heavy duty lathe used for sale

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran chiptransporteur De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

S/N:500576 Year of manufacture: 2005 Control system: Siemens Sinumerik 840 Maximum turning length: 710 mm Swing diameter: up to Ø 590 mm Bar capacity (main/counter spindle): Ø 90 mm Number of spindles: 2 (main and counter spindle) Spindle power: 28kW C-axis resolution: 0.001° Axis & Turret Configuration Number of turrets: 2 Stations per turret: 12 Axis travel (approximate): X-axis: 140 mm Y-axis: 180mm Z-axis: 710 mm Rapid traverse rates: 20 m/min Driven Tools (Live Tooling): Available on both turrets Maximum speed: 6,000 rpm Power per driven tool: approx. 6–9.4 kW Rated voltage: 400 V AC Rated current: 123 A Nominal power: 72 kW Phases: 3 Frequency: 50 Hz Dimensions & Weight Footprint (L × W): approx. 5,300–5,900 mm × 2,150 mm Height: approx..2,300 mm Machine weight: approx. 7,800–9,000 kg Chip conveyor   Auction-ID: A7-45794-3

Manufacturer: INDEX Model: INDEX ABC Year of Manufacture: 1997 - With bar feeder and chip removal Electrical Specifications - Power Supply: 3-phase, 50 Hz - Rated Voltage: 400 V - Control Voltage: 24 V - Rated Current: 32 A Synchronous Spindle - Collet Clamping - Max. torque (Md max. 25%): 10 Nm - Max. speed: 4500 rpm - Max. collet diameter: 42 mm - Clamping depth at max. collet diameter: 38 mm - Spindle bore diameter: 15.5 mm - Max. ejector stroke: 36 mm - Max. clamping pressure: 65 bar Synchronous Spindle - Chuck Clamping - Max. torque (Md max. 25%): 10 Nm - Max. speed: 4000 rpm - Max. chuck diameter (external): 75 mm - Max. ejector stroke: 42 mm - Max. jaw stroke: 0.6 mm - Max. clamping pressure: 20 bar Rear Tool Carrier for Backworking Operations - Capacity: up to 5 fixed tools - Capacity driven tools: up to 3 fixed and 2 driven tools - Max. speed (driven tools): 6000 rpm  ...

Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible.

Chuck diameter: 315mm, turning length: 1600mm, swing over bed: 560mm, swing over cross slide: 370mm, control panel: Heidenhain. An on-site inspection is possible.

Connected load: 10kW, control: FANUC Series 0-T, machine type: slant bed lathe. With transformer, hydraulic unit and electrical cabinet with main switch. An on-site inspection is possible.

Chuck diameter: 400mm, turning length: 1000mm, swing over bed: 700mm, swing over cross slide: 400mm, control panel: TRAK 102. An on-site inspection is possible.

Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 560mm, swing over cross slide: 320mm, control panel: Heidenhain. An on-site inspection is possible.

Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible.

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

OKUMA LB15 – CNC Lathe Highlights • Model OKUMA LB15 • Tool turret with 12 tool positions Technical data • Turning length max.: approx. 500 mm • Turning diameter max.: approx. 250 mm • Tool positions: 12 • Machine dimensions: approx. 2600 x 3600 x 1800 mm • Machine weight: approx. 5000 kg • Nominal voltage: 380 V • Phases: 3 • Frequency: 50 Hz • Power consumption max.: 21 kVA Equipment • Tool turret • CNC control • Protective cladding • Chip conveyor Note • Loading must be carried out by the buyer Auction-ID: A7-45863-2

Turned grinding machine OMA COSBO 120 Working length 1200mm Two grinding units Oscillating Polishing Brushes Work after the copier

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45834-256

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45833-327

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45834-327

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-45834-309

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-45833-251

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-45834-251

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-45833-256

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-45833-309

A conventional lathe Zimmermann with some modification measures is available. Turning diameter over bed: 1000mm, turning length: 430mm, distance between centers: 1000mm, 3-support travel: 500mm/300mm/200mm, chuck diameter: 250mm. Documentation available. An on-site inspection is possible.

Vöest, E50/2000, Lining, Multifix, 15KW, Mas. No. 07351501

12-fold VDI tool changer with interchangeable holders (excl. tools) Auction-ID: A1-45793-3

Machine is equipped with: - chip conveyor - renishaw probe system Auction-ID: A1-45752-12

Specifications: - X-axis: 162mm - Z-axis: 750mm - Y-axis: +/- 50mm - C-axis: yes - B-axis: 670mm - sub spindle speed: 4500rpm - sub spindle motor power: 5,5kW - live tooling: yes - live tooling speed: 3000rpm - live tooling type: BMT-55 Machine is equipped with: - Chip conveyor - Bar feeder - live tooling - y-axis - tooling in turret included - pallet with tooling included Auction-ID: A1-45752-10

Unchecked Auction-ID: A1-45973-56

Machine is equipped with: - chip conveyor - renishaw probe system Auction-ID: A1-45752-13

Various Tool Quick Couplers, PARAT, WDR 4 , WDL4, WD4, WB4 , Price per quantity on request

Lathe beds, unused Compakt 5 , Compakt 8, Compakt 11, Super 11, Interchangeable Wheels , Other EMCO Parts: Clamping tables, angle tables, steady rests, lathe spindles, milling spindles, ...

Support, travel carriage of a Schaublin lathe, sgt. Condition, See photos ! Rotatable, feed via lever, infeed, axles are clampable! Is for a lathe brand Schaublin ! Shipping possible !

CNC LATHE Inv. No. 12.711C1 Make MONDIALE Model GALLIC 420 CNC Control FANUC 10TF Serial number CNCG1685B17GE Centre distance 870 mm Max. swing over Bed Ø 420 mm Max. swing over Cross Slide Ø 214 mm Spindle bore Ø 69 mm R.P.M. 45 – 2500 (inf. var.) kW 11 Volts 400 Cycles 50 Including: 6 Pos. turret Coolant Auction-ID: A1-45737-114

CNC LATHE Inv. No. 13.113C1 Make PBR Model T30 SNC x 1500 Control SIEMENS 805T Year 1996 Centre Distance 1.500 mm Max. Swing over Bed Ø 600 mm Max. Swing over Cross Slide Ø 410 mm Max. Swing in Gap Ø 960 mm Spindle Bore Ø 105 mm R.P.M. 47 – 2.000 (in 2 ranges) kW 15/22 Volts 400 Cycles 50 Including: Automatic Turret, 8 positions Enclosed guarding Coolant Auction-ID: A1-45737-172

Inv. Num. : 9082 Type: SKJ 8 NC Producer: TOS Created: GO 2020 Parameters: Control system: MEFI CNC 872 Max. workpiece diameter: 800 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Length: 2000 mm Width: 2550 mm Height: 3700 mm Weight: 10000 kg Equipment: Hydraulic table clamping Electric rotation of the cutter head Ball screws GO 2020: Complete machine overhaul with conversion to a new MEFI CNC 872 control system Conversion from the original hydraulic drives to Yaskawa servo motors New electrical installation New hydraulic system and central lubrication

A cycle-controlled CNC lathe Böhringer is available. Swing diameter over bed/faceplate: 570mm/365mm, center height: 280mm, bed width: 360mm, travel X: 345mm, cross slide dimensions X/Y: 260mm/680mm, bed slide guide length: 520mm, speed: 2500rpm, feed: 50mm/rev, rapid traverse X/Z: 10m/min/5m/min, quill stroke: 190mm, center angle: 60°, max. workpiece weight: 400kg/1000kg/1600kg. Documentation available. An on-site inspection is possible. Expected to be available July 2026.

CONVENTIONAL LATHE Inv. No. 12.959C1 Make MONDIALE Model NEW CELTIC12 Serial number NJC12740731X90 Center distance 500 mm Max. swing over bed Ø 305 mm Max. swing over cross slide Ø 170 mm Spindle bore Ø 28 mm R.P.M. 35 – 1,500 (16x) HP 1.46 Volts 380 Cycles 50 Including: 3-jaw chuck Ø 160 mm Brake Coolant Auction-ID: A1-45737-124

Type: OptiTurn TM3310D metal lathe with digital readout (3-axis) Connection voltage: 400 V Motor power: approx. 1.5 kW Center height: 165 mm Center distance: 1000 mm Max. swivel diameter above bed: approx. 330 mm Max. turning diameter above cross slide: approx. 216 mm Spindle bore: 38 mm Spindle holder: Camlock DIN ISO 702-2 No. 4 Spindle Taper: MK5 Speed range: approx. 65 – 2000 rpm (9 levels) Longitudinal feed: approx. 0.02 – 0.4 mm/rev Cross feed: approx. 0.01 – 0.2 mm/rev Thread cutting: metric and inch Cross carriage travel: approx. 168 mm Travel of the upper slide: approx. 90 mm Tailstock mount: MK3 Pile stroke: approx. 100 mm Guides: hardened and ground prism bed Accuracy (spindle run): < 0.015 mm Dimensions (lxwxh): approx. 1760 × 745 × 1320 mm Weight: approx. 470 kg Features: 1 x Kit 5-piece quick-change holder 1 x Turning Tool Set WP 16 mm 7pcs ...

Description WEILER E110 conventional lathe with automatic cycle Machine unused in the guides, as only plastic parts were manufactured. Details Type E110 Year of construction 1998 Center width 3,000 mm Center height 550 mm Circumferential diameter over bed 1,100 mm Circumferential diameter over face slide 730 mm Bed width 600 mm Spindle head according to DIN 55027/55026 Gr. 15 Spindle diameter in the front bearing 235 mm Spindle bore 165 mm Machine dimensions 5,400 x 2,600 x 2,120 mm incl. documentation

NEW UNUSED MACHINE WITH DRIVEN TOOLING AND Y-AXIS! Specifications: Spindle: - Spindle hole diameter: 65mm - Bar capacity: 51mm - Chuck: 10” - Max spindle speed: 2600rpm Capacity: - Max. Swing diameter over bed: 600mm - Max. Turning diameter: 420mm - Max. Turning length: 550mm - X-axis: 280mm - Z-axis: 650mm - Y-axis: +/- 50mm - C-axis: yes Feedrate: - Rapid traverse X: 20m/min - Rapid traverse Z: 25m/min Turret: - Positions on turret: 12 - Driven tooling: yes - Tool shank: BMT-55 Tailstock: - Tailstock quill taper: MT-5 - Travel: 600mm Accuracy: - Positioning accuracy: 0.008mm - Repeated positioning accuracy: 0.008mm Machine is equipped with: - Chip conveyor - Tool setter - All tooling in turret included - Tailstock - Tooling as showed in pictures Auction-ID: A1-45752-4

CNC LATHE Inv. No. 12.710C1 Make MONDIALE Model GALLIC 420 CNC Control FANUC 10TF Serial number CNCG16AC Centre distance 870 mm Max. swing over Bed Ø 420 mm Max. swing over Cross Slide Ø 214 mm Spindle bore Ø 69 mm R.P.M. 45 – 2500 (inf. var.) kW 11 Volts 400 Cycles 50 Including: 6 Pos. turret Coolant Auction-ID: A1-45737-113

CONVENTIONAL LATHE Inv. No. 13.188C1 Make PINACHO Model S-90/180 Mach.no. 22417 Centre Distance 750 mm Max. Swing over Bed Ø 360 mm Max. Swing over Cross Slide Ø 205 mm Spindle Bore Ø 42 mm R.P.M. 30 – 2000 kW 2.2/3.4 Volts 400 Cycles 50 Including: 3-Jaw Chuck Ø 200 1 x Steady Rest Toopost Rapid Original type A Coolant attachment Auction-ID: A1-45737-179

Specifications: Control: Fanuc 0i-TD Hours: 12009 Capacity: - Swing over bed: 970mm - Swing over cross slide: 600mm - Centre height: 490mm - Width of carriage: 885mm - Width of cross slide: 350mm - Distance between centers: 4300mm - Width of bed: 560mm Headstock: - Chuck size: 605mm - Spindle bore: 153mm - Spindle nose: A2-11 - Spindle speed: 6.5 ~ 600rpm - Spindle power: 22/26kW Turret: - Tool size: 32mm - 4 positions Tailstock: - Quill diameter: 165mm - Quill traverse: 200mm - Tailstock center: MT#6 - Body movement: motorized Machine is equipped with: - 2 chip conveyors - Motorized tailstock body - Steady rest - Tooling as showed in pictures - Auction-ID: A1-45752-7

Turning length 1.545 mm Turning diameter 500 mm (710mm) X-axis 690 mm Y-axis 230 mm Z-axis 1550 mm B-axis 225° C-axis 360° (0.001°) W-axis 1550 mm Spindle Bore Ø 98 mm R.P.M. 36x 30-3000 KW 30/22 Tapid traverse 26 – 40 m/min Auction-ID: A1-45737-1

An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible.

Make COLCHESTER Model BANTAM 2000 Serial number 3/0015/00964 Center distance 750 mm Max. swing over bed Ø 330 mm Max. swing over cross slide Ø 220 mm Spindle bore Ø 32 mm R.P.M. 40 – 2.000 HP 3/2.5 Volts 400 Cycles 50 Including: 3-jaw chuck Rapid tool post Emergency stop. Threading Coolant system Safety protection screen Auction-ID: A1-45737-16

Centre Distance 1.000 mm Max. Swing over Bed Ø 400 mm Max. Swing over Cross slide Ø 200 mm Spindle bore Ø 54 mm R.P.M. 22.4 – 2,000 (24x) kW 5.5 Volt 380 Cycles 50 Auction-ID: A1-45737-150

TEACH IN LATHE Inv. No.: 12.689C1 Make CHEVALIER Model FCL40160 Mach. No. X7895C01 Control SIEMENS 810D Centre Distance 4.000 mm Max. Swing over Bed Ø 1.015 mm Max. Swing over Cross Slide Ø 670 mm Spindle Bore Ø 134 mm R.P.M. 0 – 1.200 kW 22/33 Volts 400 Cycles 50 Including: 1 x Steady Rest Ø 300 mm Chip Conveyor 4 Way Automatic Toolpost Fixed toolpost multifix Hydraulic chuck 380mm Auction-ID: A1-45737-4

CNC LATHE WITH SUBSPINDLE AND Y-AXIS Inv. No. 13.032C1 Make MAZAK Model SQT250MSY Control T-PLUS Center distance 495 mm Max. swing over bed Ø 525 mm Max. swing over cross slide Ø 350 mm Spindle bore Ø 64 mm R.P.M. 35 – 4,000 (16x) kW 18 Volts 380 Cycles 50 Including: 12 pos. A.T.C.(driven tools) Hydraulic chuck Ø250mm Auction-ID: A1-45737-9

TEACH IN LATHE Inv. No. 11.581C1 Make CAZENEUVE Model HBCN S575 Year 1995 Mach.no. 9810 Control SOMAB PL+S3 Centre Distance 1.500 mm Max. Swing over Bed Ø 575 mm Max. Swing over Cross Slide Ø 300 mm Centre Height Ø 250 mm Spindle Bore Ø 51 mm R.P.M. 2 ranges 0 – 3000 kW 18,5 Volts 400 Cycles 50 Auction-ID: A1-45737-102

TEACH-IN LATHE Inv. No. 13.224C1 Make TOS TRENS Model SUI500 COMBI Serial number 69005015010003 Control heidenhain Center distance 1500 mm Max. swing over bed Ø 500 mm Max. swing over cross slide Ø 290 mm Spindle bore Ø 71 mm R.P.M. 8 – 2.800 KW 11 Volts 380 Cycles 50 Including: 3-jaw chuck Emergency stop. Threading Coolant system Safety protection screen problem in cabling Auction-ID: A1-45737-196

Make PBR Model TM200P Centre distance 1.250 mm Max. Swing over Bed Ø 400 mm Max. Swing over Cross-slide Ø 210 mm Max. Swing in Gap Ø 600 mm Spindle bore Ø 55 mm R.P.M. 33 – 1,500 (12x) KW 4 Volts 380 Cycles 50 Accessories: Taper turning attachment Quick change toolpost Coolant Auction-ID: A1-45737-13