heating used for sale

Top condition, underground storage tanks, water tank, water tank, underground tank, diesel tank, heating oil tank, single-walled steel tank Content: 30 m³ / 30,000 litres Material: stainless steel tanks, very thick-walled Dimensions: approx. Ø 2.00 m x approx. 10.00 m long Weight: approx. 9.0 t Other: outside with new bitumen paint The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can be used as storage tank for water, liquid feed, whey, molasses, manure, AHL, ASL, seeping juice, rapeseed oil, cooking oil, rain collection tank, fire water tank, fire water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing cont ...

2 pieces Mosca strapping machines, bundling machine - used - : Price per piece from location: 2,295.- EUR (net)! Manufacturer: Mosca Type: RO-TR-13 Year of construction: 1997 Welded closure: Thermal Bandwidth: 5-9mm Belt voltage: Infinitely adjustable Belt unwinders: Belt coils inside- 200 Weight: 415kg mains voltage 200-440V Airpressure: 6 bar Air consumption: 5.4l/stroke noise emission: 75 dB measured according to DIN 45635 pressing pressure: downward max. 650N at 6 bar / upward max. 100N at 2 bar Afield: The fully automatic strapping machine for almost all packaging areas and package sizes: Width: 100mm - 550mm Length: 150mm - 600mm Height: 5mm - 400mm Machine Description: Fully Automatic Plastic Strapping Machine for Poly-Propylene Packaging Tapes. High connection voltage due to minimum distance from the transport plane to the locking unit. Transport speed of 0.1 -0.8 m/sec  ...

Single-screw extruder with new 7,5kW drive, new gear box, new cylinder and new screw 30 mm - 28 d, nitrated new ceramic heating elements, cooling fan, temperature sensors Control cabinet integrated in the machine frame Machine frame on wheels Stainless steel hopper

Heating method: steam or electric CIP is controlled by processor SIEMENS- S7

gas-fired preheating furnace type: KA_GB working temperature: 600°C max. allowed furnace chamber temperature: 750°C cennected load (el.): 2,5 kVA gas pressure: 60 mbar gas type: natural gas heating power: 130 kW (max. 150 kW) external dimensions (approx.) (w x h x d): 2000 x 3530 x 2500 mm useable dimensions (w x h x d): 1100 x 1330 x 1500 mm

The pictured furnace is a circulation chamber furnace. The furnace drives under a nitrogen atmosphere and acts as a stabilizing furnace e.g. for copper alloys. Furthermore, the products are scanned by a scanner located outside the cabinet and for the various products different programs can be stored. The controller automatically performs, provided for the product program. usable dimensions (w x h X d): 1000 x 1400 x 1300 mm temperature: 300°C, +/- 2K heating power: 72 kW

Make : Wolf Built: 1988 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.0 m (approx. WxH) Roller door: 6.0 x 2.3 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting, support rod 1200x40x3 mm Lifting platform : was defective, was scrapped Heating unit: 209 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust unit: 22,000 m3/h; 7.5 kW Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Nuremberg area Sales price: € 11,990,- net from location incl. dismantling We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, light ...

Qty. 1 Second-hand gas heated log furnace including hot shear Mfc.: ELHAUS Type: L250-90/135/4FK – WS250BD Built: 1999 Log dia.: 10” – 254 mm Log length: 5 – 7 m Billet length: 650 – 1300 mm Min. shear temperature: depending on the alloy approx. 340 – 400 °C Log temperature max.: 530 °C Heated by natural gas Hu=8.600 kcal/Nm³ Gas consumption: 234 kWh/tAl – 23.5 Nm³/t Al El. power: 130 kW Number of heating zones: 4 Number of circulating zones: 3 Dimensions of the furnace: 14.75 x 2.2 x 3.9 m - L x W x H Hot shear Recoil pressure: 0 – 100 bar Recoil stroke: 1.85 m Shear force: max. 1.69 MN at 210 bar Shear stroke: 360 mm Output pressure: max. 160 bar Output stroke: 325 mm Closing pressure: 210 bar Spreading stroke: 2 x 4.0 mm Dim.: Height above hallway: 2.9 m Length over everything: 3.95 m Width over everything: 2.65 m Hydraulic station Max. ...

Autumn HR rapid 15 cream maker, old model with double jacket, beaters and Stainles. Heating is untested, as the jacket is not filled. Machine is equipped with stepless speed regulation. Scraper for boilers is not to install. Machine should be checked by time.

Dry air dryer No.: OD4 2201-4639 8.8 kW 400 V 50 Hz with funnel and auxiliary heating: T200 IX IZ 525-4639 Type: F2 Nr: 1AL 5153 4639 1,1 KW 400 V 50 Hz

In 2007 Floor press from BÃ?TFERING, type 4 H 100,. Lower piston design Pressing area of 1250 x 2200 mm Aluminium plates electrically heated Total pressure of 100 to Operating pressure 320 bar spec. Pressure 3.5 kg/cm2 with full interpretation spec. Pressure at 80% design 4.5 kg / cm2 Hydraulic power 380 volts, 50 Hz, 1.5 kW Press plates: 2 piece ELKOM electric heating Panel solid hard aluminum in the thermally stable sandwich construction for temperature applications up to 200 ° C 2200 x 1250 x 18 mm + 19 mm Mono Lux + 19 mm V 100 insulation plate 17,500 Watts, 400 volts, 3 Ph. Surface smooth, flat, screw-free, gold anodized Plate construction hides more-row from the bottom screwed maximum continuous temperature 200 ° C incl. 2 piece cooling plate in Sandwitchbauweise. This is mounted below the insulation. The heatsink must be with a cold ...

Material: Stainless steel Drive: 9.9 KW Volume: 356 ltr. Boiler: Max. Operating pressure: Chamber 3 bar - 1 bar / Heiraum: 4 bar; Max. Operating temperature: utilizable space: 143 ° C / boiler room: 151 ° C; Content usable space: 330 ltr. Capacity heating: 26 ltr.

Double-Z Kneader with heating cooling jacket, tilting; Manufacturer: Kurimoto Material: stainless steel product contact areas Volume: 1275 ltr. Dimensions: L 3.50 m x W 2.00 m x H 2,20 m Weight: 6000 kg.

MTI P-10 laboratory mixer The laboratory mixer is suitable for mixing, homogenizing, dispersing and suspending of low-to high-viscosity products, heated, pressure and vacuum resistant Heating cooling jacket 5 bar Product space-1 / 0.75 bar Tank 15 l, Volume 11 litres. The machine includes two containers heated, presses a vacuum pump and a dispensing device to high-viscosity products from the mixing container. The documentation is available.

LUTRO painting booth diagonal ventilation on the side: Make : LUTRO Built: 1996 Dimensions: 4.0 m x 6.5 m x 3.5 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 3 pcs recessed luminaires with 4 x 58 W each Entrance gate: 2.4 x 3.5 m (approx. WxH) Escape door: 0.6 m x 3.5 m (approx. WxH) Heating unit: 200 kW with Abig gas burner Dry temperature: 80 degrees C Supply air unit: 12,300 m3/h; 5.5 kW Exhaust unit: 12,000 m3/h; 5.5 kW Suction register: 2 pieces on the side, 2.6 x 1.1 m (approx. WxH) Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location: Friedrichshafen area Sell price: € 9,990,-, net from location without dismantling We also have other complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, ...

electrical heated tempering continuous furnace external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Painting booth for switching to dryer operation: Make : LUTRO Type : KSP7-BT Built: 1993 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps : LED, 2 x 4 pcs recessed luminaires with 3 x each ? W Entrance side: 2-leaf gate 2.3 m x 2.8 m (approx. WxH) Escape door: 0.6 m x 2.3 m (approx. WxH) Rusting: 5,620 x 1,910 mm (approx. WxD), 22 pieces 950x510 mm Heating unit: 242 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,000 m3/h Exhaust unit: 22,000 m3/h Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Schwaz, Austria Sales price: € 9,990,- net, from location, without dismantling We also have other complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, grating ...

Gas-heated bogie hearth drying oven (not for flammable paint) temperature max.: 420°C burners heating power:300 kW divided on 2 burners / zones circulation fans: 2 x 5,5 kW = 11 kW el. total connected load: approx. 15 kVA control zones: 2 PLC: Siemens S7 approx. external dimensions (w x h x d): 4700 x 4200 x 6000 mm length with extended bogie hearth: 11.000 mm internal dimensions (without bogie hearth) width: 4000 mm hight: 2900 mm (2500 mm usable with bogie hearth) lenght: 4000 mm max. charging weight:20.000 kg net

COMPLETE PANCAKE LINE for the production of plain, cherry, apple, pineap-ple, etc. pancakes Very little used, only 3 weeks in test production After that the management decided to invest more in existing pizza line and cancelled new products pancakes Pancakes 32g ø 80mm (According to pre-owner) â?¢ SCHENK T4096-5035-8 V1.0 contact fryer For baking of dough or meat products competely stainless steel, electrical heating, total length 11 m turning station, complete with 2 DáBáR TSA 800 fat spraying units 22 noz-zles, only used for testing purposes, like new â?¢ ALIMEC DOSATRICE dosage unit Closed for dough with 22 dosing heads with a max. dosing weight of 36 g per dosing head, only used for testing purposes, like new â?¢ MONDINI DTT/LC80 Dosing line for fruit pieces, 22 dosing heads, only used for testing purposes, like new â?¢ 2 DOMINO transport trolley ...

Hardening furnace ZWUT PSK-1 built by ZWUT. It is intended for various types of laboratory and industrial work. Technical data : - power consumed at T = 1350 degrees C: 4,10 kW - installed power: 5.5 kW - power supply voltage: 220 V, 50 Hz - secondary voltage of the autotransformer: 7-41, 1-3-58, 9-5-84, 4 - number of phases: 1 - nominal temperature: 1350 degrees Celsius - temperature control accuracy: 1.5 (or 0.2 + /%, when working with a feedback attachment) - type and number of silites: 8/150/150/10 mm / pcs - warm-up time to T: about 3.5 hours - usable dimensions of the heating chamber (height x width x length): 150 x 150 x 280 mm - furnace weight: 138 kG - weight of the cabinet: 81 kG

Press Type: Twin Cavities Mold Type: Segmented Type of Tires: Passenger and Light Trucks Bead Diameter Range: 16â â 20â Closing force: 650,000 Lbs / 3680 KN Heating System: Steam Bladder System: Hydraulic Water Max. Pressure: 20 Bar Power Supply: 18.5 KW, 380 V / 50 Hz Loader: Available Controls: Simatic S7

Demonstration device. The system is designed to work in a closed circuit. It has two separate chambers / phases, the first chemical solution and the second with soapy water. The device is designed to minimize the effort of mixing of substances. A micro-processor controlled system allows easy operation of the unit with a user interface. Inside / work Maß 2000 B x 1500 T x 1500 H Outer dimensions 2800 B x 1600 T x 1800 H Operated electrically Voltage 380 V Power 9 kW Frequency 50-60 Hz Water pressure 60 / 160-200 bar Chemical pressure up to 15 bar Phase I chemistry circuit closed heated chemical tank Phase II water / tap water Capacity 7-10L/min Heating capacity 30 80 ° C Tank capacity 200 L Control manual / automatic Remaining warranty up to 12 months Continuously exhibition equipment on sale

Showroom machine Firing furnace powder furnace divisible Romer SLP-90 O D + t convection baking oven Powder furnace new SLS - 90 / O D + t Transit oven divisible Memorized 1400 wide x 2000 height x 6500 depth Dimensions 1920 wide x 2810 height x 6800 depth Electric power supply Rated power 90 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on either side - passage oven Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: selectable Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Door double two doors on two sides (Durschlaufofen) Divisible Motor 1,1 kW 6480 L capacity Warranty 12 months

Demonstration device Working mass: 800 B x 500 H x 600 D External dimension: 1100 B x 1300 H x 900 T Operation: electric Heating power: 6 kW Voltage: 380V Frequency 50-60 Hz Frequency Ultrasound: 20, 5 kHz Ultrasonic power: 2.4 kW Warranty 12 months

Dryer Multimatic ERG 55 Technical data see pictures Is in good condition. Specifications (manufacturer): -Manufacturer: GIRBAU S.A. / Spain -Model/type: ERG S5 -Fabrikationsnr.: 99026498 -Model: 001ERG055000 -Year of production 1998 -electrical connection: 3 ~ 380V 50 Hz 50,0A -electric power consumption approx. 0,74 kW -Motor power consumption 21 kW -Heating with gas -Gas connection natural gas city gas / G20

MATEC ZRP 320 Inox Pharma gear pump with sep. Fans for exact delivery quantities MATEC gear pumps are very precisely made of high-quality material. The pumps have been specially designed for the promotion of gel-like media of the pharmaceutical and food supplement industry in the viscosity area 2500-4000 MPas developed. The slanted gears guarantee a quiet, pulsation-free and precise transport. With the help of frequency converters, the flow rate can be adjusted exactly to the current demand and the motor can be controlled from normal 50 Hz frequency down to 1 Hz or up to over 80 Hz. The almost leak-free operation allows an exact dosing conveying without empty pump operation. This preserves the quality of the medium. Pump heatable with 2 el. Heating cartridges up to 100°C, temperature sensor, temperature control unit new Spare Parts/Service MATEC CH-4952 Eriswil/EN-79618  ...

Chromium Plating Technology The Modern chromium plating technology. The year 2009 and is in service since then in single-shift model. The type of chromium is hexavalent. The line is equipped with automatic transport system for moving of girders among the tanks within the line lengthways and crosswise. There is as well a powerful ventilation system installed above the production line. The Basic purpose of investment is chrom plating of towel radiators of various types and dimensions. The Average quantity is 2 pcs. of radiators per girder. The Maximum product size for application is 2.000 mm in length, 1.400 mm height and up to 250 mm width. Capacity The planned capacity of the technology in two work-shifts is about 25.000 PCs. Per year. The cycle time per girder achieves 12 minutes. There is as well a possibility of capacity increase due to installing of additional chemical tanks with ...

Laser printer for plastics FARSOON eForm 3D built in 2017. The printer is offered with complete equipment for preparing powder and cleaning prints. The equipment was used to a small extent for about 12 months, it worked for about 2000 hours. The device operated in a gas shield from a cylinder. Complete with printer: 8 nitrogen regulators. Technical data of the FARSOON eForm 3D printer: - open control software: any modification of printing parameters - laser type: CO? - laser power: 30 W - dimensions of the printing chamber (W × D × H ) : 250 × 250 × 320 mm - single print layer: 0.06 ~ 0.3 mm, adjustable - maximum creation / build speed: 0.8 l / h (depending on the material) - precise scanning system: Galvo - scanning speed: 7.6 m / s - power requirements: 380 VAC, 50/60 Hz, 16 KVA, three-phase five-wire - maximum temperature in the chamber: 190 degrees C - heating el ...

- agregat card ARB 425 - analog output card ARB ARB 390 - output card ARB 409 - base board card SN. 193170 + SN 143537 ARB 729 + SN 173858 - panel card ARB 256, ARB 414 - control card ARB 692 - CPU card ARB 726, ARB 251 - diagnose card ARB 389 - disk controller card ARB 500 - input card ARB 254, ARB 705 - injection control card ARB 460, ARB 328, - elektronic card ARB 252, ARB 255, ARB 380 - inside press card ARB 259 - base board card ARB 372, ARB 523 - motor control card ARB 307, ARB 440 - 24V card ARB 381 - proporcional valve card 0 811 405 047, ARB 330 - memo card ARB 339, ARB 508, ARB 526 - heating control card ARB 365, ARB 404, ARB 530 ARB 640, ARB 730, yPIII - distributor card ARB 511, ARB 534, ARB 538, ARB 539 - video card ARB 258, ARB 535 - amplifier card, modul card - rectifier - transducer card ARB 302, ARB 399, ARB 733 - power supply Deutronic ED-60 -  ...

CNC portal fraese and 3D engraving machine T-Rex 0712: equipment / product data of cnc-Fraesen Type High-Z/TRex series: Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all Y axes from HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand make! Rapid speed max. approx. 17,000 mm/min working speed max. approx. 12,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area of the groove plate / T-slot table: 1650 x 880 mm travel distances: X=1200mm; Y=700mm; Z= 130 mm contact contact sensors / reference switches / limit switches on all axes Double secured emergency release energy chains for cle ...

PUR bag melter for processing from 2 to 3 kg PUR-DIN aluminium foil bags, Technical description: Hose connections, temperature controller PT100, 2 internal heating circuits, storage tank approx. 2.8 kg volume for bag change, 1 gear pump 7.3 cc drive via three-phase motor, glue stop shut-off direction, level monitoring for the Bag change with optical and acoustic signal, electronic Control with larsicht input (multilingual), weekly timer, digital inputs and outputs for integration to the mother machine, melting capacity adhesive-dependent, temperature reduction, Operating voltage 400 V Including - Hot glue hose length 3.5m i.D.10mm - Application head large glue outlet 5.6mm probe Pt100 - Homag cover plate QA65 with hose aging re - Switching amplifiers - Teflon probe S-506

CAB ex Shibaura CM 364, well preserved. With doors, keys, heating, roof hood and working headlights. More cabins, parts or subassemblies ex Shibaura CM 364 and other machines available.

Painting facility Königsmoos: Make : Wolf Built: 1989 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply air ceiling : Filter ceiling Lamps: 2 x 4 pcs. recessed luminaires with 4 x 58 W each Entrance side: 2-wing gate 2.35 m x 2.85 m (approx. WxH), glazed Escape door: 2 pieces, 0.6 m x 2.0 m (approx. WxH) Rusting : the existing rusting remains on site - we can offer alternatives Heating unit: 209 kW, oil burner Energy saving: Speed control with frequency inverter Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust air unit: 22,000 m3/h; 7.5 kW Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Ingolstadt Area

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

Make : LUTRO Type : Special plant BU EI S Built: 1990 Dimensions: 4.8 m x 7.0 m x 3.9 m (approx. WxLxH), total height 5.5 m Supply air ceiling : Filter ceiling Lamps: 2x4 pcs. Recessed luminaires, 4x58 W + 2x3 wall recessed luminaires on the side Entrance side : Roller door 4.0 m x 3.9 m (approx. WxH) Exit side : Roller door 4.0 m x 3.9 m (approx. BxH) Escape door: 2 pieces, 0.6 m x 2.1 m (approx. WxH) Grating : Full-surface grating, 80 pcs. 690x560 mm, support rod 560x50x3 mm Heating unit: 291 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,000 m3/h Exhaust air unit: 22,000 m3/h Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Stuttgart area Sell price: € 14,500,- net from location, without disassembly

Horn pump Cabinet consisting of: -2 x Horn pump MP 5 (700 l / min) -> For heating oil, diesel and bio-diesel Technical data: Max capacity: 700 l / min Supply voltage: 400 / 50 V / Hz Capacity: 2, 5kW Inlet: DN 80 Pressure connection: DN 80 Maximum suction height: 4, 5 m Protection class: IP 44 Pump Cabinet is painted and fully functional! The pumps can be expanded like at extra charge out of the closet, but we would prefer a sale as a complete package!

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

construction height: 2.800 mm height of stroke: 3.800 mm lifting forece: 4.000 KG equipment: - cabinet - safety cover - Rexroth hydrostatic drive - lenghtwise-cross-cirrcle- and diagonal drive - all around lighting and reversing alarm - XXL broad cabinet - door for cabinet - heating for cabinet

DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may ... WEINIG High Performance Profile Machine, Type Hydromat 22 BL Built in 1995 with splitting unit (lamella saw) Bring (au ...

Mfc.: OBRAM Type: ZP43 M00 Built: 2003 Revamped 2007 Capacity: 12 000 l/h Holding time / heat treatment of the product: 30 seconds Temperature: 96 - 98 ° C Washing CIP Controls on the controller: Siemens S7 Heating exchange with plates Overview Service unit: March 2014.

Model SLP-15/O - available immediately! Memorized width 1200 x 1600 height x 1800 deep Dimensions 1720 width x 2410 height x 2100 deep Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta,  ...

Model SLP-15/O - available immediately! Memorized width 1200 x 1800 height x 1600 deep Dimensions 1720 width x 2610 height x 1900 depth Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Control: 7 "touch screen Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating ...

Qty. 1 Second-hand continuous galvanising line Mfc.: POSCO Built: 1997 Capacity: approx. 100 000 per annum Strip width: 720 – 1250 mm Thickness: 0.2 – 1.6 mm De-Coiler ID 508 mm OD 2000 mm Weight: 20 Tons Finished product: Coil Strip width: 720-1250 mm Thickness: 0.2-1.6 mm ID 508 mm OD 1600 mm Weight: 10 Tons Sheet Strip width: 720-1250 mm Thickness: 0.2-1.6 mm Weight: 3 Tons Line speed Entry section: max. 150 m/min. Process section: max. 120 m/min. Exit section: Coiling max. 150 m/min. Shearing max. 100 m/min. Threading speed: 20 m/min. Coating method Both sides coating, Regular spangle Coating weight 120-500 g/m² based on both sides Post treatment Chromating Electricity High voltage 10 kV Low voltage 380 V AC, 3 ph., 50 Hz, 220 V AC, 1 ph. Water Pressure min. 3 kg/cm² Steam Pressure min. 5 kg/cm² Temperature min. 158 °C Production process Coil s ...

Power range: 200 - 320 kW Rated heat output: 320 kW Maximum permissible operating overpressure: 4 bar Maximum permissible operating temperature: 120°C Length: 3250 mm Width: 2500 mm Height: 2440 mm Diameter of exhaust pipe: 300 mm Fire room volume: 0.77 m3 Power of the combustion air blower: 0.4 kW Power of the rust drive: 0.12 kW Smoke fan power: 2.2 kW Fuels: residual wood (wood chips with and without bark, coarse and fine content max. 20%, main part 60-100%) Fuels according to 1.BlmSchV of 15 July 1988 Water content of the fuel: W20-W40 (dry to moist) Fuel size: G30,G50 (fine wood, medium chip) Feeding: Automatic (manually possible by filling door in emergency mode) The plant is offered with the following attachments: • Insertion unit with insertion screw, motor and attached rotary valve (measurement from boiler output: 1000mm (length) 700m (height with rotary ...

Used autoclave PANZER, type: 240E -completely refurbished- - Heating type: electric - Boiler capacity: 240 litres - El. Power: 18 kW - El. Connection: 400 V, 50 Hz - Working pressure: 2.5 bar - separate control with F-value control - Control optionally integrated or mounted on the side - Incl. data recorder via USB stick - Counter-pressure device - mobile - incl. 1 floor plate and 2 pieces 1/2 high baskets - Condition: very good, refurbished - 6 months warranty - Delivery time: approx. 7 days This device has been completely dismantled, all spare parts, such as backpressure valve, have been replaced and an acceptance has been carried out. The device is state-of-the-art and is sold with a 6 month warranty!

CIAT LGP 120V Product number:M14-4139 Cooling capacity:34,5 kW Refrigerant:R410A Refrigerant Content:3,3 kg Voltage:400 Volt Dimensions:883x798x1201 mm Weight:240 kg Year:2008 Number in stock:1 piece(s) Price:Quotation request Well maintained Ciat water chiller / heat pump with limited running hours. The heating capacity is 40,5 kW at an water outlet of + 45°C. Please visit also our website: used-refrigeration

1 KUSTERS 2-bowl rolling calender type 212.70-3200, 3200 mm Working Width (3400 mm face roller width), year 1993, top bowl chromed steel (thermal oil heated) diameter 450 mm, bottom bowl Racolan (S-roll) diameter 500 mm, Pressure 300 Newton/mm = 96 tons, maximum speed 100 m/min., maximum heating temperature 250 ºC, entry with metal detector, ELECTROTEX seam detector with automatic seam passage, exit by A-frame contact winder max. 1800 mm diameter, blower for cooling the bottom roller, water cooling system for edge of racolan sleeve, cooling rollers before exit, machine is controlled through SIEMES PLC, electronic speed control through MENTOR II digital drive, voltage 380V, 50 Hz, machine supplied with spare racolan sleeve and technical documentation

Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car; NEW

Used autoclave PANZER, type: 500E -completely refurbished- Electric autoclave with 500 litre boiler volume, with quick release and threaded spindle - Made in Germany - Completely made of high-quality stainless steel - All safety equipment (the latest requirement of the Pressure Vessel Ordinance) - Seemtl. Safety equipment such as safety valve, pressure gauge, overheat protection, steam drain valve, safety outlet valve, etc. - Construction and pressure testing included by TÜV - Including all necessary certificates - Full car. Control by F-value controller - Full car. Control of operating temperature, core temperature, pre-selection and operating time clock - Content: 500 litres - Heating type: Electric, 36 kW, 400 V - Operating pressure: up to 2.5 - 3.0 bar - Temperature range: Up to 130°C - Dimensions: B 1,200 x H. 1,150 x D 1,450 mm - Boiler diameter: 890 mm - Boile ...

capacity up to 2..500 bph 0.5l or cans The tunnel pasteurizer is Reversible mode Control Siemens Logo Heating method Steam - Plate heat exchanger in outside of pasteurizer The manufacturer year is 2016, new (It was the model for the exhibition in Brau Beviale)