heating used for sale

- E/H Heating Unit - HP Part Number CA397-00342 - for HP Indigo Series 3 Machines

General SKU204U028 LocationBarneveld MakeConthermo Type10180129 No.064930WE Year of construction2007 Main Features MaterialStainless steel Volume3000 Ltr. Max.temp.150 °C Specified Features - Drying oven Drying ovencheck Max. temperature150°C Number of compartments:1 Internal width1500 mm Internal depth1500 mm Internal height1500 mm Electric heatingcheck Electric capacity3x 4 kW, 400 volt Number of doors:2 With fancheck Motor0,55 kW, 240/400 volt With timercheck MaterialStainless steel Information With switchcheck Weight1500 kg CEcheck Floorspace1,90x1,75 m Total height2,50 m Extra SpecificationsWith double roll conveyor. roll size 580 mm : load cap. 450 kg New arrivalsDrying ovensConthermoNew arrivalsDryers > Drying ovensBrand > Conthermo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

Press force max.:: -- kN heating plates:: 600x600,500x500 mm electrically heated:: -- °C piston stroke:: -- mm no. of stages:: 1-3 Condition: Used, Specification: 5x vulcanising press, second-hand consisting of: 2x make Simpelkamp, 2x make Reinartz, two-daylight presses 1x make Reinartz 1x crane system 1x pedestals Simpelkamp presses: - Clamping force: 250 t - number of floors: 1 - Closing: from bottom to top - Heating plates: 2 electric plates - Dimensions of heating platens: 600 x 600 mm - Distance between heating platens: 530 mm - Hydraulics: 200 bar - AC machine power oil pump: 7,5 kW - Dimensions approx.: 1,300 x 1,000 mm - Unit height approx.: 2,800 - 3,000 mm Two similar plants are available Reinartz presses: - Clamping force: 140 t - Number of floors: 3 - Clo ...

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

Type; AUMA 15SN X 1600 Manufacturer: Berstorff, Germany Year of manufacture: 1998 Technical Specification: Working width: 1600 mm Steel belt width: 1750 mm Steel belt thickness: 1,8 mm Steel belt length: 15600 mm Rolls width: 1950 mm Center distance between frames: 2330 mm Heating roll diameter: 1500 mm Stretch rolls (I, II, III) diameter - 1000 mm Vulcanizing time: 1?30 min Working speed: 7?.210 m/h Max steam pressure in heating roll: 13 bar Max steam pressure in lower stretch roll: 8 bar Surface temperature of: Heating roll: ca. 195oC Lower stretch roll: ca. 175oC Pressure in heating zone between steel belt and rubber: 60 N/cm2 Main motor speed: 1 450 min-1 Drive position: Left from inlet Paint: RAL 6011 Air supply: 6 bar Cooling water supply: + 25oC Max hydraulic pressure Belt pressure tension: 250 bar Belt pressure regulation: ...

SOLO 202 30/30/60 quenching machine built in 2001 in Switzerland, is a multifunctional machine used in the process of workpiece quenching. The quenching process improves the mechanical properties of the workpiece by increasing its strength and wear resistance. The machine’s extensive machining capabilities and high performance allow the following types of metal heat treatment to be performed: – austenitizing (in atmosphere, protective gas or nitrogen) – carburizing – carbonitriding – water quenching – tempering (without protective gas) – alkaline spray washing – annealing The SOLO quenching machine of multi-module construction is equipped with two quenching furnaces (a bell furnace and a tempering furnace), two tanks (an oil bath and a water tank) and a spray washing machine with a two-section oil separator for load washing. The furnaces, made of top-quality she ...

Moisture Analyzer from Mettler Model Type HB 43 - S. The instrument powers on but and it is working but sometimes after a while it turns down. We can not fix it so we are selling it for parts as a non-working condition. The Halogen Moisture Analyzer is used for determining the moisture content of almost any substance. The instrument works on the thermogravimetric principle. At the start of the measurement the Moisture Analyzer determines the weight of the sample, the sample is then quickly heated by the integral halogen heating module and the moisture vaporizes. During the drying process the instrument continually measures the weight of the sample and displays the reduction in moisture. Once drying has been completed, the moisture or solids content of the sample is displayed as the final result. Of decisive importance in practice is the rate of heating and even heating of the sur ...

Used vacuum homogenising mixer type HYJRZ-50. Technical data: - Machine made of stainless steel, - Tank capacity: 65 L, - Working volume: 50 L (minimum 30 L), - Mixer: 1.5 kW 60 rpm, with inverter for speed control, - Homogeniser: constant speed 2.2 kW 2900 rpm, with inverter to regulate speed. - Power supply: 3 phases 380v/50hz, - Vacuum pump helps to pressurise the tank, - Lower 2 electric heaters are made of high quality stainless steel, tap water valve for heating the jacket, temperature control on the control panel, - Maximum heating temperature by water heating 100 °C , - Maximum heating temperature by oil heating 150 °C, - Minimum heating temperature is room temperature; - Heating power 6kw, - Cooling method: by cold water or chilled water through the central jacket. - The temperature sensor for temperature measurement is located in the control box. - Wei ...

working table size: 3000 mm x 1300 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 25 m³/h; pump capacity: 0,75 kW; noise level: 70 Db; heating system temperature: max. 60 °C; heating system: 4,5 kW; machine length: 3100 mm; machine width: 1450 mm ; machine height: 1650 mm; weight: 450 kg; The membrane presses of VP series are optimal solution for woodworking and a furniture production from all types of wood. The vacuum presses are equipped with heating system which allows reduce the time of drying glue and increase productivity of production. The heating temperature monitored and maintained automatically. The membrane presses of VP series can be used for small capacities but also for professional using. Construction The sturdy welded construction with a removable feet’s. Work table from 12mm HPL board.   Heating Heating system ...

Double-walled heating tank (capacity approx. 1 m³) incl. heating station and switchgear for media heating. Heat transfer medium thermal oil (approx. 200 l), container insulated with foam glass Heating station consisting of 8 electric heating elements (each 6 kW - forcibly flowed, monitoring) incl. pump (Fabr. Speck + spare pump), incl. control cabinet Container was used for heating wax (heating medium approx. 75-90°C)

Integrated equipment for production of chocolate, chocolate cream and chocolate coating for ice cream. The fat is melted in the heated fat melting tank, then fat is dosed into the temperature controlled chocolate ball mill where is added sugar, cocoa powder and other ingredients, being milled for about 4-6 hours at a controlled temperature. In the first part of the process the tank is heated then cooled by tap water. After milling the chocolate is transferred to the chocolate storage tank. Fat melting tank 540l heating by water jacket and electrical resistor heated grid with 250l beneath the grid volumetric dosing pump controlled from switch board 0.55 kw, app. 200 rpm stirrer 13.1 kW - installed power 2 x 6 kW = 12 kW - heating resistors 0.55 kW water circulation pump stainles steel filter heated fat dosing pump Ball refining tank 500l working ca ...

PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...

Process tank 450 l · vertical tank · pressure tank up to 2 bar · main tank made of stainless steel AISI 316Ti · tank insulated with mineral wool with a thickness of 50 mm in the cylindrical part and on the bottom end outer jacket made of stainless steel AISI 316Ti, thickness 2mm · bottom and top bottom pressed DIN 28011 · heating jacket for glycol · circulation pump · heating medium temperature sensor · expansion vessel of the heating system electric heaters - 5 pcs. 4.5kW/400V · control box: controlled by the heating system and the operation of the stirrer · heating medium supply connector DN33.7 · connector for receiving the heating medium DN33.7 Equipment: · manhole DN300 (2 bar) with a safety sensor drain connection (heated) filling connector (heated) · filling level sensor connector · PT-100 temperature level connector · safety valve · Redox + e ...

GWELL GWC 80-156 WPC production line manufactured in 2015 is characterised by high production efficiency. WPC boards are made by combining natural components with thermoplastic polymers. This results in a material with the high aesthetics of wood and the exceptional durability of plastics, distinguished by full resistance to fungus, insects and various atmospheric factors. The production line consists of: – GWC 80/156 twin-screw extruder – GWC 65/132 twin-screw extruder – CUT 240 saw – CAL 14000/6 calibrating table – ROL 240 2-caterpillar haul-off – unloading table The WPC profile extrusion line is offered with optional heads for forming different types of profiles from these products. To date, the machine has only been in operation for a dozen days and has not been used at full production scale. For an additional charge, equipment cooperating with the line can ...

Belimed WD290 washing and disinfection machine List price: € 52,616.00 net per system WD290 Washing and disinfection machine for machine instrument preparation Automatic washroom door made of double-walled safety laminated glass only in two-door design Applications: Surgical instruments Minimally invasive instruments Conatiner Surgical shoes Laboratory equipment Specifications Features / Components WD 290 Heat emission freestanding 1000 (+/- 200) W Weight with side panel 384 Kg Noise value with side paneling 62 dB(A) Door opens automatically from top to bottom with safety shutdown switch list Material: Frame cladding chrome nickel steel 1.4301, AISI = 304 Material: Washing chamber and door chrome nickel steel 1.4404, AISI 316L Wall thickness wash chamber 1.5 mm Washing pump nominal pump pump capacity 900 l / min Washing pump pump pump operating power op ...

Electric spindle press REITZ EHSP100F as laboratory heating press / demonstration machine Laboratory heating press with pressing pressure 40 KN (4 tons), ratio 1 : 16, spindle diameter 45 mm, pitch 8 mm, spindle stroke 0.5 mm per revolution. Gear motor 0.75 KW, 1,500 rpm, 4-pole, with spur gear i = 1:5, Speed 150 mm / min. Max dynamic load 25 kN. With reversible control, emergency stop and motor protection plug. Total weight approx. 100 kg, table surface 600 600 mm, pressing surface approx. 150 250 mm, clear height approx. 60 mm. Base made of high-quality aluminium profiles 4545 mm, the table top is made of glued plywood top. The laboratory heating press has 40 kN pressing pressure (dynamic load). The spindle is self-locking and thus maintains the pressing force for a longer period of time. For an extra charge with heating plate, insulating plate and temperatur ...

ELMETHERM 27 x 4.4 m furnace for plastic pipes was manufactured in 1997 in France. The furnace is used in the process of heating and shaping single-layer plastic pipes with a maximum wall thickness of 3 mm and a diameter from 8 mm to 35 mm. The workpieces are preheated in the machine’s heating pipes and then vulcanised and shaped at 168°C. At the very end, the plastic pipes are moved to a special cooling tunnel, where they are cooled with air at 42.8°C. Automated heat treatment of large quantities of workpieces is possible due to the use of conveyors in the machine that transport the workpieces between the different stages of the process. All functions, such as switching on heating or cooling, are controlled via the SCHNEIDER MAGELIS HMI touch panel. The gas furnace for moulding PA plastic pipes weighs approximately 35000 kg. Technical data of the ELMETHERM 27 x 4.4 m industri ...

Key data: 1180 °C

AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation. The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a  ...

contino 400/2 KLT container washer The machine is manufactured in a special service provider design and has a maximum tunnel width of 410 mm and height of 410 mm, which means that almost all common industrial containers can be cleaned. Depending on the degree of soiling, the capacity is

Beer Brewery Two Vessel VELO 15hl/brew, two brews/day, up to 4000hl/annum Complete two vessel beer brew line made by Italian VELO (currently TMCI Padovan) suitable for various beer types from ALEs to LAGER’s, non-alcoholic beers to strong, over 10% Imperial Stouts. Normal brew size has been 1500 liters and during high season, they have brewed 2 brews during 10-hour day. Maximum batch of malt is 600 kg. Without adding sugar beer wort has been from 18.5 to 21 Plato and with sugar added, up to 35 Plato. One complete brew batch with CIP will take about 5-6 hours. In operation, this brewery has overlapped brew batches so that once the first batch of the day has been lautered and spend grain has been unloaded, they started next brew. Maximum weekly brewing capacity with 10 hour working days has been 6 brews (3x3000 liters CCT) due to fermenting tank capacity which leads to theoretical 40 ...

working table size: 3000 mm x 1500 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 40 m³/h; pump capacity: 1,5 kW; noise level: 70 Db; heating system temperatur: max. 200 °C; heating system: 16 kW; machine length: 3100 mm; machine width: 1650 mm ; machine height: 1100 mm; weight: 850 kg; Membrane vacuum presses of TF series are specially designed for preheating and shaping of solid surface materials (Corian, Hi Macs, Staron, Hanex, Kerrock and others), as well for acrylic material and for thermoplastic forming. TF series vacuum presses are combined solution of including functions of two separate machines: vacuum press and preheating oven, and this greatly increases functionality of the press.  Thermoforming Preheating and 2D and 3D vacuum forming of thermoplastic and acrylic materials. Production of worktops, sinks, shells, bar counte ...

Press force max.:: 1.000 kN heating plates:: 480 x 520 mm electrically heated:: °C piston stroke:: ca. 500 mm no. of stages:: 1 Condition: Used, overhauled Specification: 4-column vulcanising press 480 x 520 mm, used - closing force: 100 t - closing: from top to bottom - heating plates: 2 electric plates - New heating platens - Dimensions of heating plates: 480 x 520 mm - Distance between heating platens approx.: 500 mm - AC motor: 5,5 kW - New electric valves - New control cabinet with Siemens 7 touch panel - SPS system Siemens S7-1200 - Frequency converter make Schneider - New cabling - Light curtains in the front operating area Overhauled according to CE standard safety regulations Operating and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

Control unit, heating controller, osmosis control control box, heating controller, heating control device -Eurotherm: nanodac 4-channel curve recorder -Heating control system for: 2 heating fields -Table control unit with: 380 V connector -Number: 3x available -Price: per piece -Dimensions: 560/540/H300 mm -Weight: 26 kg/piece

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...

I am selling a heating air drying tunnel BURKLE Model: Easy Dry JET 1300 Filter: TRDUE / 700 m3/h Fan 7,5kW / 6800m3/h / 35 m/s Working width 1400mm Overall length 6.00m Electrical connection 36.5kW Heating air system 12 bladder units Heating medium water up to 80°C Max. heating capacity 45 kW Max. temperature of heating surfaces 120°C Siemens Simatic Touch Control Panel Year of construction 2014. System NEW, already not used ! Available soon.

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

Press force max.:: 5.000 kN heating plates:: 1100 x 1200 mm electrically heated:: °C piston stroke:: ca. 620 mm Condition: used, overhauled 2021 Specification: Vulcanising press 1100x1200 mm, Panel structure, used - closing force approx.: 500 t - Closure: from bottom to top - 2x heating plates: with new resistors - heating plates: electric plates - Dimensions heating plates approx.: 1100 x 1200 mm - clear width between the heating plates approx.: 750 mm - piston stroke approx.: 620 mm - Additional panel for 0-closure between the Plates - New electric valves - AC machine power AC motor: 15 kW - New control cabinet with Siemens 7 touch panel - PLC system Siemens S7-1200 - Frequency converter: make Schneider - New cabling 2021 - Light curtains at the front - CE marking form 2021 - Operating and maintenance manual in German language Re ...

Laser heater Qlima SRE 8040 TC silver Only 8 pcs available Stock clearance This powerful SRE 8040 TC laser heater brings a lot of heat into your home. The integrated digital display makes it easy to select the desired temperature or function. The built-in thermostat adjusts the power according to the set temperature. In addition, the SRE 8040 TC is equipped with most standard functionalities such as a day timer and fuzzy logic. Thanks to the "Fuzzy Logic" of the Qlima SRE 8040 TC, the room has the preset temperature at the desired time. This laser emitter is also equipped with an automatic burn time extension. When the fuel runs low, the device automatically switches to a lower combustion level, so that the refilling of the fuel is postponed for some time. The lasers from Qlima, full of technical ingenuity! The heater comes with a handy fuel siphon pump. Fuel When choos ...

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Glass Heating Equipment Furnace GT1411 Equipment application. This special equipment is used for heating homogenously the flat glass and cooling it thereafter, is involved in the glass deep processing machinery. The suitable working glass is clear float glass. Power supply requirement and total weight of equipment. This kind of equipment requires a 3-phase-5-line AC power supply of 380V and total installed power of it is about 250kW. Total weight is about 10 tons. Constitution of Glass Heating Equipment. Computer, control cabinet, power regulation cabinet, loading table, heating section, coating section, annealing section, unloading table. The Furnace was in good operational condition when it was dismantled in 2016. The unit is located in a warehouse in Finland

Injection moulding machine 3-colours (horizontal /vertical/ and 3rd in L-position with protective enclosure) with turntable available now from our warehouse Hannover Make: Arburg Type: 420C 1000-150/150/60 Built in 2003 Control: Selogica Hours: 20092 h +Closing Unit+ Clamping force: 1000 kN / 1000 to. Tie bar ratio: 420 x 420 mm Plate size: 570 x 570 mm Injection Unit 1 (150 unit) Screw size: 15 mm (high-screw) Pvlzwy Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 2 (150 unit Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2750 bar Injection Unit 3 (60 unit) Screw size: 15 mm (high-screw) Spray volume: 17 cc Spray weight: 15 gr. Spray pressure: 2080 bar extras 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection moulding machine Tool clampi ...

FRANCE ETUVES XXL01 industrial furnace was manufactured in 2013. The furnace used in curing, polymerisation, coating, heating and drying of workpieces has a structure made of high quality steel with a 1000 litre capacity utility chamber. A large opening door allows for quick and easy loading of workpieces without weight limit into the chamber. The air from the top of the furnace is drawn in, heated to 200°C and blown out from the rear of the chamber onto the workpieces via an efficient ventilation system. All of the furnace’s heating elements are ideally positioned in the airflow, guaranteeing fast and efficient heating. In the case of a malfunction, the fan and the heating process are automatically stopped. The machine is equipped with a PID control C3000 with functions such as real-time temperature display, start delay and cycle repeat. The total weight of the furnace is 500 kg.  ...

Estimated stock: approx. 4 pcs. Advantages: - Optimal airflow through AirSurround technology. The airflow rotates upwards instead of downwards. Cooled air sinks to the bottom. Warm air is sucked in and cooled by the device. - App control. This makes it possible to control the room temperature from anywhere - Magnetic, minimalist and responsive remote control - Circular cover for optimal airflow - Best mobility thanks to discreet wheels The scope of delivery includes: 01x Air conditioner, new Manafacture: AEG Type: PX71-265WT Product dimensions: 955 x 388 x 388 mm Package dimensions: 531 x 459 x 1,190 mm Cooling capacity: 2.6 kW EER: 3.1 Energy efficiency cooling: A+ Heating capacity: 2.1 kW COP: 2.8 Energy efficiency heating: A+ Noise level max.: 64 dB(A) For room size: 30 - 40 m² / 70 - 90 m³ Functions: Heating / Cooling / Fan / Dehumidification / Auto Air Fl ...

IROP Autoclave 6.25m long x 1.5m diam. Heating – Electric and steam For heating, works with three options (1 – Only electric with resistances; 2 – Only water steam; 3 – Electric + water steam). 165ºC calculation temperature Working pressure – 6 bar Test pressure – 7.5 bar Manufacturer – IROP Insurance certificate– (last technical inspection 12/08/2020; validity 12/08/2026) Year manufacture – 1976 There is a fan inside at the back. The fan sucks air from the centre and blows heated air through the wall. Around the fan there are 6 electric resistances for heating, also a circular tubular for water steam. The air passes though heating elements and rises the temperature. Total electric power – 50 kW. Last in use – March 2023

ITAL Autoclave 6.25m long x 1.5m diam. Heating – Electric and steam For heating, works with three options (1 – Only electric with resistances; 2 – Only water steam; 3 – Electric + water steam). 165ºC calculation temperature Working pressure – 6.37 bar Test pressure – 8 bar Manufacturer – ITAL-RUBBER Insurance certificate –(last technical inspection 12/08/2020; validity 12/08/2026) Year manufacture – 1990 There is a fan inside at the back. The fan sucks air from the centre and blows heated air through the wall. Around the fan there are 6 electric resistances for heating, also a circular tubular for water steam. The air passes though heating elements and rises the temperature. Total electric power – 50 kW. Last in use – March 2023

max. temperature: 1350 Grad size of opening: 300 mm depth of chamber: 600 mm total power requirement: 25 kW weight of the machine ca.: 1,5 t : : : : : Hardening Furnace Temp. 1350 °C H E R E A U S Electrically heated Hardening Furnace with Double Chambers for preheating and hardening. Model DKM 5 Year 1965 ______________________________________________________________ Temperature range max. chamber 1 1.000 °Celsius Temperature range max. chamber 2 1.350 °Celsius Door opening 300 x 200 mm Chamber size width x height x depth 300 x 200 x 500 mm For chamber 2 300 x 200 x 600 mm Working height above floor 1.050 bzw. 1.625 mm Heating up time 20°-1.350° = hardening chamber 2,75 h Heating up time 20°-1.000° = preheating chamber 2,00 h Exter ...

Hydraulic press 80 t of stable design and high press force was manufactured in 2021. The hydraulic vulcanising press enables efficient processing of rubber and thermosetting plastics in manual or automatic mode. Excellent parameters and two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm make the hydraulic vulcanisation press for rubber ensure high efficiency of 48 tons per month during three-shift operation. Technical specifications of the rubber press - press force: 80 t - heating plate dimensions (L x W): 1200 x 1200 mm - electric heating - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operation modes: manual or automatic - full technical documentation - CE certificate

Hydraulic vulcanising press 80 t built in 2021 is distinguished by its stable construction and high press force. The hydraulic vulcanisation press for rubber is designed for the efficient processing of rubber and other thermosetting plastics using two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm. The hydraulic press achieves a capacity of 48 tonnes per month when operating in a three-shift system. Technical specifications of the rubber press - maximum press force: 80 t - electric heating - heating plate dimensions (L x W): 1200 x 1200 mm - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operating mode: manual or automatic - full technical documentation - CE certificate

Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) Pvlzwy immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h +Schließeinheit+ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 570 x 570 mm Injection unit 1 (150 unit) Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 2 (150cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 3 (60cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 1 ALLROUNDER 420  ...

machine measurements: Länge ca. 21.000 mm machine weight: -- kg power capacity: 200 kW Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Tempering range: 240°C - 340°C - Heating: gas heated - Control system: Siemens Heating duct extension by 2x 3m, 2015 - The duct was extended by 2x 3m segments in 2016 - The burners of the 21,000 mm system were renewed in 2015 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This is an electric rectangular cooking kettle from the premium manufacturer Electrolux/Therma, type PBEN40EKEM (400 litres) from 2017. The appliance is suitable for cooking, steaming, poaching, stewing or simmering/simmering food. The boiler is equipped with a closed, non-refillable "electric steam heating system" (without replenishment from the water network). Heating is provided by an electric steam heater. Here the electrical energy is converted into steam, working pressure 1.5bar. The radiators are equipped with boil-dry protection. The heating capacity is divided into 4 heating levels with automatic transition from the boiling to the continuing cooking process by an energy-saving microprocessor control. Equipped with the therma touch control for permanent, easy-to-read display of target and actual values such as temperature, working time and power levels. This is a pedestal install ...

This is an electric round cooking kettle from the premium manufacturer Electrolux/Therma, type PBON15EKEM (150 litres) from 2017. The appliance is suitable for cooking, steaming, poaching, stewing or simmering/simmering food. The boiler is equipped with a closed, non-refillable "electric steam heating system" (without replenishment from the water network). Heating is provided by an electric steam heater. Here the electrical energy is converted into steam, working pressure 1.5bar. The radiators are equipped with boil-dry protection. The heating capacity is divided into 4 heating levels with automatic transition from the boiling to the continuing cooking process by an energy-saving microprocessor control. Equipped with the therma touch control for permanent, easy-to-read display of target and actual values such as temperature, working time and power levels. This is a pedestal installation ...

Heating power: 185 kW Heating water inlet temperature: 55 C Heating water outlet temperature: 60 C Heating water volume: 32 m3/h Refrigerant: R 134a Starting current: 147 A Capacity: 2x 25 kg Operating voltage: 400 V Control voltage: 230 volts Operating pressure: 28 bar Displacement: 101 m3/h Power consumption: 43 kW Subject to prior sale - errors possible Ref. No.: E-1165

Equipment for plastic recycling Co-Extrusion system composed of two double spindle extruders BAUSANO MULTIDRIVE system 4 x 2, Series 92-BGP-5031. Year 1.985 - Its general condition is excellent, it has always had a permanent and impeccable maintenance. Suitable for the treatment of virgin materials and those from thermoplastics recovered from HDPE, LDPE, PS, PP, UPVC, PVC, and also for the manufacture of polymeric alloys such as the composition of PC + PAY + PB + Fiberglass, etc. Also the Composition of: PP, PAG, Fiberglass, Alloys with sawdust, nut shells, natural fibers and the like. You can also work only with the main extruder, in which case the production would drop only 30/40% The MULTIDRIVE transmission system, with corrotating spindles and four efficient motors, is a reference technology in the world of extrusion, guaranteeing the highest quality and precision, even in ...

Product number: 2739 Type: Afogrill Serial number: G 004A Year of construction: 2007 Heating: natural gas, 100 mBar Heating power: 216 kW Burners: 3 x 1000 mm Power: 3 x 400V, 50Hz, 3kW Dimensions: 2600 x 1600 x 1800 mm Weight: 600 kg Type: Afogrill Serial number: G 004B Year of construction: 2007 Heating: natural gas, 100 mBar Heating power: 216 kW Burners: 3 x 1000 mm Power: 3 x 400V, 50Hz, 3kW Dimensions: 2600 x 1600 x 1800 mm Weight: 600 kg Afoheat conveyor Belt width: 330 mm Power: 3 x 400V, 50Hz, 0.25kW Dimensions: 7850 x 1000 x 950 mm

Overview  The bottle washer was manufactured in 1998 by the German company Krones. It is located at a German mineral fountain and is part of a line that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The bottle washer is still assembled.  Technical data  Capacity: 44,000 bph  Control range: 17,000 - 50,000 bph  Bottles per row: 35  The Machine in Detail / Equipment Features Residual emptying Pre-soak/ pre-caustic High pressure pre-spraying with automatic screen discharge Machine multi-part with 3 shocks Pre-soak, water zone incl. head section Discharge in V2A Post-leach immersion bath KES Post-leaching area in V2A  Bottle cell in steel with plastic mouth Feeding table in VA Insertion finger feed with safety shutdown Discharge with pick-up finger and safety cut-out Muzzle basket control at the ejector Shard ejector behind the d ...

Plate press, gluing press, veneer press, splicing press, heating press, molding press -Handover: in the current condition as seen -Heating plates: the middle heating plate is defective -Manufacturer: Paul Ott, veneer press heatable type JU 80 -Drive: hydraulic -Heating capacity: 24 kW -Working area: 2550 x 1350 mm - Opening height: 400 mm -Dimensions: 3325 /1540/H1850 mm