hegla gmbh co used for sale

Frequency converter, frequency converter, drive converter, controller, variable speed drive, converter -Manufacturer: TAE, converter -Type: TA-1 -Mains: 220 V power: 1 kW -Anchor: 170 V field 200 V -Dimensions: 230/140/H95 mm -Weight: 2.0 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive, converter -Manufacturer: TAE, converter -Type: TA-4 -Mains: 380 V power: 4 kW -Anchor: 270 V field 340 V -Dimensions: 230/140/H95 mm -Weight: 2.0 kg

Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor -Manufacturer: TM, contactor -Type: EV3-1 -Voltage: 220 V 50-60 Hz -Dimensions: 110/75/H70 mm -Weight: 0.4 kg

Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor -Manufacturer: TM, contactor -Type: EV3-2 -Voltage: 220 V 50-60 Hz -Dimensions: 110/75/H70 mm -Weight: 0.4 kg

for sale chocolate tanks Capacity 1000 liters and 2000 liters. Heating jacket Stirrer for thick chocolate mass I send photos at the client's request

Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor -Manufacturer: TM, contactor -Type: TR17-1 -Voltage: 220 V 50-60 Hz -Dimensions: 110/75/H70 mm -Weight: 0.4 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive, converter -Manufacturer: TAE, converter circuit board -Type: TA-05KF -Mains: 220 V power: 0.5 kW -Field: 100-200 V -Dimensions: 185/125/H70 mm -Weight: 0.7 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: KEB, Combivert frequency converter -Type: 10.FO.R11-3429 -Input: 330...480 V 50/60 Hz -Dimensions: 340/235/H85 mm -Weight: 4.1 kg

CONVEYOR STATION LORANDI / OLI / SIPA 30/15

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine, milling machine horizontal -Manufacturer: WMW, counter bearing from milling machine FW 400 x 1600 -Dimensions: see drawing in the photos -Transport dimensions: 1505/400/H345 mm -Weight: 370 kg

Control device for electric forklift, electric motor, DC motor, traction motor, drive motor, motor control, motor controller, control, drive control, voltage converter -Manufacturer: Still, voltage converter -Type: 372641 -Voltage: SEC 24 V 16 A/PRIM 48 V-80 V -Dimensions: 185/170/H140 mm -Weight: 4.2 kg

6 denis prive grain silos, D 8 meters, 15 rings a.1.15 m, DIN 1055, catwalks, temperature measurement, Schmidt Seeger trough chain conveyor, elevator etc.

Collar cutting machine, trim, trim collar, shirt collar, shirt production, shirt, pneumatic, textile production, textile machine, garment production, garment production -Kannegiesser System: BRILKA -Kannegiesser: cut and twist collar. -pneumatic: foot switch -Dimensions: 520/900/H1190 mm -Weight: 33 kg

Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Lenze, series 8600 -Type: 8603_E.2D.20 -Input: D 400 -Output: 0-400 V/5.5 A -Dimensions: 330/200/H175 mm -Weight: 6.1 kg

Premix system stainless steel, 30 pieces stainless steel container 600 liters and 400 liters, dosing screws, galvanized steel construction, control cabinet etc.

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Shaft coupling for: splined shaft -Shaft: Ø 40/36 mm, Ø 30/27 mm -Price: per piece -Number: 6 pieces -Dimension: Ø 140 x 105 mm -Weight: 5.8 kg/piece

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Shaft coupling for: splined shaft -Shaft: Ø 25/22 mm, Ø 20/17 mm -Price: per piece -Number: 3 pieces -Dimension: Ø 105 x 76 mm -Weight: 1.9 kg/piece

Complete control cabinet for Jenbacher 316; EXW

Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Siemens, Simodrive -Type: 6RB 2101-2A-Z -Overall dimensions: 300/460/H240 mm -Weight: 18 kg

Conveyor Belt, Belt Conveyor Belt, Conveyor Belt, Belt Conveyor, Chain Conveyor, Pallet Conveyor Belt, Pallet Conveyor -Drive: geared motor SEW-Eurodrive with brake 0.55 kW/15 m/min -Weigh cell: Bizerba HLC-C3 -Chain track width: 750 mm -Dimensions: 1995/990/H480 mm -Weight: 334 kg

Rear silencer, exhaust system, muffler, silencer, charger carburetor, radiator -Manufacturer: Opel, water cooler -Type: unfortunately not known -Hole spacing: lengthways 280 mm/crossways 445 mm -Dimensions: 460/165/H450 mm -Weight: 5.1 kg

- According to layout bottle transporters - According to layout carton transporter - With central control

PLC control, electronic module -Manufacturer: Siemens -Type: Simatic S7/6ES7 -Modules: see photos -Price: per assembly -Number: 5 available -Dimensions: 170/220/H75 mm -Weight: 1.2 kg/piece

PLC control, electronic module -Manufacturer: Siemens -Type: Simatic S7/6ES7 -Modules: see photos -Dimensions: 160/105/H75 mm -Weight: 0.5 kg

Connection line, connection cable, data line, bus cable, signal line -Manufacturer: Siemens signal cable in original packaging -Type: 6FX8002-2DC20-1ABO -Quantity: 1x available -Price: piece -Dimension packed: 245/190/H30 mm -Weight: 0.2kg

Bickel MPA 65 Electronically controlled Stamp Perforating machinePerforation of postal stamps, tokens, calendars. Size 900 x 650 mm with lot of tools.SCC control and positioning over monitor. Automatic central greasing. List of tools: base tools - 35,5 mm 48,28 mm 24,14 mm Perforation only with line: 48,28 mm round (big)- Ø35,5 mm 35,5 mm round (small) – Ø24,14 mm 48,28 x 40,53 mm shape of hart 48,28 mm with protection of romb 35,5 mm with protection romb Closed sizes: 48,28 x 24,14 mm 35,50 x 25,56 mm 35,50 x 29,82 mm Age: 1992 Machine tehnicaly controled/ checqued. Cleaned. With machine there is automatic delivery and jogger.

aschinella details Warehouse number 1105-03533 Machine Type Machining Center - Vertical Make MAZAK Type VTC 20 B Year of construction 1996 Control type CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from location Price Technical details x-travel 1120 mm y-travel 510 mm z-travel 510 mm Tool changer 30 compartment Information Control Mazatrol M PLUS 1X 24 COMPARTMENT TOOL CHANGER SPAERNEFOEDERER With CNC control Mazatrol MPLUS , 24-fold tool changer, With CNC control Mazatrol M PLUS , ATC for 24 tools Technical data / technical details: Travel X / X-Travel 1120 mm Travel Y / Y-Travel 510 mm Travel Z / Z-Travel 510 mm Table size 1460x510 mm table load / max. workpiece weight 800 kg Tool shaft / spindle taper SK40 Speed range infinitely variable / spindle speed stepless 40-10000 rpm Number of tool places in ATC ...

Control card, control, PLC control -Manufacturer: Homatic -Type: CPU SPS-II 2-083-01-5053 -Dimensions: 190/40/H260 mm -Weight: 1 kg

Cooking kettle Fessmann Nova 400, 400 liters, gas heated, MC control, stainless steel version,

Oil-water separation system, condensate separator, oil and water separator, oil separator -Oil-water separation system: oil and water separator -Dimensions container: Ø 500 x 755 mm -Dimensions: Ø 585 x 1145 mm -Weight: 31kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Kracht -Type: TK21/150 -Power: 0.1 kW -Speed: 2800 rpm -Connection: 220/380 volts -Dimensions: 160/240/H340 mm -Weight: 10 kg

MANUFACTURER: Niro Atomizer CAPACITY: 1.183 Kg/h, , APPLICATION: Milk powder and whey powder production. MACHINE COMES WITH: External vibro fluid bed dryer, Niro F35 atomizer, powder cyclones, bag filters, air pre heating economizer unit, air heating unit with steam heat exchangers, vibro sieve powder calibration unit, air ventilators, air locks, rotary valves and many accesories...

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Forst-Enor, switching pump RSWV40 -Motor: AEG -Power: 4 kW -Speed: 1420 rpm -Delivery rate: 40 l/min -Dimensions: 2000/455/H500 mm -Weight: 156 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Hollow shaft: Ø 40 mm -Dimension: Ø 130 x 80 mm -Weight: 5.5 kg

Computer monitor, operating unit, operating unit, keyboard, screen, control, industrial monitor -Manufacturer: Cybernet -Accessories: swivel arm, multiple adjustable -Dimensions: 600/200/H365 mm -Weight: 10 kg

Make MBO. Model K820-4KZ Year 1994/1995 Size Min: 150 x 210 mm / Max: 820 x 1200 mm Feeder MBO F820 Flatpile feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt Folding configuration 4 platebuckles + 2 knives with exit to left or right + MBO Z knife for 32 pages Delivery Lega 30/55 pressing upright delivery Details Vacuum pump, noise hoods, batch counter

Connection line, connection cable, data line, bus cable, signal line -Manufacturer: Chainflex, data cable with plug -Type: CF11.006.D Art.-Hst. 6FX8002-2CA34-1,3M-I -Length: 1.3 m -Weight: 0.4 kg

Conveyor belt rollers, transport rollers, spare rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 60 mm -Admission: M10 -Price: per piece -Number: 2 pieces -Dimension: Ø 60 x 700 mm -Weight: 2.1 kg/piece

PVS 125 H i Mirco-cut Colloidmill -Ultra-fine shredder 1 Models 11 KW 15 KW and 22 KW

CNC control, control panel, LCD, keyboard, touchscreens -electronic handwheel -Manufacturer: NEC -Type: NL10276AC30-03L -Type: 150PW072-C -Dimensions: 400/645/H485 mm -Weight: 22 kg

Available with 350, 450, 500 and 820 tons cutting force. Continuous work Drive: Electric motor Motor New machine Field of application as follows: -Scrap -Windows and doors made of aluminium and plastic -Alu varieties -Types of wood (pallets, cabinets, industrial wood, more) -Mixed scrap -Bulky waste -more approx. 6 months delivery time after order Further information on request For a written offer, please write an email with your company details and address

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, sorting belt, sorting conveyor belt, readout conveyor belt -Side walls made of: stainless steel -Speed: 118 m/min -Drive: 0.75 kW -Belt width: 590 mm -Length: 2000 mm -Transport dimensions: 4360/1170/H1170 mm -Weight: 684 kg

Hydraulic motor, oil motor, hydraulic pump, compact rotators, oil-hydraulic drive -Manufacturer: Thumm, oil hydraulic drive Type 211 -Mounting holes: Ø 30 mm -Dimension: Ø 175 x 320 mm -Weight: 23 kg

Machine Details Warehouse number 1105-03531 Machine Type Machining Center - Vertical Make DMG DECKEL-MAHO Type DMC 64 V linear Year of construction 2002 Control type CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from stock Technical details x-travel 640 mm y-travel 600 mm z-travel 500 mm Table size 850 x 600 mm Spindle holder ISO 40 Speed range 0 - 12000 rpm Rapid traverses - longitudinal/transverse/vertical 30 m/min Number of tool magazine slots 30 Information CNC control heidenhain tnc 530 30X SK 40 MAGAZINE ELECTRONIC HANDWHEEL MACHINE IN GOOD CONDITION WITH SPAENEFOERDERER

Machine Details Warehouse number 1105-03545 Machine Type Machining Center - Vertical Mori SEIKI brand Type MV 40 B Year of construction 1991 Control type CNC Controller (FANUC 16M) MSG M 4 Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from stock HAGUENAU FRANCE Price Technical details x-travel 800 mm y-travel 410 mm z-travel 510 mm Controller (FANUC 16M) MSG M 4 Rapid traverse X-axis 20 m/min Rapid traverse y - direction 20 m/min Rapid traverse Z-axis 15 m/min Table area 1150 x 450 mm Tool holder BT 40 Number of tool holders 30 tool diameter 80 mm tool length 250 mm tool weight 8 kg Speed range 10000 1/min Total power requirement 5.5 / 7.5 kW Machine weight approx. 6 t Information SUPER MACHINE CNC MORI MSG M 4 FANUC 16 WITH 4 AXIS NIKKEN

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -LUCB05BL: control unit -LUB12: basic device -Price: per piece -Number: 16 pieces -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/piece

Machine Details Warehouse number 1105-03546 Machine Type Machining Center - Vertical HARTFORD brand Type VMC 1230 Year of construction 2000 Control type CNC Control FANUC 18 M Storage location HAGUENAU Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1230 mm y-travel 610 mm z-travel 610 mm Table clamping surface 1400 X 610 mm Speed range - milling 60 - 8000 rpm Control FANUC 18 M Drive power - Milling spindle 11 kW Tool holder BT 40 Number of tool magazine slots 30 stations Feed range 1 - 10000 mm/min Rapid traverses: 20 m/min Total power requirement 25 kW Machine weight approx. 9800 kg Space requirement approx. 3300x2700x2600 mm Accessories Full protection - fairing Complete machine documentation Central lubrication RS 232 - Data Interface Information very nice only working in aluminium CONTROL FAN ...

1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005

Compressed air diaphragm pump from Tapflo TR20 TTT including maintenance unit and solenoid valve, sand: ready for operation, good condition Price net from stock

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN32 -Width: 180 mm -Nominal pressure: PN10 -Dimensions: 180/140/H210 mm -Weight: 6.1 kg