hegla gmbh co used for sale

Transnorm roller conveyor TS 2800 sorter switch 1980-1250-1150 RA1999 Make: Transnorm Roll width (RB): 1150 mm Nominal/outer width (NB): 1250 mm Length: 1980 mm Diameter rollers: 50 mm distance between rollers: 76 mm Roller conveyor motor: 2x SEW drive motor Angle of the rollers is adjusted pneumatically (see pictures) conveying speed: approx.1,73m/s maximum recommended box/package width: 400 mm Theoretical sorting speed at 600 mm crate length: ca. 4250/h Included: Side guide included on one side Control valve Optionally available: Supports Side guides on both sides Conversion to box width up to 500 mm Barcode scanner Control system (stand-alone unit) System optimization (e.g. replace valves, dual solenoid valve, forward conveyors, frequency converter) for higher flow rate 6000 and more Features: For individual, expert advice, simply get in touch with us. Simply contact us by phone or ...

Safety control -Batch: E230224-807 Price: per piece -Quantity: 12 available -Weight: 0.2 kg

Safety control -Type: PSS SB DI16 -Weight: 0.5 kg

Safety control -Type: PSS SB DI808 -Weight: 0.5 kg

Safety control -Type: BH5919.54/001 -DC24 V AC 50/60 Hz 230 V -Weight: 0.5 kg

Compressor control, compressor control, base load switching circuit -Compressor control: for circuits with multiple compressors -Handover in its current condition as inspected -Dimensions: 220/320/H140 mm -Weight: 4 kg

ID2954 Niemeyer manhole finisher year/Year of construction 1996 Manhole finisher, with conveyor belt, vibrator, outlets, wall traverse, filling carriage, manhole inserts (worth approx. 23,500 euros), accessories Shaft ring paver, with feed belt, vibrator, outlets, wall traverse, filling trolley, shaft inserts (worth approx. 23,500 euros), accessories

Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: HROt-48/k,ap -Setting value: from 0 to 1200 C NiCr-NiK -5 A, 230 VAC-ohm load -AC 48..63 Hz, 230 V 4 VA -Price: per piece -Quantity: 6x Available -Weight: 0.5 kg

Process controller, controller, temperature controller, temperature sensor, setting for temperature -Type: HROt-48/k,ap,os -Setting value: from 0 to 1200 C NiCr-NiK -5 A, 230 VAC-ohm load -AC 48..63 Hz, 230 V 4 VA -Price: per piece -Number: 4x available -Weight: 0.5 kg

Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: SR71-8Y1-1C Price: per piece -Quantity: 7x Available -Weight: 0.3 kg

ID2952 Eirich compulsory mixer 2500 liters compulsory mixer 2500 liters Forced action mixer 2500 liters

Transnorm curved belt conveyor right 90°-800-600-IR600 RA2162 Make: Transnorm Running direction: 90° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1998 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 800 Belt width in mm: 600 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, simply get in  ...

D-SUB plug socket -25 Polling -Type: D-SUB -Quantity: 45x available Price: complete -Weight: 0.5 kg

Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: Sigmagyr RVP210.1 -Weight: 0.8 kg

Combined surge arrester module Blitzductor, Profibus single module, for PLC control, lamp holder -3x: 919670 -3x: 919562 -6x: 919506 Price: complete -Weight: 0.5 kg

ID2953 Henke Variant year of construction 1992/93 Brick Manufacturing Plant with core and attachment, for the production of paving stones, slabs, kerbstones, U and L stones, hollow blocks Board size 1,350 x 1,150mm (approx. 1935 piece) Min. product height 40 mm Max. product height 500 mm Drawing plate function and cross-punch cleaning Vibration HENKE Vibra-Matik with 4 servomotors SEW Renewal of the machine control in 2011 to Siemens S7-400 incl. Board destacking device wet side incl. Conveyor line wet side (V-belt and intermediate chain transport) incl. Conveyor section on the dry side (latch track and lowering ladder outlet) incl. Board turning cross dry side incl. Board stacking device dry side incl. Board package lift truck with transverse traversing platform (board storage) incl. Packaging HENKE incl. drying chamber The machine is in good working condition and can ...

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves -Collet chucks: Ø 6-25 mm -Weight: 2 kg

impressions: 41 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Alcohol numbering unit: optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Core drill, crown drill, masonry drill, core drilling machine, diamond core bit, drill bit -Core drill bit: Ø 150 mm -Drill bit length: 470 mm -Quick-change mount -Weight: 5 kg

Compact flame monitor 8.30 -Type: 8.30 -0-20 mA/1s Price: per piece -Quantity: 2 available -Weight: 1.2 kg

max. exposition size: 70 x 90 cm exposing power: 2,5 kW weight: 189 kg serial no.: 89110195 voltage: 220 V current: 11 A dispersion foil automatic drawer cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Collet chucks: Ø 11-20 mm -Weight: 3.5 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Outer diameter: Ø 42 mm -Thread: M40 x 1 mm -Total length: 116 mm -Quantity: 94 pieces Total price: 100 EUR -Weight: 35 kg

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Clamping sleeves: 28/85 mm Price: per piece -Quantity: 16x Available -Weight: 1.2 kg/piece

stations: 30 Stk. max. speed sets: 8000 /h max. paper size: 35x50 cm incl. BDF bookletmaker + trimmer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: - Mio. max. printing speed sheets: 6000 /h max. paper size: 46 x 64 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grain dryer made of ALU two-column MDB-T 2/9, indirect air heater 2500 KW, heating oil, 2 circulating air fan, exhaust air, dedusted, Weishaupt, trapezoidal cladding Tel. 01715213204

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Cone: Ø B11/B16 -Price: complete -Quantity: 2 available -Weight: 2 kg

- Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - Projection 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm. - Operating voltage 380V-50Hz - Infinitely variable speed adjustment, by means of an adjustment lever - Engine speed in 2 stages, 700/1435 rpm - Tapping device with rotation direction change after reaching the end stops - Coolant device fully installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - Precision machine vice new (test winner)

Qty. 1 Second-hand paper coating machine Mfc.: SBL Model: HCUV-350 automatic coating machine Built: 2003 Max. sheet size: 1060 x 740 mm. Min sheet size: 450 x 360 mm. Max. coating area: 1050 x 730 mm Spot coating Speed: 7200 sh/h Automatic feeder with vacuum IR dryer for better varnish heating UV dryer with 3 lamps and cooling system delivery stacker

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Clamping sleeves: 28 mm Price: complete Quantity: 10 available -Weight: 15 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Sizes: various -Sale: only as a package -Weight: 0.8 kg

Bartscher A120 Convection oven 2012, stainless oven, up to 300,C, timer controls, four trays, 1Ph

Ultraviolet Document Coater Coating speed 11 - 20 m/min. Max. speed 4440 sheets / hour Paper thickness/weight 120 - 350 g/m2 Min. sheet size 216 × 270 mm (A4) Max. sheet size 508 × 710 mm (B2) Automatic setting for coating rollers from 120 up to 350 g/m2. Ait fixing for low weight paper, touch control panel for the operator. Automatic cleaning system.

Stop magnet, pull magnet, eject magnet, stop magnet, locking unit -Type: 50 003-06C1 -Connection: 220 V -Magnetic force: 6.5N Price: per piece -Quantity: 2 available -Weight: 0.4 kg

Level controller -Type: ENH-10 -Number: 2x switches available -Price: per piece -Weight: 1.3 kg

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Evacuators/ Infeeders/ Conveyor systems Manufacturer: Budde Year of construction: 2011 Condition: Good (Used) Colour: Blue -galvanized Total length: approx. 2500 mm Short side (ejector) : approx. 780 mm Total width incl. motor: approx. 1300 mm Straps: 18 pieces - approx. 40 mm wide Conveying width: approx. 1000 mm Stock: 2 pieces Including SEW motor (1.1 KW) Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading y ...

Transnorm belt conveyor belt conveyor 1252-600-500 gate passage RA2049 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1251 mm nominal/outer width (NB): 600 mm 735 with barings belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50Hz Conveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask) Optional: Supports with dempers Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co.  ...

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 4.2 kW -Output: 133 V 200 Hz -Power output: 6 kVA -for: Edge bander, edge banding machine -Weight: 115 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 5.5 kW -Output: 133 V 200 Hz -Power: 7.5 kVA -for: Edge bander, edge banding machine -Weight: 105 kg

Axis control, VT-HNC100-1-14/133, Rexroth, used-function assurance Attention: This is an original product and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production company, - is in very good condition and fully functional, Ensuring function In order to ensure functionality, the buyer must inspect or put the goods into operation when taking them over. In the event of a defect that is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer a maximum of the product price paid to us. For these goods, we have to exclude warranty claims by the buyer for improvement, replacement, subsequent delivery or even for updating in the case of digital components. Liability for direct and indirect consequential damage is  ...

TRIO-Technik belt conveyor GF 2530-940-840 RA1962 Technical data: Conveyor length (NL): 2530 mm stand width (NB): 940 mm Belt width (GuB): 840 mm Overall height (BH): 85 mm Adjusted height: 630 mm Support feet: 2 pieces Conveying speed (v m/s): 0,078 Electrical data: 50Hz V380-500, kW 0,18 / S1 Belt: Green, smooth Year of manufacture: 10/1997 Optionally available: Frequency converter Features: Construction year: 1997 condition: good (used) Conveying length in mm: 2530 Nominal / outside width in mm: 940 Belt width in mm: 840 Driven: YES KW: 0,97 Conveyor speed m / s: 0,078 scope of delivery: including supports and side guides For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Son ...

Transnorm belt conveyor 1200-600-500 RA1987 Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1200 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW-Eurodrive Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,6 m/s Weight: 60 kg Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 1,6 scope of de ...

TGW curves roller conveyors 45° left Order no. 150072 Item 03.0721 year of manufacture: 2012- working width: 345 mm plastic rollers working width: 400 mm metal rollers total width: 480 mm inner radius: 1050 mm speed: 0.45 m / sec lateral guide on both sides Rollers: conical plastic molded rollers: Metal Optional: 3 supports Shipping dimensions: Lxwxh 2200 x 800 x 400 mm: 90 kg Features: Running direction: LEFT Construction year: 2012 condition: very good (used) Nominal / outside width in mm: 480 Roll width in mm: 345 angle: 45° Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,45 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf v ...

Blume transfer roller conveyor slider 90° 1880-610-580 RA2045 Make: Running direction: both directions Roller width (RB): 580 mm Nominal/outer width frame (NB): 610 - 670 mm Length: 1880 mm Roller distance: 75-80 mm Ejector side: both sides Motor: drummotor Interroll 24V Lifter: pneumatic cylinder Currently set high: 875 mm Conveyor speed: freely adjustable with frequency converter between 0.275 and 0.667 m/s Optionally available: Light barrier scope of delivery: supports Features: condition: very good (used) Construction year: 2012 nominal voltage: 24V angle: 4x 90° Conveying length in mm: 1880 Nominal / outside width in mm: 610, 680 Roll width in mm: 580 Roll division in mm: 75-80 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: 0,275 - 0,667 scope of delivery: including supports without side guides For individual, expert advice, simply get in touch with us. ...

Soco Powered roller conveyors roller conveyor 1980-670-610 RA2021 Make: Soco Roller width (RB): 610mm, Rubber rolls Nominal/outer width (NB): 670mm length: 1980 mm Rolls diameter: 50 mm Roller distance 60790/120 mm Overall height frame: 180 mm Drive: Nerimotori Power: 0.37 kW Scope of delivery: without supports Motor segments can be combined with overdrive segments, so one motor can be used to drive several overdrive segments. Optionally available: Supports Side guides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 6000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: Nerimotori KW: 0,37/S1 Ampere: 2,00/1,15 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung s ...