127,850 used machines on RESALE, but how to find them? Machine Search
L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw
Komatsu 6D95L-1, 6-cyl. Diesel engine water cooled, 4,900 cc displacement, complete, runs. Diesel engines 1-6 cyl., various products: Deutz, Daedong, Hatz, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5 kw upwards, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors.
Light barrier, light grid, PSEN op4F-A-14-090/1, 631004, Pilz, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € _____. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
Rotary vane vacuum pump Manufacturer: Becker Type: U4.630 SA/K o. F/K Vacuum: 3 mbar - 0.5 mbar motor: 15KW Status: used, tested! The general recreation for the Geraet is offered separately! Inclusive: oil filling, vacuum intake filter delivery time: from stock!; ready for use
Fuel oil tank, storage tank, steel tank, diesel tank, tank system with 60,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, cleaned, overhauled and equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011 - steel blue. L = approx. 12.80 m / D = 2.50 m / weight approx. 11.5 tons. ...
Light barrier, light grid, PSEN op4F-A-14-120/1, 631006, Pilz, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € _____. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
Type Junior 640 Motor power 3 kW Blade diameter 350 mm Motor arbor 30 mm Blade speed, rpm 2800 rpm Max trimming capacity: 860 mm Depth of cut with motor at 45? mm Depth of cut 90?: 110 mm Table dimensions 1050?690 mm Saw the angle 0? +45? -45? Made in Italy Transport dimensions Weight 180 kg
Light barrier, light grid, PSEN op4F-A-14-105/1, 631005, Pilz, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € _____. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.
approx. 100.16 running metres, H: 650cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial shelves, shelves immediately from stock Data: H : approx. 650 cm D : approx. 110 cm L : approx. 100,16 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR65 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 37 x stand approx. 650 cm x 110 cm, disassembled. 216 x traverse approx. 270 x 14 x 5 cm, D30. 432 x locking pins. Levels: Floor + 3 432 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 16.000,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / n ...
approx. 36,30 running metres, H: 650cm, Compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 650 cm D : approx. 110 cm L : approx. 36,30 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR65 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 14 x stand approx. 650 cm x 110 cm, disassembled. 78 x traverse approx. 270 x 14 x 5 cm, D30. 156 x locking pins. Levels: Floor + 3 156 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 5920,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.
approx. 19.60 running metres, H: 650cm, Compartment load: 3000 kg, pallet racks, heavy-duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 650 cm D : approx. 110 cm L : approx. 19,60 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR65 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 08 x Stand approx. 650 cm x 110 cm, disassembled. 42 x traverse approx. 270 x 14 x 5 cm, D30. 84 x locking pins. Levels: Floor + 3 84 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 3280,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per pi ...
Type DTW-60A Horizontal three axis Brush roll height 300/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1220x720x900 mm Weight 150 kg
approx. 14 running metres, H: 650cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 650 cm D : approx. 110 cm L : approx. 14 running metres Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR65 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 06 x Stand approx. 650 cm x 110 cm, disassembled. 30 x traverse approx. 270 x 14 x 5 cm, D30. 60 x locking pins. Levels: Floor + 3 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 2400,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece. ...
Fine grinding plant consisting of: Alpine 630 AFG fluidized bed counter-jet mill (V ges: 885 dm3, 10 bar pressure-shock-resistant, saerterrad fold-out), feed station, cyclone, 2 pcs. EX-protection valve, control cabinet and 4 pieces of product buckets. Previous use: Grinding of toner. The system can be inspected in a disassembled condition. Available at an additional cost: Dust filter Bühler PGFG 60/18 (39 m2 filter area).
approx. 11,20 running meters, H: 650cm, Compartment load: 3000 kg, pallet racks, Heavy duty racks, High racks, Industrial racks, Shelves immediately from stock Data: H : approx. 650 cm D : approx. 110 cm L : approx. 11,20 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR65 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 05 x Stand approx. 650 cm x 110 cm, disassembled. 24 x traverse approx. 270 x 14 x 5 cm, D30. 48 x locking pins. Levels: Floor + 3 48 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1960,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per pi ...
Properties Used MULTI PANEL Simatic dimensions: Total height with monitor: 1,620 mm Height without monitor: 1,100 mm Control cabinet Height: 500mm Width: 540mm Depth: 240mm > b > monitor Height: 310mm Width: 400mm 1 STK. in stock
Type: 751 carton sealing machine top Type: 651 carton sealing machine below Machine is to the close of folding cartons with tape (top/bottom).
approx. 8.40 running metres, H: 650cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 650 cm D : approx. 110 cm L : approx. 8,40 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR65 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 04 x Stand approx. 650 cm x 110 cm, disassembled. 18 x traverse approx. 270 x 14 x 5 cm, D30. 36 x locking pins. Levels: Floor + 3 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1520,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.
Nail series: 34° paper collated Strip nails Wire diameter: 3.8-4.6 mm Nail length: 100-160 mm Working pressure: 5-8 bar Weight: 7.10 kg Magazine capacity: 72 nails + Paper collated Strip nails of 4.6 x 160 19200 piece (600 St / carton, 32 piece box, order No. 140037) Compressed air nail machine 1100 EUR, 19200 ships nails 640 EUR
DEAR'S SALE, STD CRANKSAFT ABC 6DXC-720-100A Good condition, report... Liner, Conrod, piston etc.. main parts Brgds Hakan KUSCU +905323642509 info@kscege.com
approx. 5.70 running metres, H: 650cm, compartment load: 3000 kg, pallet racks, heavy-duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 650 cm D : approx. 110 cm L : approx. 5,70 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR65 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 03 x Stand approx. 650 cm x 110 cm, disassembled. 12 x traverse approx. 270 x 14 x 5 cm, D30. 24 x locking pins. Levels: Floor + 3 24 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1080,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.
Ground precision ball screw, D50 x 10/6mm, 892 mm, Eisenmann, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 20070616, D50 x 10/6 mm, 892 mm, Ball screw diameter 50 mm, Pitch 10 mm, Length of thread 615 mm Length of ball screw nut 164 mm, Max. total stroke 451 mm, Total length of the spindle 892 mm Diameter for coupling with motor 40 mm Diameter bearing seat A 40 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit d ...
10,06 running meters shelf racks, 60cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 10,06 running meters Shelf offer 10,06 running meters consisting of: 11 x stand approx. 200 x 60 cm, disassembled (incl. 2 x foot & 2 x cover cap). 50 x base approx. 100 x 60 cm. 200 x shelf holders. 11 x diagonal 1176 mm ( for crossing ). 11 x turnbuckle (for crossing). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1422,00 € net ...
Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight approx 9 T
30,06 running meters shelf racks, 60cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 30,06 m Shelf offer 30,06 running meters consisting of: 31 x stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 150 x floor approx. 100 x 60 cm. 600 x shelf holders. 31 x diagonal 1176 mm ( for crossing ). 31 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 4199,00 € net plus lega ...
5,06 m shelving racks, 60cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 5,06 m Shelf offer 5,06 running meters consisting of: 06 x Stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 25 x floor approx. 100 x 60 cm. 100 x shelf holders. 06 x diagonal 1176 mm ( for crossing ). 06 x Turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 728,00 € net plus legally valid VAT ...
JR Dare Press Plate: 1400mm x 1400mm Daylight 530 mm 4 x rams Ram diameter - 16” Max working pressure - 1500 PSI Clamping tonnage - 600T Platen heating - strip heaters 18KW / platen
used
Crankcase (engine block) Deutz TBG 620V12K
continuous teflon belt grill suitable for thermo oil heated with lower and upper belt - bottom and top grilling belt width 600 mm adjustable speed product height electrically adjustable nett frying length 6.800 mm total length 9.300 mm total width 1.500 mm weight : 5.700 kg
Dear’s Sale, BMZ Man B&W 6S26MC built 1990 engine spare parts Liner, conrod, piston head, jaket, end rod, filter, turning gear, piston etc…. Best Regards Info@kscege
l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw
- 1 x Onyx type 6252 inserting machine Sn. 35226-2 - 1 x main product shuttle feeder typ 289.0400 (signature feeder) - 1 x opening station - 3 x insert feeders - 1 x 'special product' feeder (eg. pen, CD, cosmetic samples etc inserts) - 1 x Safir typ 6270 filmwrapping machine (individual wrapper) Sn. 35226-1 - conveyors
DEAR'S SALE, COMPLETE DEUTZ 6M628 Std cranksaft OVERHAULED , good condition Brgds Hakan KUSCU +905323642509 info@kscege.com
l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw
Rotary vane vacuum pump manufacturer: LEYBOLD Type: SV 630 B and BF Cat. No.: 960863 & 960867 voltage: 50/60 Hz 400V Discharge pressure: 0.8 valid Status: Rebuilt Warranty: 12 months Includes: motor new storage, painting, electrical check Delivery time: In stock; ready for operation
DEAR'S SALE, SULZER 6AL 25/30-630/50 Block,Std cranksaft, liner, piston, pump, cover, etc... good condition Brgds Hakan KUSCU +905323642509 info@kscege.com
RC GROUP GLIDER FREE 630 V2 Y5 Brand:RC GROUP Type:GLIDER FREE 630 V2 Y5 Stock number:M23-4609 Cooling capacity:500 kW Application:Cooling Number of fans:12 Refrigerant:R134a Refrigerant Content:2x 107,5 kg Voltage:400 Volts Dimensions:7484 x 2310 x 2605 mm Weight:7,001 kg Year:2013 Number in stock:2 piece(s) Price:Quotation Request Description: Nice air-cooled RC Group water chiller with 2 screw compressors distributed over 2 cooling circuits. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C (Q= 602 kW at Tw= +15/10°C and Tamb= +40°C). Free-Cooling: Q= 536 kW at Tw= +15°C and Tamb= 0°C. Visit our website: used-refrigeration
Rotary vane vacuum pump manufacturer: Becker Type: U4. 630 SA/K o F/K Vacuum: 3 mbar - 0.5 mbar Motor: 15KW status: used, tested! The General overhaul for the device will be sold separately! Including: oil, vacuum suction filter Delivery time: In stock!; ready for operation
<b>Properties:</b> Used telescopic belt conveyor Condition: fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed Color: Blue Incl. feet Incl. control cabinet Incl lighting Optically and technically very well worked up! <b>Telescopic belt conveyor</b> The telescopic belt conveyor is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation of telescopic belt conveyors can promote sensitive and different-sized containers, boxes or other packaging and article units to the task or place of delivery and, for example, also serves as a connecting route before or between production and machinery. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. <b>Technical data:</b> Retr ...
used
tool adaptor: VDI 40 weight: . kg material: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FOR SALE... COMPLETE ENGINE STORK WARTSILA DIESEL 6SW 280 TO WHOM IT MAY CONCERN; WE VE COMPLETE ENGINE STORK WARTSILA 6SW 280 AT OUR STOCK PLS FIND ENGINE SPEC AT BELOW MODEL 280 6SW YEAR OF BUILT 1999 NUMBER 13098 POWER 1470kW RPM 750 MADE IN THE NETHERLAND ENGINE READY TO TRANSPORT EX STOCK. BESIDES WE VE ALSO MANY MAJOR PARTS OF THIS ENGINE CYLINDER HEADS / PISTONS / CON RODS ETC .. IF YOU'VE ANY FURTHER QUESTIONS PLS DONT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST OF regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY
Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm
Length 300/600 mm Width 72 mm Roughness P240/P320 Holder 4,5 mm Price 0,87 Eur/1 pcs. (300) (EXW Jonava, Lithuania) Price 1,74 Eur/1 pcs. (600) (EXW Jonava, Lithuania)
Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available
used
Handtmann VF 616 + PLH 216 hanging line Z-Version”, consisting of vacuum filling machine Handtmann VF 616, with linking device 34-5, for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar, including Handtmann hanging line PLH 216 with casing holding device 216, and hanging unit 241-16 and 216-22, all machines will be refurbished after confirmation of order.
Technical details drive: - Propulsion: Yanmar L100N - Starter: E-start (starter) - Number of cylinders: 1 - Fuel type: Diesel - Fuel tank capacity: 24 litres - Engine oil: 1.65 litres - Forced lubrication - Forced cooling - Fuel consumption at 75% load: 1.4 l/h - Sound pressure level (Lp): 67 dB(A) - Sound power level (Lw): 93 dB(A) Technical details Power generator: - Nominal voltage: 230 / 400 V - Apparent power at LTP: 3,200 / 6,900 VA - Active power at LTP: 2.5 / 5.5 kW - Apparent power at COP: 3,000 / 5,600 VA - Active power at COP: 2.4 / 4.5 kW - Generator protection class: IP 23 - Sockets: 1 x 230V Schuko / 2 x 230V, 16A / 1 x 400V, 16A - Protection class of sockets: IP 44 (LTP = time-limited generator power (max. power of the generator within 500 h/year with a continuous operation of the generator of 300 h), COP = aggregate continuous output with unlimit ...
Demonstration machine Manufacturer: Mc INTYRE Dimensions (L x W x H): 3200 x 1000 x 1800 mm Blade length: 640 mm Blade opening: 355 mm Cutting capacity: 240 tons Rods ST 37: 88 mm diameter Number of strokes at ¼ opening: 60 / min Number of strokes at full aperture: 8 RPM Weight: 4000 kg Drive: 18,5 kw / 400 V Control: foot pedal
maximum number of results exceeded
please refine your search
