hegla gmbh co used for sale

Pressure: 10 bar Motor: 7,5 kW Free air delivery: 1,03 m³/min Measurement (WxHxD): 1171 x 595 x 599 Weight: 260 kg Compressed air connection: 3/4

Pressure: 15 bar Motor: 15 kW Free air delivery: 1,615 m³/min Measurement (WxHxD): 830 x 1570 x 1120 Weight: 473 kg Compressed air connection: 1

Pressure: 10 bar Motor: 5,5 kW Free air delivery: 0,736 m³/min Measurement (WxHxD): 480 x 955 x 907 Weight: 210 kg Compressed air connection: 1/2

Pressure: 13 bar Motor: 4 kW Voltage: 400 Volt / 50 Hz Free air delivery: 0,39 m³/min Measurement (WxHxD): 1240 x 950 x 650 Weight: 246 kg Compressed air connection: 1/2

Lippert belt conveyor GF 15980-750-600 RA2134 Technical data: Conveyor length (NL): 15980 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 15980 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit S ...

Lippert Belt Conveyor Riser with arch and straight GF 6640-650-500 RA1420 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6640 mm (ascending conveyor 5390mm + arch 500mm + upper straight 750mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection  ...

Pressure: 10 bar Motor: 0,65 kW Voltage: 400 Volt / 50 Hz Free air delivery: 0,081 m³/min Measurement (WxHxD): 1260 x 1100 x 570 Weight: 133 kg Compressed air connection: 1/2

Pressure: 35 bar Motor: 11 kW Free air delivery: 0,942 m³/min Measurement (WxHxD): 1300 x 889 x 740 Weight: 260 kg

Pressure: 8 bar Motor: 22 kW Free air delivery: 3,62 m³/min Measurement (WxHxD): 1072 x 1740 x 1060 Weight: 646 kg Compressed air connection: 1

Pressure: 8 bar Motor: 22 kW Free air delivery: 3,62 m³/min Measurement (WxHxD): 1072 x 1740 x 1060 Weight: 646 kg Compressed air connection: 1

Key data: 1200 mm, 400 mm, 425 mm

Inv. Num. : 4455 Type: FZ 16L Producer: CHIRON Created: 1987 Parameters: Control system: Siemens Sinumerik System 3 Work table length: 1880 mm Work table width: 475 mm Mechanical feed length axis X: 1200 mm Mechanical feed length axis Y: 400 mm Mechanical feed length axis Z: 425 mm Machine height: 4000 mm Machine length: 2400 mm Machine width: 2800 mm Machine weight: 3500 kg

Pressure: 8 bar Motor: 30 kW Free air delivery: 5,31 m³/min Measurement (WxHxD): 1615 x 965 x 1448 Weight: 842 kg Compressed air connection: 1 1/4

Pressure: 10 bar Motor: 2,2 kW Free air delivery: 0,246 m³/min Measurement (WxHxD): 1150 x 800 x 770 Weight: 214 kg Compressed air connection: 1

Pressure: 10 bar Motor: 4,4 kW Free air delivery: 0,52 m³/min Measurement (WxHxD): 1895 x 1280 x 720 Weight: 290 kg Compressed air connection: 1/2

Pressure: 10 bar Motor: 55 kW Free air delivery: 8,5 m³/min Measurement (WxHxD): 2040 x 1450 x 1090 Weight: 1498 kg Compressed air connection: 1 1/2

Man 12 Cylinder container for sale. Price: Please Apply Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Pressure: 7,5 bar Motor: 55 kW Free air delivery: 9,81 m³/min Measurement (WxHxD): 2100 x 1720 x 1200 Weight: 2030 kg Compressed air connection: 2 1/2

Pressure: 10 bar Motor: 250 kW Free air delivery: 38,18 m³/min Measurement (WxHxD): 3100 x 2140 x 1910 Weight: 4800 kg Compressed air connection: DN 100

Pressure: 7,5 bar Motor: 55 kW Voltage: 400 Volt / 50 Hz Free air delivery: 9,81 m³/min Measurement (WxHxD): 2100 x 1720 x 1200 Weight: 2030 kg Compressed air connection: DN 65

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Volume flow rate: 7.3 m³/min -Engine power: 45 kW -Max. pressure: 10 bar -Mileage: 65,305 h -Weight: 1200 kg

Key data: 1000 mm, 560 mm, 800 mm

Inv. Num. : 3714 Type: MH 1000 C Producer: MAHO Created: 1991 Parameters: Control system: Philips CNC 432 Hours: 62345 h Work table length: 1150 mm Work table width: 800 mm Tool magazine: 24 pieces Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 3400 1/min Mechanical feed length axis X: 1000 mm Mechanical feed length axis Y: 560 mm Mechanical feed length axis Z: 800 mm Cone: ISO 50 Maximum tool weight: 800 kg Machine weight: 7.3 t Equipment: 3 tool holders

Control load switches, RCBOs, motor protection switches, reversing switches -Type: CG8 D-V226-602 FS1 -without: gearshift knob Price: per piece -Number: 24 switches available -Weight: 0.6 kg

Lippert belt conveyor GF 29400-750-600 RA2131 Technical data: Conveyor length (NL): 29400 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R43DT100LS8/4 Electrical data: 50Hz V380-500, kW 0,66/1,3 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 29400 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mi ...

Lippert belt conveyor GF 19370-750-600 RA2275 Technical data: Conveyor length (NL): 19370 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 19730 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit S ...

Lippert belt conveyor GF 20520-750-600 RA2276 Technical data: Conveyor length (NL): 20520 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 20520 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW:  ...

Tank material: Stainless Steel 304 2B x 3.0mm thk plate. Direct Drive system: 3HP X 415V IE3 6 Pole Flange Mounted Motor c/w TPG helical gear reducer with grease vertical moulting Model: GVS-50-R60, Torque: 1065NM 2 set Stainless Steel Channel Blade c/w Dia. 1.5" SUS304 shaft 2 nos Dia 2" SUS 316 Ball Valve c/w Aluminium Quick Coupler 4 set of 150mm & 76mm x 1800mm M/S Channel as tank support 1 set #100 SUS Removable Filter 14 units internal Dia. 12mm S/S step ladder Tank size: 2400mm (D) x 4500mm (H) Semi-open tank cover with butterfly hinges Completed with Direct drive stirrer system PLEASE CONTACT AARON: 0173698203 (MALAYSIA NUMBER) Located at Factory 42

Lippert belt conveyor GF 20430-750-600 RA2277 Technical data: Conveyor length (NL): 20430 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 20430 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW:  ...

Lippert belt conveyor GF 28100-750-600 RA2142 Technical data: Conveyor length (NL): 28100 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R43DT100LS8/4 Electrical data: 50Hz V380-500, kW 0,66/1,3 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 28100 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mi ...

Transnorm roller conveyor with ejector 6200-700-640 RA2278 Make: Transnorm Running direction: both directions Roller width (RB): 640 mm Nominal/outer width (NB): 700 mm Length: 6200 mm Diameter of rollers: 50 mm Roller spacing: 60 mm Drive: SEW geared motor, RF27 DT80N4/MM07/BW1 Electrical data: V 380, kW 0.75/S1 Frame height: 120 mm Total of 2 dischargers Conveying speed: please contact us Optionally available: Supports Side guides on one and both sides Frequency inverter for stepless speed control Length adjustment (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: nominal voltage: 380-500V condition: very good (used) Conveying length in mm: 6200 Nominal / outside width in mm: 700 Roll width in mm: 640 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m /  ...

Transnorm accumulation roller conveyor 24V 2333-670-655 RA2148 Make: Transnorm Running direction: both directions Roller width (RB): 655 mm Nominal/outer width (NB): 670 mm Length: 2332mm, 4 pieces in stock Roller diameter: 50 mm Roller spacing: 60 mm Roller conveyor motor: SEW roller motor 24V Electrical data: 220V AC supply line drive, via loop-through to each motor controller, 24V light reflector Frame height: 100 mm one element has 3 storage spaces with a size of approx. 800 mm Conveying speed: adjustable in steps with roller drum motor Optionally available: Supports Side guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) nominal voltage: 24V, 220V Conveying length in mm: 2333 Nominal / outside width in mm: 670 Roll width in mm: 655 Roll division in mm ...

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

Roller conveyor length: 2900 mm Wheel width: 700 mm table height: 700 mm Roller conveyor width: 900 mm roll diameter: 140 mm : kg fence: 450 mm 0: kW range L-W-H: 3,0x0,9x1,3 m weight: 0,7 t Length: 3000mm, width: 600mm, height approx. 750 mm, 3500x1200x8500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Carbide coating machine, carbide coating device -Manufacturer: Carbumatic, hard metal coating machine -Type: unfortunately without a type designation -Voltage: 3 x 220-380 V / 50 Hz -Power: 0.4 kWA -Transport dimensions: 470/470/H380 mm -Weight: 49 kg/piece

Potentiometer, controller, motor controller, speed controller -Controller: speed controller -Type: S101A -Number: 11x controllers available -Price: per piece -Dimensions: 160/110/H100 mm -Weight: 0.8 kg/pc.

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, drive motor, control block, hydraulic control block, control unit, control valve -Manufacturer: Linde, hydraulic control block, control unit, control valve for Linde H30 forklifts -Valves: see photos -Dimensions: 440/185/H900 mm -Weight: 10.8 kg

Key data: 510 mm, 510 mm, 510 mm

Inv. Num. : 7409 Type: ARROW 500 Producer: CINCINNATI MILACRON Created: 1996 Parameters: Control system: ACRAMATIC A 2100 Number of stacking positions: 21 Work table length: 700 mm Work table width: 520 mm Maximum table load (uniform): 350 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: CAT 40 Machine height: 2650 mm Machine length: 2700 mm Machine width: 2000 mm Machine weight: 3050 kg Equipment: Tool Holder

We sell 2x Knorr-Bremse compressors here. The following data: Suitable for RVI MIDLUM PREMIUM Manufacturer Part Number: KNORR LK4944 | K017527X00 Compressor-Air, Capacity 720cm³, Number of Cylinders: 2, Cooling: Liquid, Price is unit price. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response te ...

Ramatik 1200 egglayer, fully automatic, Siemens Simatic PLC, very good condition, including packaging device , year of construction 2004 as well as 10 moulds consisting of: - hollow block 38 x 22 x 25 cm, 2 moulds - hollow block 38 x 22 x 30 cm - ceiling block - intermediate wall block 50 x 20 x 8 cm - column 25 x 25 x 25 cm - shuttering block 15 - shuttering block 20 - shuttering block 25 - shuttering block 30

Process chiller / chiller air-cooled, Type: CYGNUS TECH CYT 081-BIO – 19.8 kW Manufacturer: MTA S.p.A. CYGNUS TECH CYT 081-BIO are compact water cooling units designed for outdoor installation down to -20°C suction temperature. Including crank tub heating, buffer tank and built-in P1 circulation pump --Optimized for biogas cooling-- Cooling capacity kW 19.8 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 3.43 Head available bar: 2.03 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 10 Max. Current (A) 19 Starting Current Circuit (A) 102 Protection class: IPX4 Dimensions: Length mm 1960, width mm 810, height mm 1203 Weight kg 457 Connection R 1"1/4 Serial No.: 2200430168 Year of construction 2025 Condition: Optical 1, Technically ok (Bearing Machine)  ...

PADE Trimming-Milling-Drilling Machine Model 1000/N: - Self-sliding worktop - Header blade D=400mm, 3 hp motor - milling machine with shaft D=30mm, motor hp 5 - 5-spindle drilling machine, 360° swivel, 3 hp motor Machine not according to CE standards, for export

Offer : Manufacturer : BSS Material Flow Model : SPC 1700-600-A4-2T Type : Spiral Conveyor Belt width 600mm Device available from 01.08.2025 Total available Almost identical 3 piece(s) -------------------------------------------------------------------- Furthermore, from location . Fully driven roller conveyor Approx. 670m total length Year of construction 2017 Roll width 600mm Consisting of - Different element lengths : 3m elements / 2m elements / 1m elements - 16 scales - 15 curves of 90° each - approx. 20 rollers stroke - turner / corner turner - 3 x Apollo spiral conveyors Location : 42781 Haan Ready for collection from 01.08.2026

Key data: 1050 mm, 530 mm, 510 mm

Control Mazatrol ... MATRIX 2 Clamping table surface ... 1300x550mm Axis X ... 1050mm Axis Y ... 530mm Axis Z ... 510mm Spindle speed... 10-12000r/min. controlled axes ... 3 cooling... 15bar ISO 40 Max. table load ... 1200kg Magazine slots ... 30 Machine weight ... 7700kg The machine is in good condition, possible to test under electricity.

Various compressors are offered, including those from the company Bock, used. The equipment is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are understood as net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take them back. The offers are subject to change, subject to error and subject to a possible intermediate sale. Our terms and conditions also apply to every sale, to which we expressly refer

RECON -Part Number: 1612500 -Gas ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

COPY SHAPER machine PADE UINZE 2300 2T second hand machine machine for simultaneously shaping both sides of the treated piece of wood. the machine is suitable for the production of chairs, tables, beds, armchairs and furniture elements in general. technical details : machine composed by 2 units : 1+1 shaper units . motor power Hp 5,5 each one max. working useful length mm.2500 max. working width mm. 360 max. working heigth mm. 160 speed rotation shaper units rpm 8500 hydraulic carriage forward speed mt./min. 0 / 25 hydraulic carriage return speed mt./min. 40 hydraulic pump motor power Hp 5,5 net weigth kgs.2600 volt. 380/50

Manufacturer: York Type: YCWZ44CBO-50PA Year of construction: 1997 Machine weight: approx. 1700 kg Dimensions of machine approx.: Length: 3050 mm Width: 1100 mm Height: 1620 mm with control cabinet from the conversion of buildings

Wir bieten ein gebrauchtes Kühlhaus und Gärschrank an. Abholung aus Deutschland. Price 3000 Euro aus Deutschland.

Gebrauchte Ladentheke / Kühlschrank zu verkaufen. Verhandelbarer Preis