We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,266 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
General SKU394U1110 LocationBarneveld MakeLauda TypeTR400 HK/K-EX Mach.No.HKS13075 Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity12.46 KW Temp.130 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Thermal oil heatercheck Therminol D12 Heating medium:oil Electric capacity12,46 kW, 400 volt (Ex) Temperature-35ºC/+130ºC With pumpcheck 2x Capacity18m²/h Motor5,5kW, 400/690Volt, 2925rpm (EX) (2x) Information Year of construction2013 With switchcheck CEcheck Floorspace1,75x1,0 m Total height2,45 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspe ...
used
General SKU394U1121 LocationBarneveld MakeLauda TypeTR400 HK/HK-EX Mach.No.HKS08025 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Temperating machinecheck Thermal oil heaterTherminol D12 Heating medium:Oil Electric capacity12.9 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck (2x) Motor5,5 kW, 400/690 volt, 2800 (ex) Information Year of construction2008 Total height2,50 m CEcheck Floorspace1,75x1,0 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Ba ...
used
Used semi-automatic PET bottle machine - ZENTRONIK ZR-7 1. Heating furnace for heating PET preforms 2. Semi-automatic PET bottle machine Single-head machine for 5 litre bottle Year of manufacture: 1998
used
Doughnut baker with a settling cart. Instead of the usual heating coils, you will find a highly efficient surface heating system at the bottom of the grease pan. In this way, you can bring your fat to the right temperature faster, more efficiently and more evenly with significantly less energy and can keep and control it in a well-dosed manner without overheating the fat. This technique also allows us to have a flatter design that allows you to use 40% less grease and therefore 40% less grease. It is obvious that subsequent cleaning is correspondingly easier. In the easy-to-use control system, you can store your recipes in up to 10 programs and start the automatic program sequence with a simple push of a button.
new
degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if ...
used
General SKU001A039 LocationBarneveld MakeUHDE Hagen No.2578 Year of construction1978, Internal coil built in 1991 Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4306 (304L) Stainless Steel Reactors ReactorHigh pressure Capacity20 Ltr Vessel sizesdia. 215x600mm Dished bottomcheck Dished top sidecheck With jacket/Electric heating Internal heating spiral(0,8 Ltr) Max. temperature350 Degr. C. With anchor stirrercheck (built in 1991) Motor0,55 KW, 220/380 Volt (Ex) Speed mixing shaftvariable (± 155-1120 Rpm) Information Mounted on legscheck Floorspace0,9x0,9 m Total height2,2 m Weight850 kg ATEX compatiblecheck Extra Specifications- Vessel does not have a bottom outlet Minerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSo ...
new
degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if ...
used
Plate dimensions: 1550 x 850 mm Daylight opening: 350 mm Number of daylights: 1 St. Heating: ja Total pressure: 60 to Motor output: kW Dimensions (L/W/H): 2,3 x 0,85 x 1,73 mm weight of the machine ca.: 2,5 t Electric 380 Volt: Hydraulic veneer- or board press with printing capacity of 80 t, shutdown when the final pressure output is reached and heating in the lower/upper plate. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if ...
new
degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if ...
used
General SKU394U1113 LocationBarneveld MakeLauda TypeTR 400 HK/KT-EX Mach.No.HKS08024 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Thermal oil heaterTherminol D12 Heating medium:Oil Electric capacity 12.9 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18m²/h Motor5,5kW, 400/690Volt, 2880rpm (EX) (2x) Information Year of construction2008 Total height2,5 m CEcheck Floorspace1,75x1,0 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barn ...
used
Permissible operating overpressure: 6.0 bar Permissible flow temperature: 120 C Permissible boiler power: 400 kW Heating output: 444 kW Content: 380 liter Burner: Weishaupt RGL 3/1 - E Year: 1994 Fuel: Heating oil EL and natural gas Subject to prior sale - errors possible Internal Reference Number: D-1176
used
Collin Heating Press for Forming Plastics Collin Heating Press 78 Tons for Forming Plastics / Prepregs for Carbon Parts / Composites Type: Press 500 P Plate press for plastics processing / polymeric materials / ceramic masses Pressing pressure approx. 78 tons Temperature range from 20° to 300°C Usable pressing area 496 x 496 mm Voltage: 3 x 400 / 230V Y Power requirement: 3 x 125 A Frequency 50 Hz Power 67 KW Water pressure 4 bar Air pressure 4 bar Hydraulic pressure build-up, Pmax hydraulic: 160 bar Built in 1999 Weight approx. 5 tons Documentation and circuit diagrams available
used
General SKU394U1123 LocationBarneveld MakeLauda TypeTR 400 HK-EX Mach.No.HSK08028 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity6.45 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Thermal oil heaterTherminol D12 Heating medium:Oil Electric capacity 6,45 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2880 rpm (EX) Information Year of construction2008 Mounted on framecheck Total height1,75 m CEcheck Floorspace1,75x1,0 m Weight1000 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...
used
General SKU394U1134 LocationBarneveld MakeLauda TypeTR 400 HKT/KT-EX Mach.No.HKS08032 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit MaterialStainless steel 1.4571 (316Ti) Thermal oil heaterTherminol D12 Heating medium:Oil Electric capacity12.9 kW, 400 volt (Ex) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2880 rpm (EX) (2x) Information Year of construction2008 Total height2,5 m CEcheck Floorspace1,75x1,0 m Weight1800 kg ATEX compatiblecheckTemperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in ...
used
General SKU394U1125 LocationBarneveld MakeLauda TypeTR 400 HK-EX Mach.No.HSK0835 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Thermal oil heaterTherminol D12 Water heaterWater/Glycol Heating medium:Oil/Water/Glycol Electric capacity12.9 kW, 400 volt (ex) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2880 rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) Information Year of construction2008 Mounted on framecheck CEcheck Floorspace2.20x1,0 m Total height2,30 m ATEX compatiblecheck Extra SpecificationsThis Lauda is equipped with a heat exchanger. Brand: Merck Built by: Herbst Maschinenfabrik GmbH Factory number: 08-12583-26/1 Material: 1.4571, Stainless Steel 316TI Jacket data, pressure: -1/+16bar, test pressure: 25.2bar ...
used
2 doughnut bakers with two weaning trolleys. Instead of the usual heating coils, you will find a highly efficient surface heating system at the bottom of the grease pan. In this way, you can bring your fat to the right temperature faster, more efficiently and more evenly with significantly less energy and can keep and control it in a well-dosed manner without overheating the fat. This technique also allows us to have a flatter design that allows you to use 40% less grease and therefore 40% less grease. It is obvious that subsequent cleaning is correspondingly easier. In the easy-to-use control system, you can store your recipes in up to 10 programs and start the automatic program sequence with a simple push of a button.
used
Miwe Condo 4 cookers with 2x 60x80 trays each Connection 5x32 KW with 2 new heating plates 1 x new heating element with proofing chamber On order to sell
used
WALTER BRUCKS coating pan Stainless steel With ventilation and electric heating Speed variation Alternating rotation, Elec: 380 Volt 50HZ, Heating: Yes, Turbine diameter (mm): 950 mm, Turbine depth (mm): 550mm, Turbine material: stainless steel, Dimensions (mm): 1000x1500mm H 2100mm, Rotations per minute: 9 - 26 , Last use: December 2020
used
General SKU349U1124 LocationBarneveld MakeLauda TypeTR 400 HK-Ex Mach.No.HKS0836 Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Thermal oil heatercheck Therminol D12 Water heaterwater/glycol Heating medium:oil/water/glycol Electric capacity12,9kW, 400Volt (EX) Temperature-40°C/+200°C With pumpcheck (2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) Information Year of construction2008 Mounted on framecheck Total height2,30 m CEcheck Floorspace2.20x1,0 m Weight1600 kg ATEX compatiblecheck Extra SpecificationsThis Lauda is equipped with a heat exchanger. Brand: Merck Built by: Herbst Maschinenfabrik GmbH Factory number: 08-12583-26/2 Material: 1.4571, Stainless Steel 316TI Jacket data, pressure: -1/+16bar, tes ...
used
TECHNICAL SPECIFICATIONS Manufacturer: LIEBHERR Description: Semi-Mobile Concrete Batching Plant Type: Mobilmix 2.25R DW Year of construction: 1998 Mixer Nominal Size: 2.25 cbm Throughput (at 30 s mixing time): approx. 100 cbm/h Number of cement silos: 3 pcs. Cement silo capacity: 3 x 80 t (1 double chamber) Number of cement augers: 4 pcs. Pocket row silos: 6 bags (4 x 17.5 cbm, 2 x 35 cbm), Capacity of row silo: 140 cbm Concrete discharge height: 4.0 m Weighing belt maximum load: 6,000 kg Cement scale maximum load: 1,200 kg Spirit level: 600 kg Additive dosage: 25 kg Control: LIEBHERR Litronic (in container) Heating system: Heating oil Recycling plant: FMW Operating voltage/frequency: 400 V / 50 Hz
used
Description: Technical data: tape thickness: 0.3 - 3 mm material thickness: 8 - 60 mm conveyor speed: 18 - 25 m / min The edgebander consists of the following aggregates: • 2 pre-milling machines for material processing (3 kW each) • material heating lamp • glue heating vessel • container with roller for applying glue to the material • push rollers • 2 stripping units (each 0.8kw) • 2 units with radial cutters for processing the upper and lower edges (1.5 kw each) • 2 postforming aggregates • 2 cyclings • polishing brushes with liquid injectors The edging is fully automated, which means that the height of the beam, pre-milling machines, rollers and all the settings of the cutter depending on the thickness of the material and the strip are adjusted on the main monitor. serial number: 0-200-19-0792, edge thickness: 0.3 - 3 mm, workpiece thickness: 8 - ...
used
Magnetic stirrer with heating function and the ability to set the time after which the process is to stop. For laboratory and other applications. Works great with magnetic dipoles, glass, PTFE and stainless steel containers. Equipment in factory packaging, with manufacturers instructions and software. Power cable included. Temperature probe included. The device can work with or without the probe, as it has a built-in temperature sensor in the heating plate. Included rs-232 dsub9 cable and dsub9 - usb adapter. The device is marked new (other) because it was purchased for software testing. The equipment has been run a maximum of 10 times and connected to a computer to check the correct operation of the software being developed. Digital display of speed and temperature. Additional safety circuit. Cooktop is disconnected by two independent temperature sensors Connecto ...
used
Veneer press Ott Type: JU 65 Pressing surface 2250 x 1200 mm 2 electrically heated plates Total pressing pressure 65 tons Spec. Pressing pressure at full occupancy 2.4 kg/cm² Spec. Pressing pressure at 2 m² occupancy 3.25 kg/cm² Printing cylinder 4 x diameter 80 mm Rack and pinion guide Maximum opening between plates 300 mm Connection per heating plate approx. 6.0 kW Hydraulic pump approx. 1.1 kW Total connected load 12 kW Heating time approx. 20 min. Dimensions 2600 mm x 1330 mm x H 1760 mm Weight approx. 2800 kg
used
Linear runner for applying sign or wrap-around labels (wet glue) to cylindrical containers., Perfomance:, approx. 25-100 labelings/min freely adjustable via frequency converter, Design type:, Left-hand machine (The overlapping direction of the wrap-around labels depends on this), gluing:, 210 mm brass glue roller with quick change device with one pitch, from 19 to 3 mm (horizontal stripe gluing over the entire length of the label), label magazine:, Up to 3,500 labels with a length of 80-380mm, Working height of the conveyor belt:, 1,000mm, adjustable +-50mm, Carrier:, 80.5mm chain, length approx. 3m/ with snail, glue supply:, pleumatic glue pump with heating, Paintwork:, light gray Ral 7042, unless stainless steel, Electrical equipment according to VDE regulation: 400 volts, 3 phases, 50 Hz, control voltage 24, Volts / PLC Siemens, Degree of protection: IP-54, Connection value: approx. 0 ...
new
Heating elements / heating rod for quail stove New( 4 pieces )Material :Ceramic715 / 630 mm230 Volt / 250 WattFor details see picture
new
Heating elements / heating rod for quail stove New( 4 pieces )680 / 630mm230 Volt / 250 WattFor details see picture
new
Heating elements / heating rods NEW( 4 pieces )for MIWE furnacePower : 250 WSpannung : 230 Vgestr. Length : 1350 mmof which unheated : 2 x 100 mmTube diameter : 8.5 mmPipe sheath material : 1.4571 / AISI 316 TiConnection : Thread M4Closure : SiliconRHK bent : U-shape center-center 60mmFastening: angle plate 84 x 21.5 x 8 mmFor details see picture
new
Heating elements / heating rod for quail stove NewCeramic( 4 pieces )715 / 630 mm230 Volt / 350 WattSee picture for details
used
General SKU403U1196 LocationBarneveld MakeJenaer Glaswerk TypeDSV50 Year of construction1995 Pressure Vacuum possiblecheck Main Features MaterialGlass Surface0.1 m2 Specified Features - Film evaporator Film evaporatorcheck Heating surface0.1m² Rotor sizesDia. 33,6x 500 mm With jacketcheck Rotor with fixed bladescheck Number of stages on rotor:1 Number of blades2 Motoreurostar kika labortechnik With variable speed drivecheck Rotor speed50-2000rpm With condensercheck Heating surface0,05m² MaterialGlass Information Mounted on framecheck Total height3,75 m Floorspace1,6x1mNew arrivalsFilm evaporatorsJenaer GlasNew arrivalsColumns > Film evaporatorsBrand > Jenaer Glas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...
used
Net pressure: 400 kN Surface pressure: 3.2 N/mm² Clamping plate dimensions: 500 x 250 mm ram plate, 500 x 550 mm table size Temperature control: No heating plates installed Number of floors: 1 floor Plate spacing: 755 mm without heating plates Number of cylinders: 1 Press piston Ø: 130 mm Press piston stroke: 400 mm Guide columns: 2 x Ø 90 mm Velocities: Rapid traverse up to 79 kN: 113 mm/s Press pass at 150 kN: 19 mm/s Press pass at 400 kN: 63 mm/s Return stroke: 300 mm/s Return stroke, delayed: 50 mm/s Table height: 700 mm at ground level from the floor Ejector: No ejectors (central bore closed by inserts in the table top Ø 90 mm) Hydraulics: Oil hydraulics with Rexroth valves, 400 l tank, 30 - 300 bar INLINE Hydraulic Axial Piston Pump, ABB Pump Motor 11 kW Safety: light barrier at the front; Safety grilles on the sides and rear Power supply: ...
used
Description: Manufactured: 2005 Serial number: 1226 Operating hours: 5.745.000 cycles Material: PS, PVC, PET, PP, EPS Stations: Forming, Cutting and Stacking Forming Area: 770 x 650 mm Maximum Film width: 820 mm Maximum forming depth: 120 mm Maximum dry cycle speed: 30 cycles/min Max.Closing Force of the Cutting Press: 60 ton Maximum Pressure: 6 bar Vacuum pump motor power: 2,2 kW Total heating power of the upper oven: 36 kW Total heating power of the lower oven: 33 kW Vacuum pump capacity: 100 m^3/h Dimensions (L x W x H): 10,0 x 2,4 x 2,7 m Total Weight: 8000 kg Approx. Onsite Dimension. (l x w x h): 12,000 x 2,000 x 2,600 mm, weight approx.: 8,000 kg
used
Key data: 160 °C
Temperature control unit for tools - HB-Therm HB-160Z1 (2pcs.) Year of construction: 2010-2014 Description: Max. heating capacity - 160°C Heat Transfer Fluid – Water Heating capacity: 8 kW Cooling capacity: 30 kW Device has: - a vacuum pump - a vacuum chamber - a function to extract medium from the tool - The device can be integrated with the machine, unattended All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
used
Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20?C / +230?C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Sold with protective cover.
used
Description: Injection: Spindle diameter : 52-60-70 mm  ,L/D ratio : 20,5 Maximum injection pressure : 2366-1777-1305 bar Injection volume : 637-848-1154 cm3 Maximum injection weight : 577-768-1045 g Plasticising capacity : 58-105-120 g/s Injection flow rate : 333-443-603 Cm3/s Adjustable screw speed : 338 min1 Spindle torque : 2226 Nm Heating zones : 4+1-4+1-4+1-5+1 n Heating power : 18,78 -20,58 _27,18 Kw Maximum nozzle support force : 90,7 Kn Maximum nozzle stroke : 400 mm CLOSING Closing force : 2500(250) Kn(Tn) Maximum opening stroke : 550 mm Adjustable mould thickness from , : 200-650 mm Pitch between columns Hx V : 560x560 mm Plate dimensions : Hx V : 830x830 mm Maximum distance between plates : 1200 mm Diameter of the columns : 100 mm Maximum ejection force : 87.95 KN Maximum ejection stroke : 200 mm GENERAL Cycles (euromap 6 a): 30 min-1 Engi ...
used
Description: Serial number: 28619, weight: 44,000 kg, Injection unit: Screw diameter 90 mm, metering stroke: 390 mm, screw speed 5-125 r/min, plasticizing flow: 80 g/s, injection flow: 442 g/s, max. stroke volume: 2,481 cm³, max. injection weight: 2,233 g, specific injection pressure: 1,300 bar, nozzle stroke: 600 mm, nozzle contact force: 150 kN, heating power: 56 kW, number of heating zones INC.nozzle 6, weight of injection unit: 11 t Clamping unit: Clamping force: 3,500 kN, clamping force: 3,850 kN, opening stroke: 700 mm, ejector force: 70 kN, ejector stroke: 240 mm, mold installation height max. 880 mm, min. 300 mm, ramp platen total size: 1,640 x 1,640 mm, tie bar diameter: 140 mm, weight of clamping unit: 33 t, oil filling: 580 l, Equipment: toggle lever equipment Note on condition: all peripherals possibly visible in the photo, such as robot arm, etc., are not included in the ...
used
Description: Serial number: 42169, Own weight: 7,000 kg Injection unit: Screw diameter: 80 mm, metering stroke: 310 mm, max. stroke volume: 1,558 cm³, screw speed: 183 rpm, standard screw length: 20 L/D, plasticizing capacity: 90 g/s, injection flow: 478 cm³/s, specific injection pressure: 1,400 bar, specific injection pressure increased: 1. 640 bar, nozzle stroke: 650 mm, nozzle pressing force: 110 kN, heating power: 34 kW, number of heating zones including nozzle: 5, pump drive power: 55 kW, oil filling main tank: 1,000 l, oil filling suction tank: 850 l, weight of injection unit: 7 t Clamping unit: Clamping force 6,000 kN, opening force: 300 kN, moving cylinder force: 150 kN, opening stroke: 1,200 mm, mold installation height min. 800 mm, platen distance max. 2,000 mm, platen size HOR.X.WERT. 1,580 x 1,300 mm, ejector stroke: 250 mm, ejector force: 110 kN, weight of clamping unit: 4 ...
used
Description: Belt width: 800mm Inlet height: 50mm Sections: 1st heating 2. heating 3. ventilation 4. cooling Approx. Onsite Dimension. (l x w x h): 10,000 x 1,400 x 1,200 mm, weight approx.: 4,500 kg
used
Description: Power: 52,000W Belt width: 1.100mm Inlet height: 50mm Sections: 1. heating 2. heating 3. ventilation 4. cooling (only with external air conditioning) Machine has already been dismantled Approx. Onsite Dimension. (l x w x h): 10,500 x 1,600 x 1,200 mm, weight approx.: 5,000 kg
used
The Fz94 pro lab Roaster is an electric coffee Roaster which gives you full control over the roasting process. It has 3 heating elements (each of it has 1000 watt)which can be controlled individually. Drum speed and venting intensity can also be controlled and variated. Batch capacity ranges from 100g up to 2.4 kg. Bean temperature and exhaust temperature can be monitored and recorded via an usb connection. Roaster can be hooked up to Artisan or Cropster. Continuous roasting is possible as chaff collector can be emptied during roasting. Perfect for shop roaster or lab roaster. We got our Fz94 on October 2020 and used it till spring 2022 when we upgraded to a larger roaster. We roasted approximately 2 tons of coffee with this roaster. It was our production roaster until we needed to grow bigger. All 3 heating elements where replaced and are quit new. We had a small fire in ...
used
Description: Machine number: 44575 Spindle diameter 25 mm Stroke 120 mm Spindle speed 380 rpm Max. screw torque 300 nm Max. injection volume 127.6 cm³/s Max. stroke volume 58,9 cm³ Max. injection pressure 2400 bar Max. injection power 42 kW Nozzle stroke 600 mm Nozzle pressure force 14 kN Installed heating power 6.8 kW Closing force 1000 kN Opening stroke 420 mm Mould installation height max. 420 mm, min. 150 mm Ejector force 23 kN Ejector stroke 130 mm Increased clamping plate 740 x 700 mm Width of ejector shaft 470 mm Dry running 1.6 s ENGEL CC 100 control system, 1 pneumatic core pull Tool heating circuits 8 Internal pressure switch KISTLER Nominal voltage : 3x400 + N+ PE /50 Hz Switching load : 95 Kw Rated current : 145 A Voltage control : 230 v AC / 24v DC Approx. Onsite Dimension. (l x w x h): 2,900 x 1,900 x 1,600 mm, weight approx.: 9,500 kg
used
Full Automatic Form, Fill and Seal Packaging Machine OPAK MAKİNE QZ 1000 MAXI Packaging Product: Processed cheese + Bread Sticks Grissini Bottom Foil Material: PS, PET + PE, PVC + PE (300 mm) Top Foil Material: ALU+PE (280mm) Filling: Automatic Vacuum: 205 m3 DVP Italy (0.1 mBar) Capacity: 8-10 cycle/min Machine Dimensions: 8000x1400x2100 mm; Monoblock Chassis/ Independent Stations Chassis Material: AISI 304 Stainless Steel Mould Material: 7075 ve 5083 Aluminium PLC: OMRON (full-color touchscreen panel) (JAPAN) Pneumatic: FESTO (GERMANY) Electric: Telemecanique™ Schneider Electric Security: Emergency Stop button on Operator Panel and Chassis, Automatic stop switches for low air pressure. Circuit voltage: 380 V, 3 phases, 50 Hz Pressurized Air Requirement: 6 - 8 bar, Max 1600 L/min (Clean and dry) Chilled Water Requirement: 10 - 16°C refined from minerals, Neutral pH, ...
used
Splicing machine with glue thread Make: Casati Type: Z 2000 technical details: arm length: 1.200 mm veneer thickness: 0,4 - 2 mm feed speed: approx. 5 - 40 m/min. noise measurement: 73,5 dB compressed air consumption: 0,05 l/min working pressure: 6-8 bar overall dimensions: 2.050 x 600 x 1.400 mm This model is specially designed for the users requiring high production and considerable working speed also when using difficult materials. - stepless change of heater oscillation angular speed, independent of the linear feeding speed - accurate adjustment of the feeding friction pressure - adjustment of the starting point and stop point - thread heating by electric resistance - amperometer on the control panel for an accurate adjustment of the heating temperature - zig-zag height adjustment - automatic breaking of the thread - all functions are operated on the con ...
used
PRESS DESIGN drive system: hydraulic openings in uprights: yes number of suspensions: 1 number of slide actions: 1 slide ejectors / cushion: yes opening in table: no PRESS FORCES total force (nominal): 800 to PRESS TABLE table surface (left-right): 1300 mm table surface (front-back): 1300 mm SLIDE stroke: 700 mm SLIDE EJECTOR / CUSHION nominal force: 5 to stroke: 20 mm TOOL ASSEMBLY DIMENSIONS distance table - slide max.: 1200 mm distance between columns (H-frame): 1325 mm ELECTRICAL SPECIFICATIONS total power consumption: 400 kW DIMENSIONS / WEIGHTS total height: 6100 mm total weight approx.: 55000 kg ATTACHMENTS (PRESSES) press automation: yes acc. to actual ...
used
CONTROLS PLC SIEMENS S7 300 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE length: 9000 mm width: 350 mm ELECTRICAL SPECIFICATIONS total power consumption: 278 kW mains power supply: 450 kVA mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 10300 mm space requirements -front/back-: 2500 mm total height: 2650 mm total weight approx.: 9000 kg 3-lane system with 350 mm usable width each Process sequence: Stage 1: Cleaning (70 degrees) Stage 2,3,4,5: Rinsing (65, 60, 60, 55 degrees) Stage 6: Hot air drying (65 degrees) Oil separator: continuous oil discharge Heating:   ...
used
Includes (1) Single Screw Extruder PME60/35, screw diameter: 60mm, screw length: 35D with degassing vacuum pump, barrel heating zones: 7x 20kW, throughput: 60-180kg/h, power: 70kW, with integrated electrical control cabinet with temperature controllers and all connections, continuously operating screen changer type L-026 with two channels, granulating nozzle for 20 strands, stainless steel water bath with deflection rollers and cooling fan, dosing unit with hopper, (2) Double Screen 800/300 stainless steel with double screen chute, round perforation 8mm for downstream connection of a transport suction unit, monitor control, strand pelletiser GR 250, infinitely variable collection heating, single knife, inclined cut, pneumatically pressed feed roller, outlet with slide (3) Dry Air Dryer E200 with one fully insulated 1000l V2A vessel, drying throughput: 250kg/h, stationary unit, easy clean ...
used
Size: 500 x 750 mm Equipments: Max. pressure: 200 Tons Max. speed: 10.000 sheets / hour Thickness of corrugated paper: 80 g / m² Heating temperature: 0 - 199°C Heating zone: 10 Max. feeding pile height: 1280 mm Die-cutting precision: ±0.1 mm
R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately
used
Manufacturer Battenfeld Type TM 3500-1900 19.500 hour! Control B 2 built 1999 Operating hours h 19500 Closing unit Closing force t 350 Opening path mm 670 holm dimension mm 710 x 710 Installation height min/max mm 300/710 Plate size 1010 x 1010 Injection unit Screw diameter mm 65 spray volume cm3 1078 spray weight gr 981 Spray pressure bar 1777 Dimensions and weights Dimensions LxWxH m 6.9 x 1.8 x 2.1 Machine weight Kg 15500 Other Euromap 12 2 core pull 4 Heating duct controller
used
Suction wall with exhaust air unit, supply air unit, supply air filter, hot water heating register Suction wall: Make : Krautzberger, built 1992 Dimensions: 2.2 x 3.0 x 0.8 m (approx. BxHxT) Fan: 9,240 m3/h suction power, 2 kW Ex Supply air filter, supply fan, WW heater register: Make : Wolf, built 1999 Fan: 10,000 m3/h suction power, 9 kW Heater: 56 kW, 120 degrees C, 3,500 m3/h Pipeline : supply and exhaust air ducts, deflector hood We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.