heating used for sale

Stock# U2408-1 Used stainless steel conical mixer-dryer by Hosokawa Micron type 3-VDC-22. Total volume 798 l, working volume 300 l. Drying chamber is rated full vacuum. Working temperature up to 80 C. Conical bottom is equipped with heating coil with total volume 46 l, designed for work on pressure 6 bar, at working temperature up to 130 C. Elipsoidal top has inspection manway with diameter 250 mm equipped with bolted lid. Top has heating coil with volume 7,4 l, designed for work on pressure 6 bar, and working temperture up to 130 C. Dryer has stainless steel unsupported mixing screw driven via gearbox and el. motor 1.5 kW. Rotating arm is designed in stainless steel and driven via gearbox and el motor 0.25 kW. All motors are in Ex design (EExeIIT4). Bottom central discharge via outlet with diameter 200 mm and pneumatically operated ball valve. Last time machine had been working in ph ...

CLIMAVENETA AWR-MTD2-XE.0031MS Brand:CLIMAVENETA Type:AWR-MTD2-XE.0031MS Stock number:M23-4626 Cooling capacity:9.2 kW Application:Cooling / Heating Number of fans:2 Refrigerant:R410A Refrigerant Content:3,5 kg Voltage:220 Volts Power consumption:5,19 kW Dimensions:900 x 420 x 1240 mm Weight:155 kg Year: New/unused Number in stock:3 piece(s) Price:Quotation request Description: New unused air-cooled Climaveneta water chiller/heat pump with a scroll compressor, water pump and expansion vessel. This machine is equipped with a separate control unit. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Heating: Q= 12,3kW at +40/45°C and +7°C). Visit our website: used-refrigeration

Water tanks, extinguishing water tanks and heating oil tanks USED & REFURBISHED Muensterlandtanks.de Container and tank trade Call us: 0162 1341979 Extinguishing water tank Extinguishing water tank Storage tank Cistern AHL ASL Tank Underground tank Slurry tank Polyester tank GRP tank PE tank Ferric chloride tank Iron III water tank Steel tank Molasses tank By-product tank Oil tank Pressure tank Irrigation Irrigation Riding arena irrigation ebb and flow system Sports field irrigation Diesel tank Fuel oil tank Yard filling station Tank water facility Water tank Service water extinguishing tank Buffer buffer tank Extinguishing water tank Water tank A used heating oil tank according to DIN 6616 in the size of 100,000 litres is offered. Volume: 100,000 Ltr. Material: steel tank tank, material S235JRG2 Tank according to DIN 6616 Tank shape: cylindrical, horizontal, in integra ...

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

Water tanks, extinguishing water tanks and heating oil tanks USED & REFURBISHED Muensterlandtanks.de Container and tank trade Call us: 0162 1341979 Extinguishing water tank Extinguishing water tank Storage tank Cistern AHL ASL Tank Underground tank Slurry tank Polyester tank GRP tank PE tank Ferric chloride tank Iron III water tank Steel tank Molasses tank By-product tank Oil tank Pressure tank Irrigation Irrigation Riding arena irrigation ebb and flow system Sports field irrigation Diesel tank Fuel oil tank Yard filling station Tank water facility Water tank Service water extinguishing tank Buffer buffer tank Extinguishing water tank Water tank A used diesel tank according to DIN 6616 in the size of 13,000 litres is offered. Volume: 13,000 Ltr. Material: steel tank tank, material S235JRG2 Tank according to DIN 6616 Tank shape: cylindrical, horizontal, in integrated she ...

• 120 tons total pressing force • Pressing area 3,000 x 1,350 mm • With patented, thermostable electric heating plates with automatic temperature control system • Connected load of the heating plates with economy circuit 10.6 kW • Connected load of the hydraulics 2.2 kW • in 6-cylinder version Ø 85 mm • Lockable main switch • Push-button control • Stop button • Safety ripcord, safety edge • Timer with automatic opening and acoustic signal • Stroke = opening 400 mm • Infinitely adjustable stroke limitation • 2-stage hydraulics with automatic pressure follow-up • Compact hydraulic power unit mounted maintenance-free in the oil tank • Teflon bronze guides in the cylinders • Hard chrome-plated steel pistons • Heavy rack and pinion compensation for synchronous table movement • fully open on four sides • Economy circuit installed as s ...

Manufacturer: Arburg Type: 470 C 1500 - 350 Year of construction: 2005 Control: Selogica Closing type: Hydraulic Closing force: 1500 kN Tie bar spacing: 470 mm x 470 mm Plate size: 650 mm x 650 mm Tool height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 45 mm Lifting volume: 230 ccm / 210 gram PS Injection pressure: 1670 bar general Engine: 30 kW Heating: 10,2 kW Dimensions: 4.9 m x 1.7 m x 2 m Weight: 4600 kg Screen text: German Optional extras Robot Arburg Multilift + 100mm column extension El. Dosing + LGS 6 heating control points Robot interface Core train x1

clamping force: 2000 kN injection volume: 251 cm³ screw diameter: 40 mm platen size: 1.050 x 900 mm daylight between platens - max.: 880 mm Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Wei ...

Veneer press - School press - Experimental press BÜRKLE U40 built 1979 Ges. Power: 6.25 kW Nominal operating current: 14.5 A Power per heating plate: 2,750 W Plate size: 120 x 80 cm Electric Aluminum Heating Plates max. temperature: 120° C Opening width: 40 cm 4 hydraulic cylinders each with a diameter of 70 mm Nominal surface pressure: 4 kp/cm² max. surface pressure at 75% surface design: 5.5 kp/cm² Operating pressure: 260 bar Circumferential safety ripcord (emergency stop) Automatic opening (automatic opening after the preset time has elapsed) Press frame in dismountable design Weight: 1,350 kg Machine dimensions (approx. dimensions): L 165 cm W 96 cm H 173 cm School machine - The machine comes from a school training center.

Working width: 1400 mm Roller width: 1600 mm pressure: 40 t Pressure line: 250 N / mm Number of rollers: 2 Stück Upper roll: 320 dia Roller covering: Stahl, verchromt Heating - upper roll: Thermoöl Swimming roll - dia: 355 mm Roller covering: Flexroll-Manchon Clouth speed: 30 m/min Weight: 10 to dimensions of the machine ca.: 3,0 x 4,0 x 2,5 m • Inlet side with bearing cap for small skeins, • At outlet with Sochor arm and hydr. center winder, with thermic oil heating, Make: TOOL-TEMP, Switzerland, Type TT-380. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press force max.:: 1.000 kN heating plates:: 500 x 500 mm electrically heated:: °C heating power:: kW piston stroke:: ca. 500 mm no. of stages:: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi-automatic for the production of PET bottles - ZENTRONIK ZR-7 with two forms. The device is used for the production of PET bottles from semi-finished products. 1. Heating furnace for heating PET preforms - 24 kW (dimensions: 1500mmX50mmX1320mm) 2. Semi-automatic PET bottle making machine (dimensions: 1900mmX630mmX1420mm) 3. Bottle mold: single hole mold for 5 liter bottle. ATTENTION! It is possible to convert the machine into a different bottle format for a fee, e.g. a 0.5-liter double-cavity bottle or any other shape and capacity depending on the needs of the buyer. Technical condition: very good as new

S39 - used approx. 60 m³ / 60,000 ltr double-walled steel tank, heating oil tank, water tank, fire fighting tank, water cistern. technical details: capacity: approx. 60 m³ / 60,000 ltr material: steel tank, double-walled, DIN 6616D/6601 manufacturer: Dehoust year of construction: 2007 factory no.: 17/07512 weight: approx. 11 t dimensions: Ø approx. 2.90 m × L approx. 9.52 m × total H approx. 3.30 m Other: Used, in good condition, above-ground storage tank, steel tank on 2 steel bases attached to the tank, former heating oil tank, lid and connections on top of the tank body. The container has been emptied and professionally cleaned inside. According to age, traces of use are present. The container can be used as a storage tank for water and many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your d ...

- Designed to make any type of dough or sauce that requires quick or even cooking, or to work without temperature. - Manufacturer: INHOSPAN - Year: 02/2023 - Capacity: 100 L - Total power: 13.5 kW - Engine power: 1.5 kW - Voltage: 380 / 400 V three-phase - Frequency: 50 Hz - Dimensions (L x W x H): 740 x 1020 x 1730 mm - Variable speed drive - Digital Viewer Description:  - Designed and manufactured for various uses such as the preparation of croquettes, béchamel, sauces, custard, jams, syrups, etc. - Double-bodied stainless steel cauldron, cooking and heating. - Heating by stainless steel shielded electric resistors immersed in thermal oil, allowing uniform and homogeneous cooking. - 3 working positions: preparing-cooking (with the use of shovels), filling or cleaning and emptying (with removal of the shovels). - Stripping scoop with Teflon scrapers, preventing the p ...

Used lab spray dryer Buchi B-290 Power consumption: max. 2900 W Connection voltage: 200 – 230 V ± 10 % Frequency: 50/60 Hz Environmental conditions: for indoor use only Temperature: 5 – 40 °C Altitude: up to 2000 m Humidity: maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C Evaporating capacity: 1.0 l/h H2O, higher for organic solvents Airflow: max. of 35 m3/h Motor control: Frequency converter Max. temperature input: 220 °C Heating capacity: 2300 W Heating control: PT-100, fuzzy logic, control accuracy ± 2 °C Interface: Serial port RS-232 for all parameters Spray gas: Compressed air or nitrogen / 200 – 800 l/h, 5 – 8 bar Nozzle tip diameter: 0.7 mm standard, other sizes 1.4 and 2.0 mm available Possible particle diameter range: 1 – 25 µm Mean residence time: 1.0 – 1.5 sec. Pollution deg ...

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

MOSCA RO-TR-P-5 Strapping Machine A fully automatic MOSCA strapping machine type RO-TR-P-5. The machine is in very good condition. The original price was about 18,500 € Technical details: Heating wedge welding system with electronic heating regulation Fully automatic belt threading Drive of the unit in DC technology with wear-free direct drives Tape End Query with Tape Jam Throw Automatic belt ring ejection in case of incorrect triggering Belt coil quick-change system Wear-free, force-controlled belt guidance Integration into any processing line possible Hinged transport systems with frequency control PLC control Control panel for setting the operating modes, switching distances, strip tension Potential-free contacts to upstream and downstream systems Automatic PP straps width 5,6,7,8,9 or 12mm Data sheet & machine map under these links

1 Loos steam boiler Type AW1-1 No. 53658/1 Capacity 10 to steam with 20 bar Up to 235 °C, 385 kW Year of construction 1991 With Weißhaupt burner machine with EL heating oil and gas firing Type RGL 70/1 A, Catergorie J Fabr. No. 3626804 Year of construction 1991 1 Loos steam boiler Type AW1-1 No. 53658/1 Power 10 to steam with 20 bar Up to 235°C, 385 kW Year of construction 1991 With white head burner machine with EL heating oil and gas firing Type RGL 70/1 A, category J No. 3626804 Year of construction 1991

Grease melting tank, double-walled stirring tank, rühwerk tank, coolable, heated used Manufacturer: KLARMANN Edelstahverarbeitung Type: Fat melting tank Year of construction 2017 Stainless steel 1.4404 / 1.4301 Total volume: 610 liters Working volume: 500 liters Diameter inside / outside approx. 1000 / 1100 mm Design temperature product rough/jacket space: 100/150°C Operating temperature: Product room: 90°C Design pressure jacket space: 5 bar Heating/cooling surface: bottom and 2/3 of the frame designed as templates Outlet height approx. 800 mm Calculated melting capacity for butter 20 - 30 min for 300 kg of block goods, depending on the output temp. and product size Compact agitator Planetroll 0.37 kW 77 rpm 400 V IP55 Dimensions approx. 1165 x 1165 x 2260 mm Original price approx. 18000,- € The staircase is not included The plant comes from a plant  ...

Hongming HM-ZD6418E Automatix Rigid Box Making Line (Box erecting and enrobing machine) Age: 2017 The Automatic Rigid Box Making Line is suitable to make various Paper covered rigid cardboard premium boxes, such as shoe boxes, mobile phone boxes, wine boxes, etc. The wrapped box's max height is 130mm, with max folding-in depth of 100mm. Features: 1. Suit to all kinds of rigid boxes in mass production 2. Parameter adopts computer digital setting 3. Auto error stop and display 4. Automatic feeder for Cover paper and cardboard 5. 24-hours control for glue pre-heating 6. Wrapper can input 300 product formulas 7. Corner pasting part with independent man-machine control and heating system 8. Adopt YASKAWA servo control system 9. Spotter by electric eye tracing system and hydraulic pneumatic rectifying system to spot correctly (spotting accuracy ±0.2mm) 10. Wrapper can au ...

Over-drawing machine Model: IKM 220 with chocolate wheel for pastries of any kind and cakes up to a height of 10 cm Lattice band width 220 mm Capacity approx. 20 kg chocolate Belt speed infinitely adjustable Floor tuners, blowers and vibrators Run-out belt with paper roll Machine mobile Additional heating, veil box Heating oven for 1 heated tub below ( max. 30 kg ) Working direction from right to left Stainless steel Connection 220 V / 1.7 kW Used machine cleaned and tested

Cream cooker CM 120 Rational work in cooking and heating creams and masses Accurate temperature control 2 performance levels Digital timer Boiler filling 120 liters Mass 12 min - 78 max. liters filling quantity Stainless steel Hand crank for tilting Thermal oil boiler heating Machine mobile with locking plate DGUV V3 tested Connection 400V, 15 kW, 32A-CEE plug Dimensions 1200 x 1000 x 1800 mm, WxDxH NEW Machine with 12 months warranty Option: - Drain tap

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heating elements / heating rods NEW( 4 pieces )for quail piccoloPower: 320 WSeating: 230 Vgestr. Length: 1540 mmof which unheated: 2 x 175 mmPipe diameter: 8.5 mmPipe sheath material: 1.4571 / AISI 316 TiConnection: M4 threadClosure: siliconeMarking: green insulating beadsRHK curved: U-shape, center-center 45 mmin stainless steel sheet 95x25x3 mm soldered in 

Farm Dairy Milk and Cream Pasteur Machines were completely overhauled in 2015 and are in very good condition. Included. - Milk pasteurizer GEA 1000 liters/h (continuous pasteurizer 93% heat recovery) incl. pumps, control, Temperature Recording - Homogenizer Spomaz 1000 liters/h - Seithal centrifuge 1000 litres/h - 2x Coolable buffer tanks (whole milk, low-fat milk) - Cream / yoghurt pasteurizer GEA 300 litres/h (continuous pasteurizer) with Electric heating incl. pump control Temperature recording - Homogenizer Spomaz 300 liters/h - Buffer tank 600 liters - 2x yoghurt tank 600 litre double jacket heating and cooling bar - Manual CIP basin - Siemens S7 for controlling the dairy. - various coupling panels, butterfly valves, leakage disc valves, Pipelines, etc... - Large cooling unit for cooling the pasteurizer and storage tank - 3000 litre cooling water  ...

Used twin-screw, parallel, counter-rotating extruder by Amut model BA92 NOMAX. New 2011. Output: 270 - 370 kg/h Hours of operation: 53638 h Other details: - Diameter of augers 92 mm - L/D ratio 28:1 - Drive power 60 kW (400V, 50 Hz, 3 ph) AC - Two sets of screws -for ABS processing -for PVC processing - Number of cylinder heating zones 7 - Number of cylinder cooling zones (air) 4 - Number of heating zones for head and adaptor 5 + 1 - Built-in pressure and temperature measurement system for plastic mass - Thermal oil unit for thermostating the worms for PVC - Drive power of vacuum degassing pump 11 kW - Drive power of screw feeder 1.5 kW - Without control (subassemblies available according to the list)

MANUFACTURER: Niro Atomizer CAPACITY: 1.183 Kg/h, , APPLICATION: Milk powder and whey powder production. MACHINE COMES WITH: External vibro fluid bed dryer, Niro F35 atomizer, powder cyclones, bag filters, air pre heating economizer unit, air heating unit with steam heat exchangers, vibro sieve powder calibration unit, air ventilators, air locks, rotary valves and many accesories...

Stainless steel defrost trolley BRÖKELMANN FS5130AB-GLY Specifications: 230V / 50 Hz / 3kW Content: 600 L indirect heating, regulated up to 60°C Safety shutdown at 80°C# Heating medium: Glycerin 60L glycerin filling (new) Total dimensions: H95 x W79 x D148 cm Dimensions tub: H67,5 x W73 x D133 cm mobile, with 2 pulleys & 2 fixed castors with push handle Year of construction: 2016 Function tested, device ready for use Condition see original pictures! If you have any questions, call or email.

Spine heating plate Schmedt PräPara; good condition; cleaned and tested; Max. Book height 640mm; Max. Block thickness 110mm; Adjustable inclination. Book cover heating plate Schmedt PräPara; good condition; cleaned and chekced; max.book hight 640mm; max.block thikness 110mm; adjustable in tilt.

Dürr Ecoclean 79W KVI parts washer The Dürr Ecoclean KVI system enables the cleaning of a wide variety of workpieces, both in the injection/flood cleaning process and for a limited period of time in the spraying process. The KVI cleaning system is characterized by a modular design. This means that a maximum of three systems can be connected in series with this type of cleaning system. The control as well as the data entry is done via the control panel of the 1st module, the other two modules can be controlled from there. The main advantage of this modular technology is that different treatment media can be used and thus almost all surface treatments / cleanings can be carried out. Compared to conventional cleaning methods, the Dürr Ecolean KVI system achieves very good cleaning results, especially for bulk materials, workpieces with hollows, threaded holes, blind ho ...

THERMISCHE REINIGUNG PYROLYSE-OFEN Zykluszeit : 2 - 4 Stunden Beschickung : Wagen, manuelle Beschickung Isolierung : Keramikwolle + Steinwolle Dicke der Isolierung : 175 mm Höchsttemperatur : 1.260˚C Heizungsart : Direkt beheizt Heizquelle: Erdgas, Flüssiggas oder Diesel Brennkammern : 2 Sätze Überhitzungskontrolle : Wassersprühdüsen - 2 Stück Sicherheitskontrolle : Wassersprühdüsen - 2 Stück Backofen-Sicherheitstür : 1 Satz Schaltschrank : PLC-gesteuert, Schaltgeräte der Marke Schneider Electric Steuerungssystem : Bedienfeld mit Touchscreen und Softwaresystem MATERIAL Ofengehäuse : Stahlkonstruktion und Blech, spritzlackiert 1. Brennkammer: Schamottestein und feuerfester Zement, 1.400˚C 2. Brennkammer: Schamottestein und feuerfester Zement, 1.260˚C BETRIEBSTEMPERATUR 1. Brennkammer: 250 - 600˚C 2. Brennkammer: 800 - 1.100˚C Durchmesser  ...

3300pcs Brugman Lot Radiators We are pleased to offer you an impressive large batch of high-quality radiators from the renowned manufacturer Brugman. This unique deal includes a total of 3300 radiators and corresponds to a volume of about 7 trucks Features: Manufacturer: Brugman, known for quality and innovation in heating technology. Quantity: 3300 radiators in the large batch. Weight approx.: 110 tons Efficiency: Brugman radiators not only provide first-class heat, but also stand out for their energy efficiency. Design: Modern and timeless design, suitable for any interior. Material: High-quality materials ensure durability and reliability. Application: Suitable for a wide range of spaces, from apartments to commercial buildings. Advantages of purchasing: 1.Large volume, small price: By buying in this quantity, you are getting unbeatable value for money. 2.Top br ...

Coffee-tech FZ94 Manufactured in 2020, delivered in 2021 In perfect condition. 230V 50/60 Hz Electricity 3 independent heating elements for a total of 3600W Adjustable airflow and drum rotation speed Fast cooling Low electricity consumption Possibilities with Artisan and Cropster softwares : - Roasting curves logging (3 probes) - Airflow and drum rotation speed control - Automatic heating shutdown at the set temperature - Semi-automatic curve replication Shipping possible with extra-cost. Also available for sale: various Coffee-Tech Solar and Avirnaki

clamping force: 250 kN injection volume: 49 cm³ screw diameter: 25 mm platen size: 300 x 300 mm Condition: used, specification: C-frame injection moulding machine - used clamping unit: - clamping force: 250 kN - heating platen size: 300 x 300 mm - clamping/opening stroke: 330 mm - Closing direction: from below - Lateral ejector: yes - Ejector stroke/force: 115 mm / 12 kN Injection unit: - Injection volume max.: 49 cm³ - Screw diameter: 25 mm - Screw length: 16 - Screw speed max.: 250 rpm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE - Connected load: 55 kW/92 A - Weight approx.: 3,500 kg Various accessories are also available: - Injection unit (25 screw) - 2 heating plates - Funnel and various small parts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A glass bottle fruit juice hot filling line with bottles cooling tunnel Capacity: 5,000 units (1.0 and 0.75l), built between 1994 and 2014 Box line, equipped with K 1; Dirt box task on transport system, done manually K2; Bottles lid screwdriving system from Fa. Elektro Maschinenbau Rink GmbH, Type: KM 740/7K , Fabr. No 07/1813/93 Year of construction 1993 4 boxes of 6 bottles each are made at the same time the lids autom. unscrewed and put into a Containers disposed of. K3; Kettner bottle unpacking line Comm. No. 93/0604/083, Type: R09 JUN 9, Year of construction 1993 12 tulips per row x 3 are simultaneously lifted out of the box and onto a bottle tasktable with 15 V2A chain belts. K4; Box washing and turning system Enema at the bottom, outlet of the box at the top Manufacturer Fa.. Klotzki Maschinenbau, Type: Reversible wheel washer, year ...

ECOTEQ HQ-38 Brand:ECOTEQ Type:HQ-38 Stock number:M22-4559 Cooling capacity:26.8 kW Application:Cooling/Heating Number of fans:1 Voltage:400 Volts Power consumption:10,7 kW Dimensions:1030 x 953 x 1003 mm Weight:310 kg Year:2015 Number in stock:3 piece(s) Price:Quotation request Description: Air-cooled Ecoteq water chiller/heat pump with 1 scroll compressor and coated fins. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Heating: Q1= 38.01kW at Tw= +35/40°C and Tamb= +7°C), (Q2= 36.33kW at Tw= +45/40°C and Tamb= +7°C) Please visit also our website: used-refrigeration

ARBURG ALLROUNDER 221 K5 350-100 (2002) Injection molding machine Closing force: 350kN Opening stroke: 200 mm. Mold mounting height: 150-300 mm. Distance between columns: 350-500 mm. Mold clamping plates: 221 mm. Mold diameter: 342 x 250 mm. Weight of the mit. Mobile of the mold: 75 kg. Ejector force: 24 kN Ejector stroke: 60 mm. Pump motor: 7.5 kW Dry running time: 14.1s Screw diameter: 25 mm. Screw length L/D: 20 mm. Screw stroke: 100mm. Injection volume: 49 cm3 Injected part weight: 41 g/PS Injection pressure: 2000 bar. Injection flow: 54 cm3/s Spindle tangential speed: 29 m/min. Spindle torque: 300 Nozzle support force: 50 kN Nozzle separation stroke: 180 mm. Nozzle cylinder heating: 1600 +3 x 900 kW Oil tank: 50 l. Voltage: 50Hz Heating: 4.6 kW Total connection: 12.1 kW Weight: 1260kg.

Key data: 800 mm, 1400 , 2700

in stock, as good as new, with 12 months warranty -max. temperature 800 °C -Application temperature 750 °C -Heating time from 15 °C to 700 °C approx. 3-5 hours -Insert mass complete 2600 kg -Connected load heating 4 x 47.25 kW = 189 kW -2 compact fans -Furnace circulation capacity approx. 3,000 x per hour -Control zones 4 pieces -Program control IMAGO 500 -Touch panel TP 700 Color -Overtemperature controller -Thermocouple regulator 4 x NiCr/Ni type K; Class 1 -Thermocouple overtemperature 2 x NiCr/Ni type K; Class 1 Furnace volume 6.0 m³ Internal dimensions: Width (clear) approx. 1400 mm Depth (clearance) approx. 2700 mm Height (clearance) approx. 1600 mm Height of furnace base approx. 585 mm External dimensions: Width (without switchgear) 2300 mm plus switchgear approx. 500 mm Depth 3300 mm Height (with lifting door) 4200 mm (transport height 3100 mm)  ...

- Output: max. 5500 l/h - Pasteurisation temperature: adjustable up to 96°C - Outlet temperature: + 5°C - Heating liquid: hot water - Heating liquid temperature: 125°C - Cooling liquid: glycol water - Cooling liquid temperature: approx. -3°C

machine measurements: Länge ca. 12.000 mm machine weight: -- kg power capacity: 170 kW Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7 Relocation date no later than mid-June 2022. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: Länge ca. 12.000 mm machine weight: -- kg power capacity: 182 kW Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7 Relocation date no later than mid-June 2022. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Process chiller / chiller air-cooled, Type: Aries TECH AST2 190 HE-MWT (Special) M.T.A. S.p.A. The Aries TECH AST2 190 HE-MWT are compact chilled water chillers suitable for outdoor installation (from -20°C to +48°C) with shell-and-tube evaporator, six scroll compressors, compressor shut-off valves, crank pan heating, phase monitoring, P3 double pump, tank 800 litres, electric antifreeze heating, EC fans, condenser filter and control and switch cabinet. Cold water outlet temperatures from -10°C to +20°C can be adjusted. Cooling capacity (kW): 539 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 92.1 Available. Pump pressure (bar): 3.4 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Number of refrigeration circuits: 2 Total number of compressors: 6 Power levels (levels): 6 Electrical data: Voltage V 400, Frequency 50 ...

Process chiller / chiller air-cooled, Type: Aries TECH AST2 190 HE-MWT (Special) M.T.A. S.p.A. The Aries TECH AST2 190 HE-MWT are compact chilled water chillers suitable for outdoor installation (from -20°C to +48°C) with shell-and-tube evaporator, six scroll compressors, compressor shut-off valves, crank pan heating, phase monitoring, P3 double pump, tank 800 litres, electric antifreeze heating, EC fans, condenser filter and control and switch cabinet. Cold water outlet temperatures from -10°C to +20°C can be adjusted. Cooling capacity (kW): 539 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 92.1 Available. Pump pressure (bar): 3.4 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Number of refrigeration circuits: 2 Total number of compressors: 6 Power levels (levels): 6 Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max ...

Ochsner Edge Gilding Machine, For Semi-Automatic Edge Gilding of a Veriety of Books, Hand Feeding Area for End Boards and Book Blocks, 4 Sanding Stations, 1st Cross Sanding Station with 100 Grade Sanding Belt, 2nd Linear Sanding Station with 180 Grade Sanding Belt, 3rd Linear Sanding Station with 240 Grade Sanding Belt, 4th Linear Sanding Station with 320 Grade Sanding Belt, Brushing Station, Dust Bag Extraction Unit, Pre-Heating of Book Blocks, Gild Foil Application with 2 Rollers, Electrical and Mechanical Guarding, Main Control Panel with Timer For Pre-Heating, Foil Cutter, Return Conveyor, Format: Book Size: Max. Any Standard Book Sizee Plus Larger Formats, Min. 68x102mm, Production: at Block Thickness of 75mm ca. 50 Blocks/Hour, Pocket Diary Size: 25 Blocks/Hour Desk Diary Size

MAN TGX 26.480 6x2 Mileage: 712545km Engine/Assistance Systems -D2676LF45 - 480 hp / 353 KW EURO6 SCR-2300Nm(2500 with TopTorque) C-R New -Electronic speed limiter 89 km/h + 1km/h Cruise Control Tolerance -Low noise certificate for Austria and L- sign • COP document • Exhaust gas confirmation Euronorm • CEMT certificate • National approval documentation Germany noise measure 80 dB (92/97EEC) -Fuel filter -Start-up aid -HA Air -HA differential lock -Fuel tank aluminium 800l right and 60l AdBlue • Fuel tank attachment • Lockable tank cap • 1 pc. ventilated for Simultaneous locking - AdBlue tank cap lockable 1 piece -MAN BrakeMatic (electronic braking system) -Emergency Brake Assist 2 (EBA2) -Anti-lock braking system (ABS) -Traction Control (ASR) -Electronic Stability Program (ESP) -Gearshift MAN ComfortShift -Transmission ZF 16 S 23 ...

PONAR ŻYWIEC UT 090 H injection moulding machine was built in Poland in 2007. The machine is used in processing thermoplastics using the injection moulding method. The hydraulic mould closing unit, operating with a closing force of 90 tons, is protected with significantly offset fixed and movable covers facilitating the installation of complex moulds with their accessories. The mounted moulds can be a minimum of 225 mm high, while the mould clamping plates have dimensions (L x W) of 615 x 615 mm. A MOOG-BUHL CNC control unit enables the machine to operate in any desired manual or automatic mode, as well as setting and monitoring the injection process parameters. The screw of the machine with a diameter of 30 mm rotates at a speed in the range of 10 to 380 rpm. The equipment of the machine for plastic injection moulding includes, among others, a plastic feeder and a crane with a multi ...

PONAR ŻYWIEC UT-025 H injection moulding machine built in Poland in 2005, is used in the process of processing thermoplastics by injection moulding. The characteristic feature of the machine is a two-plate hydraulic mould closing system with attached closing cylinders, working with a force of 25 tons. The machine’s screw with 22 mm in diameter rotates at a speed from 10 to 370 rpm and is driven directly by a hydraulic motor. The high-tech control system of the MITSUBISHI FX2N-48MT-ESS/UL allows for high automation of the injection process with setting and control of the injection parameters from the control panel located on the body of the machine. The injection moulding machine is offered with a wide range of equipment, including a plastic feeder and a MITSUBISHI E600 HMI panel. Total weight of the machine is 1470 kg. Characteristics of PONAR ŻYWIEC UT-025 H injection moulding ...

SANDRETTO MEGA T 4435/610 injection moulding machine (1998) 610 ton thermoplastic injection machine In working condition. Euromap 4435/610 Screw diameter: 21 Calculated injection volume: 2831cm3 Screw length (LD): 21 Maximum injection capacity: 746 cm3/1” Laminating capacity: 86 g/1” Pressure on material: 1548 bar Closing force: 610 tons. Variable displacement engine torque: 5570 Nm. Screw speed: 153 RPM Screw hydraulic motor power: 120 HP Injection group stroke: 725 mm. Heating zones: 4+nozzle. Total heating power: 38 kW. Mold locking force: 5985 kN Mold thickness min/max.: 300/1000 mm. Mobile plane stroke: 930 mm. Plate dimensions: 1270 x 1270 mm. Column passage: 850 x 850 mm. Column diameter: 160 mm. Extraction force: 103 kN Puller stroke: 350 Vacuum cycles: 10-11 n/1” Hydraulic circuit pressure: 160 bar Oil tank capacity: 850 l. Electric motor powe ...

Heat pump / chiller - switchable - water / water cooled, Type: OCEAN Tech HOCT 200 MTA S.p.A. OCEAN Tech HOCT 200 are water-cooled heat pump / chiller for indoor installation without hydraulic circuit (pump, accumulator) incl. crank pan heating, phase monitoring. An external dry cooler unit is not included in the offer. Cooling capacity kW 53.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.25 Cooling water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 13.5 Heating capacity kW 67.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.51 Cooling water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 11.7 Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 24 Max. current (A) 40 Starting current circuit (A) 162 Protection class: IP22 Dimensions: Length mm 1735, Width mm 660, Height mm 120 ...