hegla gmbh co used for sale

Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type choice: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Description Molinator: In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our sepa ...

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

- The classic must press nominal power up to 180 kg/h engine power press 1.1 (1.5) Muehle 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (Electrical connection 400V 50Hz (Electrical connection 400V 50Hz ( 3 phases) Electrical fuse 16 A Laenge 1000 mm width 900 mm Height 1700 mm Hehe Assumption 1770 mm Weight 216 kg material Polystyrene, basket and Muehle in 1.4301 / AISI 304 Press force 16.1 to Press pressure 320 bar Juice yield up to 65% connection for juice drain 30mm High juice drain 480 mm High marc ejection 580 mm Supplied 1 press bag 60l, 3 inserts 38cm, 3 press inserts made of acacia wood 38cm ; New machine - best condition

with rotary tower for sieve-edge presses (except EBP350) For cleaning and grinding fruit. The pre-washing system is an absolute must for the hygienic processing of fruit. Thanks to the built-in ratz mill with interchangeable sieves, you get the ideal mash consistency for the respective pressing method. Technical data: Rated power up to 6 000 kg/h Power: Elevator 2.2 (3.0) kW (PS) Mill 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 750 mm Width 870 mm Height 2 700 mm Delivery or insertion height 800 mm Weight 420 / 450 kg Material 1.4301 / AISI 304 Connections: Connection for cleaning 1/2" inside Connection for washing container 2" outside Height mash ejection 1 730 mm / with transition 1 510 mm can be used for core fruit Scope of delivery 7, 9 and 12 mm cutting sieve

Rated power up to 300 kg/h engine power Drive motor 0.37 (0.5) Washing machine motor 0.12 (0.16) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1280 mm width 870 mm He he 1350 mm 65 mm width 350 mm Band length 4900 mm application width 240 mm Application shoehe 0-50 (infinite) mm Weight 350 kg Material 1.4301 / AISI 304 Juice yield up to 75% Band speed 2 m/min Contact time 1 min Water consumption for cleaning 2 l/ min Connection for waste water 48.3mm Connection for juice drain 1 High juice drain 420 mm High sewage drain 120 mm Hoehe marc ejection 700 mm ; New machine - best condition

Rated power up to 3000 kg/h engine power Drive motor 2.2 (3.0) Washing machine motor 0.37 (0.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 3035 mm width 2080 mm He he 1690 mm Width 1200 mm Band length 9950 mm application width 900 mm application shoehe 0-65 (5 steps) mm Weight 2500 kg material 1.4301 / AISI 304 Juice yield up to 75% Band speed 0.5-3.5 m/min Contact time 2-11 min Water consumption for Cleaning 6 l/min Connection for waste water 76.1mm Connection for juice drain 11.2 High-gasning 400 mm High-speed wastewater drain 250 mm Hoehe marc ejection 880 mm Supplied high-pressure cleaner, compressor ; New machine - best condition

Rated power up to 1500 kg/h engine power drive motor 0.55 (0.75) washing machine motor 0.12 (0.16) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2538 mm width 1463 mm He 1460 mm mm width 650 mm Band length 8120 mm application width 450 mm application shoehe 0-50 (infinite) mm Weight 1060 kg material 1.4301 / AISI 304 Juice yield up to 75% Band speed 0.9 - 1.8 m/min Contact time 1.9 - 3.8 min Water consumption for cleaning 3 l/min Connection for waste water 75mm Connection for juice drain 2 High juice drain 400 mm Hoehe wastewater drain 210 mm Hoehe marc ejection 840 mm Supplied high pressure cleaner, compressor ; New machine - best condition

Rated power: up to 7000 kg/h Electrical connection: 3 kW 400V 50Hz (3 phases) Electrical fuse: 16 A traege Dimensions dimensions: Laenge: 4 435 mm Width: 2 250 mm Height: 2 160 mm output or drop-in height: 1 430 mm Width: 1 100 mm 320 - 870 mm Application shoehe (infinitely adjustable): 10 - 50 mm Weight: 3 400 kg Material: 1.4301 / AISI 304 Juice yield: up to 80% (depending on fruit type) Band speed: 1.2 - 4.5 m/min Contact time: 1.5 - 6 min Water consumption for Cleaning: 20 l/min (in continuous operation cleaner) Connection: Connection for waste water: 75 mm Connection for juice drain: DN 40 He juice drain: 200 mm High sewage drain: 100 mm Hoehe Marce ejection: 800 mm usable for core and stone fruit Scope of delivery: high-pressure cleaner, compressor Incl. New machine - top condition

Plate apparatus Sigma 37 Manufacturer: API Schmidt-Bretten GmbH & Co.KG Type: Sigma 37 Serial number: 61/28925/06 Output: 18,000 l / h Year of construction: 1978 Product: Solution 60% TS Temperature: 20 ° C - 95 ° C Max. Betreibsüberdruck: 10 bar Chamber: Serial number: 61/17825/04 Output: 18,000 l / h Holding time: 40 s Year of construction: 1978 Max. Operating pressure: 6 bar Tension: Initial size (new seals): 1.345 mm Biomass (seals consumed): 1,277 mm Movable lid.

Rated power: up to 3000 kg/h Electrical connection: 3.5 kW 400V 50Hz (3 phases) Electrical fuse: 16 A traege Dimensions: Laenge: 3 720 mm Width: 1 730 mm Height: 2 110 mm output or drop-in height: 1 430 mm Width: 660 mm 220 - 440 mm Application shoehe (infinitely adjustable): 10 - 40 mm Weight: 2 200 kg Material: 1.4301 / AISI 304 Juice yield: up to 80% (depending on fruit type) Band speed: 1.2 - 4.5 m/min Contact time: 1.4 - 4.2 m inWater consumption for Cleaning: 10 l/min (in continuous operation cleaner) Connection: Connection for waste water: 75 mm Connection for juice drain: DN 25 High juice drain: 130 mm Hoehe sewage drain: 50 mm Hoehe Marce ejection: 810 mm usable for core and stone fruit Supplied: high-pressure cleaner, compressor Incl. New machine - best condition

Hydraulic unit incl. wiring diagram Manufacturer: Aros Hydraulik GmbH Type: HE160-Z21/V5, 5-VAD22/V5, 5-B3/120-LV6P-so. Engines: Manufacturer: Asea motor Type: MBT 132s Power: 5.5 kW Frequency: 3 ~ / 50 Hz Manufacturer: Dietz-motoren GmbH & co. KG Type: 4001540 441883 Power: 5.5 kW Voltage: 380 V Current strength: 11,8 A Valve block: Manufacturer: Lenze Type: 14 128 10 1 0 S 0 Pump: Manufacturer: Sauer / Daikin Type: J V15SA4CRX85 Maximum pressure: 250 bar Filter: Manufacturer: Argo filter Type: HD 046 056 Capacity: 35 l / min Pressure: 210 bar max. New price: approx. 7900

BECO KD 10 - depth layers Manufacturer: E. BEGEROW GmbH & co. Type: KD 10 Item No.: 22100160 Dimensions: 600 x 615 mm Pack size: 50 pieces Depth layers are still in their original packaging and therefore unused! Therefore new and in very good condition! Price refers to 1 piece.

Eccentric screw pump Manufacturer: Pumpenfabrik Wangen GmbH Type: 50 ST - V2A Serial number: 53-651 Material: V2A Flow rate: 10 m ³/h Operating pressure: 4 bar Revolutions: 470 RPM In very good condition!

3 roles standing mixer with control panel and mixer Manufacturer: King & Günther GmbH Type: Rexoplast Serial No.: 6306075 Year of construction: 1973 Mixer is equipped with Munkadur coating inside! In good condition!

Technical data capacitor volume flow Max: 300 m³/h Capacitor size max in the delivery State: CA. 430 mm x 1610 mm high cylindrical part: approx. Ø 273 mm weight of the Chamber in the delivery State: approx. 80 kg Contents upper part (capacitor): approx. 30 L Content bottom (template container) approx. 28 L Materials elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 ° to 80 ° C condenser vacuum max: 0 to 1000 mbar (absolute) (Suitable capacitor for overpressure!) Tauscher max temperature: 1 ° to 80 ° Equipment heat exchangers: Water Tauscher max water pressure: 10 bar Tauscher material: CU tinned Material capacitor: stainless steel Technical questions or other sizes on request.; ready for operation

Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg

Gas furnace, make VEI type: KA_GB_TO external dimensions (w x h x d): 3000 x 3700 x 2300 mm interior dimensions (w x h x d): 1500 x 2200 x 1500 mm temperature: 300 ° C loading weight: max. 2500 kg circulation fans: 2 x 4,0 kW = 8 kW heating power: 120 kW

Electrically heated chamber furnace, make VEI type: KA_EB_TO external dimensions (w x h X d): 2500 x 2900 x 1700 mm usable dimensions (w x h X d): 1250 x 2000 x 1250 mm temperature: 250 ° C heating power: 24 kW

Gas heated tempering furnace, make VEI type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW loading weight: 3.000 kg gross

Gas-fired continuous furnace, make VEI type: DLO_GB heated length: 4000 mm conveyor belt width: 900 mm emperature: max. 950 ° C

Shaft furnace,make VEI type: SCO_EB height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C

Crucible melting furnace, make VEI type: SO_EB_BU Temperature: 300°C - 1250°C

As a standard solution in the field of vibration screening machine, we offer our VS series, whose complement individual solutions can be worked out. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. As well, our machines of the VS series are characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 3 of sieve decks internal and external screen frames Building 0: 600-1600 mm filter diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

As a standard solution in the field of vibration screening machine, we offer our VS series, whose complement individual solutions can be worked out. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. As well, our machines of the VS series are characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 3 of sieve decks internal and external screen frames Size: 800 screen diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

As a standard solution in the field of vibration screening machine, we offer our VS series, whose complement individual solutions can be worked out. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. As well, our machines of the VS series are characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 3 of sieve decks internal and external screen frames Size: 1000 screen diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

As a standard solution in the field of vibration screening machine, we offer our VS series, whose complement individual solutions can be worked out. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. As well, our machines of the VS series are characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 3 of sieve decks internal and external screen frames Size: 1200 filter diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

As a standard solution in the field of vibration screening machine, we offer our VS series, whose complement individual solutions can be worked out. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. As well, our machines of the VS series are characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 3 of sieve decks internal and external screen frames Size: 1400 screen diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

As a standard solution in the field of vibration screening machine, we offer our VS series, whose complement individual solutions can be worked out. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. As well, our machines of the VS series are characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 3 of sieve decks internal and external screen frames Size: 1600 screen diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

As a complement to our standard solution of the VS series we offer our VD vibration screening machine for protection from screenings with Central infeed and discharge. Here, too, individual solutions and supplements can be developed. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. Our machines of the VD series is also characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 2 of screen decks internal and external screen frames Size: 600 mm filter diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

As a complement to our standard solution of the VS series we offer our VD vibration screening machine for protection from screenings with Central infeed and discharge. Here, too, individual solutions and supplements can be developed. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. Our machines of the VD series is also characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 2 of screen decks internal and external screen frames Size: 800 mm filter diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

As a complement to our standard solution of the VS series we offer our VD vibration screening machine for protection from screenings with Central infeed and discharge. Here, too, individual solutions and supplements can be developed. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. Our machines of the VD series is also characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 2 of screen decks internal and external screen frames Size: 1000 mm screen diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

As a complement to our standard solution of the VS series we offer our VD vibration screening machine for protection from screenings with Central infeed and discharge. Here, too, individual solutions and supplements can be developed. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. Our machines of the VD series is also characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 2 of screen decks internal and external screen frames Size: 1200 mm filter diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

As a complement to our standard solution of the VS series we offer our VD vibration screening machine for protection from screenings with Central infeed and discharge. Here, too, individual solutions and supplements can be developed. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. Our machines of the VD series is also characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 2 of screen decks internal and external screen frames Size: 1400 mm filter diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

As a complement to our standard solution of the VS series we offer our VD vibration screening machine for protection from screenings with Central infeed and discharge. Here, too, individual solutions and supplements can be developed. This is made possible by our modular system. You can buy the technology so exactly, that you actually need in daily practice. Our machines of the VD series is also characterized by constructive benefits as well as simple retrofit solutions. AREAS OF APPLICATION Dry and wet sieving Protection and control screening Dust removal Drainage FACILITIES 1 to 2 of screen decks internal and external screen frames Size: 1600 mm filter diameter OPTIONS Ball tap cleaning Ultrasonic cleaning Crossing facilities flexible hoses Quick release skewers Special enemas or special outlets ATEX

Bei Fragen: 01718367957

Technical data: Nominal power 600 kg/h Power: Drive engine 0.75 (1.02) kW (hp) Brush cleaning 0.37 (0.5) kW (hp) High-pressure cleaner 4.7 (6.4) kW (hp) Electric connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 825 mm Width 1 085 mm Height 1 290 mm Discard or drop-in height 1 290 mm Bandwidth 420 mm Order width 300 mm Order height 10-50 mm Weight (ribbon press) 550 kg Material 1,4301/AISI 304 Juice yield 70% Ribbon speed (infinite) 2.1-5.5 m/min Transcourse time 0.4-1 min Water connection at least G 1/2, "min 12 l/min Height juice drain 305 mm Height Trester ejection 780 mm Can be used for nuclear and stone fruits Included high pressure cleaner, compressor

We offer: Chamber furnace, 1 m³ maximum temperature: 1420° Atmosphere: reducing or oxidizing (both can be used) with CO Analyzer Fiber lining in TOP condition. Including cabinets with rod control (can also in a Siemens control system be converted). The plant is in a very good condition. Offer price: Including delivery free House Germany, installation and commissioning.

Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after a NO-ne ate separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approx. 1 mm grain size. Meaningful use for metal contents up to 60% metal content. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, can be inspected and tested. On request also with camera! If the machine is too small, we build it larger. This is our demo machine. Maximum throughput depends on the material and purpose. Price matter of negotiation!

FRICTION BELT FOR SCREW PRESS DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw presses, riveted, new! -Dimensions: 530 mm i. diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide! We confirm best service and short delivery times.

POTATO BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry.

FEED BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -New, on one side coated, open, 2-ply reinforced, with mounted metal connectors to the endless connect type Aligator RS-62, -Dimensions: length 6500 mm x 400 mm width x thickness 2.4 mm, surface with tunnels and double-sided wedge bar -Tunnel 20 mm high x 330 mm long, distance approx. 500 mm, with 2 wedge bar on the top of the face, edges flush, 6 x 4 mm, green

FEEDING belt feed belt, conveyor belt for t, Posch, Hakki, BGU, splitting machine! Original version for woodworking! Do-it-yourself! DIRECT FROM THE MANUFACTURER! -New, open with mounted alligator connectors, 1-ply reinforced top cover, + bottom cover made of felt, antistatic (also from rubber-Supergrip profile available)! -Dimensions: length heavily 4.420 mm long x width 200 mm x 6 mm Item will be shipped with UPS! On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Endless connection on request. Additional versions, with pimples, Stollen or structured surfaces available. Not is your desired size? No problem! We customize for you! More transport and conveyor belts in all other sizes available immediately . We ship worldwide we deliver worldwide, please ask for shipping costs!

The belt dryer / continuous dryer is used for the continuous drying of coatings on smooth surfaces such as glass. Manufacturer TESOMA GmbH Type LYNX Version 16-E-HHH-X Built in 2008 Bandwidth 1600 mm Flow height 400 mm Inlet length 500 mm 3 hot air segments per 2000 mm Outlet length 500 mm drying temperature 100 °C solvent throughput 7.00 kg/h at minimum exhaust air volume flow 1500 m3/h Tape speed 0.5 - 5 m/min Connected power 89 kW Heating capacity 79 kW total motor power 10 kW (fan and drive) Total dimensions Width: approx. 2400 mm Length: approx. 8800 mm Height: approx. 1800 mm For a visit, please make an appointment.

Used burn-in tunnel kiln for drying or burning products made of glass, ceramics or similar things. A total of up to 8 ovens are for sale. The belt furnaces were installed in a system for the glass foam (foam shading) production and were in use until the demo days of the complete plant. We also continue to have components of the plant, such as mills, mixers, silos, and conveyor technology. Manufacturer: MUT GmbH Jena Type: BDO 100-150 Built: 2003 Max Temp. 1100°C Connection value: 315 kW Control SIEMENS S7 -300 Length approx. 14 m Internal dimensions: approx. 300 x 1000 mm The ovens can also be used for tempering, glazing, sintering, blowing, drying and cooling of powdery or chunky goods.

Acceptance bunker 3,550 x 6000 x H 1,560 mm, for bulk solids, with 3 dosing screws Universally applicable acceptance bunker for bulk material e.g. grains, wood chips, potatoes, waste... Conveying volume depending on bulk material 1 - 80 m3/h The pick-up bunker is filled from above on a easily accessible side of the acceptance bunker by means of a shovel loader. The access roads and exclusion zones must be marked in order to avoid accidents and damage to the bunker and its extensions by starting up. The three parallel, identical and directly driven snail trees transport the goods through a partition wall to a cross-arranged snail tree. The partition wall prevents the conveyed material from flowing back into the acceptance area. The product is transferred to the connected trough screw conveyor (TS 420 x 7,000) by the frequency inverter-controlled cross-screw, which is desig ...

Cooling screw trough screw double-walled heated or coolable used Manufacturer: BARL Maschinenbau GmbH Type: KT0803F17T50 Built: 2015 Total dimensions of the trough screw approx. 9.5 x 1.3 x 1.6 m Trough length approx. 8000 mm Trough width outside approx. 450 mm Trough depth approx. 600 mm Conveyor length approx. 7000 mm partly double-walled and can be heated or cooled with water Steel screw with cooled shaft Spiral thickness approx. 8 mm Diameter approx. 400 mm Spiral height approx. 100 mm Slope approx. 160 mm Shaft approx. 200 mm geared motor 1.5 kW 6.8 rpm 220/380 V substructure Steel construction approx. 11 x 2.5 x 0.2 m Total dimensions: approx. 11 x 2.5 x 2 m Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Extruder KE 90 x 30-D for manufacturing of von TPE foam and compact profiles screw diameter: 90 mm L/D ratio 30:1 (2700mm) extruder with 11 temperature-controlled zones (electrically heated by fluids) Siemens electric drive, motor 45kW at 2500rpm year of construction 1996, machine in very good condition (preliminary used in test operations) melt application device (gear pump) double profil head (also used for extrusion-coaded framework belts) electric equipment partially available extruder mounted on movable baseplate