133,994 used machines on RESALE, but how to find them? Machine Search
Spiral conveyor from Apollo, infeed at approx. 6.42m / discharge at approx. 1.09m, approx. 40cm wide conveyor line – used -: Ex-site price (net): only 5.950.-€, dismantled, packed and loaded! Manufacturer: Apollo Type: SPC 1500-400-A4-6T Year of Make: 2016 Width of the conveyor belt: approx. 40cm Height of the point where the conveyor system enters above: approx. 6.42m Height at the sluice: approx. 1.09m Diameter spiral: approx. 2m SPC 1500-400-A4-6T Chain length (m) 37.5m Serial No. 562044-100 230/400V / 50 Hz, 2.2 kW Speed (at Min): 40m/ min IP54 Load 6.4kg/m Condition: good – very good Available: immediately Location: Frankenberg camp / Saxony
used
Belt width: variabel Belt length: bis 14000 mm Total belt loading: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
connection: G 1/4 adjustable from - up to: 0,7 - 8 bar weight: 0,86 kg high flow pressure regulator body material: zinc alloy withour gauge manual included 10 pieces on stock! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width: 395 mm length: 2960 mm output height: 130 mm efective widths: 385 mm Pole center: 400 mm drive motor: Drehstrom The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 315 mm cutting diameter: 85 mm stroke: mm mitter cutting - all-position: ± 45 ° turning speed range: 19 / 38 1/min power requirement: 0,75 / 1,5 kW coolant: voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 235 kg dimensions of the machine ca.: 0,55 x 0,90 x 1,75 m - Coolant device - Machine base - without circular saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 55 mm : M 30 : M 36 : MK 4 spindle turning speed - stepless: 70-1.200 U/min spindle stroke: 140 mm throat: 300 mm column diameter: 145 mm : 615x430 mm distance spindle /table: min./max. 150/735 mm : 2 x 14 x 224 mm feed: 0,1 + 0,3 mm/U Machine height: 1850 mm weight: 380 kg drive motor: 1,8/2,9 kW Standard equipment: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse Item 20.1 Thread cutting device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Thread cutting performance dependent on spindle speed) ! NEW FOR YOU AS A SERVICE ! Machine leasing up to 60 months without down payment, without residual value, personal advice and individual leasing rate calcu ...
Roller conveyor curves/ 90 degree curves -motorized Year of Make: 2016 Manufacturer: Soco System Condition: Used Model: Castors with drive Type: 90 Degree Curve Total width outside: approx. 2000 mm Total width inside: approx. 230 mm Total width incl. motor: approx. 1000 mm Total width without motor: approx. 830 mm Conveyor width: approx. 810 mm Roll width: approx. 610 mm Inner radius: approx. 600 mm Material: Steel/ Plastic Color: Galvanized/ Black/ Blue Including 2 motors Soco System (0.12 KW) Including side guide outside: approx. 190 mm high Includes 2 feet (height adjustable) Stock: 4 pieces Price per piece Internal Article Number: 2026021102 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your ...
Roller conveyor/conveyor/rollers -with drive Manufacturer: Schäfer Model/Type: Peem Year of manufacture: 2010/2011 Drive type: 24 volt belt drive Total length: approx. 50817 mm Total width: approx. 505 mm Conveyor width: approx. 420 mm Facility consists of: 24 segments: approx. 1890 mm 1 segment: approx. 2070 mm 1 segment: approx. 2430 mm 1 segment: approx. 810 mm 1 segment: approx. 630 mm 1 segment: approx. 540 mm Wheelbase: approx. 90 mm Roll diameter: approx. 50 mm Steel frame Frame height: approx. 95 mm Including Quatronic-3PK-IEC-G2-2xAS (11 pieces) Feet to be ordered separately Price per meter Internal Article Number: 2026021104 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your i ...
bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm spindle taper MT: 3 column diameter: 115 mm table surface area: 514 x 360 mm spindle turning speed - stepless: 160 - 2250 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 0,285 t dimensions of the machine ca.: m Condition: new / unused: The machine can be viewed under current.: 37981 400 V, 50 Hz, colour: light grey RAL 7035 continuous speed control, digital speed indication, push button for emergency switch off, turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso. operation manual, wiring diagram. Machine has been checked in our workshop, including electr. testing report. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
aschinella details Warehouse number 1105-03380 Machine Type Machining Center - Vertical Sigma brand Type MISSION 2 Year of construction 2002 Control type CNC Control FANUC 18 M Storage location FRANCE Country of origin Italy Delivery time by arrangement Freight base from location Technical details x-path 750 mm y-way 400 mm z-displacement 450 mm Table clamping surface 900 X 400 mm table load 600 kg Tool holder SK-40 ( DIN 69871-A) Speed range 6000 rpm Spindle pitch 15 kW torque 191 Nm Spindle cooling with cooling agregat Tool magazine with TELLER MAGAZINE Places in the tool magazine 16 pieces( RANDOM) Suit bolts DIN 69872-A Control FANUC 18 M Information Accessories: NC STEUREUNG FANUC 18 M
Specially designed for small businesses and rim coaters. Plant complete consist of: Powder furnace width X height x depth 1200 x 1600 x 1200 mm 15 KW Powder cabin width X height x depth 2000 x 2240 x 920 Latest powder gun from romer ProfiGun PM-1 All together for 10,900.00 net plus freight costs and assembly Delivery time approx. 16 weeks.
Telescopic Conveyor/Conveyor Belt/Telescopic Belt Conveyor -18 meters long Manufacturer: Podner Fördersysteme Condition: used Model: Belt/ Unloading Telescopic Conveyor Length retracted: approx. 7650 mm Length extended: approx. 18740 mm Total width incl. control cabinet: approx. 1200 mm Total width without control cabinet: approx. 920 mm Belt width: approx. 600 mm Strap type: smooth Conveying height: approx. 750 mm (incl. shims) Including control cabinet Including SEW motor: 2.2 KW and 0.55 KW Wiring diagram included Internal Article Number: 2026021105 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined convey ...
Bartscher combi steamer for 2/3 GN shells, with core temperature probe, with 3 flat 2/3 GN shells and 3 deep 2/3GN shells (see photos), 4 shells of which are new. Current: 230V/50Hz, 2.5 KW with operating instructions
1 of used feeder system with vertical delivery, make Pfankuch, type ASB-175 KR (control unit right), with VS 2000 controller, new 1999, product width min/max 47/105 mm, product height min/max 55/300 mm, speed max. 115 m/min (depending on product). Mulitvoltage 90-240V, 50-60Hz, 0.4 KW. Servo driven. Last used to feed coupons 95 x 74 mm at a speed of 120 coupons/minute.
1 of used feeder system with vertical delivery, make Pfankuch, type ASB-175 KL (control unit left), with VS 2000 controller, new 1999, product width min/max 47/105 mm, product height min/max 55/300 mm, speed max. 115 m/min (depending on product). Mulitvoltage 90-240V, 50-60Hz, 0.4 KW. Servo driven. Last used to feed coupons 95 x 74 mm at a speed of 120 coupons/minute.
Roller conveyor/conveyor/rollers Manufacturer: Schäfer Year of manufacture: 2010/2011 Drive Type: Gravity Total length: approx. 4330 mm The plant consists of 2 segments: Segment length: approx. 2165 mm Total width: approx. 505 mm Conveyor width: approx. 420 mm Wheelbase: approx. 90 mm Castors are made of plastic Roll diameter: approx. 50 mm Steel frame Frame height: approx. 95 mm Frame width: approx. 40 mm Feet to be ordered separately Price: per meter Including side guide Internal Article Number: 2026021106 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloa ...
Complete PET filling line Krones / Sidel Capacity: 33.000 bph Bottle size: 1,5 ltr. PET bottles Closure: short neck PCO 28 - 1881 Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm) Filling products: carbonated water and soft drinks Year of manufacturing: from 1997 - 2014 Condition: regulary maintained The line is out of production and immediately available. The line can be inspected. The line is consisting of: Blowing machine Sidel SBO 20 Serie III capacity: 36.000 bph year of manufacturing: 2010 neck size: PCO 28 - 1881 incl. cooling unit Trane-RTAC 185 year of manufacturing: 2003 incl. preform feeding: SIDEL-EBHS 2050 year of manufacturing: 2010 preform container: SIDEL-EBHS 2050 year of manufacturing: 2010 incl. preform tilting device SIDEL-EBHS 2050 year of manufacturing: 2010 incl. air conveyor system available Air co ...
aschinella details Warehouse number 1105-03398 Machine type machining center - Universal HERMLE brand Type C 800 P Year of construction 1999 Control type CNC Control HEIDENHAIN TNC 430 0 Storage location HAGUENAU Country of origin Germany Delivery time by arrangement Freight base from location Price Technical details x-displacement 800 mm y-way 500 mm z-way 500 mm Control HEIDENHAIN TNC 430 0 Spindle diameter 70 mm Spindle speeds 20 -15,000 rpm Spindle holder ISO 40 0 Tool changing device 30-fold 0 Workpiece weight 250 kg Chip conveyor yes 0 Total power requirement 0 kW Machine weight approx. 8.5 t Space requirement approx. 3,260 x 2,210 x 2,930 m Information WITH CONTROL HEIDENHAIN TNC 430 SPARNEFOERDERER TABLE 850 X 500 2 MALL PALLET CHANGER 180°
Machine Details Warehouse number 1105-03409 Machine Type Machining Center - Vertical Brand MIKRON - HAAS Type VCE 1000 VF 3 Year of construction 1998 Control type CNC Control Haas Storage location FRANCE Country of origin USA Delivery time immediately Freight base EXW (Incoterms 2010) Technical details x-displacement 1016 mm y-way 508 mm z-way 635 mm Control Haas Table clamping surface 1219 X 457 mm Rapid speed 25 m/min Table load 1000 kg Speed range 7500 1/min Drive power - Milling spindle 15 kW Number of tools in the magazine 20 pieces Tool holder SK 40 Information IMMEDIATELY FREE IN GOOD CONDITION UNDER POWER
Air compressor Planet Air L 550 with dryer KT 700; good condition; 550L/min.; 10 bar; incl. air dryer KT 700. Compressor Plant AIr AL 550; good condition; volume 550L/min.; 10 bar; with air dryer.
Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dr ...
Cylinder cover Recon The cylinder covers were equipped with the following new parts: - Inlet and exhaust valve guides. - Intake and exhaust valve seats. - Inlet and outlet valves. - Nozzle protection tube. - Rotary device. The cylinder covers were tested with 10 bar water pressure. The cylinder covers were planned. The valves ground in with the seats and mounted with new valve stem seals. Price per piece.
Key data: 7 , 10 , 1
Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor with belt drive Control: fixed speed Control: Airlogic² T touchscreen full-color display Refrigeration Dryer: Integrated Performance data Volume flow at operating pressure 9.5 bar 1.15 m³/min Operating pressure min. / max. 5.5 / 10 bar Total power consumption at 9.5 bar / full load 10.0 kW Rated power motor; IP55 7.5 kW Oil quantity 3.7 lt Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1188 m³/h Free fan pressure 30 Pa Sound level 65 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Dimensions and weight Length x width x height 1625 x 665 x 1535 mm Weight 355 kg Compressed air outlet G 3/4 "ig Capacity compressed air tank 270 lt
Combination laser punching FINN POWER LB6 Year 2003 3000x1500
Key data: 4 , 8
Oil-free scroll compressor Compaction: Spiral compactor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Simple start/stop control Refrigeration Dryer: Integrated, Refrigerant R513A Electric condensate drain included Performance data Volume flow at operating pressure 6.75 bar 0.4 m³/min Operating pressure min. / max. 4.0 / 7.75 bar Total power consumption at 6.75 bar / full load 4.4 kW Rated power motor; IP55 3.7 kW Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 0 / 40 °C ∆ T above cooling medium temperature 0 °C Cooling air requirement 900 m³/h Free fan pressure 30 Pa Sound level 57 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer internally wired Dimensions and weight Length x width x height 1,275 x 690 x 1,450 mm Weigh ...
Frequency converter Combivert F5, 7,5KW, 14F5C1D-380A, KEB, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - The device has been tested and shows no faults. - The operating hours display was locked and could not be read. Technical data: - Combivert F5 frequency converter, 7.5 kW, 14F5C1D-380A, KEB, used - 7.5 kW, 400 V - Without control unit - Contrary to the photo, without cover - incl. power filter Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the bu ...
continuous grilling line completely stainless steel adjustable product height Useful length 1,800 mm Track width 600 mm with bottom and top band: bottom and top contact frying independent temperature control at the top and bottom electrically heated ± 90 kW with belt washing system at the top and bottom Adjustable temperature range per heating plate (6 pieces) Capacity up to 250 kg / hour depending on the product infinitely variable speed Dimensions (L x W x H): ± 3,000 x 1,650 x 2,400 mm
Frequency converter Combivert F5, 5,5KW, 13F5K1D-390A, KEB, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - It may be that the device has been setted as a spare part for its use. - The device has been tested and shows no faults. Technical data: - Frequenzumformer Combivert F5, 5,5 KW, 13F5K1D-390A, KEB, neuwertig - 5,5 KW, 400V, 0-599Hz, - without control unit - with cover - with manual 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the pr ...
Plastic Modular Conveyor / Belt Conveyor / Conveyor Belt with Drive Manufacturer: Jamafa Condition: Used Total length: approx. 5000 mm Total width incl. motor/feet: approx. 1220 mm Total width without motor: approx. 1040 mm Conveyor width: approx. 990 mm Conveying height (height-adjustable): approx. 800 mm Material: Stainless steel/steel/plastic Strap Type: Plastic Color: green, stainless steel Including motor, including feet, height-adjustable, on wheels Frame height: 155 mm Stock: 1 piece(s) Price per piece Internal Article Number: 2026021501 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors o ...
Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober with Original wooden cooling tunnel manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 305 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: 1930 work width: 305 mm different: With origin wooden cooling tunnel, approx. 8m extendable mass container absolutely in original condition ! We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, (EXW)unpacked
Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober antique manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 620 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: maybe between 1930 - 1940 work width: 620 mm different: with wooden cooling tunnel, approx. 8m fixed mass container We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, unpacked
Specification: Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T
complete 230kW
Roller conveyor / work table / conveyor technology with drive Model: Flat Belt Condition: Used Year of Make: 2013 Manufacturer: AMI Fördertechnik Total length: approx. 3250 mm Total width: approx. 540 mm Conveyor width: approx. 465 mm Castors/ center distance: approx. 125 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Including 2 SEW motors (0.37 KW) Including side guide Feet to be ordered separately Stock: 10 pieces Price per piece Internal Article Number: 2026021902 Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, ...
Connecting rod without connecting rod head MAK M43C Recon Crack tested using Magnaflux process. Testing for parallelism of the connecting rod bearing holder and the connecting rod head revealed a deviation of less than 0.01 mm. Connecting rod bearing holder in the brushed state 0.01 mm. Connecting rod is sold as shown. MAK Part Number: 432810-100
Betschart Swiss Transformer Core Testing System KPA 15 Function The output voltage, which can be infinitely adjusted by hand by means of a rotary knob, is guided directly to the excitation coils of the test core. In this way, an electromagnetic field that is as homogeneous as possible is to be built up in the air gap of the test core, with which nuclear material inserted in the air gap can be characterized. The basic operation of the core test system is carried out via the switching and display elements on the front panel at the front of the test trolley. Specifications Input voltage : 2 x 400 V – 50/60 Hz Input current : 38.3 A maximum Output voltage : 0 ... 230 V Output current : 65 A maximum Measurements : Rotary iron voltmeter 0 ... 500V for input voltage Rotary iron voltmeter 0 ... 250V for output voltage Rotary iron Ampèremeter 0 ... 40/80A for input current Rot ...
process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3- 105 kW Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial ...
New airend BOGE BA 30 as a replacement for Termomeccanoca SCA10D (TM SCA 10 D) The installation dimensions are the same. BOGE Id.Nr.: 201021766P ( incl. gasket DN 60x D110x 2 and O-Ring-90x3-N-FKM (Viton) 75)
Belt conveyor/ webbing/ conveyor belt Year of Make: 2016 Manufacturer: AMI Fördertechnik Model/ Type: Belt Conveyor Condition: Used Overall length: approx. 1670 mm Total width incl. motor: approx. 700 mm Total width without motor: approx. 530 mm Conveyor width/belt width: approx. 450 mm Frame height: approx. 80 mm SEW motor included Including side guide The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Internal Article Number: 2026022101 Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloadi ...
We offer for sale two pieces MWM TBG 616 V8 K.. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V8 K Rated power: 300 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 600 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 2004 Operating hours: 57,000 h Location: Cologne
Triple flour-collecting screw conveyor in steel design Total length 6.2 m, outlet at 5.2 m Screw diameter 150 mm 1 m counter-rotating thread, slope 105 cleaning flaps, Wooden lid with folding boxes, 2 intermediate bearings each, motor 1.5 kw
SECOND-HAND STAINLESS STEEL COMPRESSED AIR MULTIVAL VALVE BOILERS REF#: C9478 Multivalvula compressed air boilers made of stainless steel of different sizes.
ERD Column Drill Type B35/40 -Manufacturer Ing. Ewald Riens, Junior, Bodenburg via Hildesheim -Machine type ERD B35/40 -Column drilling machine design with gear drive -Drilling performance in steel up to 50 mm -Spindle holder MK 4 (Morse taper 4) -Quill stroke 190 mm -Projection (spindle to column) 325 mm -Column diameter 140 mm -Table size approx. 565 × 565 mm -Table adjustment height-adjustable, rotatable (360°) -Speeds (spindle) 6-stage, manual via belt / lever - 670 / 470 / 295 / 210 / 150 / 90 rpm -Note on speed switching: Switching only in the outlet -Feed types: Manual and automatic feed -Feed speeds 0.1 / 0.2 / 0.3 mm per spindle revolution (switchable during the run) -Motor power 2.2 kW (three-phase current) -Supply voltage 400 V -Cutting speed table SS drill for material ST60 available (operating note) Dimensions: LxWxH: 0.9x0.5x2.05 meters / Weight 800 ...
For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 1500mm Length extended 4000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 4 pieces Other lengths available in stock: 8 and 10m Shipping worldwide Price per piece 4.100€ net plus VAT If you are interested, please contact us to confirm availability.
maximum number of results exceeded
please refine your search
