heating used for sale

Heating pump, chemical pump KSB RIO 25-7 D ID number: 29 130 138 PN 6/10 Connections: Rp 1 installation length: 180 mm Tmax.: 130°C motor: 0,,09 / 0,13 / 0,185 kW 230 / 400 V 3AC 50 Hz IP43 New ! Dimensions: 180 x 160 x 215 mm

Heating pump, chemical pump KSB RIO-C 30-25 ID number: 40 982 513 PN 10 connections: Rp 1 1/4 installation length: 180 mm engine: 0,,018 / 0.031 / 0.0.048 kW 230 V 1AC 50 Hz IP43 New ! Dimensions: 180 x 100 x 130 mm

Heating pump, chemical pump KSB RIOVAR 22-7 D ID number: 502 001 196 PN 6/10 Connections: Rp 1 installation length: 180 mm Engine: 0,,105 / 0.14 / 0.18 / 0.23 kW 380 V 3AC 50 Hz New ! Dimensions: 180 x 160 x 210 mm

Heating pump, circulating pump, energy-saving pump WILO Stratos30/1-6(DE) 2095495/12w34 PN 10 Connections: G 2 installation length: 180 mm Tmax.: 110°C engine: 0,0,009 - 0,085 kW 230 V 1AC 50 / 60 Hz IPX4D New ! 210 x 180 x 240 mm

Heating pump, circulating pump, energy-saving pump WILO Stratos65/1-12(DE) 2095506/12w31 PN 6 / 10 Flange diameter: Ø 185 mm installation length: 340 mm Tmax.: 110°C motor: 0,0,0,00 mmbr /br / 038 - 0.8 kW 230 V 1AC 50 / 60 Hz IPX4D New ! Dimension: 340 x 330 x 430 mm

Glue pump with heating More then 300 machines new and second hand on our seema .de

Heating pump, chemical pump, twin version KSB 2x RIO Z 65-100 D ID number: 29 130 519 PN 6 / 10 DN 65 installation length: 340 mm Flange diameter: Ø 185 mm motor: 0,0,6 / 0.76 / 0.96 kW 230 / 400 V 3AC 50 Hz New Dimensions: 435 x 340 x 340 mm

Glue pump with heating More then 300 machines new and second hand on our seema .de

Heating pump, chemical pump KSB RIO 65-70 ID number: 29 130 565 PN 6 / 10 DN 65 installation length: 280 mm Flange diameter: Ø 185 mm motor: 0,,36 / 0,445 / 0,550 kW 230 / 400 V 3AC 50 Hz New, with documents ! Dimensions: 280 x 250 x 310 mm

Heating pump, chemical pump KSB RIO 65-100 D ID number: 29 130 118 PN 6 DN 65 installation length: 340 mm Flange diameter: Ø 160 mm motor: 0,585 / 0.760 / 0.970 kW 230 / 400 V 3AC 50 Hz New ! Dimensions: 280 x 250 x 310 mm

Heating expansion tank, diaphragm accumulator, pressure accumulator STÜCKLIN, PNEUMATEX 742 5040 capacity: 1000 litres zul. Operating pressure: 6 bar zul. Operating temperature: 5 to 70°C diameter: 900 mm height: approx. 2200 mm

IR heating system, infrared heater KRIEGER Year: 1996 Nominal heat output: 16 kW 400 V air supply is required ! stainless steel housing Dimensions: 820 x 800 x 520 mm

Heating system Fabr. Endress Type USF-W 350 Power: 350 Kw Bj.2010 with loading with ash discharge with control with bunker discharge Fabr. Nolting Type BAS 250 Year: 1985 with briquetting press Fabr Reimann Type 450/30 built in 1985

Pellet heating, pellet stove, biomass stove used. Manufacturer: ELMEC Group Srl Type: B-MAX 300 EBBR020300-P01 Year of construction: 2018 Burner power max. 300 kW Nominal power 250.2 kW Max water temp. 90°C Boiler dimensions: approx. 1700 x 1100 x 1650 mm Additional burner approx. 1000 x 500 x 900 mm Pellet hopper approx. 800 x 800 x 1200 mm + auger Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Babcock Wanson Diathermic oil heating unit Model: STPC 600B Serial Number: 12.19.N3604 Test Pressure 15bar Working Pressure 10 bar Working Temp: 350degrees Please message for more photos

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container - Manufacturer: HOMAG - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Dimensions: 440/185/H240 mm -Weight: 30 kg

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Nummer: 3 pieces available -different designs -Price: per piece -Dimensions: 300/170/H190 mm -Weight: 16.8 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 460/160/H340 mm -Weight: 19.5 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0660 -electrically heated -Dimensions: 410/140/H220 mm -Weight: 8.2 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: HOMAG -Type: 0-380-03-0497 -Type: 2-006-51-2870 -electrically heated -Dimensions: 400/70/H225 mm -Weight: 10.6 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 4-060-15-0600 -electrically heated -Dimensions: 470/175/H385 mm -Weight: 20.3 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container -With the premelting device, you always have enough hot melt adhesive available -Manufacturer: ENA -Type: 15-259 -electrically heated -Dimensions: 580/220/H570 mm -Weight: 18.7 kg

Underfloor heating clip fixers, -Clipmaster: 17 -in the suitcase -Dimensions: 930/250/H80 mm -Weight: 5.8 kg

Heating cartridge -Diameter: 10 mm -Length: 226 mm -Volt: 230 V. -Watt: 230 W -Number: 2 pieces -Price: complete -Weight: 0.15kg

Heating pump, circulation pump GRUNDFOS ALPHA2 20-40 N 150 97660453 max. 1, 0 MPa ( 10 bar ) connections: G 1 1/4 ( inch ) installation length: 150 mm motor: 5 - 22 Watt 230 V 1AC 50 Hz New, ! Dimensions (pump): 150 x 98 x 155 mm Dimensions (packaging): 200 x 170 x 115 mm

1 piece used HOT AIR HEATING UNIT (in a container installed) Manufacturer: KROLL Type: HLE 200 Completely overhauled/reconditioned in 2021 Since overhaul 0.0 h immediate available Location: Wittenberg Germany Price on request Offer and prices are purely net ex location, in the actual condition Subject to prior sale, errors and/or misrepresentations excepted, without guarantee and/or warranty, as seen, lying and/or standing

Tempering furnace ARTUR NOLZEN type TL30/30/50 Hot convection oven, convection oven, heating oven Fabr. No. 14785 Year of construction 1996 Temperature range max. 750C Internal dimensions 300 x 300 x 480 mm Inner width at central bar 260 mm Connected load 6 kW Mains connection 400 volts, 50 Hz temperature control NOLZEN type TRO t - 96 Ia.re4 - Time control THEBEN, type TR 635 top Space requirements L x W x H 1300 x 1100 x 1400 mm Weight 310 kg good condition; used

Heating pump, chemical pump KSB ETALINE GN 032-160/302 G11 Q = 24 m3/h H = 20 m 50/60 Hz 400/690 V Motor: 3 KW IP 55 New ! dimensions 65x31x40 cm

The heating system includes: - Boiler Buderus Logano GE515- gas boiler 350-400 KW - Gas burner Weishaupot WG40N/1-A ZM-LN, probably built in 2010. - Diaphragm pressure expansion vessel 800 liters, manufacturer Reflex. - Storage water heater 390 litres, Buderus. - Complete control

Tank with heating approx. 65 ltr. More then 300 machines new and second hand on our seema .de

Description: Adapted for environments of 100-150 square meters or 500 cubic meters. Voltage: 220 volts single-phase - Power: 0.2 Hp. Fireplace power: 29,900 Kcal/h. Conventional power yield: 25,000 Kcal/h. Air flow rate: 2,200 cubic meters/hour. 2 orientable outlets diameter: 180 mm. Fireplace dimensions: 500x400x590 mm (length x width x height). Chimney diameter: 160 mm. serial number: 419, heating power: 80 kW, fuel: Legna, Approx. Onsite Dimension. (l x w x h): 570 x 920 x 1,560 mm, weight approx.: 200 kg

Was in production for heating wine. More then 300 machines new and second hand on our seema .de

Glue pump with heating including temperature control Drive type: pneumatic Control type: electric 5/2 solenoid valve Delivery rate per double stroke: approx. 33 cm³ (Water) Delivery rate at 2 Hz: approx. 4 l / min (240 l / h) Operating pressure: 3 - 6 bar Compressed air connection: plug nipple NW 7.2 Connection medium: hose nozzle 19 mm Suction tube length including suction base: 420 mm Waterproof according to IP66 Pump head: ABS Pump base: POM Riser pipe: stainless steel Suction base: stainless steel Valve balls: stainless steel Seals liquid part: FKM Electric voltage: 220-240V / 50/60 Hz Electrical connection: incl. Schuko plug Cable length: approx. 2 m More then 300 machines new and second hand on our seema .de

Glue pump with heating More then 300 machines new and second hand on our seema .de

Wine Heater and Cooler Compact system for  • Direct cooling or heating of must at the beginning of fermentation • Tartaric stabilization of wines • Warming up wine from storage to bottling temperature • Biological reduction of acids • Regulation of fermentation temperature • Cool storage of wine until bottling • Suitable for sparkling wine and carbonated beverages (closed loop with no carbonation loss) • Cooling of liquids with particles such as unfiltered juice • Air cooling of the cellar in combination with additional equipment (thermo-fans and accessories) The stainless steel units are ready for operation, mobile and equipped with automatic temperature regulation. Technical data: Cooling capacity 41,000 W Max. output: 45,500 W Power consumption: 12.7 kW, 22.3 A Pump capacity: 10,000/12,000 l/h Connections: NW 40 DIN 11851 External dimensions: L 1050 x W 1 ...

Complete boiler system Weiss Year of construction - 1989 Power - 2500 kW For very wet chips incl. bark Water content - about 12500 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulical ash removal Cyclon for dust separation Complete controling system Well maintained, excellent condition

Material: stainless steel Volumes: 3,000 litres new machine We build the mixer you require. Do you need a whole plant from used or new components? Write us below!

Fuel oil tank tank system diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 50,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9,000 kg Of course, you can also use  ...

1 pieces. tanks 30,000 litres, fuel oil tank fuel tank fuel station gas station home service station storage tank storage tanks Court gas station steel tank according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid, is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted RAL 7042 - traffic-grey. (Other RAL colours are possible upon request!) L = 10,00 m / D = 2.00 m / weight CA. 5,7 tons. / free charged ex works ...

Fuel tank - fuel tank - steel tank - tanks - used oil tank - tank system gas station - home station - storage tank - storage containers - farm service station - steel tanks 50.000 litres content - according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The tank is painted exterior green - no repainting. L = approx. 10.70 m / D = 2.50 m / weight CA. 9,0 tons. / free charged ex works.

with gas burners Weishaupt new glass wool new stainless steel sheets New storage engine Power Max 465 kW the boiler is uberholte with gas burner Weishaupt with new glass wool new grid grate Engine re-stored Power Max 465 kW the boiler is overhauled

Furnace 1200 working temperature 100 - 1200 Celsius size 1x1x2m auto door auto bogie Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen Poreba Gurutzpe Tacchi Gem ...

Shear grate firing power 1,000 kW computer control max. pre-temoerature 110 C dismantled by specialist company and is in stock

nett cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyor washing system (conveyor) steam heated max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed

Type HLP Voltage 220 V Power 400 W Length 120 mm Diameter 8 mm Made in Germany Weight 70 g

Length 1155mm Thread diameter 47 mm Power 1500 W Voltage 230 V Transport dimensions 1220x70x70 mm Weight 0,8 kg

Useful power KW: 2,400 Usual yield Kcal/h: 2,165,480 Combustion system: Methane gas Temperature: 90°C Maximum working pressure bar: 5 Burner Baltur "BGN 300"

Used storage heater Manufacturer Seipp Type UAGG 390- heats workpieces and ball bearings up to XXX kg With various yokes in different sizes Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturer, mechanical engineering, transport sector Voltage / Frequency / Power: 380 V / 50Hz / 35A Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearing max. xxx kg (other workpieces xx kg) Inner diameter 15/120 mm Outer diametermax. xxx mm Width max. xxx mm Automatic temperature: Magnetic sensor, control range 60 °C to max. 160 °C Aperture priority: Bays: Edge length 80mm, 70mm, 60mm, 40mm, 30mm, 20mm, 15mm - Induction heater - induction heater Special price

Various above-ground, double-walled tanks in sizes 5,000 / 7,000 / 10,000 / 20,000 litres Diameter 1,6000 and 2,000 mm