hegla gmbh co used for sale

Screw compressor Atlas Copco GA30VSDFF Inverter and dryer integrated. 30 kW 12.80 bar 5.58 m3/min Year of Make: 2013 Hours: 68,578

Screw compressor Atlas Copco GA160VSD+FF. Dryer and inverter integrated. 160 kW 8.3 bar 33.10 m3/min. Year of Make: 2021 Hours: 25,495

Bio shredders/ mixers Seko Constellation 6000/200ME Electrically powered stationary organic shredder/mixer for processing garden waste, cellulosic waste, organic waste, market waste, green waste, etc. for composting Power: 180 KW Total weight: 11,100 KG Basic equipment: • Branch gearboxes with planetary gearboxes and electric motors • With control console to start the machine at full load • Automatic gearbox control and reversal of the chopping unit • Hopper made of wear-resistant steel • Spiral chopping shafts made of wear-resistant steel • Chopping blade made of high-strength steel • Replaceable, adjustable counter blades made of wear-resistant steel • Retractable discharge belt, discharge height up to 3m Condition of the machine The machine is in good technical and visual condition. Warranty: The machine will be sold in the condition existing ...

Year of construction : 2011 Control CC200 Locking force 400 tons incl. various accessories ( Piovan cooling unit, Tooltemp cooling unit, vacuum pump ) Machine comes directly from production

General SKU376X1178 LocationBarneveld MakeDriam Main Features MaterialStainless steel Motor1.5 KW Inlet diameter700 mm Specified Features - Coating pan Coating pancheck Pan diameter1300 mm Pan depth800 mm In-/OutletDia. 700 mm Pan can be tiltedcheck Without motor1,5kW, 230/400V, 1395 rpm. Pan speed17 rpm. With fancheck MaterialStainless steel 1.4306 (304L) General Typedriapan Year of constructionunknown Floorspace1,3x1,8 m Total height1,9 m Weight620 kgStarchSugarConfectionerySolid pharmaceuticsCoating pansDriamIndustries > Food & Feed > StarchIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical > Solid pharmaceuticsCoating pans > Coating pansBrand > Driam What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You a ...

TECHNICAL DATA: Carpet width: 320 mm Spindle: Ø 70 mm Saw blade: Ø max. 350 mm Processing height: max. 120 mm Electric height adjustment Feed with 2 speeds (0.6 kW) Installed power: 30 kW EQUIPMENT: 1 cabinet with tools

Titanium angular rotor BECKMAN COULTER 70.1 Ti Fixed angle rotor Max: 70,000 rpm, 450,000 x g Capacity: 12 x 13.5 mL Nominal capacity: 162 mL K Factor: 36 Angle: 24º Maximum tube length: 76 mm Maximum tube diameter: 16 mm For use with H, R, S centrifuges

BECKMAN COULTER Allegra X-12R Refrigerated Centrifuge with SX4750A Rotor Reference : X-12R Max. Centrifuge Speed: 10200 RPM Capacity: 4 x 750mL (4L) Refrigerated = -10°C to 40°C Max. FCR: 11400 x G Voltage: 230V / 50/60Hz Net Weight: 121kg Autonomy: 9h. 59 min. or continuous Dimensions: 77 × 63 × 36 cm BECKMAN SX4750A Oscillating Bucket Rotor 4 x 750ml carrycots with lids Max. Speed: 4750 rpm Max. FCR: 5250 x G 1 set of 4 349946 adapters for 62 mm diameter polypropylene bottle (Designed for a 250 ml flat bottom bottle) 1 set of 2 adapters 349950 for 14 tubes of 15ml 1 set of 4 multi-well plate holders Year of Manufacture: 2009

Aluminum angular rotor BECKMAN COULTER JA-25.50 Fixed angle rotor Max: 25,000 rpm, 75,600 x g Capacity: 8 x 50 mL Nominal capacity: 3,000 mL Biosecurity Lid For use with Avanti J Series and J2 Series Centrifuges (except J-21 Series)

Professional organic waste recycling and fertilizer production line available for immediate sale.This complete installation is designed to transform poultry, cattle, or pig manure and organic waste into high-quality granulated organic fertilizer pellets. EcoCert compliant output. Produced in 2022. Fully operational and well-maintained. Technical Specifications - Capacity: up to 5 tons per hour - Condition: Fully operational, well-maintained - Year of Production: 2022 - Output: High-density organic pellets, EcoCert compliant Complete Production Process Compost Processing - Grinding - Mixing with Probiotic and Additive injection capability - Granulation - Drying - Cooling - Automated Packaging Applications - Poultry manure processing - Cattle manure processing - Pig manure processing - General organic waste recycling Key Investment Benefits Fast ROI: Converts waste management cost ...

Manufacturer: MicroStep Model: MSF Compact 1501.30L Type: CNC Fiber Laser Cutting Machine Year of Manufacture: 2020 Laser Source: IPG YLS-3000-U Laser Power: 3.0 kW Working Area: 1500 x 3000 mm Maximum Material Thickness: 10 mm stainless steel Power Supply: 3L+N+PE AC 400/230 V / 50 Hz Rated Current: 20 A Weight: 500 kg Protection Class: IP 54/20 Standard: IEC 61439-1 Condition: Used Find more here - .ucymachines/ Contact us at - sales@ucymachines

Screw conveyor to collect from mixer and convey to big bag filling station, 1,5 kw motor, mounted on 2 fixed+2 pivoting wheels, adjustable discharging height 260-280 mm from ground, loading height 700 mm from ground, Used machine, reconditioned, installed power - used power in work: about 60-65% : 1,5 kw

Description Paint Mixer Biaxial Mixer COLLOMIX Rota 30 from 2005 for mixing of:  Paints  Paint granules  Façade paints  Industrial paints  Plating  Other low-viscosity materials Max. mixing weight: 35 kg Rec. Continuous mixing weight: 30 kg Max. container height: 60 - 400 mm

Description MBO CoBo Stack from 2024 is a cobot, i.e. a collaborative robot that does not require a protective cage. Stacks of products, such as folded signatures, are transported from the delivery to the table of the CoBo-Stack. From there, the cobot picks up the stacks and places them on pallets. This frees the operator from all physical work on the delivery Demo video: https://www.youtube.com/shorts/oRa087sZjAY

Description Sumbel Coronel 60 edge banding machine with two rollers used, like new 2mm – 60mm edge banding 2-roller system for exact glue application!

Description Pitney Bowes franking machine Connect 3000 MPR1 from 2023 Technical data Cycle rate up to 18,000 letters/hour Cycle speed with simultaneous dynamic weighing up to 12,000 letters/hour Technology Inkjet Included additional functions Scale with automatic weight. Data transfer yes, up to 5 kg FRANKIT® Functions TouchIT – Direct product code entry yes 2D matrix code yes 1D barcode for additional letter services yes Second EKP number yes Order number for special conditions yes Envelope formats C6 yes DIN long yes C5 yes C4 yes B6 yes B5 yes B4 yes Max. clearance height (mm) 19 Functions Portofon for

General SKU200W006 MakeHPV TypeRV Base SO No.2002-M-1 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Specified Features - Inline mixer MaterialStainless steel 1.4404 (316L) General With switchgear(as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO.with:IKA, type Dispax-reactor DR2000/5-ATEX, year 2013, motor 7,5kw, 400 ...

General SKU020A140 MakeAlfa Laval TypeContherm 6x4 No.HC-288 Year of constructionunknown Mounted on framecheck Main Features MaterialStainless steel Motor4 KW Surface0.4 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger(1x) Heating surface0,37 M2 (4 Square Feet) Cylinder sizesdia. 152mm (6 Inch) With jacketcheck Motor4,0 KW, 380 Volt With variable speed drivecheck MaterialStainless steel With jacketcheck General LocationBarneveld Floorspace1,2x0,9 M Total height1,8 M Technical specs Extra informationcylinder size: 152 mmOils & fatScraped surface heat exchangersOintmentsStarchDiscountCosmeticsFood additivesSugarConfectioneryBeveragesBiopharmaceuticalAPIAlfa LavalIndustries > Food & Feed > Oils & fatHeat exchangers > Scraped surface heat exchangersIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > StarchDiscountIn ...

General SKU034G143 MakeAlfa Laval TypeContherm 6x3 No.HC-4844 NCC + HC-1802 NCC Year of construction1992 / 1982 Mounted on framecheck Material Product contact materialStainless steel 1.4301 (304) Pressure Working pressure20 Bar Working pressure jacket17.2 Bar Main Features MaterialStainless steel Motor15 KW Surface0.6 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger(1x) Heating surface0,279 m2 each With jacketcheck Rotor can be cooled/heatedcheck Motor2x 7,5 kW (400 V, 1450 rpm) Speed177 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General LocationBarneveld With switchcheck Floorspace1,3 x 1,0 m Total height2,0 m Weight650 kg Technical specs Extra informationworking pressure 20 bar (300 PSI) / 31 bar (450 PSI): jacket working pressure 15,5 to 17,2 barOils & fatScraped surface heat exchangersOintmentsStarch ...

swing diameter: 2000 mm turning height: 1800 mm Control: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/min cross rail adjustment - vertical: 1200 mm cross rail adjustment - horizontal: +/- 1150 mm : 1500 mm bit feeder section: 240 x 240 mm Minimum immersion diameter: 340 mm cutting capacity: 50 kN max. torque on the faceplate: 50000 Nm speed range step 1: 2,8 - 80 U/min speed range step 2: 12 - 315 U/min Max. clamping weight: 12000 Kg power capacity faceplate: 105 kW weight of the machine ca.: 33 t dimensions of the machine ca.: 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chi ...

JEOL JFC 1100 FINE COAT Ionic Sprayer Untested equipment

2008 Spindle module replaced Circumferential diameter over bed 630 mm Circumferential diameter over support 370 mm Spindle through bore 105 mm the machine is delivered with a 250 mm manual chuck. Spindle speed range 1: 4 - 430 rpm. Spindle speed range 2: 430 - 2500 rpm. Main motor power: 18.5kw S6-40%

The CombiCut oxyfuel drilling system from Microstep offers a cost-effective alternative to high-performance laser cutting systems, especially for thicker sheets. Manufacturer: Microstep Model: CombiCut Year of Manufacture: 2022 Technical specifications: - Cutting area: 6000 x 2000mm - Drilling unit: 26.8 kW – up to M24, drilling up to 40 mm - Includes calibration unit for drilling tools - Includes tool changer (6-position – at the end of the table) - Filter system , suitable for indoor installation - Cutting thickness up to 150mm - Includes BG-compliant safety technology (light barrier) - Includes guided tours (S49) - The portal is driven on both sides for high precision. - Operating hours: 95 hours drilling, 587 hours oxy-fuel - Total hours: System switched on 5600 hours - No technology expansion possible - No CAM software required – the system is compatible with almost any C ...

Dough dividing machine Kemper Consul ET dough weigher - Manufacturer: Emil Kemper GmbH - Type: Consul - ET - Year of construction 2003 - With manual control

General SKU374U1018 LocationBarneveld MakeHosokawa Micron Europe B.V. Type100 RV-4 Main Features MaterialStainless steel Volume10000 Ltr. Motor11 KW Specified Features - Conical mixer Conical mixercheck Capacity10.000 Ltr Largest cone diameter3300mm Cone height4935mm Manhole2x With stainless steel armcheck Top drivecheck Motor11 kW, 380 volt + 1,1 kW, 220/380 volt Bottom bearing pintle bearingRadial screw bearing Bottom discharge4x Dia. 125mm MaterialStainless steel 1.4301 (304) General No.101365/2310049 Year of construction1992 Floor space3,6x3,6 m Total height6,5 mPowdered foodsGeneric medicinesTea, herbs & coffeeStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountOther pharmaceuticsSugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsConical mixersMinerals & inorganicHosokawa MicronIndustries > Food & Feed  ...

Deck Oven Miwe Condo CO 3.1208 Year: 2012 - Manufacturer: Miwe - Model: Condo CO 3.1208 - 3 shelves each 120x80cm - each shelf for 2 trays 60x80cm long next to each other or 4 trays 60x40cm - Each floor with separate control panel display - Top and bottom heat can be adjusted separately - Each floor with separate steam box - With night start function - each floor individually 9.4 kW together 28.2 kW - Entire furnace with proofer 30.1 kW - With ECO function - with proofer Proofer has 1.9 kW - With exhaust hood - Can be moved on castors - Year of construction 2012 - Outer dimensions approx.: 150x 135x190cm WxDxH

Screw compressor Atlas Copco GA30VSD+FF Dryer integrated Inverter integrated 30 kW 13 bar 5.85 m/min Year of Make: 2014 Hours: 43965

Manufacturer NICOLAS CORREA Model RAPID50 Year of Manufacture 2.005 CNC HEIDENHAIN 530 HSCI Table Table surface 5,000 x 2,000 mm Number of slots T 11 Slot size T 22 mm Maximum weight on the table 30,000 kg. Routes and advances Longitudinal Course (X-Axis) 5,000 mm Transverse Course (Y-Axis) 3,100 mm Vertical Course (Z Axis) 1,200 mm Distance between columns 2,800 mm. Fast Forward Axles (X) 20,000 mm/min Fast Forward Axles (Y, Z) 30,000 mm/min Head UAD II automatic head included UAD II head positioning 0.1º / 0. 1st Speed 6,000 rpm No. of ranges 2 Power 32 kW ISO 50 head cone Hydraulic head clamping Head 2 – vertical chuck INCLUDED Accessories Automatic tool loader INCLUDED Loader positions 30 Automatic head changer INCLUDED 2 longitudinal chip evacuators INCLUDED 1 x Cross Chip Evacuator INCLUDED Internal cooling 20 bar INCLUDED Portable electronic  ...

MCS Jigger High Temperature 144ºC. Type COMBY-JIGGER JP70. Year 1982. It underwent a complete renovation in 2002 Pressure: 3kg/cm2 Capacity: 9170 l Roller width 2,000 mm. Diameter of fabric 1100 mm. Diameter of rollers 324 mm. Additives tank.

Various old small machines are available. 1) Lathe Colchester Chipmaster 5x20. 2) Multi-spindle drilling machine Steinel BGS 140. 3) Orbital riveting machine Steinel VS. 4) Hydraulic power unit Sauter HA1202. 5) Laminating machine Sallmetall. 6) Drum pump Flux F 407. 7) Hydraulic power unit Sauter HOV4. An on-site inspection is possible. A package sale is desired.

Atlas Copco GA45VSD screw compressor Inverter integrated 45kW 13 bar 8.60 m3/min Year of Make: 2010 Hours: 48,322

General SKU424X1320 MakeDriam TypeDriacoater DRC 1200 LocationBarneveld Main Features MaterialStainless steel Specified Features - Coating pan Coating pancheck Coating installationcheck Capacity158 l. Batch sizemax. 120 kg Pan diameter1200 mm Pan depth800 mm Motor4 kW, 400 V With frequency controllercheck Pan speed1,5—22 rpm With fancheck With spraying arm(99—592 ml/min) With dosing pumpcheck Motor0,37 kW, 400 volt MaterialStainless steel 1.4301 (304) General No.KD89670 Year of construction2003 With switchgear(as is) Floorspace1,60 x 1,80 m Total height1,90 m Weight2150 kg Extra Specificationswith 2x HERMANN WALDNER tanks: 130 l.: pressure: -1/0,5 bar, temp.: 0 / 100 °CStarchSugarConfectionerySolid pharmaceuticsCoating pansDriamIndustries > Food & Feed > StarchIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceu ...

Turned grinding machine OMA COSBO 120 Working length 1200mm Two grinding units Oscillating Polishing Brushes Work after the copier

Panel saw manufactured in 2020. This FIMAL concept 350 features a squaring length of 3200 mm and a blade diameter range of 300 to 350 mm. It operates at a blade rotation speed of 4000 rpm and has a main motor power of 7.5 hp. If you are looking to get high-quality cutting capabilities, consider the FIMAL concept 350 machine we have for sale. Contact us for further details.

: 0554 mm : 370 mm : 3000 mm : 280 mm : 104 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor belt systems 21 or 23 according to the desired layout. For the selected asset or your existing lines. Curves, switches and drives can be adapted according to your wishes. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

Paper drill Dürselen Corta PB 04 N; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; Speed table stroke adjustable; max. Stack height 50mm; Insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless drill belt; Optionally with Filofax 7-fold drill head. Paper driller Dürselen Corta PB 04 N; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind the driller 42mm; slide table; distance between the holes 31,7-293mm; endless drill band.

An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible.

turning diameter: 340 mm turning length: 1000 mm control: Mazatrol SmoothC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill Comec FMC 900+ AGG Automatic loading from the magazine Number of spindles 3 Number of milling spindles 1 3kw main motor 0.5kw milling machine motor Element length max 900mm Element width max 100mm Maximum drilling distance 800mm Use in large series of chairs, beds, cots as well as in components of other furniture Net price

General SKU243Y170 MakeBühler Serial3068043442 TypeBTSK 30/40D Sizes Screw diameter30 mm Main Features Motor21.2 KW Inlet diameter50 mm L/D53 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter30 mm L/D53 Co-rotatingcheck Number of heating zones:11 Water coolingcheck AC-motor21 kW 360 V Screw speed25—800 rpm Feeding with hoppercheck With jacketcheck General Year of construction1998 LocationBarneveld With switchgearcheck Sizes switchgear2,40 x 0,50 x 2,00 m Floorspace2,38 x 0,60 m Total height1,45 m Weight700 kgPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersBühlerIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > CosmeticsIndustries > Food & Feed > Animal feedIndustries > Food & Fee ...

used Dräco coil carriage, smooth-running spindle, optimal tension, very easy to drive Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Belt width :1000 mm Coil weight load capacity: 1000 kg Colour: blue Weight: 110 kg Dimensions: 1300 x 750 x 1000 mm Coil inner diameter (min.): 250 mm Coil inner diameter (max.): 515 mm Coil outer diameter (max.): 1100 mm Coil width (min.): 1000 mm Clamping range :280 - 510 mm

CNC frame processing machine Brand: COMEC DRIVER New machine - With this machine you can process assembled door frames in quantity-1, door by door. - 5-axis machining spindle with ingenious crosshead technology for fastest tool use and productivity. Automatische Positionierung der Auflagensupporte. - High-precision and program-controlled clamping system with O-reference on the surface. - Laser measurement of the surface contours for precisely fitting milled fittings. - Automatic discharge of the finished frame parts. - Possibility of connection to known door software systems. - The machine can be individually designed to meet your required machining needs. Give us your requirements and let us offer you your MD JAMB suitable. - This offer is valid for Germany. Wehrmann is the exclusive sales and service partner for COMEC in Germany.

Pastry line, Fabr. Rondo, Compactline conveyor belt width 640, total length 7,000 mmStainless steel version, mobile

General SKU249Y198 MakeComi-Condor Serial2371 TypeTaurus Main Features MaterialStainless steel Motor0.75 KW Inlet diameter15 mm Specified Features - Basket centrifuge Basket centrifugecheck Perforated basketcheck Basket sizesø 150 x 250 mm Max. loading weight5 kg Liquid outletDN25 Motor0,75 kW 400 V 1350 rpm (Ex) With variable speed drivecheck Max. basket speed3000 rpm MaterialStainless steel 1.4306 (304L) General No.2371 LocationBarneveld Mounted on foundation platecheck Mounted on wheelscheck With switchgear(as is) Floorspace0,7 x 0,6 m Total height0,9 m Weight300 kgPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesE-waste & metalFood additivesSugarConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalBasket centrifugesAPIMinerals & inorganicComi-CondorIndu ...

Manufacturer: Atlas Copco Model: QAS200 Year of Manufacture: 2011 Type of Machine : Emergency Power Generator Operating hours : 242 h Find more here - .ucymachines/ Contact us at - sales@ucymachines

A complete industrial sawmill production line( Year of Manufacture : 2000) is available for sale , it includes the following elements: 1 - Log Yard Manufacturer: Hobest AG / EWD / Microtec / Herzog Forsttechnik Includes: • 3x Feed conveyor type NQF Hobest • 3x Step conveyor type HSF Hobest • 2x Block conveyor type BZ 500 Hobest • Chain swing saw with log holder type DSH/EWD-Stihl • Block conveyor with rotating device type BZ 500/S Hobest • Metal detector with conveyor type MSG/120 EWD • Tapered roller track type RGK Hobest • Root end reducer type Hobest Primus • Debarker type ER 90 EWD • Tipping trough type RKW/500 Hobest • Cross conveyor type NQF Hobest • Block conveyor type BZ 500-1E Hobest • Log measurement system type Kemes Keba • Sorting block train type BE 500/SA Hobest • Central hydraulic unit Hobest • Electrical control system  ...

Nowicki Vakuum tumbler -Typ: MA-G-5400 -Kapazität: 5400 l -Max. Beladung: 2700 kg -Mit Kühlung -Antriebsleistung: 8,2 kW -Gewicht: 2900 kg -Abmessungen: 4150 x 1900 x 2350 mm -Stromversorgung: 3 x 400 V -Aus Edelstahl -Einsatz mit Band- oder mechanischer Beladung -Verfügbar: 2 Stück -Zustand: Gebraucht, sehr gut, generalüberholt, sofort einsatzbereit