heidelberg 102 6 used for sale

Consisting of base plate diameter 45 cm and column diameter 7.6 cm, height 66 cm for self-assembly, without table top Auction-ID: A1-46501-739

Stainless steel screw with drill tip and molded thread made of hardened steel Auction-ID: A1-46501-2174

Original Kanuk Turbo 2 workshop stove for carpentry etc. approx. 1.30m long x 0.60m wide x 1.10m high with blower with ash bucket, with air distribution pipe, with chimney connection technical data see nameplate under pictures good condition 2.5 years old Loading onto trucks and dismantling subject to a fee Auction-ID: A1-46501-2026

working machine, start and mower deck switches on. Auction-ID: A1-40137-287

As good as new Bohle UV Adhesive Auction-ID: A1-46501-2209

Auction-ID: A7-46479-42

Auction-ID: A1-46501-2134

Equipped with: drawbar coupling, drawbar drawbar, top link, 2x double-acting hydraulic valves, 1x hydraulic single-acting valve, work lights, fender control, 3x hydraulic valves front, front linkage, beacon Auction-ID: A1-40137-34

water pump with petrol engine, 80mm connections, capacity 60M3/hour, unused Auction-ID: A1-40418-507

This is a plot with approximately 60m2 of flat asbestos-free cement sheets dimensions: 250x110x0.6 cm Auction-ID: A1-40137-364

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-58

Compressor Schneider as good as new, only 47 and a half operating hours, only used at trade fairs no continuous operation Technical Specifications & Highlights Capacity: approx. 500 l/min suction capacity (approx. 350-400 l/min delivery volume). Pressure: Max. 10 bar. Container: 60 litres (horizontal, mobile). Drive: 400V three-phase (D-model) – provides a powerful start-up and is more efficient than 230V models. Speed: V-belt-driven 2-cylinder unit with low speed (smooth running, less wear). Auction-ID: A1-46501-271

Around 6cm, 250cm long, unused Comes as a package Auction-ID: A1-40418-451

Equipped with: Air conditioning, front linkage, PTO, crawler gear, suspended front axle, suspended cab, 135 hp, PTO: 540/540E/1000/1000E, 6. Cylinder, Auction-ID: A1-40137-25

Bosch professional (blue) L-Box GKF 600 Professional 220 Incl. various milling cutters in a set incl. various accessories see pictures Auction-ID: A1-46501-808

23 Coils 400 m each Operating temperature 105° Diameter 6 mm Thickness 0.6 mm Auction-ID: A7-46479-37

Equipped with: foil, swivel function, lift function, Max 1500kg lift capacity Auction-ID: A1-41995-100

67.5 Watt; of which 2 glass panel cracked; panel size 1200x600 mm; including pallet; Auction-ID: A1-40418-95

Equipped with: PTO speed 540/540e/1000, 2 double valves rear, tow bar, Auction-ID: A1-40137-79

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-3

Around 6cm, 180cm long, unused Comes as a package Auction-ID: A1-40418-449

Power: PTO-driven sprayer; diaphragm pump 75 L/min Operating parameters: Air velocity 38 m/s (137 km/h); fan Ø 712 mm; vertical spray reach up to 8 m; horizontal reach 4 m (each side); 14 nozzles Workpiece capacity: Main tank 2,000 L; rinsing tank 145 L; handwash tank 20 L; orchard & vineyard spraying Supported edges: Orchards, vineyards, tree crops Edge types: Air-assisted spraying; phytosanitary treatment Included equipment: Air conveyor turbine system; diaphragm pump 75 L/min; 14 spray nozzles; OM kit with 4 hand guns; pressure control system; safety valves; rubber couplings; hot-dip galvanized components Compliance: Agricultural sprayer equipment; safety pressure relief valves Power supply: Tractor PTO Year/Manufacturer: Mahindra – AIROTEC TURBO 2000 Remarks: Compact tank design with efficient air distribution; adjustable track width/height; designed for uni ...

48 x different HSK-63A mounts 2 x Ratchets Various milling inserts Auction-ID: A1-46607-81

John Deere 6175R – Year 2018 – 4,037 h – AutoPowr 6-cylinder John Deere engine with 175 hp Stepless AutoPowr transmission, 50 km/h All-wheel drive with sprung front axle (TLS) Load-sensing hydraulic system, 155 l/min 4 double-acting control units (electric) Power Beyond Connector Equipment: Front hydraulics / front linkage Air brake system Rear PTO 750 / 1000 / 1440 rpm Automatic hitch Ball head coupling Cabin & Comfort: Cabin with air conditioning Air suspension seat CommandCenter Display (armrest) Radio / on-board computer Technology: AutoTrac Ready LED work lights (front & rear) Hydraulic cab suspension Tyres: Front: 600/65 R30 (~40%) Rear: 650/85 R38 (~20%) Condition: Used, maintained, ready for use Technically good condition Auction-ID: A7-46606-1003

Technical details Manufacturer: REGLOPLAS (Switzerland) Model: 150S/6/TP20/1K/RT30 Type: Temperature control unit (water / low-temperature oil) Year: 2003 Max temperature: 150°C Heating capacity: 6.5 kW Voltage: 400 V / 3-phase / 50 Hz Current: 11 A Tank volume: 12 L Control: RT30 controller System: Integrated pump, heating element, and internal tank Connections: Process inlet/outlet and cooling water connections Application: Mould temperature control for plastics processing and industrial thermal management Dimensions and weight (approx.) Length: 900 mm Width: 400 mm Height: 900 mm Weight: 120 kg Auction-ID: A7-46498-115

Indoor unit: Remeha Mercuria Ace EA 6kW Outdoor unit: Mitsubishi ODU 6kW R32 Mercuria Ace: - 6kW - COP (+7°C /+35°C) 6kW: 5 - Hot water production up to 60 degrees Celsius - Operational with outdoor temperatures up to - 20 °C - 100% power with outdoor temperatures up to - 10 °C - Can be connected to all HR boilers - Control of multiple heating circuits possible - Cooling possibility - Build-in appendages: open distributor, 3 bar overflow valve, magnetic filter and drip tray. - Circulation pump - Outdoor sensor - Outdoor units pre-filled with refrigerant up to 10 meters of pipe length Condition: new Auction-ID: A1-46359-52

Mention : PLEASE NOTE ! Unchecked products .Unknown operation ! All itmes are sold as is . No complaints or claims will be accepted after purchase. The buyer is invited to view the lots before auction day ! Auction-ID: A7-46458-1038

Golf hook Allimex 6 box of 100 pieces Auction-ID: A1-46359-474

Mounting set of 36 panels East-West 6xO-6xW 3x Consisting of: Supports, End clamps, Intermediate clamps, Bolts, Ballast holders and sheet metal screws (see photos). You must determine / calculate the required amount of ballast yourself, this is not included. Auction-ID: A1-46359-471

Built-in charger Platform height 5.80m, working height 7.80m, platform extendable up to 2.55 m Auction-ID: A1-40377-79

End clamp Allimex Allislide 6 boxes with 100 pieces Auction-ID: A1-46359-479

Indoor unit: Remeha Mercuria Ace EA 6kW Outdoor unit: Mitsubishi ODU 6kW R32 Mercuria Ace: - 6kW - COP (+7°C /+35°C) 6kW: 5 - Hot water production up to 60 degrees Celsius - Operational with outdoor temperatures up to - 20 °C - 100% power with outdoor temperatures up to - 10 °C - Can be connected to all HR boilers - Control of multiple heating circuits possible - Cooling possibility - Build-in appendages: open distributor, 3 bar overflow valve, magnetic filter and drip tray. - Circulation pump - Outdoor sensor - Outdoor units pre-filled with refrigerant up to 10 meters of pipe length Condition: new Auction-ID: A1-46359-51

Viewing by appointment Auction-ID: A1-40377-17

Pöttinger Lion 6002 C Power Harrow Working width approx. 6.0 m Heavy-duty professional rotary harrow for intensive tillage Suitable for high-performance tractors in arable farming Equipment: Hydraulically foldable (transport width approx. 3 m) Robust headstock (rear attachment) Large-dimensioned gearbox Tine field over entire working width Dozer Rail / Side Plates Walterscheid PTO Shaft Technology: PTO drive (540/1000 rpm depending on version) Several rotors with rotary harrow tines Intensive crumbling and seedbed preparation Uniform working depth due to stable construction Can be combined with seed drill technology (seed drill possible) Condition: Used, optically very good condition Auction-ID: A7-46606-1024

Tool trolley with: 46 x Various HSK-63A mounts Auction-ID: A1-46607-59

Grinding length: 800 mm Grinding width: 600 mm Grinding height: 500 mm Grinding wheel: 400 x max. 80 x 127 mm more data: see pictures Auction-ID: A1-46607-44

Workbench with: - 30 x HSK-63A mounts - div clamping devices - div tool Workbench dimensions: Length: 200.5 cm Width: 75.5 cm Height: 87 cm Auction-ID: A1-46607-76

Brand new solar panels. Up to 450W permeability Excellent resistance to fire and in difficult environmental conditions 5,400 Pa snow load and 4,000 Pa wind load (test loads) Lower installation costs with increased power and efficiency. Maximum yield Total nominal power per pallet with 66 PV modules: 29,700 Wp / 29.70 KWp Technical details: Type: monocrystalline. Condition: factory new Efficiency per solar module: 22.5%. Output per solar module: 450 Wp. Total output: approx. 29,700 Wp / 29.70 KWp . Dimensions PV module: 1,762 x 1134 x 30 mm. Weight: approx. 22 kg. Number of units: 66 pieces. Logistical data: Number of pallets: 2 Pallet dimensions: approx. 1,800 x 1,200 x 1,500 mm. Weight: approx. 1600 kg Auction-ID: A1-46601-14

Front linkage Rear hydraulic third point Air brake for trailers Power take-off (PTO) 540/1000 rpm Comfort cabin (air conditioning) Premium air seat with heating Cabin suspension + front axle (TLS) ISOBUS system (compatible with modern machines) Touchscreen monitor (CommandCenter) Joystick + electric hydraulic control Auction-ID: A7-46458-1

Indoor unit: Remeha Mercuria Ace EA 6kW Outdoor unit: Mitsubishi ODU 6kW R32 Mercuria Ace: - 6kW - COP (+7°C /+35°C) 6kW: 5 - Hot water production up to 60 degrees Celsius - Operational with outdoor temperatures up to - 20 °C - 100% power with outdoor temperatures up to - 10 °C - Can be connected to all HR boilers - Control of multiple heating circuits possible - Cooling possibility - Build-in appendages: open distributor, 3 bar overflow valve, magnetic filter and drip tray. - Circulation pump - Outdoor sensor - Outdoor units pre-filled with refrigerant up to 10 meters of pipe length Condition: new Auction-ID: A1-46359-53

Extra options : All around lighting, blue spot front and rear, Non-marking tires, joy stick, beacon, fire extinguisher Auction-ID: A1-40377-49

Brand new solar panels. Up to 450W permeability Excellent resistance to fire and in difficult environmental conditions 5,400 Pa snow load and 4,000 Pa wind load (test loads) Lower installation costs with increased power and efficiency. Maximum yield Total nominal power per pallet with 66 PV modules: 29,700 Wp / 29.70 KWp Technical details: Type: monocrystalline. Condition: factory new Efficiency per solar module: 22.5%. Output per solar module: 450 Wp. Total output: approx. 29,700 Wp / 29.70 KWp . Dimensions PV module: 1,762 x 1134 x 30 mm. Weight: approx. 22 kg. Number of units: 66 pieces. Logistical data: Number of pallets: 2 Pallet dimensions: approx. 1,800 x 1,200 x 1,500 mm. Weight: approx. 1600 kg Auction-ID: A1-46601-72

Kuhn RM 610 R Mulcher – 6.1 m – Year 2024 – New machine High-performance large area mulcher for professional applications Year of Build 2024, New Machine Technical data: Working width: approx. 6.1 m Transport width: approx. 2.5 m Power requirement: approx. 180 – 350 hp Rotor diameter: 630 mm Number of mallets: 68 hammer mallets Back-up roller: Ø 220 mm Machine weight: approx. 3,200 kg Equipment: Hydraulically foldable side panels Robust flail rotor Large-dimensioned trailing roller Three-point hitch Protective flaps and safety devices Kuhn Heavy-Duty Construction Technology & Application: Uniform mulch pattern even with high growth High area performance due to large working width Auction-ID: A7-46606-1017

Mention : PLEASE NOTE ! Unchecked products .Unknown operation ! All itmes are sold as is . No complaints or claims will be accepted after purchase. The buyer is invited to view the lots before auction day ! Auction-ID: A7-46458-1032

Technical data Manufacturer: HERMLE Model: U 630 T Year of Make: 1998 Machine Type: Universal CNC Milling Machine Travel (X/Y/Z): 630 / 500 / 500 mm Tool holder: SK40 Speed range: 20 – 7,000 rpm Spindle power (40% ED): 11 kW Tool positions: 16 Machine weight: approx. 4,250 kg Configuration Control: Heidenhain TNC 410 / TNC 426 Tool changer: 16-fold magazine Coolant device: 120 L tank, 24 L/min at 3 bar Connection: 400 V / 50 Hz, 14 kVA, 6 bar compressed air Auction-ID: A7-46432-20

STRIKO WESTOFEN W 650 SL – Industrial Melting / Holding Furnace General data: Manufacturer: Striko Westofen Model: W 650 SL Machine type: Industrial melting / holding furnace Condition: Dismantled, prepared for refurbishment Technical details: Heating power: 18 kW Maximum temperature: 1000 °C Volume: approx. 540 dm³ Operating pressure: approx. 200 mbar Control systems: Westronics DG control panel Wolling control cabinet Frech interface Included items: Spare heating elements Thermocouples Seals Ceramic components Mechanical parts Furnace accessories Description: Industrial melting and holding furnace STRIKO WESTOFEN W 650 SL designed for metal processing applications. The unit is supplied dismantled with a complete set of spare parts and components, making it suitable for refurbishment or rebuilding projects in foundry environments. Auction-ID: A7-46 ...

Indoor unit: Remeha Mercuria Ace EA 6kW Outdoor unit: Mitsubishi ODU 6kW R32 Mercuria Ace: - 6kW - COP (+7°C /+35°C) 6kW: 5 - Hot water production up to 60 degrees Celsius - Operational with outdoor temperatures up to - 20 °C - 100% power with outdoor temperatures up to - 10 °C - Can be connected to all HR boilers - Control of multiple heating circuits possible - Cooling possibility - Build-in appendages: open distributor, 3 bar overflow valve, magnetic filter and drip tray. - Circulation pump - Outdoor sensor - Outdoor units pre-filled with refrigerant up to 10 meters of pipe length Condition: new Auction-ID: A1-46359-58

Allimex Allislide Mid Clamp 6 boxes with 100 pieces Auction-ID: A1-46359-484

Round Baler New Holland 658 CropCutter Year of Make: 2000 With cutting unit (CropCutter) – suitable for silage, hay and straw Network binding available Pick-up width: approx. 2.00 m Bale diameter: up to approx. 1.80 m Number of bales: approx. 30,000 Equipment: Bale ejector hydraulic pick-up Condition: Used general condition Signs of wear and tear due to age and use functional not tested Auction-ID: A7-46606-1021

Technical details Manufacturer: REGLOPLAS (Switzerland) Model: 300DG/12/FM30/1K/RT50 Type: Thermal oil temperature control unit (dual circuit) Year: 2004 Max temperature: 300°C Power: 27 kW Voltage: 400 V / 3-phase Current: 41 A Tank volume: 15 L Control: Dual RT50 controllers (2 circuits) Application: Mould temperature control, die casting, injection moulding, process heating Dimensions and weight (approx.) Length: 1200 mm Width: 500 mm Height: 900 mm Weight: 200 kg Auction-ID: A7-46498-109