm centre height: 180 mm Control: SIEMENS 840 D total power requirement: 15 kW weight of the machine ca.: 9500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 3 t throat: 0 mm stroke: 200 mm total power requirement: 15 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 30 mm workpiece diameter: 30 mm threading length: 110 mm threading length: 110 mm thread pitch: 0,5-2,75 mm/GG thread pitch: 0,5-2,75 mm/GG total power requirement: 4,5 kW total power requirement: 4,5 kW weight of the machine ca.: 1,7 t weight of the machine ca.: 1,7 t dimensions of the machine ca.: m dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 1600 mm grinding width: 600 mm workpiece height: 500 mm total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 130 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 1000 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 850 mm main drive motor: 45 kW table surface area: 1250x1600 mm Control: Heidenhain type: TNC 426 workpiece weight: 12500 kg : 720 radial face slide travel: 240 mm total power requirement: 90 kW weight of the machine ca.: 26,3 t dimensions of the machine ca.: 6,5x5x5x4 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further of ...
sheet width: 610 mm plate thickness: 1,0 mm distance between columns: 620 mm diameter of upper rolls: 38 mm total power requirement: Handbetrieben weight of the machine ca.: 40 Kg dimensions of the machine ca.: 950 x 270 x 360 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 13 bar Effective free air delivery: 690 L/min Receiver capacity: 270l / 16bar l / bar weight of the machine ca.: 199 kg. motor: 400V / 5,5KW V / KW range L-W-H: 1,7 x 0,6 x 1,27 mm It is a high pressure version (especially for truck service or for heavy work). OPTION: The UWM 7.5/690/270 can be equipped with a starting unit (star-delta circuit). Surcharge: EUR 379 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 300 mm z-travel: 440 mm table-size: 1120 x 260 mm spindle taper ISO: 40 spindle turning speed range: 35 - 1600 U/min total power requirement: 2,2 kW weight of the machine ca.: 1,36 t dimensions of the machine ca.: 1,65 x 1,32 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Roller conveyor length: 6000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 160 kg length in width: 620 mm length in total: 6000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm throat: 360 mm bore stroke: 150 mm spindle turning speed range: 120 - 3000 U/min spindle taper: SK 40 : 650 mm : 320 mm vertical adjustment: 500 mm table surface area: 1000 x 300 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 2,2 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 600 Kg Magnetic field: 228 x 122 mm weight: 0,022 t dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
measuring length: bis 5700 mm Tube length: 6000 mm numbers of toolholders: 7 : Rohr Edelstahl dimensions: 6,0 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 600 mm table width: 240 mm x-travel: 370 mm y-travel: 130 mm table height: 165 mm weight: 60 kg dimensions: 0,8 x 0,45 x 0,2 mm Cross table with turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Schütte 32 multi-spindle lathe, completely rebuilt by GWM-Tech, Fanuc AC motors, FANUC motors for threading, PLC, pick-up spindle chuck, bar loader Cucchi Pietro
impact length: 6000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 195 kg length in width: 620 mm length in total: 6400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BREADING MACHINE, KOPPENS TYPE: PR 600 Technical description: Machine number: PR600-972 Power supply: 380-440 V/50-60 Hz Power: 1.7 kW Weight: 300 Kg Stainless steel mesh belt Belt widht: 600 mm Dimensions: 2200 x 800 x 1900 mm
SEPARATOR BAADER, TYPE: 696 Technical description: Machine number: 12 6533 0696 Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Power supply: 380 V, 3 Ph, 50 Hz, 3.7 A, 1.5 kW Dimensions: 1050 x 1000 x 1340 mm
Product: round 2kg bucket for mozzarella with handle and snap-on lid, throughput: 1600-1800 buckets/h, bucket dimensions: 175x131mm, connected load: 7kW, compressed air connection: 6bar, length: 2060mm, width: 2060mm, height: 3200mm, weight: approx. 4t. Double-lane, includes cup setter, cup control, free space for the installation of a multi-head weigher, rag dosing, CIP design, inverted lid station, push-on station, lifting/pushing-off, discharge conveyor, process control, central lubrication, drainage channels and other elements. On-site inspection is possible, the machine is already dismantled and ready for loading, with documentation. The machine did not run much.
4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.
A continuous servo side sealing machine IFP for the food industry is available. Packaging capacity: 100 packages/min, max. sealing dimensions: 650mm, max. sealing length: unlimited, film material: PP/POF/PVC, max. film reel width: 800mm, max. film reel diameter: 350mm, working height range: 870mm-930mm, output: 9kW, machine dimensions X/Y/Z: approx. 1800mm/2650mm/1500mm, control: Siemens. Documentation available. On-site inspection is possible.
A Hobart tray packaging machine is available. Product weight min/max: 40g/5kg. On-site inspection is possible.
A film banding machine with shrink wrapper Meurer packaging machines is available. Banding capacity: 35 products/min, bundle capacity range: 1x5/1x10, product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm, bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm. Machine dimensions X/Y: approx. 3300mm/3020mm, operating hours: approx. 5842h. Documentation available. On-site inspection is possible.
A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.
A Göztepe belt cooling machine (cooling tunnel), which was used to extend product life, is available. Motor power: 4kW, inlet height: 1670mm, outlet height: 1150mm, base distance: 2000mm, working length: 8500mm, machine dimensions X/Y/Z: approx. 8600mm/1900mm/2600mm. Documentation available. On-site inspection is possible.
Print technology: Thermal inkjet, max. print width: 914mm, print resolution: 600dpi, media types: Plain paper, coated paper, transparencies. Documentation available. On-site inspection is possible.
A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible.
A total of 17 robots and 4x axes (7-axes) in mint condition and in their original packaging are available. 1) 1x industrial robot ABB IRB 6700-300/2.70, year of manufacture: 2023. 2) 7x industrial robots ABB IRB 7600-340/2.80, year of manufacture: 2023. 3) 9x industrial robots ABB IRB 4600-20/2.50, year of manufacture: 2023. 4) 4x 7-axis ABB IRBT 7004 and IRBT 4600 for IRB 7600 and IRB 4600. Documentation available. On-site inspection is possible. Individual sale is possible.
turning diameter over bed: 630 mm turning diameter over slide rest: ? mm turning length: 1500 mm turning speed range: 7 - 1400 U/min spindle bore: 80 mm 3-jaw chuck: FORKARDT F 500 tool holder: Multifix C total power requirement: 17 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,5 1,5 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible.
table diameter: 630 mm table load: 1 t table height: 170 mm total power requirement: 0 kW weight of the machine ca.: 330 kg dimensions of the machine ca.: 900750170 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 18,5 kW volt: 400 V ampere: - A total power requirement: 18,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: - m N0. 4700 Parallel shaft geared motor / geared motor NORD / Getriebebau NORD SK 6282 AZ - 180 M / 4 TF H2 n 155 min-1 / max. 2454 Nm / i = 9.39 / hollow shaft Drive: 18.5 Weight approx. 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 2000 mm Working width: 600 mm Wheel width: 600 mm roll diameter: 90 mm number of rolls: 8 Stck. work height max.: 660 - 815 mm Colour: blau / rot weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 26 t punching cross-cut in cmm: 80 x 2,5 stroke: - mm total power requirement: 1,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 x 3 x 2,5 m No. 1096: Revolver hole punch 26 to. EDEL, type SMO 26/660/12 built 1973 with throat depth 660 mm Working area: diam. 80 x 2.5 mm Drive power: 1.5 kW Accessories: 12-station tool magazine Various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece weight: 160 kg workpiece length: 250 mm diameter: 620 mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m Auswuchtwaage für Schleifscheiben und scheibenförmige Prüfkörper Workspace: 620 x 250 Control: max. Prüfkörpergewicht 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
