hegla gmbh co used for sale

Nachi - Fujikoshi Corp Robotic Manipulator, FD -MC10L Six-axis robotic manipulator Nachi Nachi - Fujikoshi Corp (2015) Confessions: Item Description, Parameters Quantity Robotic Manipulator, FD-MC10L 1 pc ∼ Six-axis robotic manipulator nachi ∼ Max. Reach Radius 2019 mm at p-Point ∼ Repeatable Position Accuracy ± 0.06 mm ∼ Wrist Load Capacity 10KG ∼ Arm Load Capacity in the 3rd Axis Location 15kg Absolute Position Readout ∼ High Dynamics of Movements and Arm Rigidity ∼ Protection of the Wrist of the Robot Robot IP65 Control System, nachi FD11 Control Unit of Six-Axis Manipulators nachi ∼ Modular Construction ∼ ∼ ∼ Windows System Kits ∼ Application SW FOR PROGRAMMING MOTIONS FD CONTROL ∼ Built-in PLC module for peripherals ∼ Programming module teach pendant ∼ 15m ∼ JogDial Controller ∼ Ethernet Spread for network connections ∼ FTP client for data bac ...

Toothed Disc Mill CONDUX V3 5.5 kW adjustable 210 - 1577rpm V-belt drive (2x SPA 150-3), Overhauled, re-stored and sealed

Deck Oven Electric Oven Miwe Condo Model: Type: CO.5.1208 AS control Bottom heat and top heat can be controlled individually 5 baking shelves 1200 x 800 bottom 3 stoves with steam Chassis mobile with brake Connection 400V, 5 x 9 kW, 5 x 16A-CEE plug Water connection 3/4 inch, water drain DN 40 Dimensions: 1500 x 1300 x 1950 mm, WxDxH Used oven

Manufacturer: SEW Mowiedrive Compact MDX60A0110-503-4-00, Type: MDX60A0110-503-4-00, Sale without warranty: 16,8 KVA, No right of return: 0-180 Hz, Installation height: 24 Ampere,

Manufacturer: Costa, Type: KA CCC 1350, Year: 2003, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 160, Number of sanding belts: 3, Sanding belt dimensions: 1350 X 2620, Rollers: 3, Längsschleifaggregate: 3, Bürstenaggregate: 1, Steel roller: 2+1 Gummi, Bürstenaggregate: 1, Band 1 Leistung kW : ca.20, Band 2 Leistung kW : ca.20, Band 3 Leistung kW : ca.20, Continous adjustable feeding speed m/min: 5-15, Transportbandantrieb kW: 2,2, Constant table hight: yes, Brushing unit: yes, Year :2003

Manufacturer: Commander Frequenzumrichter, Type: SE 23400150 SE T 2,5, Serial number: 3781643037, FREE TEXT: kw 1,5, Free text 1: 0-1000 Hz, Free text 2: 6,4-4,2 Ampere,

Manufacturer: KEB, Type: Combivert, Model: 10.56., Hz: 50/60Hz, Output DC Volt: 380/415 V, Output PpK= kW: 2,2 kW,

Manufacturer: Commander SE, Type: SE 23400220, Model: SE 3,5 T, Serial number: 2083802671, Frequency converter: yes, mH/Hz: 0-1000, FREE TEXT: 380-480 Volt, Free text 1: 2,2 kw, Free text 2: 9,0-5,0 Ampere,

Manufacturer: Commander SE, Type: SE 23400400 SE 5,5 T, Serial number: 2083802671, FREE TEXT: 4 kw, Free text 1: 50-60 Hz, Free text 2: 0-1000 Hz, Free text 3: 14-9,5,

Manufacturer: Commander SE, Model: SE 2,5 T, Serial number: 3781643041, Frequency converter: yes, FREE TEXT: Ampere 6,4-4,2, Free text 1: kw 1,5,

Manufacturer: Costa Inert Trocknung, Type: C X C 1350, Year: 2011, Work piece width min-max mm: 50-1350, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Gesamtlänge UV Modul mm: 1300, Lamps straight installation: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Position of lamps: gerade, Power per lamp watt UV: 60-120, Feeding speed m/min: 5-20, Conveyor: Band, Exhaust air diameter mm: yes, Feedin speed m/min: 6-25, Belt conveyor: yes, Year :2011

Manufacturer: KEB Homag Umrichter, Type: Combivert, Model: 09.F0.R11-3429, Serial number: 93410337/021161, FREE TEXT: AC-MOT 1,5 kw, Free text 1: 2/4 P, Free text 2: 50-60 Hz, Free text 3: 2,8 Kva,

Manufacturer: Homag, Type: CPU PC Controlleinheit, Model: 5003, Serial number: 2-083-01-6902,

Manufacturer: Commander SE Frequenzumrichter, Type: SE 23400150 SE 2.5 T, Serial number: 3781484007, FREE TEXT: kw 1,5, Free text 1: 50-60 Hz, Free text 2: Ampere 6,4-4,2,

Manufacturer: Robatech, Type: Coceptb 5/4, Year: 2006, FREETEXT1: Wachsauftragsgerät , FREETEXT2: mit Düsensystem , FREETEXT3: für Wachsversiegelung, FREETEXT4: inkl. Düsen und Halter, Year :2006

Manufacturer: Commander SE Frquenzumrichter, Type: SE 23400150, Model: SE 2,5 T, Serial number: 3781643022, Hz: 0-1000, FREE TEXT: kw 1,5, Free text 1: Ampere 6,4-4,2,

Manufacturer: KEB, Type: Combivert, Model: 12.56.201, Current (A): 9 Ampere/4 Kw,

Manufacturer: Costa, Type: Strettoio, Year: 1999, Work piece width min-max mm: 180, Min.-max. workpiece length in mm: 2200, Stages: 5, Year :1999

Manufacturer: Costa, Type: SbF , Year: 1999, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Rubber roller: yes, Band 1 Leistung kW : 15, Transportbandantrieb kW: 1,1, Brushing unit: yes, Year :1999

Manufacturer: Atlas Copco, Type: GA 45, Year: 1991, Volume flow m³/min: 5,94, Drive power kW: 45, Drying unit: yes, Compressed air min/max bar: 10, Year :1991

Manufacturer: Costa, Year: 1999, Foil stations: yes, Shrinking tunnel mm: 1700, Year :1999

Manufacturer: Costa, Type: Lince, Year: 1999, Cutting widht mm: 300, Power engine kW: 58, Year :1999

Manufacturer: Atlas Copco, Type: GA 55, Year: 1991, Control: Atlas Copco, Schraubenkompressor: yes, Running idle houres: 69200, Volume flow m³/min: 7,5, Verdichtungsenddruck bar 1: 12, Hauptläuferdrehzahl U/min 1: 2850, Antriebsleistung kW 1: 55, Year :1991

Manufacturer: Costa Breitbandschleifmaschine, Type: CCT/1350, Year: 1995, Monting of the machine: Stahlwalze/Gummiwalze/Schuh, Sanding width mm: 1350, Sanding hight mm: 150, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Steel roller: yes, Band 1 Leistung kW : ca.30, Band 2 Leistung kW : ca.30, Band 3 Leistung kW : 17, Continous adjustable feeding speed m/min: 10-25, Transportbandantrieb kW: ca.3, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Weight in kg: ca.8000, Year :1995

Manufacturer: IMA, Type: Compact F 12, Year: 1996, Control: Beckhoff, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Min-max feed m/min: 18, Infeed table: yes, Premilling: yes, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Corner tracing type: yes, 4 motors: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Year :1996

Manufacturer: Costa, Type: T 1350, Year: 1998, Monting of the machine: schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Längsschleifaggregate: ca.17, Bürstenaggregate: yes, Band 2 Kombiaggregat Walze/Schuh: 10-20, Belt 4 pressure segment belt: yes, Belt 4 synchronous and reverse run: 32, Elektronische Tastung mm: yes, Table hight adjustment by engine: ca.1,5, Transportbandantrieb kW: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Year :1998

Manufacturer: Costa Giardina Tomanin, Type: Hochglanzlackierstrasse, Finished product: Hochglanz und Glaslackierung, Work piece width min-max mm: 150-1300, Min.-max. workpiece height in mm: 3-80, Min.-max. workpiece length in mm: 150-2800, Feeding speed min-max m/min: ca.10, Inlet conveyor: yes, 2 paint roller: 2 Stück Tomanin Lackwalze, 2 UV dryer lamps/Watt: 1 Lampen Giardina 80 Watt, 3 UV dryer lamps/Watt: 2 Lampen UV<CRLF>Giardina 80-120 Watt, Sanding machine: Costa Lackschleifmaschine Quer/längs, Available: sofort,

Manufacturer: Costa Lackschleifmaschine, Type: C 1350, Year: 1999, Control: Costa, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Rubber roller: yes, Shore roller 1: 40, Band 1 Leistung kW : 36, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Noise enclosure: yes, Workpiece emitting device nozzles: yes, Year :1999

Manufacturer: Superfici, Type: Compact 3 P, Year: 2015, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 90, work piece cleaning: yes, work piece detection: yes, Schnellwechselsystem : yes, Gun carrier: 2, Laquer system - airless: yes, Laquer system - airmix: yes, Transportsystem Papier: yes, Inlet conveyor: yes, wast cleaning: yes, Feeding speed m/min: 2 - 6, Jet drier mm: 12000, Removing belt: yes, Year :2015

Manufacturer: Homag CPU SPS-II, Type: 1 MB RAM und PC Cobtroller, Serial number: 2-083-01-5043, Year: 93, Year :93

Manufacturer: Koch, Type: Compact, Year: 1994, Control: NC, Work piece width min-max mm: 200, Min.-max. workpiece length in mm: 150-2100, Min.-max. workpiece height in mm: 10-80, Saw diameter mm: 400, Drilling support horizontal: 2, Drilling gearbox number horizontal: 2, Drilling supprt from bottom: keine, Drill spindles per support: 5, Drill-beam 90° swivel mounted: yes, Grid 32 mm: 17/22/35/30/124, Year :1994

Manufacturer: Toshiba, Type: Programmable Controller, Modell: EX20-1MCRB5, Seriennummer: 5602167,

Manufacturer: Corex, Type: Fassrührwerk, Year: ca. 2000, Pneumatisches Ausheben Rührwerk: 1,5 kW, Year :ca. 2000

Manufacturer: Comatic, Bauyeshr : ca.1995, Feeding by belt: yes, Main engine kW: 1,5, Speeds: 4-8-12-24, Stand: yes, Year :ca.1995

Manufacturer: Weinig, Type: Conturex 1, Year: 2004, Control: 840 D, Program: Alphacam, Working range X: 1.500, Working range Y-axis: 250, Working range Z: 125, C axis: yes, Number of milling spindles: 2, Milling engine 1 hours power: 10,5, pm: 18.000, Milling engine 2 hours power: 10,5, pm: 18.000, Number of tools per tool-magazine: 36, Year :2004

Manufacturer: Comil, Bauyeshr : 1995, Hydraulical/pneumatical: hydraulisch, High / low pressure: yes, Press length mm: 2200, Press hight mm: 60, Press depth mm: 650, Cylinder vertically: 4, Zylinder horizontal: 4, Pre-assembling conveyor: yes, Clamping: yes, Machine rigging: automatisch, Compressed air bar: 6, Year :1996

Manufacturer: Koch, Type: Compact, Year: 1991, Control: Programm, Working widht max mm: 150-2500, Arbeitstiefe max mm: 200, Working thickness max mm: 80, Schwenkbereich Grad in X: +30-90, Dovel units: 3, Dovel diameter mm: 10-12, Drill gearings: 2, Drill gearings: 2, Drill gearings: 2, Drill spindles per support: 5, Gluing: yes, Dovel insertion: yes, Raster 32 mm: yes, Compressed air bar: 6, Wight approx. kg: 3000, Year :1991

DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.

- With 20 plates - With 20 canvases - Machine in perfect condition Dimensions : - Length: 2000 mm - Width: 700 mm - Height: 1500 mm

- Number of plates: 20 - Number of cloths: 20 filter cloths, Monofil special Dimensions: - Length: 1600 mm - Width: 600 mm - Height: 1300 mm - In working order

completely rebuilt Fidia Combi Unica Machine suitable for the production of folders, sleeves, envelopes, etc. Maler hot glue system, 2 glue heads. optional 3-point gluing for boxes possible. price quoted is for standard machine with 2 glue heads

Nominal Power: 400 ton Stroke par minute: 16-48 Adjustable stroke: 10-250 mm Table dimension: 1200 x 1200 mm Ram dimension: 1200 x 1200 mm Distance table – slide: 1000 mm Adjustment slide : 200 mm Motovariator: 22-66 HP

FORMIT COMBI-1000 INDUSTRIAL POTATO PEELER Manufacturer: FORMIT Model: COMBI-1000 Voltage: 400 V / 3-phase Total power: 6.25 kW Industrial peeling machine for potatoes and other round or oval vegetables (for example carrots, parsnips, beetroots, turnips, sweet potatoes, etc.). Double peeling system through an abrasive peeling element and a knife peeling element: the peeling rollers are in part abrasive, in part fitted with knives. The product must be cleaned beforehand (washed or brushed). No water is required during the peeling process. Water is only needed for cleaning the machine. Made of AISI 316 stainless steel. Overall dimensions: 2,990 x 1,100 x 2,206 mm (L x W x H) Frame length: 2,280 mm Infeed hopper width: 500 mm Infeed/Outfeed height: 1,642 mm / 1,254 mm Overall weight: 1,250 kg Max. product length: 200 mm approx. 9 peeling rollers Roller len ...

The foaming cabin from the manufacturer Cannon is designed for industrial use in foaming processes for steering wheels in the automotive industry. The foaming cabin is composed of a total of 5 steering wheel foaming cabins, the difference between them being that each cabin can be a different color for steering wheel foaming. Other auxiliary equipment that are part of the foaming cabin system: -tempering oven type UF 450 PLUS -installation material preparation -individual material preparation installation for each cabin depending on the color of the steering wheel Manufacturer: CANNON Model: A-Compact 40FC Year of Manufacture: 2017 Type of Machine: Foaming Cabin Air Pressure IN: 6/8 bar Control Unit: Control panel PLC Usable Materials: Isocyanate, Polyol Maximum Absorbed Power: 10.1 kW Acoustic Pressure: 81 dBA Find more here - / Contact us at -

Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Weight: 3 T

REF-2391-B COMAS DRV 400 DOSING-DEPOSITING MACHINE WITH 5 NOZZLES Manufacturer: COMAS Model: DRV Type: 400 Serial no.: 3793 Year of manufacture: 2005 Dosing machine/depositor for the production of pastries Fitted with 5 standard conical nozzles (12 mm diameter) Voltage: 380V / 3-phase Working width: 400 mm Overall belt dimensions (mm): 2,200 x 530 (LxW) Overall machine dimensions (mm): 2,250 x 1,400 x 1,750 (LxWxH)

SPECIFICATIONS: Briquettes: Ø 60 mm Production: 70 kg/h Installed power: 7.5 kW EQUIPMENT: 1 mini silo

2000x1100x1100 mm

Deck oven Miwe Condo CO 3.1208 Year: 2015 - Manufacturer: Miwe - Model: Condo CO 3.1208 - 3 shelves each 120x80cm - each shelf for 2 trays 60x80cm long next to each other or 4 trays 60x40cm - Each floor with separate control panel display - Top and bottom heat can be adjusted separately - Each floor with separate steam box - With restart function - With ECO function - with proofer - With exhaust hood - Can be moved on castors - Year of construction 2015 - 2 swath apparatus swath boxes NEW

ECKERT Opal WaterJet COMBO waterjet cutting machine was built in 2011 in Poland by ECKERT AS Sp. z o.o. The machine, designed for precision machining of workpieces with a maximum thickness of 250 mm, combines all the benefits of plasma and waterjet cutting. The machining process is performed on a robust, large work table by means of a powerful cutting head. All table travel components are protected by bellows guards to ensure uninterrupted operation for many years of use. The design made of high-quality closed steel profiles, in turn, guarantees the highest stability during even the most demanding challenges. The ECKERT Opal COMBO WaterJet is offered with, among others, CAD/CAM software and a 37 kW high-pressure pump. Technical specifications of the ECKERT Opal WaterJet COMBO water cutting machine - maximum workpiece thickness (water machining): 250 mm - feed rate: 25000 mm/min - w ...