heavy duty lathe used for sale

Description: Contains clamping jaws, hand tools, other clamping material ,and jaw chuck Attention: without the clamping heads and driven tools Approx. Onsite Dimension. (l x w x h): 3,700 x 640 x 2,500 mm, weight approx.: 250 kg

max. permitted load per shelf: 1,750 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 1,100 x 3,000 mm, weight approx.: 300 kg

Description: 6 side stands 1000 x 3000 mm approx. 24 crossbars, length 2700 mm Optional 12 side stands 1000 x 2000 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 1,200 x 1,000 mm, weight approx.: 550 kg

Hydraulics Heavy Duty Lifting Cylinder 1 pc. 50to, Euro 400,- 1 pc. 100to Euro 500,- Price per piece

Description: Consisting of: Chassis with drawbar Support castors 2 pieces Heavy-duty castor with turntable, one missing axle Approx. Onsite Dimension. (l x w x h): 800 x 600 x 300 mm, weight approx.: 60 kg

length: 5000 mm payload: 18 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Dimensions of the support surface: 1700 x 600 mm Max. load: 6000 kg Approx. Onsite Dimension. (l x w x h): 3,500 x 650 x 1,900 mm, weight approx.: 150 kg

Heavy Duty Transport Chassis, Armoured Castor, Heavy Duty Castor, 4 pcs PAGUS 350 x 300 x 67 mm Minimum height: 67 mm bearing surface (machine): 350 x 300 mm Mounting thread: M16 x 2.0 / M20 x 2.5 ( in the steel plate ) 2x Bore in the frame: Ø 20 mm Material thickness: 6 mm ( contact surface ), 15 / 30 mm ( frame ) Number of rollers per chassis: 4 pieces Roll diameter: Ø 45 mm Roll length: 120 mm Weight: 20.5 kg per chassis Other quantities on request ! as good as new ! Dimensions ( single chassis ): 350 x 300 x 67 mm Dimensions (packaging): 800 x 400 x 310 mm

Description: Heavy-duty castors, 2 pieces Total capacity 12t. with turntable Load capacity 2 x 6000 kg Wheel diameter 75 mm Total height 105mm Weight 26kg Dimensions L x W x H 300 x 200 x 250 mm Approx. Onsite Dimension. (l x w x h): 300 x 200 x 250 mm, weight approx.: 26 kg

Description: Heavy duty trailer with - Double knuckle steering - small turning circle - Tilt-proof because the steering angle is limited - robust, low maintenance - reversible drawbar, length 1200mm - impregnated wooden pad. Load capacity 15000 kg Length 6000mm Width 2450mm Height 625mm Rear axle: steerable Front axle: steerable Tire dimensions 425 x 260 mm Machine weight approx. ,6 t Space requirement approx. 7.2 x 2.5 x 0.625 mm Approx. Onsite Dimension. (l x w x h): 7,200 x 2,450 x 700 mm, weight approx.: 1,860 kg

Description: Heavy load trailer with - Double turntable steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - Reversible drawbar - 50mm impregnated wood overlay. Pick up only from KW10/11 possible Capacity 10000 kg Length 6000 mm Width 2500 mm Height 595 mm Rear axle: steerable Front axle: steerable Machine weight approx. 1,3 t Space required approx. 6.7 x 2.5 x 0.725 Approx. Onsite Dimension. (l x w x h): 6,700 x 2,500 x 600 mm, weight approx.: 1,330 kg

Description: Heavy duty castors, 2 parts Total load capacity 24t. with turntable Load capacity 2 x 12000 kg Wheel diameter 75 mm Total height 105 mm Weight 40kg Dimensions L x W x H 500 x 300 x 250 mm Approx. Onsite Dimension. (l x w x h): 500 x 300 x 250 mm, weight approx.: 40 kg

Description: maximum loading capacity 14 kg maximum range 1,100 mm arm weight: 32.6 kg. control box: 13.8 kg. rated voltage 100 V-240 V frequency 50/60 Hz, phase 1 full-load current 16A short circuit rating 300 A with 2 gripper arms SCHUNK and integrated camera system plus all safety functions max speed: 1.1 m/ repeat accuracy +/- 0.1 mm. 6 degrees of freedom 6 rotation axes. with integrated color camera for AI Functions incl. remote control and PC with robot software licence installed Note: the robot can also be adjusted manually. The robot was used with no payload in the Showroom. Aprox. 500 h of joint moving time. More details see PDF (1-12 collaborative_robots_datasheet_en.pdf) Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 2,200 mm, weight approx.: 120 kg

Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 3,800 x 2,500 mm, weight approx.: 500 kg

Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 4,300 x 2,500 mm, weight approx.: 500 kg

Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 4,300 x 2,500 mm, weight approx.: 500 kg

Approx. Onsite Dimension. (l x w x h): 3,100 x 3,200 x 2,500 mm, weight approx.: 500 kg

Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 4,300 x 2,500 mm, weight approx.: 500 kg

Description: BITO FO 80S Heavy Duty Rack Approx. Onsite Dimension. (l x w x h): 3,100 x 3,200 x 2,500 mm, weight approx.: 500 kg

Key data: 5000 mm, 4000 mm, 22000 mm

Flat top lathe with plate frame (heavy duty lathe) - Machine was overhauled in Italy in 2014 and stored directly - new electrics (control cabinet, cabling) - Max. turning diameter over the bed carriage 4000 mm - Max. turning diameter 5000 mm - Max. turning length: 22000 mm - Face plates speed range 0.9 - 56 1/min - Face plate diameter 4420 mm - Main motor power 30 kW - Max. torque at face plate 61803 Nm - Max. workpiece weight between tips: 20 t - Max. workpiece weight flying: 12.5 t -two bed slides with 4500 mm swivel length - complete with panel panels - a roller trestle - a tailstock After the overhaul, the lathe was no longer put into operation, but stored directly. The machine is dismantled and stored dry in a hall near Hamburg. The machine can be viewed by appointment. The machine is loaded free of charge with an indoor cran ...

turning diameter over bed: 1090 mm turning diameter over slide rest: 690 mm turning length: 5000 mm spindle bore: 146 mm spindle taper: DIN 55027/15 turning diameter in the gap: 1250 mm bed width: 700 mm quick change tool holder: Größe D1 spindle turning speed range: 3,5 - 1000, stufenlos U/min feeds - longitudinal: 1-3000 mm/min feeds - cross: 1-3000 mm/min rapid travel - longitudinal/face: 6000 mm/min thread - mm pitch: 0,5 - 480 mm thread - inch: 60 - 1/16 Gang / inch. thread - module: 0,125 - 120 voltage: 400 V / 50 Hz main drive: 30 kW Control: total power requirement: 35 KVA weight of the machine ca.: 7,2 t dimensions of the machine ca.: 7,2 x 1,75 x 1,9 m • new heavy duty lathe with infinetely variable rotation speed via frequency converter, • at basic price with normal accessories according to list, • possible special acccessories according to separate make-up. The dat ...

Description: Very well preserved heavy-duty lathe, make Wohlenberg. The machine was partially overhauled in 2013! Details: Model PT1-1070II Year of construction 1989 partially overhauled in 2013 Country of origin Germany CNC control Siemens 840 D extended from 7 m to 11 m turning length Geometry Santer turret Turning diameter over bed 1,070 mm Turning diameter via support 710 mm Turning length 11,000 mm Bed width 710 mm 2 gear stages Speed 3.55 - 710 rpm. Quill diameter 200 mm Quill stroke 350 mm Spindle passage 128 mm Conveyor Drilling rig incl. boring bar length approx. Ø 200 x 2,430 mm Face plate 1,000 mm Bezel 4 quill 500 mm open Main drive motor 71 kW incl. documentation

Description Hoesch MFD CNC Heavy Duty Lathe with Siemens Control Details Face plate Ø 2,006 mm Center height 1,499 mm Reversible saddle Ø 2,235 mm Circulation diameter over bed Ø 2,997 mm Turning length 12,192 mm min/max workpiece held in chuck Ø 457 mm/1,600 mm Maximum workpiece weight 110 tons Speed range 0.5-140rpm (300hp engine) Feed range 0.0118-7.08"/rpm Permanent capacity Ø 356-902 mm Copy depth 508 mm inductive Maximum cutting force 30,000 Nm Double drum with constant capacity Ø 356-902 mm 50 Ton Capacity, Roll Type

SKODA SRM heavy duty lathe Turning diameter over bed 1400mm Turning diameter over support 1000mm turning length 11280mm faceplate 1250mm Workpiece weight in the stands max. 20000kg Bezel 395mm Bezel 620mm workpiece weight 16000kg Total power requirement 40kW

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

Make SKODA type SUA 125 PA built 1992 place of storage from location country of origin Czech Republic delivery time immediately freight base from location Technical details: turning diameter over bed 1500 mm Turning diameter over support 1100 mm turning length 13000 mm Control SIEMENS 820 T plan disc speed range 0.9 - 315 r pmWork unit weight between tips max. 14000 kg Main drive DC 42 kW Total power requirement 65 kW Machine weight approx. t space requirement approx. m Additional information - CNC control SIEMENS 820 T - increased turning diameter 1500 mm - positioning of the flat disc via M-function or manually in typing mode with digital display - other accessories: + belt grinding device + 2 bezels max. 630mm and 4.8t load capacity + 2 roller blocks max. 950 mm and 7t load-bearing capacity - Hydrostatic main spindle bearing

1.1. Tacchi turning lathe Model DB 1900 x 10.000 Series 132 L • CNC Sinumerik 840 DE-SL • Centre height from the ways 1,900 mm • swing over saddle 3,050 mm • Swing over bed, without telescopic covers 3,300 mm • max. work piece weight 40,000 kg • Min. and max. distance between headstock and Tailstock without steady rests 500 – 10.000mm • Main headstock o Diameter face plate 3.000 and additional 1.000mm o Integrated C-Axis o Drive power S1 (100%) 95 kW o Range of spindle speed 1 – 400 rpm o Number of speed ranges 3 o torque 80,000 Nm o Spindle nose DIN 55026 20" o Spindle hole 160mm • Tailstock o Quill diameter 450mm o Quill stroke 200mm o Internal taper Metric 100 at 60° • Equipment o 12-position live tool turret  Station diameter VDI 620mm  Power 18.5 kW  Max torque 400 Nm  Max speed 1,500 rpm o Y-axis  Vertical  ...

Center height 1,500 mm Permissible diameter on the bed 2,400 mm Permissible diameter above 2,200 mm Cross slide Peak width 10,000 mm Permissible workpiece weight 60,000 kg Between tips without lunettes Power main motor 100 kW Total installed power 145 kW Speed range 1-300 rpm Gear stages 3 Max Torque 110,000 Nm Spindle bore 160 mm Accessories: Conveyor Roller buck Two fixed bezels

turning diameter over bed: 1930 mm turning diameter over slide rest: 1520 mm turning length: 5000 mm turning speeds: 0,5-250 U/min spindle bore: 105 mm workpiece weight: 35 t steady: 400-700 mm steady: 700-1200 mm steady: 1000-1600 mm control: Siemens total power requirement: 106 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2100 mm turning diameter over slide rest: 1300 mm turning length: 6800 mm workpiece weight: 25000 kg main drive motor: 140 kW Control: Siemens type: 840 C faceplate: 1100 mm bed width: 2500 mm steady: 800 mm steady: 800 mm steady: 800 mm steady: 600 mm chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1250 mm turning diameter over slide rest: 940 mm turning length: 600 mm centre distance: 6200 mm spindle speed:: 1.6-315 U/min tailstock quill diameter: 200 mm workpiece weight: 30 t workpiece weight max.: 40 t steady: 3 digital readout: total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: 11x2,4x1,9 m drive motor: 75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2200 mm turning diameter over slide rest: 2200 mm turning length: 10000-11000 mm control: Sinumerik 840 D workpiece weight: 70.000 kg faceplate: 2000 mm steady: 2 Torque: 125000 Nm feed: 0,3-4000 mm/min rapid traverse: 4000 mm/min roll stand: total power requirement: 110 kW weight of the machine ca.: 120 t dimensions of the machine ca.: 22x6,2x2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1070 mm turning diameter over slide rest: 710 mm turning length: 11000 mm Control: Siemens type: 840 D bed width: 710 mm transmission ratio: 2 turning speeds: 3,55-710 U/min diameter of quill: 200 mm quill stroke: 350 mm spindle passage: 128 mm chip conveyor: faceplate: 1000 mm steady: 500 mm steady: 500 mm steady: 500 mm offen steady: 500 mm offen steady: 800 mm offen steady: 800 mm offen roll stand: 2 St main drive motor: 71 kW total power requirement: kW weight of the machine ca.: 27 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1800 mm turning diameter over slide rest: 1200 mm turning length: 16000 mm turning dia. in gap: 2300 mm spindle diameter: 150 mm speed: 1 - 300 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1650 mm turning diameter over slide rest: 1200 mm turning length: 7500 mm turning dia. in gap: 2500 mm spindle diameter: 105 mm speed: 3,55 - 180 (x24) U/min voltage: 380 V total power requirement: 45 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over slide rest: 940 mm turning length: 10000 mm turning diameter: 1250 mm spindle diameter: 105 mm speed: 1,6 - 315 (x24) m/min voltage: 380 V total power requirement: 75 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw faceplate Power compound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3000 mm turning diameter over slide rest: 2650 mm turning length: 19000 mm Control: Siemens type: 840 C mm faceplate: 2500 mm turning speeds: 0,65-99,2 U/min Rest: 2 steady: 2400 mm steady: 900 mm steady: 900 mm steady: 500 mm main drive motor: 180 kW workpiece weight: 100 t chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1250 mm turning diameter over slide rest: 940 mm turning length: 10000 mm spindle diameter: 105 mm speed: 1,6 - 315 (x24) m/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1650 mm turning diameter over slide rest: 1200 mm turning length: 7500 mm turning dia. in gap: 2500 mm spindle diameter: 105 mm speed: 3,55 - 180 (x24) U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2000 mm turning diameter over slide rest: 1500 mm turning length: 10000 mm speed: 1,4 - 71 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 920 mm turning diameter over slide rest: 720 mm turning length: 4000 mm turning speeds: 1,4-280 U/min digital readout: Acurite : steady: 640 steady: 500 faceplate: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mm turning diameter over slide rest: 710 mm turning length: 6000 mm Torque: 35000 Nm Height of centres: 550 mm steady: 100-440 mm steady: 280-550 mm steady: 80-300 mm chip conveyor: workpiece weight: 10000 kg workpiece weight in steadies max.: 15000 kg total power requirement: 55 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2100 mm turning diameter over slide rest: 1400 mm turning length: 10000 mm centre distance: 11300 mm faceplate: 1300 mm workpiece weight: 40 t steady: 4 Rest: 2 bed width: 2350 mm diameter of main spindle in front bearing: 560 mm tailstock quill diameter: 480 mm total power requirement: 150 kW weight of the machine ca.: 118 t dimensions of the machine ca.: 20x4x3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1400 mm turning diameter over slide rest: 1000 mm turning length: 11280 mm faceplate: 1250 mm workpiece weight in steadies max.: 20000 kg steady: 395 mm steady: 620 mm workpiece weight: 16000 kg total power requirement: 40 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diameter over the bed 1600mm. Diameter over the slide is 1250mm. Workpiece diameter min, 320mm. Workpiece length 8000mm. Spindle bore 80 mm. The greatest total cutting force is 16 tons. The greatest weight of the workpiece, 40 tons. Power el. drive motor, 76 kW. Machine dimensions: 14520x2965x2330 mm. Machine weight, 61 t.

FEATURES: GIDDINGS & LEWIS 8000 CNC CONTROL, RETROFITTED 2000 55.12" DIAMETER FACE PLATE CHUCK WITH JAWS 16.92" DIAMETER BORING BAR BORING HEADS (2) W-AXIS POSITIONING X-AXIS TAPER FEED PRESSURE MEASURING DEVISE HARDENED & GROUND WAYS COOLANT SYSTEM WITH POLO PAPER FILTRATION PRAB CHIP CONVEYOR SYSTEM CAPACITY: MAXIMUM SWING OVER BEDWAYS 62.99" BORING DIAMETER SOLID BORING 12.4" TREPANNING 2" TO 25" COUNTER BORING WITH PILOT PRE-BORE + 25" MAXIMUM BORING DEPTH, Z-AXIS 396" LENGTH OF BED 1,176" WIDTH OF BED 39.37" MACHINE WEIGHT 180,000 LBS WORK HEADSTOCK: SPEEDS, INFINITELY VARIABLE 1.8-355 RPM SPEED RANGES 4 MAIN SPINDLE DIAMETER FRONT BEARING 11.81" MAIN SPINDLE BORE 6.4" MAXIMUM TORQUE, 31 RPM AT 180 HP 39,900 FT/LBS MAXIMUM WORKPIECE WEIGHT (1) REST 88,000 LBS MAXIMUM WORKPIECE WEIGHT (2) RESTS 110,000 LBS MAXIMUM WORKPIECE WEIGHT (3) RESTS  ...

Wheel lathe Rafamet UBB - 112 , one side of the machine isn't working

SU 125/3000 Swing over the bed 1250 mm Circular diameter above the 940 mm Tip distance 3000 mm Diameter of clamping plate 1250 mm Maximum workload of the workpiece 6000 kg Machine weight approx. 10,000 kg Delivery items of the accessories : - facing head 710 - 3-jaw chuck 630 - steady rests