134,942 used machines on RESALE, but how to find them? Machine Search
Deck oven electric Miwe Condo CO 5.1208 used all-purpose oven stone slabs oven electric from Miwe Model Condo CO 5.1208 from year of construction 2013 tested and cleaned in stock immediately available for sale. The oven is with 5 shelves each 120x80cm with exhaust hood including steam condenser and proofing cabinet. - 5 tiers each 120x80cm - Each floor with Miwe FP control - each floor can be controlled separately - Top and bottom heat separately adjustable - each floor with separate steam function - with proofing cabinet - with steam condenser - with exhaust hood - Floor entrance height 17cm, interior height 16cm - Power: 49.1 kW - Built in 2013 External dimensions Width: 150cm Depth without hood: 132cm with hood +40cm Height without hood: 238cm with hood +20cm
Refer to code 1056 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
Electric motor, three-phase motor with 2 speeds -Power: 0.55/0.75 kW -Speed: 945/1410 rpm -Shaft: Ø 19 mm -Brake -Construction: B5 -Protection class: IP 54 -pole changing -Dimensions: 400/200/H230 mm -Weight: 25 kg
Refer to code 1077 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
Refer to code 1079 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
Gear motor, electric motor, electric gear motor -Speed: 60 rpm -Power: 0.45/0.55 kW -Construction: B3 angle -Diameter shaft: 24 mm hollow shaft -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 530/200/H240 mm -Weight: 31 kg
Upper support, cross support, cross table, cross slide table -Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL -Table surface: mm -Travel: x 350 mm/y 220 mm -Dimensions: 1380/1000/H800 mm -Weight: 800 kg
Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories
Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories
Multi-knife mill with 16-blade rotor 6 stator knives Drive 90 kW With accessories
Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1425 rpm -Shaft: Ø 28 mm -Design: B3 -Protection rating: - Quantity: 1 piece available -Dimensions: 420/320/H290 mm -Weight: 54 kg
BVM Compacta 5015 incl. tunnel Built in 2000 In stock and ready for immediate use
Collamat 3600 pages labeler Currently in stock Immediately ready for use
MAPPACK Conpax Servo Wrap Packaging Machine Foil Packaging
Three-phase motor, electric motor -Power: 5.2 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 450/340/H270 mm -Weight: 65 kg
Laboratory power supply, power supply unit, voltage generator, laboratory power supply device -Input: 230 volts -Output: 100-415 volts -Dimensions: 320/170/H130 mm -Weight: 3.2 kg
BVM Compacta Konti 5015 MY 2005 BVM SC 4030 SD Bj 2005 BVM TB 400 Bj 2007 BVM inlet conveyors
MPS EB 370-8 COLOR FLEXO Labelpress machine Year 2016 Printing width max. 360mm Equipment: Unwinder 1000mm diameter, 76mm expandable shaft 8 color Flexo – servo driven units Teknek two-sided web cleaner Double the station iStip Laminator on rail De-lam re-lam Web Turn bar BST Powerscope 4000 8 x UV from GEW, E-Bricks stepless, housing E2C Rewinder Accessories:
BV 17 cm, LIH, CRT double monitor, patient archive system
FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm
Heating power: 185 kW Heating water inlet temperature: 55 C Heating water outlet temperature: 60 C Heating water volume: 32 m3/h Refrigerant: R 134a Starting current: 147 A Capacity: 2x 25 kg Operating voltage: 400 V Control voltage: 230 volts Operating pressure: 28 bar Displacement: 101 m3/h Power consumption: 43 kW Subject to prior sale - errors possible Ref. No.: E-1165
Technical data of Used Universal cylindrical grinding machines Cometa HSP 2000: Wheel diameter: 762 mm Max diameter working: 800 mm Center height: 410 mm Working lenght: 2000 mm Wheel power: 15 hP Weight: 11 ton
For sale are used KALT cheese vats: Manufacturer: KALT Year of construction: 2001 and 2004 Design: closed, double-O Material: Exterior: Stainless steel (V2A) Inside: Copper Includes control cabinet and Siemens HMI (touch panel)
Dough filling and dosing machine Rheon KN 200 Cornucopia used Rheon KN 200 dough filling and dosing machine.The machine has been tested for function, can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - Dough pieces: 10-300 gr. - Output : 10-60 pieces/min -digital control - Stainless steel cladding - rollable on wheels - used Rheon KN 200 for bakery confectionery
Kitzinger crate dishwasher / instantaneous dishwasher - Type: Contino 400NDB1 - Year of construction: 2007 - Bandwidth approx. 70cm - Height entrance: 53cm - Total length: 685cm
Boxes Flow-through dishwasher Kitzinger Contino CWS802 -Boxes dishwasher -Scrolling machine -48 kW -Year of construction: 2012
Foil cutting mill Propulsion : 30 KW Voltage : 400 V / 3 ~ / 50 Hz
Collamat NG50 YL Side labeller 2011, stainless height adjustable frame, side labeller, max label height 110mm, digital screen, mobile, 1Ph (four in stock identical)
Deutz TCD 6.1 L6 engine Miretti Ex conversion diesel trolley mining
Key data: 525 , 700 , 400
525 kW Tuthill Coppus condensing steam turbine RLHA24 from 1999 in good condition used for sale. Manufacturer: TUTHILL Coppus Model: RLHA 24 Type: Steam Condensation Serial Number: 99H5046 Performance mech. [kW]: 525 Pressure inlet [bar]: 16 Temperature inlet [°C] 350 Pressure outlet [bar]: 0,70 Year of construction: 1999 Weight [kg]: 5700 Dimensions LxWxH [cm]: - More information here: stromerzeuger-discount.de/angebote/dampfturbinen/tuthill-coppus-rlha24 /
KRONES CONTIPACK A1 Extractor Capacity: 4,200 crates/h Heads: 5 R - L machine Ma-No. 23-0636009 LxWxH: 5000 mm x 2410 mm x 2850 mm Weight: 1.000Kg KRONES CONTIPACK A1 Unpacker Capacity: 4.200 crates/h Heads: 5 R - L machine Ma-No. 23-0636009 LxWxH: 5000 mm x 2410 mm x 2850 mm Weight: 1.000Kg
Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Manufacturer: Lincoln -Type: Control 84513 -Number: 1x relay available -Price: per piece -Dimensions: -Weight: 0.9 kg
COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...
Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.
Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.
used
Continuous Butter Churn Complete plant with PHE , controls, butter milk pump, tanks . Condition Good condition . Contact us for more information.
Continuous Butter Churn Complete plant with PHE , controls, butter milk pump, tanks . Condition Good condition . Contact us for more information.
Conrad Engelke 3m diam. x 2.2m long Autoclave Steam operation Design pressure 7bar Design temp 169deg C Volume 19m3 Length of rotating steel tube 1320mm With new Control Panel Complete with full documentation
Dry agent mill Manafacturer: Condux Item no.: 5988 Type: CUM 100 Year of construction: 1992 Power: 1.1 kW with hopper(diameter 330 mm, height: 400 mm) with control cabinet, cable & plug on mobile frame (castors attached) LWH: 850 x 550 x 1550 mm
Continuous Mixer (UP1) Manuf.: Pomini Farrel Year 1982 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW Continuous Mixer (UP2) Manuf.: Pomini Farrel Year 1986 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW
InterBus-S, bus coupler -Manufacturer: Phoenix Contact, Interbus -Type: IB STME 24 DO 32/2 Ord.No. 2754370 -Number: 11x available -Price per piece -Dimension: 120/115/H115 mm -Weight: 0.7 kg/pc.
InterBus-S, bus coupler, Interbus -Manufacturer: Phoenix Contact, Interbus -Type: IB STME 24 BDO 16/3 Ord.No. 2751700 -Price per piece -Number: 16x available -Dimension: 120/115/H115 mm -Weight: 0.7 kg/pc.
InterBus-S, bus coupler, Interbus Manufacturer: Phoenix Contact -Type: IB STME 24 BDI 16/4 -Number: 75x available Price: per piece -Dimensions: 120/115/H115 mm -Weight: 0.7 kg/pc.
Tumbler Iglu Scheid with cooling Volume: 250 liters Dimensions: 140x120x195cm Electrical power: 6.5kW/13kW
InterBus-S, bus coupler, bus terminal, bus terminal -Manufacturer: Phoenix Contact, Interbus-S Bus Terminal -Type: IBS ST 24 BKM-T Ord.No. 27 50 154 -Price: per piece -Number: 17 modules available -Dimensions: 115/45/H115 mm -Weight: 0.2 kg/pc.
Air bellows, roller bellows, air cushions -Number: 2 pieces -Manufacturer: Contitech -Type: 644 N -Package price -Weight: 2 kg
Powder disperser Manafacturer: Ystral Type: C18.500 S EXD / Conti-TDS-3 in Ex version Year: 2003 Power: 18.5 kW Engine number: 426634001H on a mobile frame Condition: as good as new with two powder inlets LWH: 1500 x 600 x 1100
Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -right tool -Socket: Ø 50 mm -Weight: 14 kg
maximum number of results exceeded
please refine your search
