heating used for sale

Overview The line can handle 30/50 ltr. KEGs and is equipped for flat, combi and basket fitting. For other KEG sizes the machines can be adapted. The pre-cleaning machine is a 1-head machine with residual pressure test of the KEGs. On the cleaning head, the KEGs are emptied, purged with air to remove the residual CO2, cleaned with mixed water and rinsed with caustic and partially filled. The KRF 401 main cleaning and filling machine runs particularly smoothly due to its special design and is mounted on an open machine base frame. The piping is integrated in the machine. New components have been installed: Media valves, beer valves and new pneumatic valves, make Festo, in stainless steel control cabinets. Original documentation in German, consisting of spare parts lists, operating instructions, hardware and software included. Tech Specs: Capacity: 60 KEG/h 30-50 L KEGs processable Complet ...

Ointment processing plant consisting of a mixing vessel and two batching tanks incl. vacuum pump an piping • Mixing tank RW 1200 S - Agitator 11 kW, nominal speed 1500 rpm, material AISI 316L (1.4404) - Homogenizer 30 kW, nominal speed 3000 rpm, material AISI 316L AISI 329 A/F 51 AISI 316 Ti (1.4404 1.4462 1.4581) - Double jacket for heating and cooling 2-zone heating with temperature control - Vessel product area material AISI 316L / boiler heating area material AISI 321 (1.4541) - Vessel usable volume 1200 ltr. / total capacity 1622 ltr. - Vessel pressure -1/+2,5 bar - Double jacket capacity 90 ltr. / pressure +4 bar • Batch tank MV 1000 - Turbodissolver 5,5 kW, nominal speed 1500 rpm - Vessel net volume 1000 ltr. / total capacity 1320 ltr. / material AISI 316L (1.4404) - Vessel pressure -1/+2,5 bar - Double jacket volume 78 ltr. / pressure +4 bar / ...

1. CONTAINER TYPE LIQUID SPRAY BOOTH Spray booth type : Side draft, enclosed type Air speed : 0,50 m/sec (empty spray booth) EXTERNAL DIMENSIONS Length (mm) : 6.058 Width (mm) : 2.438 Height (mm) : 2.591 INTERNAL DIMENSIONS Length (mm) : 5.900 Width (mm) : 2.350 Height (mm) : 2.390 SPRAY BOOTH BODY Entry doors : 2-leaf hinged door 1x leaf G3 filter for air inlet 1x leaf service and emergency door with a panic bar Body material : Mild steel and rectangular iron tube metar structure Insulation : 50mm PIR polyurethane filled sandwich panels, B1 class flammability Window : 2 set of 600 x 600mm waterproof PVC window Container base : Aluminum sheet, non-slip Lighting system : 2 pcs, 2x36W enclosed type armatures, Ex-proof Zone 2 Lifting : Lifting eyes at the top corner areas, forklift fork openings at the base HEATING SYSTEM Source : Electricity He ...

• For filling and sealing plastic tubes with heating jaws • Manual insertion and removal of tubes, further stations automatic operation • Stations: Filling, heating, sealing with embossing (1-line, max. 8 digits), cutting • Filling range 10-150 ml with piston dosing and rotary slide valve • Output approx. 100-800 tubes/h depending on product and filling quantity • Adjustable heating temperature • 10 tube holder cassettes for tube diam. max. 60 mm • Various tube holders for tube diam. 18, 22, 34, 36 and 40 mm • Electr. connection 220V/50Hz

Overview The brewhouse, including fermentation and storage tanks and a KEG washer, was built in 2013 by the Austrian manufacturer Flecks. The whole equipment is in a very good condition and can be visited. Equipment Mash and brew kettle incl. whirlpool function, agitator, stainless: 1.000 L net Lauter tun, stainless: 1000 L net Calandria system (outdoor cooker), electrical heating, stainless. Integration of existing gas, heating + electrical: 72 kW Vapour-condensation system Whirlpool- system Mash and wort pump: 2,2 kW Hot water tank with electrical heating, stainless: 1000 L, 9 kW Wortcooler GEA 2-stages pT 100, electron. Thermometers Incl. all pipes, fittings, valves in stainless. Full automation upgrade: electrical switch board for full automatic process control switches, fuses: 100 kW Main connection 400 V Emergency switch PC-databus and modem Visualisations and automation software  ...

Conveyor screw, screw conveyor, conveyor technology, pipe conveyor screw, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, screw dryer, drying system, belt dryer for digestate, grain, wood chips, sewage sludge -Screw was designed for a heating plant to discharge the ashes and was not yet in use -Screw tube and screw are double-walled and can therefore be cooled or heated -Execution: stable -Inlet: 1380 x 340 mm -Spout and control flange: Ø 360 mm -Screw and body made of: 30W02/3 -without motor -Screw diameter: 300 mm -Diameter screw tube: 220 mm -Length of screw: approx. 7600 mm -Infeed pitch screw: 55 mm -Outlet slope auger: 215 mm -Dimensions: 9050/610/H1100 -Weight: 2600 kg

Electric heating, electric radiator, heating coil, electric tubular heating element, floor convector -Length: 3900 mm -Width (depth): 260 mm -Height: 145 mm -Price: per piece -Number: 2 pieces -Weight: 41 kg/piece

OKUNO MSC-15 spring coiling machine was manufactured in 1998 in Japan by OKUNO Machine Co. The machine designed for the efficient production of springs from wire with a maximum thickness of 0.3 mm, consists of a wire spool rack with a braking system, a heating device for annealing and a forming machine. The wire processing process begins with taking material from a spool mounted on the machine stand, which is then fed into the heating device to anneal both ends of the spool. The pre-treated material is then fed further into the forming machine, where it is shaped into a spring by automatic cutting and bending. The length of wire feed is regulated by a digital indicator located on the machine frame. Technical data of the OKUNO MSC-15 spring coiling machine - maximum wire feeding length: 10m ± 5 mm - thickness of material: 0.15 – 0.3 mm - material width: 5.0 – 15.0 mm - maxi ...

Machine description - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW Year of production 2015 Dimensions 326x120x220 [cm] Weight 4000 [kg]

Producer: Metalchem sp z o.o. (today ICHEMAD-Profarb sp. o.o., ichemad) A demonstration device, presented at the fair. Product: single-screw extruder with a head with a spiral core Purpose: for the production of single-layer HDPE pipes in the form of granules, up to a diameter of 250 mm The main technical parameters: extruder: - screw diameter 90 mm - the relative length of the screw 30d - barrier type barrier, high-performance for HDPE - installed power ~ 170 kW - design performance ≥ 450 kg / h   Head - number of heating zones 8 - heating power 33.4 kW (230V) - equipment: fitted mouthpiece and a core for the production of Ø180x16,4 pipes   Control system: The extruder is equipped with a microprocessor control and visualization system based on a central Allan Bradley controller with an industrial monitor with a function keyboard with standard contro ...

Line for plastic coating of metal profiles. It has HEADS FOR PLASTICING closed steel profiles with mouthpieces of dimensions 40mm x 60mm and 60mm x 60mm. Mouthpieces can be of any shape for D100mm pipes and 80x100mm profiles But you can cover any profiles. Capacity 45 kg of plastic per hour. Feed rate depends on the profiles, max 45 kg/h. year of construction 2015. Unused, still packed. Steel pipe PVC Coating production line 1 SJ55/25 single screw extruder 2 Coating Mould 3 Steel straighter pipe feeder 4 Water tank 5 Haul-off (2 claws) 6 stacker SJ55/25 single screw extruder Output capacity: max. 45kg/h Screw : Diameter of screw: Ф55mm L/D: 25/1 Material of screw: 38CrMoAl Surface treatment: Nitride processing, thickness: 0.6 ~ 0,8mm, Polishing Max. rotating speed: 50rpm Barrel: Material of Barrel: 38CrMoAlA Inner processing: Nitride with thickness: 0.6 ~ ...

Overview This filtration unit was built in 2016 by Czech manufacturer Bílek Filtry. This machine is like new as it was barely used. Microfiltration can replace pasteurization of the product. This results in lower acquisition costs, lower operating costs and no influence on the taste of the beer due to pasteurization. Techn. Details Max. output when the end elements are fitted (depends on the filtered beer and parameters of the filling line): 18 hl/h (Prepor NG elements: - absolute capture of yeast - reduction of bacteria) 12 hl/ h (Bevpor PH elements: - absolute capture of yeast - absolute capture of beer by harmful bacteria) Number of heated containers 1 Container volume 120 l Heating power kW 12 Water filter assembly Components Micro-filter assembly Consists of two filters - the FMS pre-filter and the FMS final filter Mounted on a common frame and connected by a pipe with fittings Fil ...

Overview This brewery was built in 2017 by the Belgian manufacturer Coenco. The brewery equipment comes from a brewery that started its activities in 2017. Before the installation of the new brewing equipment, the brewery achieved an annual output of over 3000 hectoliters. Techn. Details 10hl Brewhouse Capacity: 1000l Copper cladded Brewhouse Dimensions (LxWxH): (4220 x 2500 x 3500) mm Execution: Semi-automatic (manual butterfly valves) Agitator in mash tank Cutting device in filter tank Wort buffer tank under filter tank: 1100l Whirlpool in mash / boiling tank Rotative cleaning balls Venturi system to condensate vapors Heating: super-heated water with electrical heating elements (72kW) Automation: Siemens S7 Product pump: Inoxpa SE20 or equivalent Hop filter to protect PHE Plate heat exchanger (PHE): Alfa Laval M3 –1500l/h Outlet PHE : DN25 Working platform : with sink 20hl Hot water  ...

1 piece of used heating container (in need of repair / defective) Built in 1992 Manufacturer: Weho Heating medium: Fuel oil Defects: 1. Steam boiler leaking 2. Heating coil hot water leaking. 3. Ignition transformer defective. Location: Chemnitz Available: IMMEDIATELY Price on request Offers and prices are net ex location Subject to prior sale, Errors and/or misrepresentations excepted, without guarantee and/or warranty, Sale takes place in the ACTUAL state

Stove new lamps, rear door new gasket. Oven cleaned and tested. The in-store baking oven "MINI 8 RD" works with a moving baking atmosphere. A rotating axial fan mounted in the underside of the oven directs the air evenly to the baked goods via the heating rods. The special feature of the in-store oven "MINI 8 RD" lies in the second transparent baking chamber door at the back of the oven. This makes it possible to integrate the in-store baking oven into a sales counter and to enable the customer to directly observe the baking process via the glass back wall. The oven is also equipped with a fully electronic pictogram control system, which is particularly distinguished by its simplicity of operation. All functions of the furnace are taken over by this control system, and the necessary operating procedures are thus reduced to a minimum. It enables automatic baking according to programme ...

Water Chiller Kreyer MCK 15.4 kW – 2020 Very good condition water chiller made by German Guantor in 2020. It can be used for cooling and heating of must, wine, beer and other liquids such as cider, carbonated soft-drinks, distillates etc. It has been used less than two years and thus having very low operation hours. Kreyer MCK 110 is very compact water chiller and it consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. The cooling device itself is equipped with a high-efficiency microchannel condenser a very high-performance plate-heat-exchanger. It is also equipped with an electric heating rod for heating of products. Technical characteristics Manufacturer: WGW-Guantor GmbH Manufacturers type: Kreyer MCK 110 Manufacturing year: 2020 Cooling capacity: 15.4 kW at max 32°C ambient temperature C ...

Water Chiller Kreyer MCK 33.5 kW – 2019 Very good condition water chiller made by German Guantor in 2019. It can be used for cooling and heating of must, wine, beer and other liquids such as cider, carbonated soft-drinks, distillates etc. It has been used less than two years and thus having very low operation hours. Kreyer MCK 271-W is very compact water chiller and it consists of a cooling unit in the upper part and a pump plus isolated water tank (made of stainless steel) in the lower section. The cooling device itself is equipped with a high-efficiency microchannel condenser a very high-performance plate-heat-exchanger. It is also equipped with an electric heating rod for heating of products. Technical characteristics Manufacturer: WGT-Guantor GmbH Manufacturers type: Kreyer MCK 271-W Manufacturing year: 2019 Cooling capacity: 33.5 kW at max 32°C ambient temperature ...

Scheugenpflug DOS P016 Piston Feeder Piston dosing system DOS P for a wide range of requirements The piston dosing systems from Scheugenpflug work according to the principle of volumetric dosing, i.e. the dosed amount of material is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material by feeding it from the corresponding material conveyor system. If a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dosing pistons simultaneously push the two components in separate channels towards the exhaust valve, where they only mix in the static mixing tube to form a homogeneous reactive medium. The Dos P016 / 050 / 100 / 300 / TCA piston dosing systems are high-precision volumetric dosing systems designed for pr ...

Kustner-Sterilchoc FP cooking & sterilzation process installation, UHT in continuous mode, enabling to reach an advanced bacteriological stability and security of you finished product. Output: 250 - up to 2.000 kg/h (depending on configuration). Continuous, efficient and flexible production process which can be regulated during production. Advanced economical caloric process balance. Fully stainless steel executed construction. Minimum floor imprint. CIP cleanable. Waukesha lobe pumps, model 034 and 030, year 1999. Control panel with Siemens S5 PLC control for easy control and operation. Including pre-mix vat with 2 stainless steel augers and outfeed lobe pump (Waukesha, model 034, motor 4 kW). Working principle: after the pre-mix is added to the pre-mix vat and melting salt is added, the continuous processing takes place in 3 successive stages; 1st step: heating up to 85/90°C by satura ...

Used STRATOS 10E blow molding machine for the production of PET packaging with a capacity of up to 10L. SMF STRATOS 10E is adapted to the Fi38 thread. Year of production 2016. Set includes: 1. AUTOMATIC PET BOTTLE BLOWING MACHINE STRATOS 10E with a set of molds for 1 format 2. Preform feeder 3. Bottle receiver 4. Power Wizard™ 5. Air recuperation system 6. DR-310 preform basket tipper PRODUCTION DATA • Number of sockets - 2 • Maximum package diameter - 220mm • Maximum packaging height 435mm • Packaging capacity 3.0÷10.0l ELECTRICAL SYSTEM • Voltage (standard) According to PN-EN 50160 • 400V ± 5% for fast voltage changes with an averaging time of 10 ms. • 400V ± 10% for slow voltage changes with an averaging time of 10 min. • Frequency 50 ÷ 60Hz • Connections: Three phases (3P) + Neutral (N) + Protective (PE) • Control voltage 24 V/DC • Ins ...

General SKU418U1309 LocationBarneveld MakeGenser TypePowervap-20-EX No.180100 Year of construction02-2017 Main Features Volume20 Ltr. Specified Features - Rotary evaporator MaterialGlass Information With switchgearcheck CEcheck Mounted on framecheck Mounted on wheelscheck ATEX compatiblecheck Extra SpecificationsPOWERVAP is a patented, fully automated pendulum system rotary evaporator with distinguished vacuum stability and distillation rate. - Automatic filling and draining of the rotating flask (patented) - Automatic emptying of the distillate vessel (patented) - Achievement of the desired product concentration - Precise regulation of the distillation process. Temperature, vacuum, and other process parameters are monitored in order to handle even foaming products reliably. - Computerized reflux and standby option - The rotating flask floats freely in the heating bath  ...

General SKU418U1308 LocationBarneveld MakeGenser TypePowervap-20-EX No.170099 Year of construction02-2017 Main Features Volume20 Ltr. Specified Features - Rotary evaporator MaterialGlass Information Mounted on framecheck Mounted on wheelscheck Total height2 m Weight400 kg CEcheck With switchgearcheck Floorspace2,5x0,9 m ATEX compatiblecheck Extra SpecificationsPOWERVAP is a patented, fully automated pendulum system rotary evaporator with distinguished vacuum stability and distillation rate of factor 5 compare to other rotary evaporators. - Automatic filling and draining of the rotating flask (patented) - Automatic emptying of the distillate vessel (patented) - Achievement of the desired product concentration - Precise regulation of the distillation process. Temperature, vacuum, and other process parameters are monitored in order to handle even foaming products reliab ...

General SKU204U935 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.120712 Pressure Working pressure20 Bar Main Features Heating (medium)Steam Capacity24 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:Water Heating capacity24 kW Electric capacity31,1 kVa, 42,3A With coolingcheck (no cooling compressor) Capacity69,6 kW Temperature+10/+200°C Tank capacity25 ltr. With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2800 rpm Motor4 kW, 340-690 volt, With temperature controllercheck With controlTouchscreen MaterialMild steel Information Year of construction05-2012 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,60x0,36 m Total height1,32 m Weight309 kg Extra Specificationstest pressure 32,5 barTemperature control unitsSingle TemperiertechnikHeat exchangers > Tem ...

General SKU357U920 LocationBarneveld MakeHuber TypeUnistat 510W Mach.No.114158 Pressure Working pressure1.5 Bar Main Features Heating (medium)Electric Capacity12 KW Temp.250 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Thermal oil heatercheck Water heatercheck Electric heatingcheck Heating medium:water or Oil Heating capacity12 kW With coolingcheck Capacity5kW Temperature-50°C+250°C Tank capacityminimal 4,3Ltr. With pumpcheck Capacity105 L/min Motor1,1kW, 220/420Volt With temperature controllercheck With controlcheck Information Year of construction12-2009 Mounted on wheelscheck Total height1,35m Floorspace0,56x0,46m Weight165kgTemperature control unitsHuberHeat exchangers > Temperature control unitsBrand > Huber What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...

This is a Stainless Steel Double Jacket 250liter Vacuum Reactor system used in pharmaceutical or other applications. It is equipped with a vacuum pump able to reach -15psi and heating through oil or water bath. Inside it has a good overhead agitator and an additional bottom stirring system which will not allow any material lay down and stand still. The bottom stirrer is missing its motor but it has ready for connection the cobbler where the motor would fit onto and should be adjusted according the RPM stirring needs of the application. Unit Specifications: - Vacuum Pump with 1hp AEG single phase motor with -15psi (checked to be in working condition) - Agitator Motor with manual RPM regulator (checked to be in working condition) - Double Jacket Oil Heating System with 3 X 6kw resistances (cheched to be in working condition). Total heating 18kw - Capacity 250liter - Stainless Stee ...

Automatic Packaging and ShrinkIng Line Reepack This line is a fully automatic packaging and shrinking line. For a quick overview have a look at the video below. This line consist of the following equipment: Reepack BT 1000 DL Vacuum Chamber belt machine; Reepack ST 80 Shrink Tunnel; Reepack DT 80 Drying Tunnel: 1. REEPACK BT 1000 DL VACUUM CHAMBER BELT MACHINE Vacuum Chamber belt machine suitable for packaging food-stuff in large batches into their bag. An automatic loading conveyor belt permits to move the products in bag and entering in the vacuum chamber for processing. A wide range of bags quality and thikness can be used and in case of shrinkable bags the machine can be fixed in line with an automatic shrinking tunnel and finally an automatic drying tunnel. Technical Data: Vacuum chamber dimension: 1000 x 800 x H250 mm Chamber useful height: 2 ...

Packing machine and heating tunnel - automatic line adapted to packing 1.5 liter PET bottles in 3x2 packages The semi-automatic packaging unit consists of a packing machine and a heating tunnel, intended for packaging in collective packages - PET bottles, jars, cartons, cans, wraps in foil, seals and shrinks in a heating tunnel. Automatic packing machine, welding machine BAT FORUM STM 50x40 / 3RDKx2 - model: BAT FORUM STM 50x40 / 3RDKx2 - year of production: 2004 - max dimensions of the packed product: 1800 mm x 1750 mm - max height of the packed product: 3000 mm - efficiency: 30 welds per minute - installed power: 35KW (operating power: from 10KW to 15KW) - power supply: 380V, 50Hz Efficiency: 30 packets per minute Engines: 2 conveyors - power - 0.37 kW - Type: STKg 63X - 2 cs1, rpm - 2780 Film reel, 4 pcs: (top and bottom) - power - 0.25kW - TYPE - stkG 63X - 4CS1, rpm.  ...

Packing machine and heating tunnel - automatic line adapted to packing 1.5 liter PET bottles in 3x2 packages The semi-automatic packaging unit consists of a packing machine and a heating tunnel, intended for packaging in collective packages - PET bottles, jars, cartons, cans, wrapped in foil, sealed and shrinks in a heating tunnel. Automatic packing machine, welding machine BAT FORUM STM 50x40 / 3RDKx2 - model: BAT FORUM STM 50x40 / 3RDKx2 - year of production: 2004 - max dimensions of the packed product: 1800 mm x 1750 mm - max height of the packed product: 3000 mm - efficiency: 30 welds per minute - installed power: 35KW (operating power: from 10KW to 15KW) - power supply: 380V, 50Hz Efficiency: 30 packs per minute Engines: 2 conveyors - power - 0.37 kW - Type: STKg 63X - 2 CS1, rpm - 2780 Film reel, 4 pcs: (top and bottom) - power - 0.25kW - TYPE - stkG 63X - 4CS1, rpm. ...

Coffee roaster (new, never used before) Capacity: 7kg/batch, 42KG/Hour Voltage: AC 220V 50-60HZ single phase Roast Time: 12-15min/batch Dimension: 15119651638mm Drum motor: 200w Exhaust fan: 200w Cooling mixing: 100w Cooling tray fan: 370w Electric heating power: 12000w Gas heating consumption: 0.5kg/h Heating type: Electric Color: black/silver ADDKA superior motor 310SUS double wall drum Artisan roasting data logging [Bluetooth connect computer]. OBS: Machine never used before, new product and work perfect. Manufacturer in 2023. Product with CE certification and ISO 9001. ACCEPT OFFER.

General SKU394U1129 LocationBarneveld MakeLauda TypeTR400 HHKT-EX Mach.No.HKS08020 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity306.45 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Thermal oil heatercheck Therminol D12 Heating medium:Oil Heating capacity300 kW Electric capacity306,45 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck Capacityunknown Motor5,5 kW, 400/690 Volt, 2880 rpm (EX) Information Year of construction2008 CEcheck Floorspace2,15x1,0 m Total height2,50 m ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are we ...

General SKU394U1128 LocationBarneveld MakeLauda TypeTR400 HHKT-EX Mach.No.HKS08019 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity306.45 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Thermal oil heatercheck Therminol D12 Heating medium:Oil Heating capacity300 kW Electric capacity306,45 kW, 400Volt Temperature-40°C/+200°C With pumpcheck Capacityunknown. Motor5,5kw, 400/690 volt, 2880rpm (ex) Information Year of construction2008 CEcheck Floorspace2,15x1,00 m Total height2,50 m ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

General SKU322S570 LocationBarneveld MakeQVF Glastechnik GmbH (D) TypeWashing, dissolving, filtering, precipitating and recovering installation No.155153/2214 Year of construction1995 Pressure Working pressure0.3 Bar Vacuum possiblecheck Main Features MaterialGlass Motor0.37 KW Specified Features - Glass-lined Reactor Capacity120 ltr (4x), 110 ltr. (1x) Vessel sizesdia. 595x480m (4x), dia. 400x750mm (1x) Max. temperature20 degr. C With propellor stirrer0,37 kW 230/400 Volt 175-775 rpm With paddle stirrercheck Motor0,25 kW 230/400 Volt Speed mixing shaft110-630 rpm Glass Reactors MaterialGlass Information Mounted on legsframe With switchgearas is Weight1800 Kg Floorspace4,6x2,0 M Total height2,3 M Extra SpecificationsQVF Glasstechnik Washing, dissolving, filtering, precipitating, and recovering installation The entire installation is built in a tubular steel  ...

General SKU204U938 LocationBarneveld MakeSingle TypeSTW 200/1-24-60-H2.1 Mach.No.120711 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity24 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:Water Heating capacity24 kW Temperature+10/+200°C Tank capacity25 ltr With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor4,0 kW,400-690 volt, 2950 rpm With temperature controllercheck With controlcheck Information Year of construction5/2012 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,6x0,35 m Total height1,32 m Weight310 kg Extra SpecificationsPower 31.1 kVA, 43.3ATest pressure 32.5 bar Machine casing is not present.Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature c ...

General SKU204U939 LocationBarneveld MakeSingle TypeSTW 200/1-12-25-H2.1 Mach.No.083816 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity12 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:Water Heating capacity12 kW Temperature+10/+200°C Tank capacity24 Ltr. With pumpcheck CapacityQmax 200 ltr/min, Hmax 80m, 2800 rpm Motor400-690 volt, 4,0 kW, 2950 rpm With temperature controllercheck With controlcheck Information Year of construction2008 With switchcheck CEcheck Floorspace1,65x0,32 m Total height1,20 m Weight310 kg Extra SpecificationsPower 18.2 kVA, 26.4A Test pressure 32.5 bar Machine casing is not present. Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand >  ...

General SKU204U940 LocationBarneveld MakeSingle TypeSTW 200/1-12-25-H2.1 Mach.No.083817 Pressure Working pressure20 Bar Main Features Heating (medium)Electric Capacity12 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:water Heating capacity12 kW Temperature+10/+200°C Tank capacity24 Ltr. With pumpcheck CapacityQmax 200ltr/min, Hmax 80m, 2900 rpm Motor4,0 kW,400-690 volt, 2950 rpm With temperature controllercheck With controlcheck Information Year of construction2008 With switchcheck CEcheck Floorspace1,6x0,35 m Total height1,32 m Weight310 kg Extra SpecificationsPower 18.2 kVA, 26.4A Test pressure 32.5 bar Machine casing is not present. Temperature control unitsSingle TemperiertechnikHeat exchangers > Temperature control unitsBrand > Sin ...

Compressed air preparation or atomization optimization, manufacturer: ENSUTEC, type: Airmatic AM 3000W-400-1.3, serial no.: 20170433, max. heating power: 2,500 W, max. permissible heating power: 2,500 W, max. Operating pressure: 8 bar, compressed air heating control: 0..85C, air volume at operating pressure: 2,800 NL/min., max. air volume flow: 3,000 NL/min., with 4 control cabinets, 4 pressure accumulators a. 4-piece, main control cabinet, suitable for 8 spray guns, round and flat jet

Data sheet heating press Oropress Pneumatic press 5 KN / 0.5 tons Press stroke 50 mm Adjustment of the clear height with handwheel and spindle, adjustable from 100 to 220 mm. With top heating plate 120 x 100 mm and temperature control, temperature up to 250 °C. Pneumatic two-hand control with triggering via Festo ZSB. Pneumatic sliding table 180 x 220 mm for loading outside the machine. Machine dimensions W = 1100 mm, L = 700 mm, H = 1850 mm Machine weight approx. 300 kg Movable on castors On request for an extra charge with second heating plate and temperature control at the bottom.

General SKU394U1133 LocationBarneveld MakeLauda TypeTR400 HKT/KT-EX Mach.No.HKS08031 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Thermal oil heaterTherminol D12 Heating medium:Oil Heating capacity-40°C/+200°C Electric capacity12,9 kW, 400 volt (ex) With pumpcheck (2x) Motor5,5 kW, 400 volt, 2880 (EX) MaterialStainless steel 1.4571 (316Ti) Information Year of construction2008 Total height2,45 m CEcheck Floorspace1,75x1,0 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

Potato processing line (French fries and split potatoes),, - French fries - line, Potato (French fries) processing line,, Output: approx. 220 kg per hour based on the end product,, French fries dimension 10x10x60 mm, consisting of:, feed bunker with stone catcher,, Carborundum - roller peeler, number of peeling rollers: 7,, Length of the peeling rollers: approx. 2,700 mm, new rollers, with interchangeable roll set for quick replacement of the rolls,, alluvial basin with discharge - elevator,, Bunker conveyor belt, make Marcelissen, type BNT 350-400, Knife block, make Marcelissen, 11x11 mm, Extension conveyor belt with small container, Marcelissen, Roller sorting table, make Marcelissen, type IR 2000-600, Narrow piece sorter, make Marcelissen, type FR4-1750, Flipmaster, make Marcelissen, type 902 MA, With swiveling supports, Continuous fryer make Riehle, type DLA 300 SC-3, 54 kW, vHi, Wit ...

Description:  ,DESCRIPTION OF THE EQUIPMENT  , The 'SUPER LINE NEW GENERATION' type vacuum forming equipment is suitable for the automatic processing of thermal annealing sheets up to 8mm thickness. Specifically, they are suitable for the production of inner chambers for domestic refrigerators with the use of a few operators. The tools used are designed for positive forming. The automatic operation of the machine requires the manual selector switches to be set in the correct position. The machine is fitted with the following equipment: - Electrical equipment for the control of the manual and automatic operation of the machine, SIMATIC S7-300 'Siemens' PLC and ET200B peripheral modules for the physical operation of the machine and a 'Comi' PLC for the control of the heating panels, using a computer for data input. - Hydraulic unit with 9 Tons of pressure (lower, tool tabl ...

Description: Cogeneration plant for the electricity production from renewable sources The machine was created to be fueled with vegetable oils of rapeseed, sunflower and soybean oil, but thanks to the complex heated introduction system, it can burn animal fats and palm oil. The hourly production of electricity is equal to 940 kw/h The machinery is composed of: power source ,with fuel heating before combustion (underground tanks excluded) WÄRTSILÄ NSD 6R22/26 engine, produced in 1999 with a power of 1,065 kw at 1,000 rpm (power reduced to 940 kw/h to comply with authorisations) alternator DENOX system control panel catalytic silencer with cover and chimney chiller for cooling and heating systems hot water generation system with heat exchanger for powering warehouse heating systems transformer room ,with control panels, Landis+Gyr E650 meter, MESSINA SVT/R+AC/R medium  ...

CONTROLS   PLC SIEMENS S7 300 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE   length: 7000 mm   width: 1040 mm ELECTRICAL SPECIFICATIONS   total power consumption: 145 kW   mains power supply: 267 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 7400 mm   space requirements -front/back-: 2350 mm   total height: 2300 mm   total weight approx.: 8000 kg Continuous conveyor belt 1040 mm wide, separated into 3 lines Process:Stage 1:       Cleaning (65 degrees)Stage 2,3,4:   Rinsing (65, 60, 60 degrees)Stage 5:       Heating air drying (60 degrees)Oil separator: continuous oil discharge Heating:       electrical heating Convey ...

Heating output: 140 kW, heating output switched in 4 stages of 35 kW each, air volume flow of 6500 m³/h, air speed of 9.8 m/s, stainless steel tubular heating element (1.4828) with a surface load of 3.9 W/cm², inlet temperature: approx. 20°C, outlet temperature: approx. 160°C, temperature sensor PT100, EC declaration of conformity. Two identical air heaters are available, with documentation, the heaters are still unused, an on-site inspection is possible.

Feed speed: , m/min. Dimensions (L/W/H): , mm total power requirement: , kw weight of the machine ca.: , kg Year: , 0 Arm length: , mm 1 KUPER veneer splicing machine FW Junior 920 --------------------------------- with air heating system. For sale on behalf of the customer in the IS condition! For assembling veneers with thicknesses of approx. 0.4 - 2.0 mm. A special glue thread is used as the adhesive medium and is zigzag or Wavy line is applied by a heated thread guide. Guaranteed tight joint, high adhesion and tear resistance even with very wavy surfaces Veneer. During subsequent pressing, the glue thread is placed inside. Sanding the adhesive medium is therefore not necessary. Easy to use and efficient way of working Method that has now been proven 1000 times over. Specific features: - Torsion-free C-stand construction made of steel - Resistant PUR paint - Discus disc system with to ...

1 x Farrel Bridge four roll inclined Z formation Calender Year: 1956, Roll dimensions: 710mm dia. x 1675mm wide, Peripherally drilled rolls for heating/cooling, Drive configuration: 250 HP DC v/s motor through unidrive gearbox Roll differentials: 1&2 15%, 2&3 3%, 3&4 3% No. 4 bole speed Max 75m/min Main and auxiliary bearings: Bronze Bush type, Bearing lubrication: Re-circulating oil. Roll heating: High pressure hot water 17 bar capacity. Cheek material guides rolls 1 & 2: Fully adjustable width using 0.75 kW motor. Cross axis – yes (roll 4). Motorised roll nip adjustment – Roll adjustment 1, 2 ,and 4 – 3.75kW motors – Cross axis adjustment roll 4 – 3 kW motor, max adj. 50mm. Hydraulic pull backs – max pressure 70 bar.

Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...

Cat.-Nr. 11-370-2 new double jacket and insulated Volume: 2400 Litres - Parts in touch with product in AISI 316 – other parts in AISI 304 without Heating Jacket Material: Parts that come in touch with the product in V4A (AISI 316) – other parts in V2A (AISI 304) Max.Working Pressure. 0,49 bar Surface fully pickled, passivated and neutralised Insulation with Mineral Wool for Hot Water Tanks Thickness = 80 mm Standard Equipment: Manhole on the top Air Release and Pressure Valve in PVC Manhole inside oval 400 x 350 and Manhole outside rectangular for insulation jacket Sample Valve Level Indicator 24 mm Ladder Support Outlet Discharge with Outlet Pipe DN 50 Digital Thermometer Clear Outlet DN 50 Transport Hooks with Insert Heating Element 230/400V, 7,5 kW Diameter: 1350 mm Height: 3130 mm Cyl. Height: 2160 mm F ...

Ladies and gentlemen, Below we can offer: Manufacturer: Make: 1 piece used continuous furnace, make: Safed Type: 11Bd40/24 Built: 2005 max. working temperature: 1100C Heating capacity: 60 kW Dimensions Length: 15,000 mm Usable width: 340 mm Useful height: 150 mm Heating chamber length: 2,380 mm Muffle, cooling channel new Prices and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty e ...

Ventilation system York for heating and cooling. Heating 64 KW with gas burner. Cool 33 KW with 2 cooling compressors. 8,500m3/h air mend. The devices are new, never run, even folded. Request on 0043-6641838175 or info@frigocom.at

Cauldron standing on 4 wheels Manufacturer: Appointed Serial No.: -. Year of construction: 1971 Volume: 150 LTR. Material: 1.4541 In the pressroom: Operating pressure: 5 bar Capacity: 20 LTR. Operating temperature: 158 ° C In the loading space: Content: 150 LTR. Operating temperature: 100 ° C Dimensions: Bowl ø: approx. 540 mm Interior height front: approx. 640 mm Interior height rear: 580 mm L x W x H: 700 x 700 x 1,100 mm (with wheels) Containers with heating jacket with sloping to the spout, tank outer shape rectangular, marbled at top: 1 hinged lid approx. 600 mm diameter with hinge and handle on the front: 1 temperature display 1 valve 1 " 1 spout DN 32 with shut-off valve at the back: Heating valve