134,859 used machines on RESALE, but how to find them? Machine Search
bore capacity in steel (diameter): 23 / 28 mm throat: 260 mm bore stroke: 120 mm tool taper: MK 3 table-size: 500 x 350 mm column diameter: 100 mm total power requirement: 1,3 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 800 x 600 x 1750 mm Defective feed! Right-left rotation stepless speed adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power converter / rectifier. techn. details see photos. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power converter / rectifier. techn. details see photos. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Belt conveyor/webbing/conveyor belt 9.77 meters Manufacturer: AMI Year of Make: 2016 Condition: used Total length: approx. 9770 mm Total width incl. motor: approx. 770 mm Total width without motor: approx. 690 mm Conveyor width: approx. 600 mm Belt width: approx. 600 mm Strap Type: Longitudinal Grooves Material: Steel Frame height: 300 mm/80 mm Incl. SEW motor 0.55 kW/r/min. 1360/87 Harness must be fitted on site Internal Article Number: 2026031801 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics ...
Belt Conveyor/Webbing/Conveyor Belt Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt Conveyor Total length: approx. 5050 mm Total width incl. motor: approx. 450 mm Total width without motor: approx. 330 mm Conveyor width: approx. 300 mm Strap Type: Fabric Tape Material: Steel/Aluminum Frame height: approx. 50 mm Incl. SEW motor 0.25 kW/r/min. 1300/400/1600/49.0 Includes speed control Includes 4 feet, height adjustable Internal Article Number: 2026031802 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions f ...
Belt Conveyor/Webbing/Conveyor Belt Manufacturer: Schunk Fördertechnik GmbH Condition: used Model No.: SFT/P50 Total length: approx. 5050 mm Total width incl. motor: approx. 450 mm Total width without motor: approx. 330 mm Conveyor width: approx. 300 mm Strap Type: Fabric Tape Material: Steel/Aluminum Frame height: approx. 50 mm Incl. SEW motor 0.25 kW/r/min. 2660/82.0/3260/100.0 Includes 4 feet, height adjustable Including side guide Stock: 5 pieces Price per piece Internal Article Number: 2026031803 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high ...
used
Belt width: variabel Belt length: bis 14000 mm Total belt loading: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
connection: G 1/4 adjustable from - up to: 0,7 - 8 bar weight: 0,86 kg high flow pressure regulator body material: zinc alloy withour gauge manual included 10 pieces on stock! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width: 395 mm length: 2960 mm output height: 130 mm efective widths: 385 mm Pole center: 400 mm drive motor: Drehstrom The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 199 , 6 , 40
FS Elliot Centrifugal Compressor with inverter starter = 1 unit Model : P300-300 Brand/ Manufacturer : FS Elliot (FSE) Air Quality : Oil-Free (ISO 8573-1 Class Zero) Compression : Three Stages Compression Cooling Method : Water Cooled Motor Power : 415V, 50Hz, 3 Phase Main Motor : TEFC, 415V, 3PH, 50 Hz Motor Type : Inverter type; brand WEG; IE3 Motor Starter : Inverter type, Free Standing Inverter Drive Starter without a line synchronous bypass system. designed and supplied by manufacturer, cable connection from starter to motor shall be supplied by customer or can be quoted separately. Shaft Power : 264.93 hp or 198.7 kW (} 4%) Delivery Air Flow Rate : 40 m3/min (} 4%), based on cooling water inlet temperature 32°C, inlet air temperature 35°C, Relative Humidity 80%. Discharge Pressure : 6.0 barg. Discharge Temperature : 37.3°C Vibration Sensors : 2 sets, Low and H ...
saw blade diameter: 315 mm cutting diameter: 85 mm stroke: mm mitter cutting - all-position: ± 45 ° turning speed range: 19 / 38 1/min power requirement: 0,75 / 1,5 kW coolant: voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 235 kg dimensions of the machine ca.: 0,55 x 0,90 x 1,75 m - Coolant device - Machine base - without circular saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 55 mm : M 30 : M 36 : MK 4 spindle turning speed - stepless: 70-1.200 U/min spindle stroke: 140 mm throat: 300 mm column diameter: 145 mm : 615x430 mm distance spindle /table: min./max. 150/735 mm : 2 x 14 x 224 mm feed: 0,1 + 0,3 mm/U Machine height: 1850 mm weight: 380 kg drive motor: 1,8/2,9 kW Standard equipment: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse Item 20.1 Thread cutting device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Thread cutting performance dependent on spindle speed) ! NEW FOR YOU AS A SERVICE ! Machine leasing up to 60 months without down payment, without residual value, personal advice and individual leasing rate calcu ...
bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm spindle taper MT: 3 column diameter: 115 mm table surface area: 514 x 360 mm spindle turning speed - stepless: 160 - 2250 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 0,285 t dimensions of the machine ca.: m Condition: new / unused: The machine can be viewed under current.: 37981 400 V, 50 Hz, colour: light grey RAL 7035 continuous speed control, digital speed indication, push button for emergency switch off, turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso. operation manual, wiring diagram. Machine has been checked in our workshop, including electr. testing report. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Belt Conveyor/Conveyor Belt/Webbing Manufacturer: Schunk Fördertechnik GmbH Condition: used Model/Type: Strap Total length: approx. 5110 mm Total width including motor: approx. 600 mm Total width without motor: approx. 320 mm Conveyor width/belt width: approx. 300 mm Belt Type: Fabric Tape Material: Steel/Aluminum Frame height: 100 mm Engine included: 0.25 KW Including 3 feet height adjustable Internal Article Number: 2026032303 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent ...
Specifications: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/U - Drilling spindle speeds in gear stages 95 - 2000 rpm - Right - Left - Drilling spindle stroke 160 mm - Projection 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - distance table – drilling spindle 500 mm - distance machined base plate – drilling spindle 1050 mm - Column diameter 160 mm - Lighting - Coolant device - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg
Specially designed for small businesses and rim coaters. Plant complete consist of: Powder furnace width X height x depth 1200 x 1600 x 1200 mm 15 KW Powder cabin width X height x depth 2000 x 2240 x 920 Latest powder gun from romer ProfiGun PM-1 All together for 10,900.00 net plus freight costs and assembly Delivery time approx. 16 weeks.
Bartscher combi steamer for 2/3 GN shells, with core temperature probe, with 3 flat 2/3 GN shells and 3 deep 2/3GN shells (see photos), 4 shells of which are new. Current: 230V/50Hz, 2.5 KW with operating instructions
1 of used feeder system with vertical delivery, make Pfankuch, type ASB-175 KR (control unit right), with VS 2000 controller, new 1999, product width min/max 47/105 mm, product height min/max 55/300 mm, speed max. 115 m/min (depending on product). Mulitvoltage 90-240V, 50-60Hz, 0.4 KW. Servo driven. Last used to feed coupons 95 x 74 mm at a speed of 120 coupons/minute.
1 of used feeder system with vertical delivery, make Pfankuch, type ASB-175 KL (control unit left), with VS 2000 controller, new 1999, product width min/max 47/105 mm, product height min/max 55/300 mm, speed max. 115 m/min (depending on product). Mulitvoltage 90-240V, 50-60Hz, 0.4 KW. Servo driven. Last used to feed coupons 95 x 74 mm at a speed of 120 coupons/minute.
Linear cooler for donats/pastries/cakes etc. Linear cooler, consisting of the following components: - Conveyor belt with drive - Insulating housing - Evaporators and others - Refrigeration technology - Control cabinet Geometric specifications External dimensions Length: approx. 7,800 mm Width: approx. 1,800 mm plus control cabinet Height: approx. 2,400 mm plus valve station Inlet height: approx. 880 mm Spout height: approx. 1,030 mm Technical performance data using the following example: Nougat Donut (Master) Product weight: approx. 80 g Product size (Ø x H) approx. 100 x 35 mm Processing capacity: 320 kg/h = 4,000 pcs/h Throughput time: approx. 3.5 min, adjustable Power connection: 400 V, 3 Ph, 50 Hz Total power requirement: 30 kW Radiator dimensions (LxWxH): 7,800 x 1,800 x 2,400 mm Condition: well-maintained, fully functional Availability: immed ...
x-travel: 6000 mm y-travel: 2000 mm z-travel: 3000 mm Control: heidenhain TNC 415 total power requirement: 34 kW weight of the machine ca.: 31 t dimensions of the machine ca.: 7000 mm m Stocknumber 1110055 Type of machine CNC Floortype milling machine Make ZAYER Type KCU6000 Build in 1992 Type of control Heidenhain TNC 415 X-stroke (mm) 6.000 Y-stroke (mm) 2.000 Z-stroke (mm) 3.000 Speeds (Rpm) 20 - 1.800 Admission in spindlehead BT50 Feeds X (mm/R) 5 - 5000 mm/min Feeds Y (mm/R) 5- 5000 mm/min. Feeds Z (mm/R) 5- 5000 mm/min. Rapid feeds 10.000 mm/min. Total Power (KW) 34 Lenght (mm) 11.000 Width (mm) 2.500 Height (mm) 7.000 Weight 31.000 Kg Additional information Juaristi MG6 turntable: 1500 x 1200 mm Cooling system: 2.5 Bar Tool cooling: 15 Bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 14.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: Heidenhain Itnc 530 total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Filter bowl, pneumatic filter, filter regulator -Manufacturer: Festo, pneumatic filter type MS6-LF-1/2-CRV -Connection: G1/2 -Pressure: max. 12 bar -Price: per piece -Number: 3 Stück -Dimension box: 280/120/H150 mm -Weight: 0.7 kg/Stück
Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel -Two-hand control panel: from a press brake Atlantic HPT 13536 -Foot switch: Bernstein Classic -Dimensions: 920/1010/H1100 mm -Weight: 25 kg
Air compressor Planet Air L 550 with dryer KT 700; good condition; 550L/min.; 10 bar; incl. air dryer KT 700. Compressor Plant AIr AL 550; good condition; volume 550L/min.; 10 bar; with air dryer.
Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Mitsubishi, frequency converter FR-A044-2.2K-ER -Power: 2.2 kW -Input: 380-460 V 50/60 Hz -Output: 6.0 A -Dimensions: 215/200/H185 mm -Weight: 4.8 kg
Cylinder cover Recon The cylinder covers were equipped with the following new parts: - Inlet and exhaust valve guides. - Intake and exhaust valve seats. - Inlet and outlet valves. - Nozzle protection tube. - Rotary device. The cylinder covers were tested with 10 bar water pressure. The cylinder covers were planned. The valves ground in with the seats and mounted with new valve stem seals. Price per piece.
Power supply, power converter, power supply unit, switched-mode power supply, fire protection control unit -Manufacturer: Ströbich, protronic -Product: Control panel for power supply fire protection control RZ7 NT24-BMZ2 -Dimensions: 180/130/H2 mm -Weight: 0.1 kg
Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat, transmitter -Manufacturer: PMA, temperature control -Type: CI 45 -Output: 500 VA, 250 VAC, 2A -Dimensions: 125/22/H110 mm -Weight: 0.2 kg
Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves -Clamping sleeves: 6 pieces -Recording: SK50 -Various sizes: 6-32 mm -Sale: only to be sold as a complete set -Box dimensions: 280/220/H155 mm -Weight: 13 kg
continuous grilling line completely stainless steel adjustable product height Useful length 1,800 mm Track width 600 mm with bottom and top band: bottom and top contact frying independent temperature control at the top and bottom electrically heated ± 90 kW with belt washing system at the top and bottom Adjustable temperature range per heating plate (6 pieces) Capacity up to 250 kg / hour depending on the product infinitely variable speed Dimensions (L x W x H): ± 3,000 x 1,650 x 2,400 mm
Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Design: stable -without: roller conveyor drive motor -Roll width: 557 mm -Conveying length: 680 mm -Diameter roll: 70 mm -Dimensions: 875/700/H125 mm -Weight: 44kg
Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter -Manufacturer: Landis & Staefa -Type: RAM142.0/1982 -Dimensions: 185/95/H80 mm -Weight: 0.3 kg
Combination laser punching FINN POWER LB6 Year 2003 3000x1500
Plug, connector, cable socket -Manufacturer: Siemens, connector 11 pieces -Type: AGA67/GDML 2016 GB 1 -Price: complete -Dimensions: 50/30/35 mm -Weight: 0.1 kg/piece
Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober with Original wooden cooling tunnel manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 305 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: 1930 work width: 305 mm different: With origin wooden cooling tunnel, approx. 8m extendable mass container absolutely in original condition ! We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, (EXW)unpacked
Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober antique manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 620 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: maybe between 1930 - 1940 work width: 620 mm different: with wooden cooling tunnel, approx. 8m fixed mass container We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, unpacked
Specification: Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T
complete 230kW
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: KEB, Combivert frequency converter -Type: 07.FO.R01-1228 -Input: 200 ... 240 V 50/60 Hz -Price: per piece -Number: 4 piece -Dimensions: 340/190/H85 mm -Weight: 3.3 kg
Connecting rod without connecting rod head MAK M43C Recon Crack tested using Magnaflux process. Testing for parallelism of the connecting rod bearing holder and the connecting rod head revealed a deviation of less than 0.01 mm. Connecting rod bearing holder in the brushed state 0.01 mm. Connecting rod is sold as shown. MAK Part Number: 432810-100
Betschart Swiss Transformer Core Testing System KPA 15 Function The output voltage, which can be infinitely adjusted by hand by means of a rotary knob, is guided directly to the excitation coils of the test core. In this way, an electromagnetic field that is as homogeneous as possible is to be built up in the air gap of the test core, with which nuclear material inserted in the air gap can be characterized. The basic operation of the core test system is carried out via the switching and display elements on the front panel at the front of the test trolley. Specifications Input voltage : 2 x 400 V – 50/60 Hz Input current : 38.3 A maximum Output voltage : 0 ... 230 V Output current : 65 A maximum Measurements : Rotary iron voltmeter 0 ... 500V for input voltage Rotary iron voltmeter 0 ... 250V for output voltage Rotary iron Ampèremeter 0 ... 40/80A for input current Rot ...
High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 973 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece
New airend BOGE BA 30 as a replacement for Termomeccanoca SCA10D (TM SCA 10 D) The installation dimensions are the same. BOGE Id.Nr.: 201021766P ( incl. gasket DN 60x D110x 2 and O-Ring-90x3-N-FKM (Viton) 75)
maximum number of results exceeded
please refine your search
