hegla gmbh co used for sale

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo, compact cylinder type ADVU-40-10-PA 156541 -Stroke: 10mm -Piston: Ø 40 mm -Piston rod: Ø 12 mm -Number: 2x cylinder available -Price per piece -Dimension: 62/50/H93 mm -Weight 0.5 kg./pc.

Wittig Compressor ROL 65 Pressure generator from 2000, complete (closed module) 1 available 357 m3/h, 8 bar. Manufacturer: Wittig GmbH Model: ROL 65 Type: piston compressor Serial Number: 920171/17 Flow rate [m3/h]: 357 Pressure outlet [bar]: 8 Power [kW]: 37 Year of construction: 2000 Running hours [h]: – Weight [kg]: 1.071 Dimensions LxWxH [cm]: 111x90x180

Corner transfer pallet transport, overhauled 1400x1400 as well as other transport segments, turning segments, corner converters various manufacturers on request overhauled on request

Refrigerated compressed air dryer from 2004, complete (closed model) 1 available 1100 m3/h, 12 bar Manufacturer: Arctic Star Zander Model No.: AS1100 Type: Refrigerated compressed air dryer Serial Number: 2794660001 Volumetric flow rate [m3/h]: 1,800 Pressure inlet [bar]: 12 Power connection [KW]: 3 Year of construction: 2004 Weight [kg]: 208 Dimensions LxWxH [cm]: 92x97x112

Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, HMI panel, hand-held terminal -Manufacturer: Andras, control panel hand terminal -Type: T-H3LVGA-M7 #0603LV322-U -Total dimensions: 500/460/H110 mm -Weight: 4.8 kg

2 columns punching tool, cutting tool, punching tool, punch, punching die, punching die, column frame -Punching tool: 2 columns -Stroke: 40mm -Stamp: without accessories, see photos -Dimensions: 245/240/H240 mm -Weight: 30 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Conveyor roller: transport roller with bearing block and drive wheel -Diameter roll: 130 mm -Transport width: 1200 mm -Sprocket: Ø 165 mm -Total dimensions: 1365/166/H166 mm -Weight: 28 kg

Key data: 7000 mm, 1600 mm, 800 mm

Complete system with all the accessories necessary for installation and operation, Travel x = 7000 y = 1600 z = 800 / transverse stroke w = 600mm / General overhaul 2007, year of production 1991: New Siemens Sinumerik 840D control system, new drive motors, guide guides refurbished, new control cabinets. ECOCUT 1 was then operated for only a few months / Travel speed 12000 mm / min / w axis 6000 mm / min turntable TDV 2 max. workpiece weight 6t / clamping surface 1000x1000 turntable TDV 3 max. workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angle crank / chain tool change system / plate field / complete housing / Knoll hopper feed / suction / coolant system with belt filter All BWF fixators for the installation of machine bed and plate

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Conveyor roller: transport roller with bearing block -Diameter roll: 108 mm -Transport width: 1200 mm -Total dimensions: 1365/161/H110 mm -Weight: 19 kg

Demag Compressor 080IIH Pressure generator from 1986, complete (closed module) 1 available 505 m3/h, 6 bar. Manufacturer: Mannesmann Demag Model No.: 080IIH Type: piston compressor Serial Number: 920 501 / 78 Capacity flow rate [m3/h]: 505 Pressure outlet [bar]: 6 Power [kW]: 45,5 Year of construction: 1986 Running hours [h]: – Weight [kg]: 1.978 Dimensions LxWxH [cm]: 246x122x143

plastic belt for blocks of max. 600 x 600 mm belt width 600 mm adjustable outfeed height ± 1.900 mm + 500 mm infeed height : ± 800 mm total dimensions : ± 3.900 x 1.000 x 1.900 mm + (500mm adjustable) adjustable speed mobile

InterBus-S, bus coupler, Interbus, Profibus -Manufacturer: Beckhoff, Profibus bus coupler -Type: BK3120 -Quantity: 1 module available -Dimensions: 70/50/H100 mm -Weight: 0.2 kg.

Machine light, machine lamp, work area light, system light, compact light, control cabinet light -Manufacturer: Rittal, control cabinet light type PS 4112 -Voltage: 220 V 20 W -Number: 2 lights available -Price: per piece -Dimensions: 625/40/H100 mm -Weight: 2 kg/piece

SPECIFICATIONS: Machining length: max. 2500 mm Machining width: max. 350-900 mm COMPOSITION: Station I: Milling machine right-left (2 x 11 Kw) Station II: Milling machine right-left (2 x 5.5 kW) Station III: Grinding unit right-left (2 x 3.7 kW) Station IV Grinding unit right-left (2 x 3.7 Kw) EQUIPMENT: 8 pushers for machining 1 hydraulic pump 1 control box 1 control panel 1 protective grille

Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter, electronic temperature controller -Manufacturer: Jumo, temperature controller type GROw-48/2a -Temperature range: °C -Dimensions cardboard: 210/150/H90 mm -Weight: 0.8 kg

CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA, control plug-in cards printed circuit boards -Type: ESC-CI V1.60 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm -Weight: 0.8 kg

Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T

Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Feat ...

Coupling module, Industrial Ethernet Switch, Network Switch, Lan Switch, Coupler, DP/DP Coupler -Manufacturer: Siemens, Simatic S7 Profibus DP/DP Coupler -Type: 6ES7 158-0AD00-0XA0 -Number: 2x couplers available -Price: per piece -Dimensions: 40/120/H80 mm -Weight: 0.5 kg/piece

PLC controller, central assembly, working memory, CPU, central unit, central processing unit, compact unit, compact CPU -Manufacturer: Siemens, Central processing unit CPU 315-2 Simatic S7-300 -Type: 6ES7 315-2AF03-0AB0 -Quantity: 1 module available -Dimensions: 120/80/H125 mm -Weight: 0.5 kg

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WD5-008.151-00 -Quantity: 2x controllers available -Price per piece -Dimensions: 310/60/H180 mm -Weight: 2.5 kg/pc.

150-180kg/batch general overhauled (exact listing on request) For further photos, information or viewing appointments, please feel free to contact us by phone or in writing. Keywords: roaster, coffee, drum roaster, drum, green coffee, roasted coffee, roasting machine, coffee roasting machine, probat

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WPM 311.004-00 -Dimensions: 310/60/H180 mm -Weight: 1.9 kg

Conductivity/MOhm transmitters for inductive and conductive sensors in the field housing. Degree of protection IP 65. Operation with menu navigation and Communication display. Signal outputs: 0/4..20 mA for conduction Ability and temperature, 2 output Contacts. Continuous polarization compensation. Adjustable: Monitoring of the USP limit, concentration measurement of customer-specific media, Characteristic curves for current outputs.

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with electric drive -Roll width: 800 mm -Roll diameter: 110 mm -Axle distance: 200 mm -Drive: SEW-Eurodrive 0.37 kW 1415/64 rpm -Speed: 24 m/min -Total dimensions: 7370/1300/H1080 mm -Weight: 730 kg

Roller conveyor, conveyor track, roller conveyor belt, roller track -Handover: in current condition as seen -Conveyor rollers: 1 piece is missing, see photos -Roller conveyor: not powered -Roll width: 740 mm -Diameter roll: 90 mm -Center distance: 610 mm -Total dimensions: 6020/960/H845 mm -Weight: 400 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from DMT CD320 cycle lathe -Type: MOD13/1X0296-029 -Contr: TD M3..-020-300-WO -Dimension: 330/70/H390 mm -Weight: 6.4 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller from DMT CD320 cycle lathe -Type: MOD13/1X0314-028 -Contr: TD M3..-020-300-WO -Dimension: 330/70/H390 mm -Weight: 6.4 kg

Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller -Manufacturer: AEG, thyristor power controller -Type: Thyro-A 1A 400-60 100A -Quantity: 2x power controllers available -Price per piece -Dimension: 175/85/H170 mm -Weight: 2.2 kg/pc.

Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller -Manufacturer: AEG, thyristor power controller -Type: Thyro-A 1A 400-60 80A -Quantity: 1x power controllers available -Price per piece -Dimension: 175/85/H170 mm -Weight: 2.2 kg

Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter b ...

Mecalux roller conveyor roller conveyor continuous weighing scale 1050-735-650 RA1913 Make: Mecalux Roller width (RB): 650 mm, Steel rolls Nominal/outer width (NB): 735 mm length: 1050 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s including scale display, 6 Outputs for controling and measurement data forwarding to PLC Measurement accuracy: 50 g Scope of delivery: with supports Optionally available: Side guides on one-sided or both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 Electric data: 24V ITOH-Deki condition: very good (used) Conveying length in mm: 1050 Nominal / outside width in mm: 735 Roll width in mm: 650 Roll division in mm: 75 Driven: YES sco ...

Control cabinet, distribution cabinet, TS control cabinet, modular cabinet, server cabinet, system cabinet, modular system, modular cabinet system, single system cabinet -Manufacturer: Rittal, System single cabinet, unused -Type: X 2-door -Dimensions: 1200/520/H2000 mm -Weight: 166 kg with pallet

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile racks, support arm trolleys -Transport trolley: commission trolley, double-sided support arm trolley -Total length: 1500 mm -Width: 1175mm -Height: 1920mm -additional holders: see photos -Weight: 70 kg

CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/130/H240 mm -Weight: 5 kg

Transnorm Rising falling Incline belt conveyor GF 7200-600-500 RA2053 Technical data: Conveyor length (NL): 7200 mm (3800 mm + 3400 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7200 Nominal / outsid ...

Gate valve with flange connection, disc valve, flap valve, ball valve, butterfly valve, globe valve, gate valve, ball valve with flange connection -Manufacturer: Böhmer, ball valve with flange connection -Type: FKK V 015.6430 -Size: DN100 PN016 -Dimensions: 220/190/H260 mm -Weight: 27 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Transport roller: Diameter 320 mm -Transport width: 600 mm -Shaft: Mounts Ø50 x 95 mm -Quantity: 1x transport roller available -Dimensions: Ø 320 x 790 mm -Weight: 70 kg

Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Flange connection: T-piece -Type: DN100 -Hole circle: Ø 180 x 18 mm -Dimensions: 450/230/H360 mm -Weight: 34 kg

Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Flange connection: T-piece -Type: DN100 -Hole circle: Ø 180 x 18 mm -Dimensions: 450/230/H360 mm -Weight: 45 kg

Lippert Rising falling Incline belt conveyor GF 7000-900-800 RA2055 Technical data: Conveyor length (NL): 7000 mm (4960 mm + 700 mm + 1340 mm) frame width (NB): 900 mm belt width (GuB): 800 mm Overall height (BH): 120 mm, 430 mm with motor Angle: about 15° ( 2 x 7,5° ) Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7000 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine ...

Motion06 angled-belt conveyor 30° 1615-1150-1050 RA1338 Exhibit Make: Motion06 Year of manufacture: 2017 Inlet angle: 30 Length: 1830 mm angle inlet and 700 mm full width, total length 2530 mm Belt width (RB): 1050 mm ( 20x 40 mm ) Frame height: 150 mm Nominal/external width (NB): 1150 mm Adjusted height: 560 mm Conveying speed: V230/400 kW 0,75 Overall height side wall: 300 mm Scope of delivery: with motor, supports and side guides (if required, please ask) Features: Construction year: 2017 scope of delivery: including supports and side guides angle: 30° KW: 0,75/S1 Electric data: 220-240, 380-400 condition: Ausstellungsstück Antrieb: SEW Getriebemotor Optional erhältlich: Frequenzumrichter Conveying length in mm (NL): 1615 Frame width in mm (NB): 1150 Belt width in mm (GuB): 1050 Bauhöhe in mm (BH): 150 For individual, expert advice, simply get in touch with us. Simply contact u ...

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 313 mm -Transport width: 750 mm -Shaft: Mounting Ø50 x 70 mm -Quantity: 1 piece available -Total dimensions: Ø 313 x 935 mm -Weight: 77 kg/

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit, tool heater -Manufacturer: PSG, temperature control unit for tool heating with up to 8 control zones -Type: RSD II 8 -P max: 21 kW -Dimensions: 490/400/H490 mm -Weight: 30 kg

Humidifier, Humidifir, Humidificateur, Hymidificador, Humidifier Base Board, Steam Generator Board -Manufacturer: Hygromatik, MP humidifier control display -Type: MP E-2522450 -Dimensions: 155/50/H95 mm -Weight: 0.3 kg

CNC control, control panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control -Type: LE 407 A 236 484 10 -Individual components: see photos -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

Mecalux roller conveyor 2625-540-450 RA1903 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm length: 2625 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 5x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 Electric data: 24V ITOH-Deki condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 540 Roll width in mm: 450 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be ...

Mecalux roller conveyorRoller conveyor 2100-540-450 RA1906 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm length: 2100 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 4x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Electric data: 24V ITOH-Deki Construction year: 2017 condition: very good (used) Conveying length in mm: 2100 Nominal / outside width in mm: 540 Roll width in mm: 450 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-m ...

Mecalux roller conveyorRoller conveyor 1350-540-450 RA1908 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm length: 1350 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides 50,00 Euro p. lfm plus VAT Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Electric data: 24V ITOH-Deki Construction year: 2017 condition: very good (used) Conveying length in mm: 1800 Nominal / outside width in mm: 540 Roll width in mm: 450 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply ...

Container, granule container, storage tank, powder container, storage tank, color powder container -Container: Stainless steel container with sieve insert -Capacity: approx. 500 liters -Strainer: Ø 10 mm -Container contents: color powder -Dimensions: 1070/860/H950 mm -Weight: 201 kg