Key data: 3200 mm, 750 mm, 695 mm
Basic machine data Used 5-axis machining center from HEDELIUS Make: HEDELIUS Type: Tiltenta 7 Magnum Year of Make: 2016 Condition: very good Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain Travel: x-axis: 3200 mm // y-axis: 750 mm // z-axis: 695 mm Technical data: • Spindle: 50-12,000 rpm • SK40 interface • Fixed machining table with integrated NC rotary table • Ø table: 750 mm • Max. workpiece weight: 800 kg • B-axis infinitely variable: + 98°/- 98° • 50-fold tool changer • Max. tool length: 330 mm • Feed speeds: up to 40 m/min • IKZ (internal coolant supply) • 500 L tank with paper belt filter • Chip conveyor Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
CNC Machining Center Hedelius C60S -1200 Control: Heidenhain iTNC 530 Year of Make: 2016 Travels: X-axis 1,200 mm Y-axis 620 mm Z-axis 520 mm Clamping area: 1,550 x 600 mm Table load: approx. 1,500 kg g Mount: SK 40 Tool magazine: 30 – compartment Spindle speed: 30 - 6,000 rpm Accessories - Screen filter system KM500 - High-pressure pump - Chip conveyors - Machine hood - LTA suction
CNC Machining Center Hedelius C50-1800 Control: Heidenhain iTNC 530 Year of Make: 2008 Travels: X-axis 1,800 mm Y-axis 510 mm Z-axis 480 mm Clamping surface: 2x 1,000 x 510 mm Pendulum operation: 2 x 700 x 510 Mount: SK 40 Tool magazine: 20 times Spindle speed Celox spindle: 50 – 12,000 rpm Accessories - 3D Formingstar Pack - 3D Heidenhain touch probe - Chip conveyors - Partition wall - LTA suction - Water tank high-pressure pump 20 bar - Machine hood
Key data: 900 mm, 850 mm, 700 mm
5 Axis Machining Center Manufacturer: Hedelius Type Acura 85 Control Heidenhain iTNC640 Year of construction 2022 Clamping area 850 x 750 Max. table load 1000kg Travel X/Y/Z 900/850/700 max speed 18,000rpm Tool holder HSK63 80 Compartment Tool Changer IKZ 70bar Chip conveyor Electronic handwheel Hydraulic zero point clamping system pssend also a magnetic plate 600 x 800mm adapted to the NP clamping system. Hydraulic Vise Schunk 2 x Schunk center clamps 60 HSK 63 Recordings Machine comes from a company liquidation and is in perfect TOP condition. All information without guarantee
CNC Machining Center Hedelius C60P-2000 Magnum Control: Heidenhain iTNC 530 Year of Make: 2009 Travels: X-axis 2,000 mm Y-axis 620 mm Z-axis 520 mm Clamping area 2,500 x 600 mm Mount: SK 40 Tool Magazine: 56 – Tray Spindle speed: 8,000 rpm Accessories: - Chip conveyor AME KB 448 - Paper belt filter AME PS 120 - LTA suction - Machine hood
CNC Machining Center Hedelius C50S - 1000 Control: Heidenhain iTNC 530 Year of Make: 2011 Travels: X-axis: 1,000 mm Y-axis: 510 mm Z-axis: 480 mm Clamping area:1,100 x 510 mm Table load: 600 kg Mount: SK 40 Tool magazine: 20 – compartment Spindle speed: 8,000 rpm Rapid traverse x,y,z: 45 m/min Accessories - Screen filter system KM 500 l / IKZ 25bar - Scraper belt conveyor - Handwheel HR 410 - Machine hood
CNC Machining Center Hedelius C 80-2300 Control: Heidenhain iTNC 530 Year of Make: 2012 Travels: X-axis 2,340 mm Y-axis 800 mm Z-axis 600 mm Clamping area: 2,900 x 750 mm Pendulum machining 2 x 945 x 800 mm Table load: approx. 2,800 kg Mount: SK 40 Tool magazine: 30 – compartment Spindle speed 30 - 8,000 rpm Accessories - Chip conveyors - Paper tape filter system - Handwheel HR410 - Machine hood - 2x LTA suction - Partition wall - Pickup magazine for angle heads
HEDELIUS BC 40 MACHINING CENTER - X 1600 mm - Y400 mm - Z 400 mm SK40 HEIDENHAIN control system
CNC Machining Center Hedelius BC 100 P-3500 Magnum Control: Siemens Sinumerik 840D Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 4,150 x 1,000 mm T-slots 5 pieces Distance T-slots 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Mount: DIN 69871 SK 50 Tool magazine: 50 – compartment Spindle speed: 20 - 4,500 rpm Accessories - Door automation - Handheld operator - Machine hood -Conveyor
Control: Heidenhain iTNC 530 Travel: X-axis F/H: 3,220 / 2,600 mm Y-axis 800 mm + 65 mm Z-axis F/H 850 / 1,000 mm T-slots 7 pieces Mount: SK 40 Tool magazine: 100 – compartment Spindle speed: 50 - 12,000 rpm Equipment - Internal cooling (IKZ) 20 bar - Belt filter coolant 1250 l -Conveyor - Laser Tool Control System TM200 - Rinsing gun - Electrostatic exhaust air filters - Electronic handwheel -Partition - 2x LTA suction - Prepared for 5th axle
Key data: 4 mm, 1 mm, 770 mm
Heidenhain iTNC 530 Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Pendulum operation 2x 1,450 x 1,000 mm Mount: SK 50 Tool magazine: 30 – compartment Spindle speed: 30 - 4,500 rpm Accessories -Conveyor - Electronic handwheel - Coolant filter system -Partition - Vetter gantry crane 2 tons - Benz SK40 angle head with torque arm
Key data: 2300 mm, 800 mm, 600 mm
Control: Heidenhain iTNC 530 Total travels X-axis 2,300 mm Y-axis 800 mm Z-axis 600 mm Fixed table working area: X-axis 925 mm Y/Z axis 800 / 600 mm Clamping area 1,400 x 750 mm Rotary table travels: X-axis 780 mm Y/Z axis 800 / 600 mm Clamping surface Ø 800 x 630 mm Mount: SK 40 Tool magazine: 30 compartment Spindle speed Kessler motor spindle: 50 – 12,000 rpm Accessories - Handheld operator - IKZ with screen filter system 500 liters -Conveyor - 6th axle prepared - Blum Laser - 2x suction - Machine hood
Key data: 1 mm, 650 mm, 530 mm
Control: Heidenhain iTNC530 Travel: X-axis 1,200 mm Y-axis 650 mm Z-axis 520 mm Fixed machine table: X-axis: 570 mm Y-axis: 650 mm Z-axis: 520 mm Number of grooves 7 (â' 14 mm width) Feed X-/Y-/Z: 0 – 45 m/min Clamping area: 760 x 600 mm Swivel table: Clamping surface: Ø 520 mm Mount: SK 40 Tool magazine: 30 compartment Spindle speed: 50 - 12,000 rpm Accessories: - Kinematics Opt - Handheld operator - Screen filter system KM500 - IKZ 25 bar -Conveyor - Blow-off gun - Rinsing gun - M&H workpiece pushbuttons - M&H desktop radio switch
Control: Heidenhain iTNC 530 Travel: X-axis: 600 mm Y-axis: 620 mm Z-axis: 520 mm Clamping surface - rotary and swivel table: Ø600 x 480mm Swivel: +10° / -90° Mount: SK 40 Tool magazine: 30 compartment t Motor spindle white: 50 - 12,000 rpm Accessories -Conveyor - Screen filter system 500 L - IKZ
Milling machining center CNC Hedelius Tiltenta T7-4200
x-travel:2500 mm y-travel:1000 mm z-travel:750 mm table surface area:3220 x 1000 mm Workpiece weight approx.:3000 kg spindle taper ISO:50 milling spindle turning speeds:20 - 5000 U/min feed speeds:1- 30000 mm/min rapid traverse:30 m/min total power requirement:40 kW dimensions of the machine ca.:6,9 x 4,1 x 3,7 m weight of the machine ca.:21 t with CNC HEIDENHAIN TNC 426 30-pockets autom. toolchanger RENISHAW measuring probe coolant attachment with TSC and chip conveyor diverse toolholders
x-travel:800/945 mm y-travel:800 mm z-travel:600 mm spindle motor:27 kW spindle turning speed range:10 - 8000 U/min spindle taper ISO:40 c-axis:360.000 x 0,001 table load capacity:600 kg table clamping surface::800 630 mm total power requirement:55 kW weight of the machine ca.:16 t Machine with Heidenhain iTNC 530 CNC control for 5 axis - pendulum operation with turn- swivil table left and fixed table right - tool changer for 30 tools - coolant device, chip conveyor - complete splash housing
travel -x axis:800/1825 mm travel -y axis:800/460 mm travel -z axis:600 mm Feeding X,Y,Z up to:0 - 40/40/40 mm/min. swival range +/-:+10 bis -90 x 360 Grad Rotary-table:800 x 630 mm number of T-slots:5 T-slot - distance:125 mm T-Slots:18 mm center hole:30H7X15 mm swival range +/-:90 Grad turning speed:20 m/min. Number of axles:3-7 St. Spindle RPM:12.000 1/min max. tool weight:10 kg max. tool length:330 mm diameter of tools max.:80 mm tool changing time:4 sec CNC control with 15.1" color flat-screen 19" machine control panel PCU 50 with Intel Pentium II Windows XP 10.0 GB hard drive
x-travel: 1800 mm y-travel: 510 mm z-travel: 480 mm total power requirement: kW weight of the machine ca.: 5500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Spindle SK 40 - Speeds 8000 Rpm with 165 Nm - Workload 2000 Kg - ATC 56 Positions - Hours spindle 10.304 - Closed housing with automatic top door - IKZ Coolant system - LTA Air Cleaning
This 4-axis HEDELIUS RS 60 K - 2000 was manufactured in 2005. It features a generous X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine can accommodate a maximum workpiece weight of 1000 kg on the fixed table. If you are looking to get high-quality machining capabilities, consider the HEDELIUS RS 60 K - 2000 vertical machining centre we have for sale. Contact us for further details.
This 5-axis HEDELIUS Acura 85 was manufactured in 2021. It features an impressive X-axis travel of 900 mm, Y-axis travel of 850 mm, and Z-axis travel of 700 mm. The machine includes a double-supported rotary-tilt table with dimensions of à 850 à 750 mm and a maximum clamping weight of 1000 kg. If you are looking to get high-quality metalworking capabilities, consider the HEDELIUS Acura 85 vertical machining centre we have for sale. Contact us for further details.
This 5-axis HEDELIUS RS 100 K MAGNUM was manufactured in 2009. It features a travel range of 3500 x 1000 x 770 mm and a rotary-tilting table with a 1200 kg max workpiece weight. The spindle operates at speeds up to 6000 rpm, and the machine includes a 50-tool capacity magazine. If you are looking to get high-quality milling capabilities, consider the HEDELIUS RS 100 K MAGNUM machine we have for sale. Contact us for more information.
- Full enclosure with vacuum extraction - Roller shutter door for crane loading - Pick-Up station for 3 angled milling head - Face machining possible to generously sized areas - Distance spil to table 140 - 740 mm - Pendel screen for splitted manufacturing - Coolant tank filtration 350 Liter - HR410 Handwheel HeidenHain - Double LTA Oil Mist - Flexible, high-precision machining of large and complex parts, with reliable German build quality.
travel -x axis: 1.000 mm travel -y axis: 510 mm travel -z axis: 480 mm travel of - x axis (rotary-tilting table): 420 mm travel - x axis (fixed machine table): 450 mm control: HEIDENHAIN iTNC 530 turning speed range: 50 - 12.000 U/min numbers of positions in the tool changer: 20 tool taper: SK40 table surface area: 650 x 510 mm workpiece weight: 300 kg Clamping surface of rotary-tilting table: 420 mm workpiece weight: 200 kg speeds of rotary table: 30 U/min 5-axis machining center | HEDELIUS - RS505 K IC 40/530/450/420/12, equipped with tool changer, ITC, zero-point clamping system and chip conveyor. In addition, the machine features a full enclosure and an extraction system with filter unit. With only 9,787 spindle hours, the unit shows low operating time. The machine is in a well-maintained condition and can be inspected at any time under power. A machine video can be provided on requ ...
x-travel: 4500 mm y-travel: 800 mm z-travel: 600 mm control: HEIDENHAIN iTNC 530 rapid traverse: 30/40/40 m/min table surface area: 5300 x 750 mm table load: 4,5 t tool taper: DIN 69871-A40 turning speeds: 30 - 6000 U/min spindle motor: 29 kW spindle distance: 325 - 925 mm tool piece magazine with: 30 Plätzen total power requirement: kW weight of the machine ca.: ca. 20 t dimensions of the machine ca.: m equipped with: - CNC-Control Heidenhain iTNC 530 - IKZ 20 bar - NC Swivable Table - Chip Conveyor - Coolant - Tool Changer 30-fold (SK 40) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1800 mm y-travel: 520 mm z-travel: 520 mm control: iTNC 426-M spindle speed:: 8000 UpM rapid travel x/y/z: 30 m/min tool taper: SK 40 table load: 3 t tool piece magazine with: 30 Plätze spindle drive: 22 kW max. torque on the spindle: 220 Nm weight of the machine ca.: t dimensions of the machine ca.: m Machine still in the delivery factory: Electric 400 Volt: Chip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1700 mm y-travel: 400 mm z-travel: 400 mm table surface area: 2x 1100 x 420 mm table load: 500 Kg tool taper: SK 40 control: Sinumerik 810 D Siemens turning speed range - spindle: 30 - 6000 U/min tool piece magazine with: 20 Plätzen Working speed: 1 - 30000 mm/min rapid traverse x / y / z axis: 30 / 30 / 30 m/min total power requirement: 20 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3,8 x 2,8 x 3,1 m Machine still in the delivery factory: Condition: Not more under power: Electric 380 Volt: Chip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Magnum: powerful machining in machine construction and tool making - Sk50 with extremely powerful spindel 50kw - Glas scales in X/Y/Z - Chip conveyor and coolant system
x-travel: 2000 (775 + 600) mm y-travel: 620 mm z-travel: 520 mm Control: Heidenhain iTNC 530 turning speed range - main spindle: 12.000 min/-1 power capacity - main spindel: 18 kW table surface area: 1.200 x 600 mm rotary table diameter: Ø 500 mm swivellable: +15/-95 ° rotatable: 0- 360 ° max. table load: 1000/350 kg tool taper: SK 40 number of toolpositions: 30 pos. internal coolant system feed: 20 bar rapid traverse ( X / Y / Z ): 30 m/min dimensions: 5,0x 2,5 x 3,3 m weight of the machine ca.: 11 t CNC-Machiningcenter Universal, 5-Axis and fixed table Machine overhold for 60.000 € - NC-Swivel-Rotary-Table integrated right working area - Fixed-Table left working area - 4th axis on fixed table 165 centre hight - Chip conveyor - internal coolant - filter - 3D probe - Oil dust collector - 2022/2023 overhold for 60.000 € new slideways aspindles in all axis - electric roof - new spi ...
