heating exchanger used for sale

Kroll heating mobile as hall heating, years of construction 194/95, see picture type plate

Working surface: 2150x1150mm, pressing height: 300mm, pressing force: 50t, connected load: 2.4kW, length: 2500mm, width: 1150mm, weight: 1.8t.

Suitable for processing door seals, control: SIEMENS SIMATIC, with documentation, an on-site inspection is possible.

Heating oil tank - tank system - steel tank - diesel storage brand new - 100m³ capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 7011 iron grey. (Other RAL colours are also possible on request!) L = approx. 15.80 m - D = 2.90 m - weight approx. 19.0 to. - ex works, freely charged - (For transport reasons, dome covers an ...

There are two identical Viessmann Paromat-ER-ND available, nominal oil/gas output: 460kW, max. rated power input: 1000W, were maintained regularly.

Nominal heating power: 80kW, length: 710mm, width: 1805mm, height: 1072mm.

Heraeus V?tsch Climatic chamber VTRK 500. Inner dimensions 745 x 880 x 765mm. Capacity 500L. Door with porthole 350 x 350 / wipers Temperature 10-90?C. Fridge unit in the lower part, under the enclosure Space for storage tank approx. 10l of distilled water. Electrical power 3.1 kW / mono 220 V Overall dimensions: 1100 X 1400 X 2100

Immediately available, 40,000 litres Above-ground, double-walled tank diameter 2,500 mm Length approx. 8,000 mm approved for heating oil and diesel Year of construction 1990 with test certificate Tank can be prepared/painted Otherwise immediately available, with common equipment

Carel HeaterSteam UR020HL10S isothermal Steam Humidifier Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be normal tap water or completely demineralized water. The heat generated by the heating elements heats the water up to a temperature of 100 °C. Specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Vapour pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4"G outside More items - new and used - can be found in our shop! International shipping costs on request!

WARTSILA 32 FUEL OIL PART NO: 473200, BERGEN BRM LUBE OIL: 022899 BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Belu Type 8 Gastro Heating Cabinet Plate Warmer High storage capacity due to an intermediate floor Space-saving thanks to two high-quality stainless steel sliding doors with indicator lights On/off switch and temperature controller Worktop heated Cabinet heated left and right made of robust stainless steel with backsplash 50 mm Height: 830 mm Depth: 800 mm Width: 2000 mm More items - new and used - can be found in our shop! International shipping costs on request!

max. temperature: 300 Grad size of opening: . mm depth of chamber: 750 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 1200x750x1620 m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tank-& Umweltschutz Wozniack Fachbetrieb nach Wasserhaushaltsgesetz Delivery time immediately Dear Sir or Madam, we offer a 10,000 liter double-walled storage tank for the storage of diesel. Heating oil or other hazardous substances as follows. Nominal capacity 10 cbm according to EN 12285-2 standard Piece 1. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to EN 12285-2 standard and type plate Piece. 1 dipstick Piece. 1 vent nozzle Piece. 1 filler neck Piece. 1 new limit value transmitter Piece. 1 new leak detector with filled leakage liquid Piece. 1 ladder Piece. 1 removal sleeve Form. cylindrical storage tank with feet/bracket Container dimensions length approx. 5,300 mm Diameter approx. 1,600 mm Weight approx. 1.800 kg Storage above ground Top on offer . Liquid ferti ...

Tank-& Umweltschutz Wozniack Fachbetrieb nach Wasserhaushaltsgesetz Delivery time immediately Dear Sir or Madam, we offer a 50,000 liter double-walled storage tank for the storage of diesel. Heating oil or other hazardous substances as follows. Nominal capacity 50 cbm Piece 1 Bring in colour wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's certificate/test certificate according to EN 12285-2 standard and type plate Piece. 1 dipstick Piece. 1 vent nozzle Piece. 1 filler neck Piece. 1 new limit value transmitter Piece. 1 new leak detector with filled leakage liquid Piece. 1 ladder Piece. 1 removal sleeve Form. cylindrical storage tank with feet/bracket Container dimensions length approx. 10900 mm Diameter approx. 2,500 mm Weight approx. 9000 kg Storage above ground Top on offer . Liquid fertilizer -  ...

Istz an air conditioning / heater, functional but unfortunately the electronics is defective! Either as a spare parts dispenser or repair electronics.

Fuel: Natural gas Manafacture: Remko Type: VRS170 Heating power: 198 kW Air mass flow: 12,000 m³/h Mains gas pressure: 2.6 bar

Fuel: Natural gas Manafacture: Remko Type: VRS170 Heating power: 198 kW Air mass flow: 12,000 m³/h Mains gas pressure: 2.6 bar

HOT AIR GENERATOR model FABBRI F240 second hand machine with n.01 additional fan for fumes expulsion with piping for hot air conveyance CE marks: Yes volt. 380 / 50 APPROXIMATE SURFACE TO HEAT UP: m² 1.000 main fan electrical motor power Hp 4 additional smoke expulsion fan motor power Hp 0,75 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law. Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by on ...

Wood chip heating system with 700 kw heat output only been in operation for 2 years Unfortunately, the fireclay was broken during dismantling

DHE DEN HOLLANDER ENGINEERING: Used direct heating system for milk, cream, liquid egg, ice cream mix, etc. by DHE Equipment for the production of milk with a longer shelf life using the gentle process The product is heated to 65°C in counterflow, heated to 130°C by steam injection in less than 1 second and then cooled down again in a very short time by evacuation. Further cooling is carried out by the incoming product in counterflow and ice water. Extraordinarily gentle on the product process - closed supply tank - speed-controlled pumps - Homogenizing machine -Heater - Infusion container - Relaxation tank - Load steam condenser -Piping - Fittings and control cabinet - Measuring, regulating, controlling, recording and safety equipment - Connections for: steam, water, electricity, etc. - All system components mounted on a base frame in floor construction and mounted in containers Ca ...

Heating cabinet Manufacturer: Memmert Type: UM 500 Properties: Electric heating, max. temperature: 220°C Electrical power: 2000 watts, at 230 volts - 50 Hz

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -electrically heated -7x heating rods a 800 WATT -reconditioned by FavFE-MA-TECH -2x glue basins available -Price: per piece -Dimensions: 190/100/H125 mm -Weight: 3 kg/piece

Heating hose, glue melter, glue machine, hot glue machine, industrial hot glue gun -Type: FE-NW-2.4-8-N10 -Connection: 230 V 50 Hz 310 W -Heating power: 200 °C -Weight: 2.5 kg

Heating hose, glue melter, glue machine, hot glue machine, industrial hot glue gun -Type: FE-N-2.4-8-1U120 -Connection: 230 V 50 Hz 320 W -Heating power: 200 °C -Weight: 2.5 kg

Heating hose, glue melter, glue machine, hot glue machine, industrial hot glue gun -Type: S/N TA06M00018 -Connection: 240 V 224 W -Max. Pressure: 1500 PSI -Weight: 2.5 kg

Heating hose, glue melter, glue machine, hot glue machine, industrial hot glue gun -Type: FE-H/PN2-1.8-13-PT100 -Connection: 230 V 50 Hz 320 W -Heating power: 200 °C -Total length: 2000 mm -Weight: 3 kg

Cartridge heater 220V 200W D=40 3m Connection

Parking heater EBERSPÄCHER X 2/1 ( X2/1 ) Power: 40 W Voltage: 24 V Heat flux: 2000W fuel: DK heating oil EL New ! Dimensions: 400 x 270 x 130 mm

Heating module, liquid heater HELIOS 05080001 2,000 W 230 V Dimensions: 920 x 580 x 85 mm

Heating controller KIEBACK & PETER KWH-A 24 V ( 24V ) ambient temperature: 0...50°C New ! Dimensions: 150 x 135 x 100 mm

Heating rod, cartridge heater EAW 900 W ( 900W ) TGL DDR 5.88 2524.6-1142.00 220 V AC Heating rod length (straight): 2650 mm Heating rod cross-section: 6 x 12 mm approx. 3.5 m connecting cable New ! General cargo shipping ! Dimensions: 2700 x 350 x 30 mm

Heating pump, chemical pump KSB RIOTHERM-C 25-20 D S15 50 Hz 3x400 V Motor: 72 W New !

Heating pump, chemical pump KSB RIOVAR 84-48D 380 V Engine: 0.71 kW New ! Dimensions 45 x 36 x 40 cm

Heating register, spiral radiator PAGUS PC 004 402 800249.2 1,65 kW 115 V 2 heating coils Ø 48 mm x 295 mm on mounting plate 323 x 145 mm connection head Ø 70 mm x 122 mm thread: M54 x 1.5, Length: 45 mm Material: Stainless steel New ! Dimensions: 325 x 145 x 270 mm

Heating register, spiral radiator PAGUS PC 004 399-U Article no.: 80000249.2 800249.2 1,65 kW 115 V 2 heating coils Ø 48 mm x 295 mm on mounting plate 323 x 145 mm connection head Ø 70 mm x 122 mm thread: M54 x 1.5, Length: 45 mm Material: Stainless steel New ! Dimensions: 325 x 250 x 250 mm

Heating register, spiral radiator PAGUS PC 004 395-U Article no.: 80000248.2 800248.2 1,65 kW 115 V 2 heating coils Ø 48 mm x 280 / 330 mm on mounting plate 380 x 145 mm connection head Ø 70 mm x 122 mm thread: M54 x 1.5, Length: 45 mm Material: Stainless steel New ! Dimensions: 380 x 240 x 250 mm

Heating module GEBHARD 211251 5000 W 240 V unused ! Dimensions: 1200 x 70 x 70 mm

Heating hose SCA SCHUCKER DN25-2,2-WE-1,1 04330728 A 660 W 230 V 360 bar 100 °C New ! Dimensions: 2150 x 90 x 75 mm

Heating register, flange radiator PAGUS 2 x 25 kW ( 2x25kW ) 2 x 9 heating elements TR1AS 2777 W 400 V (230 V) Flange: 560 x 150 mm New Dimensions: 800 x 560 x 150 mm

Heating pump, circulating pump, energy-saving pump WILO Stratos MAXO 40/0,5-8(DE) 2186199/19w39 PN 6 / 10 DN 40 Flange diameter: Ø 140 mm Mounting length: 220 mm Tmax.: 110°C Engine: 0,0,007 - 0,28 kW 230 V 1AC 50 / 60 Hz IPX4D New, with documents ! Dimensions (pump): 220 x 220 x 380 mm

Heating pump, circulating pump, energy-saving pump WILO Stratos65/1-12(DE) 2095506/13w31 PN 6 / 10 DN 65 Flange diameter: Ø 185 mm installation length: 340 mm Tmax.: 110°C engine: 0,038 - 0,0,038 - 0,0,038 - 0,0,0 8 kW 230 V 1AC 50 / 60 Hz IPX4D New, with documents ! Dimensions ( pump ): 340 x 330 x 430 mm Dimensions ( packaging ): 520 x 400 x 400 mm

Heating pump, chemical pump KSB RIOTEC 40-1/ 10 ID number: 29 130 101 PN 10 < br />DN 40 installation length: 340 mm Flange diameter: Ø 90 / 150 mm bolt circle diameter: Ø 110 mm 4x bore: Ø 17,4x 5 mm motor: 0.1 - 0.55 kW 950 - 2750 rpm 230 - 240 V 1AC 50 Hz with integrated frequency converter for infinitely variable differential pressure control New ! Dimensions: 310 x 175 x 390 mm

heating pump, circulating pump, hot water pump, in-line pump, water pump, centrifugal pump, chemical pump SALMSON LRL205-11/0,75 30924988 C max. 10 bar T max: 110° C motor: 0.75 kW 220 / 380 V Flange: 165 mm 280 x 215 x 430 mm

Heating pump, chemical pump KSB RIO 40-100 D ID number: 29 130 110 PN 6 DN 40 installation length: 250 mm Flange diameter: Ø 132 mm Tmax.: 130°C motor: 0,0,36 / 0.45 / 0.58 kW 230 / 400 V 3AC 50 Hz IP43 New ! Dimensions: 250 x 240 x 280 mm

Heizungspumpe, Chemiepumpe KSB RIOVAR 42-7 D ID-Nr.: 502 001 792 PN 10 DN 40 Einbaulänge: 220 mm Flanschdurchmesser: Ø 150/90 mm Lochabstand: Mitte/Mitte 80mm Loch: 18mm Motor: 0,1 / 0,12 / 0,65 / 0,205 kW 380 V 3AC 50 Hz Neu ! Abmessungen: 220 x 175 x 265 mm

Heating pump, chemical pump KSB RIO 25-7 D ID number: 29 130 138 PN 6/10 Connections: Rp 1 installation length: 180 mm Tmax.: 130°C motor: 0,,09 / 0,13 / 0,185 kW 230 / 400 V 3AC 50 Hz IP43 New ! Dimensions: 180 x 160 x 215 mm

Heating pump, chemical pump KSB RIO-C 30-25 ID number: 40 982 513 PN 10 connections: Rp 1 1/4 installation length: 180 mm engine: 0,,018 / 0.031 / 0.0.048 kW 230 V 1AC 50 Hz IP43 New ! Dimensions: 180 x 100 x 130 mm

Heating pump, chemical pump KSB RIOVAR 22-7 D ID number: 502 001 196 PN 6/10 Connections: Rp 1 installation length: 180 mm Engine: 0,,105 / 0.14 / 0.18 / 0.23 kW 380 V 3AC 50 Hz New ! Dimensions: 180 x 160 x 210 mm

Heating pump, circulating pump, energy-saving pump WILO Stratos30/1-6(DE) 2095495/12w34 PN 10 Connections: G 2 installation length: 180 mm Tmax.: 110°C engine: 0,0,009 - 0,085 kW 230 V 1AC 50 / 60 Hz IPX4D New ! 210 x 180 x 240 mm