heidelberg 102 6 used for sale

Connection line, connection cable, data line, bus cable, signal line -Manufacturer: Siemens signal cable in original packaging -Type: 6FX8002-2DC20-1ABO -Quantity: 1x available -Price: piece -Dimension packed: 245/190/H30 mm -Weight: 0.2kg

PLC control, still 1 piece in stock, price from stock pr piece

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 650 mm -Length extended: 1127 mm -Width: 14 mm/height: 58 mm -Price: per pair (left right) -Weight: 2.9 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 650 mm -Length extended: 1131 mm -Width: 13 mm/height: 56 mm -Price: per pair (left right) -Weight: 2.9 kg

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Faceplate, faceplate chuck, four-jaw chuck -without: screw-on jaws Manufacturer: Forkardt -Mouth size: Ø 610 mm -Cone holder short cone: 8 (139 mm) -Weight: 121 kg

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS single door: 600 x 2000 RAL 7035 -Article No.: 5050154 -Dimensions: 2040/645/H90 mm -Weight: 33 kg

Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders -Manufacturer: FXMeiller, hydraulic cylinder / tilt cylinder stroke 670 mm -Piston rod: Ø 45 mm / holder Ø 40 mm -Recording cylinder: Ø 50 x 45 mm -Cylinder: outside Ø 102 mm -Dimensions: 1055/210 / H180 mm -Weight: 50 kg

Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

electric motor, three-phase motor -Manufacturer: VEM, electric motor from milling machine WMW HECKERT FSS 315-V -Type: IDM 100/30.6013/2 -Power: 40 W -Speed: 1380 rpm -Shaft: Ø 9 x 8 mm -Design: B5 -Protection class: IP 22 -Dimensions: 165/135/H160 mm -Weight: 4 kg

An original control cabinet that was dismantled by the PAAL Konti 600 E/K, built in 2005. It is based on SIEMENS S7 controller. It is also suitable for other models such as: Konti 700 A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Seitz Orion 60 x 60, combi filter, approx. 45 hl/p.h. for beer Type 60A180, EK part 59 EK stainless steel plates, 2 EK end plates KG part 14 KG stainless steel frame, 1 KG stainless steel end frame 1 diverting plate

Travel distances: 350 x 250 x 315 mm [ X x Y x Z ] Table size X: 576 mm Table size Y: 400 mm workpiece weight: 500 kg C-axis Pinole recording: EROWA

PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, ET 200S Compact -Type: 6ES7 193-4DL00-0AA0 TM-C120C -Dimensions: 120/170/H45 mm -Weight: 0.5 kg

Balancing valve, shut-off valve, ball valve, ball valve -Manufacturer: Castel, ball valve, unused, original packaging -Type: 6590/M12 -Connections: 12 mm ODS -Cardboard dimensions: 130/85/H40 mm -Weight: 0.3 kg.

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, mounting plate -Partial mounting plate: 500 x 700 mm -with: fastening material -Dimensions: 700/500/H20 mm -Weight: 8.6 kg

Schnitzel plug completely stainless steel Track width 600 mm infinitely variable speed 0.60 kW Dimensions (L x W x H) : ± 1,900 x 1,000 x 1,500 mm Mobile

Cooking length 4,000 mm Track width 600 mm completely stainless steel steam-heated with electric lifting device Temperature distribution in 2 zones Dimensions (L x W x H) : ± 5,000 x 1,550 x 2,200 mm infinitely variable speed

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 132 teeth -Number: 19x saw blades available -Price: per piece -Weight: 10,1 kg/piece

Level sensor, Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch -Manufacturer: KSR Kuebler, Magnetic Float Switch -Type: ARV1.5 -VSS/R-L1.650/12-V44A-adjustable -Immersion depth: approx. 1650 mm -Dimensions: 1785/75/90 mm -Weight: 1.4 kg

CNC control, control panel, machining center, server cabinet -I/O: Control panel -Dell: Desktop KXGVD -Dell: Precision T1650 Tower -with: scanner -Dimensions: 505/640/H1600 mm -Weight: 74 kg

New brushing machine KUSING K2L-600e, machine manufactured in Slovakia, in Europe by a company with more than 30 years of experience with woodworking machines. Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1250 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.

Clamping plate, welding table, welding table, straightening plate -Mounting plate is: steel -Width: 650 mm -Length: 650 mm -Height: 845 mm -Plate thickness: 40 mm -Plate is: on steel frame -Transport dimensions: 650/650/H845 mm -Weight: 203 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 600 mm -Length extended: 1215 mm -Width: 15 mm -Height: 57 mm -Price: per pair (left right) -Number: 7x pairs available -Weight: 2.7 kg

Make and Model: Heliex HP145 110, HP204 630 Year: 2017 Hours: 0 Capacity kW: 110, 630 HZ : 50/60 Voltage: 400/480 V Condition: It is as new. Has had basic commissioning only. Extra: Ambient temperature: -10°C to +45°C, Ambient humidity:

Universal screwdriver, construction screwdriver, screwdriver, electronics screwdriver, hand drill -Nominal input: 740 watts -Max. drill bit: Ø 13 mm -Connection: 220 volts Quantity: 1 available -Dimensions: 450/210/H80 mm -Weight: 4.3 kg/piece

grinding diameter: 250 mm grinding length: 600 mm centre height: 125 mm grinding wheel diameter: 500 mm grinding wheel width: 80 (100) mm bore: 203,2 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm workpiece spindle swivable +/-: 360 ° grinding head swivellable +/-: 0 ° grinding spindle speed: U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø table swivelabel +/-: 10 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg max. workpiece weight -without tailstock: 130 inkl. Spannung kg cross travel: 270 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 5,5-7,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the s ...

Thickness planers Back to overview - Print version WEIBERT WY-D41 Thickness planer WEIBERT WJ-D41 NEW MACHINE! 400V 4 KW (5,5 HP) n=4500 min Planing width of 406mm Planing shaft diameter 100mm Max.4mm Chip Removal 4-reversible blade shaft Passage height of 4-225mm Feed speed of 6 and 12m/min.with own engine 1.1 KW (1.5 hp) Suction connection of 120mm Machine weight of 370 kg Machine tables Planing shaft bearing block and table guide made of GREY CAST IRON Manual height adjustment with handwheel 2 rolls in the thickness table G&WJ-D41 relka 22 Request information material WEIBERT WY-D53 Thickness planer WEIBERT WJ-D53 NEW MACHINE! 400V 5.5 KW (7.5 HP) n=5000min Planing width of 530mm max.chip removal of 8mm Planing shaft D=125mm 4-reversible blade shaft Passage height of 3-300mm Feed speed of 8 and 16 m/min. Engine for feed 1.5 KW (2 hp) Sucti ...

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Side door -Dimensions: 1980/635/H40 mm -Weight: 26 kg

Bevel gear motor, G50BB124MHAR2C, 401r/min, 68Nm, Lenze, mint condition If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part was disassembled from a new unit that was not put into operation. - Bevel gear motor G50BB124MHAR2C, 401r/min, 68Nm, I=3,565 - Motor MDEMABS100 32C0C, 0,55KW, 1430r/min, - Bore for shaft D30mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Decorker, Fabr. Rink, Type: KM 670/2K as box uncorker, 2-head, 2,000 K/h, clock machine Running direction: li->re with decorker plate for 24 module box 0.33 lt, box longitudinal run attached control cabinet in VA with Siemens S7-300 control and operating module OP-Siemens

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

Nibbling machine, nibbler, nibbler, tin snips, circular shears -Power: 1800 watts -Voltage: 220 V -Max. Cutting capacity: 4.5 mm -Dimensions: 570/220/H250 mm -Weight: 10.5 kg

Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 68 mm -large recess: Ø 70 mm -Dimensions: Ø 125/H49 mm -Weight: 0.4 kg

Weibert JTS-600XL-T Circular table saw Cutting length: max. 1600mm Power 2.5KW 400V 50HZ Saw blade Ø: 250mm Saw blade bore Ø: 30mm Cutting height 90°/45°: max. 80/54mm Cutting width: max. 610mm Sliding slide: 1600x240mm Sliding table stroke: 1700mm Machine table: 800x350mm Table widening: 800x270mm Table extension: 415x350mm Swivel range saw blade: 90-45° Speed saw blade: 4000 rpm Suction connection Ø: 100mm Weight: 170kg G&JET-100070XLT

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 5 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.28 kg

Power line filters -Rated voltage: 480 VAC -Rated current: 63 A. -Dimensions: 280/160/H75 mm -Weight: 4.5 kg

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

PLC control, digital input, digital input -Manufacturer: SIEMENS -Type: Simatic S7 6ES7 421-1BL00-0AA0 -Dimensions: 25/210/H290 mm -Weight: 0.81 kg

Dear's Sale, used 2 complete engine WARTSILA 6R32D Brgds Hakan KUSCU +905323642509

-Granulator with sound insulation -Working width: 600 mm -Rotor diameter: 400 mm

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Wauquier, coolant pump type 5/69300 305 P -Power: 0.15 kW/2800 rpm -Delivery rate: l/min -Immersion depth: 205 mm -Dimensions: 200/230/H400 mm -Weight: 12.6 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 690 x 700 mm -T grooves: 5 pieces 28 mm -Number: 1x table available -Dimensions: 690/700/H693 mm -Weight: 360kg

Machine light, machine light, work area light, system light, compact light, switch cabinet light -Manufacturer: steel, compact luminaire with glued-on escape sign -Type: C-LUX 6500/1081 -Voltage: 230 V -Fluorescent lamp: 1x 8 watts -Dimensions: 445/110/H190 mm -Weight: 2.1 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: Siemens, braking resistor -Type: 6SE6400-4BD16-5CA0 -Power: 13 kW -Dimensions: 185/185/H285 mm -Weight: 4.0 kg

6 Pockets, 2 Knives

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. Th ...

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 690/400 V 50 Hz 150/1 A 0-150 kW -Number: 4x devices available -Price: per piece -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece