heating exchanger used for sale

Manufacturer: Vulcanic Model: Vulcatherm Catalogue number : 829721-01 Type: Temperature control unit Weight : 210 kg Max. pressure : 10 bar G Max. temperature : 90 ?C Thermal fluid : water

Manufacturer: Vulcanic Model: Vulcatherm Type: Temperature controller Date: September 2000 (left machine) and December 2003 (right machine) Power : 20 KW Weight: 140 kg Max. pressure : 12 bar G Max. temperature : 140 ?C Thermal fluid: water Management system type 20789 V2, installed in 2015 by the manufacturer.

Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20?C / +230?C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Sold with protective cover.

Description: 4 air/water heat exchangers 5000W Comfort Mounting type: wall-mounted Operating voltage: 230 V 50/60 Hz Useful cooling capacity L35W10 400l/h: 5000 W Approx. Onsite Dimension. (l x w x h): 450 x 220 x 1,400 mm, weight approx.: 40 kg

General SKU279M283 LocationBarneveld Makeonbekend, typeplaat ontbreekt Material Shell materialStainless steel Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface11.3 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface11,3 m2 Tube capacity±42 Ltr. U-typecheck Number of tubes:178 Tube diameter15mm Tube length1350mm Shell diameter325mm Shell length1450mm Shell connections1x dia. 65mm, 1x dia. 110mm, 1x dia. 45mm Cover connections2x dia. 60mm Information Floorspace2,0x0,65 M Total height0,65 M Weight250 KGShell and tube heat exchangers-Heat exchangers > Shell and tube heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU050C389 LocationBarneveld Makeunknown, manufacturer tag is missing Material Shell materialStainless steel 1.4401 (316) Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface1.5 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface± 1,5 m2 Number of tubes:25 Tube diameter24mm Tube length± 900mm Information Floorspace2,2x0,7 MShell and tube heat exchangers-Heat exchangers > Shell and tube heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

- Heat Exchanger Assy - HP Part Number CA245-07300 - for HP Indigo Series 2 Machines

Manufacturer: Pasilac Therm AS Denmark Type: N-35 Year: 1985/ 2022 Capacity: 60 hl/h

General SKU394U1150 LocationBarneveld MakeGAB Neumann TypeN-B-11.5/GMP No.16754-13691 Year of construction1990 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell4 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Diabon Tube (Material)Graphite Surface11.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface11,5 m² Tube capacity44 l Max. temperature-10°C / +180°C Shell capacity44 l Shell diameter705 mm Shell length1440 mm Max. temperature-10/+180°C Shell with expansion jointcheck Shell connectionsDia. 80 mm (2x) Cover connectionsDia. 200 mm, Dia. 100 mm MaterialGraphite Information Total height1,75 m Weight950 kg Floorspace0,85 x 0,85 mNew arrivalsShell and tube heat exchangersGab NeumannNew arrivalsHea ...

General SKU169K559 LocationBarneveld Makeunknown Year of constructionunknown Material Shell materialStainless steel Cover materialStainless steel Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface39.5 m2 Specified Features - Shell and tube heat exchanger Heat exchanger/Steam generator (1x) Heating surface39,5 M2 Number of tubes:168 Tube diameter25mm Tube length3000mm Shell capacityunknown Shell diameter1200mm Shell length2600mm Information Mounted on legscheck Floorspace4,0x1,5 M Total height2,5 MShell and tube heat exchangers-Heat exchangers > Shell and tube heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Neth ...

Flash Pasteurizer GEA MICRO 50hl/h for Beer This flash pasteurizer was manufactured in 2018 by GEA Denmark for beer pasteurization and it will soon be dismantled professionally. Pasteurizer is completely built on one stainless steel frame and all equipment and instruments are wired. All product touching parts are polished food quality stainless steel (AISI 316) or special plastic suitable for food processes. The machine has CIP connection for proper cleaning. Product is heated in and cooled after pasteurization in a 3-stage plate heat exchanger (heating, cooling and heat recovery) using low pressure steam for heating and cold water / glycol solution for cooling. Pasteurization takes place in tubular stainless steel holding tube following the heat exchanger. The machine contains a service tank for water during CIP process, heat exchanger, holding / pasteurization tube, control cabinet ...

Used CIP station composed of: - 4 tanks with a capacity of 3000 L each: fresh water, acid, lye, hot water - 2 disinfectant tanks - 2 steam-water heat exchangers for heating media - 1 steam-water heat exchanger for heating secondary water - 2 gu30/30 pumps, 1 gh 20 pump - 1 control cabinet – Siemens PLC control - pipes + valves + meters + sensors

Overview  The flash pasteurizer was manufactured in 2000 by the German company APV Ortmann (now KHS) and was intensively modernized in 2011. Until recently, the flash pasteurizer was part of a PET bottling line at a large Austrian beverage bottler and is being freed up as the owner is investing in a completely new line.  Technical data  Capacity 220 hl/ h Heat holding time: approx. 20s  80hl buffer tank, vacuum tight  92% heat recovery by plate heat exchanger Heating of the product to 92°C  Automatic control of the water temperature in the hot water circuit

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

1 x Farrel Bridge four roll inclined Z formation Calender Year: 1956, Roll dimensions: 710mm dia. x 1675mm wide, Peripherally drilled rolls for heating/cooling, Drive configuration: 250 HP DC v/s motor through unidrive gearbox Roll differentials: 1&2 15%, 2&3 3%, 3&4 3% No. 4 bole speed Max 75m/min Main and auxiliary bearings: Bronze Bush type, Bearing lubrication: Re-circulating oil. Roll heating: High pressure hot water 17 bar capacity. Cheek material guides rolls 1 & 2: Fully adjustable width using 0.75 kW motor. Cross axis – yes (roll 4). Motorised roll nip adjustment – Roll adjustment 1, 2 ,and 4 – 3.75kW motors – Cross axis adjustment roll 4 – 3 kW motor, max adj. 50mm. Hydraulic pull backs – max pressure 70 bar.

Type: 100 FSG, built: 1986, gas operated granulating rig, spray granulator with two media nozzle, separator, heat exchanger (Manufacturer: Ohl), blowback filter K 6 R (2,4 m²), dosing unit for adding seeds. Mint condition.

Alfa-Laval,New Plate Heat Exchanger Niro-Inox. Type A 15-BWFDR-1.730KW,with 189 plates,141m2, compact. Type MK 15-BWFDR 1.526KW,with 282 plates,128,8m2 Type MK 15-BWFDR,1.730KW,with 150 plates,68,1m2.

We have tons of processing equipment for sale, half of it has never been used. Products from suppliers like: Alfa Laval - Heat exchangers, pumps, valves etc, large stock. Tuchenhagen - Valves and pumps APV - Valves and pumps Samson - Steam valves (more than 20, never used) Spirax sarco - Steam traps, steam separators, never used Siemens (Danfoss) - Flow meters MAG5000 and MAG6000, mass flow meters MASS 3100, unsed and unused Danfoss - Frequency converters, VLT5000 and VLT6000 series, still in boxes, only a few left Mobrey, Emerson Process - Level sensors, SK267 flanges 50 pieces, density meters unused Fisher rosemont - Mass flow meters DN50, 3 pieces, unused Procesdata - PD340 flow meters, more than 30 pieces, also mod. C, extended version (DN25-DN80) Not on the list? We probably have it, why not try us? Best regards, Editec AB

Manufacturer Battenfeld Type TM 3500-1900 19.500 hour! Control B 2 built 1999 Operating hours h 19500 Closing unit Closing force t 350 Opening path mm 670 holm dimension mm 710 x 710 Installation height min/max mm 300/710 Plate size 1010 x 1010 Injection unit Screw diameter mm 65 spray volume cm3 1078 spray weight gr 981 Spray pressure bar 1777 Dimensions and weights Dimensions LxWxH m 6.9 x 1.8 x 2.1 Machine weight Kg 15500 Other Euromap 12 2 core pull 4 Heating duct controller

Suction wall with exhaust air unit, supply air unit, supply air filter, hot water heating register Suction wall: Make : Krautzberger, built 1992 Dimensions: 2.2 x 3.0 x 0.8 m (approx. BxHxT) Fan: 9,240 m3/h suction power, 2 kW Ex Supply air filter, supply fan, WW heater register: Make : Wolf, built 1999 Fan: 10,000 m3/h suction power, 9 kW Heater: 56 kW, 120 degrees C, 3,500 m3/h Pipeline : supply and exhaust air ducts, deflector hood We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Tank Tank Plant Storage Tank Diesel Filling Tank Heating Oil Tank Tank System Diesel Tank Fuel oil tank tank system diesel tank and other hazardous substances. 30,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 30,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Leng ...

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Volvo-Penta AD41A/B heat exchanger cpl.overtakes. info@miw-zeven.de

small cross-moulding head with heating tapes

Illig deep drawing machine Type: UA 150, 14.500 h Runhour! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent

plate heat exchanger Gea Ahlborn with 2 centrifugal-pumps:(hotwaterpump and recirculationspump) Manufacturer: Gea Ahlborn 6 Sections: preheater 1,preheater 2,heater,precooler 1,cooler,hotwater Type: VT 4 P (1.4401) Fabr.Nr.: 177/4113 flow rate: ca. 750 ltr/h (5 to 72/75°C) - 80 % gain of heat day of construction:1994 weight : ca. 220 kg Dimension : length x width x hight: ca. 103 x 44 x 143 cm

Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...

Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...

Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops  ...

Cat.-Nr. 11-370-2 new double jacket and insulated Volume: 2400 Litres - Parts in touch with product in AISI 316 – other parts in AISI 304 without Heating Jacket Material: Parts that come in touch with the product in V4A (AISI 316) – other parts in V2A (AISI 304) Max.Working Pressure. 0,49 bar Surface fully pickled, passivated and neutralised Insulation with Mineral Wool for Hot Water Tanks Thickness = 80 mm Standard Equipment: Manhole on the top Air Release and Pressure Valve in PVC Manhole inside oval 400 x 350 and Manhole outside rectangular for insulation jacket Sample Valve Level Indicator 24 mm Ladder Support Outlet Discharge with Outlet Pipe DN 50 Digital Thermometer Clear Outlet DN 50 Transport Hooks with Insert Heating Element 230/400V, 7,5 kW Diameter: 1350 mm Height: 3130 mm Cyl. Height: 2160 mm F ...

Ladies and gentlemen, Below we can offer: Manufacturer: Make: 1 piece used continuous furnace, make: Safed Type: 11Bd40/24 Built: 2005 max. working temperature: 1100C Heating capacity: 60 kW Dimensions Length: 15,000 mm Usable width: 340 mm Useful height: 150 mm Heating chamber length: 2,380 mm Muffle, cooling channel new Prices and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty e ...

Technical details material.: OPS, APET, PP, HIPS, ABS Forming area (VxH): 520 x 400 mms Depth of draw: 120 mms of material thickness (max.): 1.50 mms of technical details heating, moulding and cutting. This machine has the BFS system which allows to cut in place in the forming station Forming area: 520 x 400 mms of Max sheet width: 590 mms No of cycles are very much depending on the product. However we have been producing more different products with up 50 cycles by minute, but they were no deeper than 40 mms. All movements are 140 mms with a recommended max. depth/hight of 120 mms We have been producing OPS, APET, PP, HIPS and ABS on the machine. The read few years mainly HIPS and APET The thicknest material we have been producing, were 2.0 mms HIPS, but I wants recommend more than 1.5 mms HIPS.

Stacking mass (LxWxH)- 16m x 1.4m x 1.6m fully automatic drying via computer Heating capacity - 90 kW Top Condition

Stack dimensions (LxWxH) - 16m x 1,4 m x 1,6 m automatic drying by means of computer Heating power - 90 kW Top Condition

Dimensions: 1.5 m x 4.2 m x 1.5 m (approx. WxLxH) H without WT (WT=1.5 x 1.5 x 1.5 m) Heating unit: 267 kW Brenner : Gas burner, make ELCO Exhaust fireplace : stainless steel, single-walled, diameter 250 Supply air unit: 22,800 m3/h; 7.5 kW; n = 960 rpm Exhaust unit: 22,500 m3/h; 7.5 kW; n = 960 rpm Piping : Supply and exhaust air pipes, deflector hood Electrics : Control cabinet, frequency inverter control with speed control This unit set has already been sold! However, we will soon get a similar aggregate set back in. Please contact us. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Collin Two Roll Lab Mill, Roll size: 150mm dia x 400mm wide Hydraulic nip adjustment, Model: WALZWERKE 150, Year of manufacture: 1988, Power: 19kW Electric roll heating with oil - operating temp 50 to 220 C Each roll variable speed from 0 -30 rpm Manual lubrication, programable controls. In very good condition. Manuals/drawings available.

Cat. No. 11-3170 New without heating jacket - round standing on feet Medium-contact parts V4A (AISI 316) with electric screw-in heating 230/400 V, 7.5 kW Standard: Material: medium-contact parts V4A (AISI 316) - otherwise V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Insulation made of mineral wool for hot water tanks thickness = 80 mm Standard: Manhole top DN 400 Ventilation and vent valve made of PVC Manhole inside oval 440 x 350 and manhole 500 x 430 outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with forward-drawn outlet pipe DN 50 with disc valve DN 50 with lid Digital thermometers Clear drain DN 50 with disc valve with lid Transport eyelets with electric screw-in heating, 230/400V, 7.5 kW Cat. No. Contents  ...

Cat. No. 11-3160 New Standard: Material V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Heating jacket height 970 mm Insulation made of PU foam thickness = 80 mm Standard: Manhole top Ventilation valve made of PVC Manhole inside oval 440 x 350 and manhole outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with outlet pipe DN 50 Digital thermometers Clear drain DN 50 Transport eyelets Cat. No. Contents Diameter Height Cyl.Height Feet 11-3160-1 1200l 1350 mm 2070 mm 1000 mm 3 11-3160-2 2400l 1350 mm 3130 mm 2160 mm 3 Disc valve DN 50 Price on request For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Interm ...

Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED

Cat.-Nr. 11-1045 Capacity: 500 up to 1000 Litres COMPLETE For producing juice and filling in from fruits and vegetables For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Complete Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper for emptying fruits and vegetables from wood or OVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2337 – Eurolux Automatic Continuous Belt Press EL-500 for producing fruit juice and fruit wine, cider from apples, pears Capacity: 500 up to 1000 kg/h Cat-Nr 06-1101 – Eurolux Floating Lid Tanks 2 x 1000 Litres Floating Lid Tanks 2 x 500 Litres Floating Lid Tanks 2 x 300 Litres Floating Lid Tanks Cat-Nr 10-2350 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 10 ...

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

Cat.-Nr. 11-1050 new COMPLETE For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Juice from Fruits and Vegetables Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper For emptying fruits or vegetables from wood or PVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2339 – Eurolux Automatic Continuous Belt Press EL-1000 for producing fruit juice and fruit wine, cider from apples, pears Capacity: up to 3000 kg/fresh fruits Cat-Nr 06-1101 – Eurolux Floating Lid Tanks in AISI 304 4 x 1000 Litres,4 x 500 Litres, 4 x 300 Litres Cat-Nr 10-2351 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 1500 Litres Juice/h Cat-Nr 10-2344 – Eurolux Bag-in-Box Filler EL-1800 For filling liquids (frui ...

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

Ventilation system FABRIKat TROGES Vienna, different size, 4,000m3/h, 5,000m3/h, 7,500m3/h, 12,500m3/h, 26,000m3/h. All ventilation system sid equipped with 4 connections for: supply air, exhaust air, fresh air, exhaust air and heat recovery, cross heat exchanger, connections for hot water and cold water. More info. 0043-6641838175 or info@frigocom.at

Garage Schalungensanlagen Rothmund / tar we offer two complete used garage formwork The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). A. garage formwork 2 Rothmund / tar and ueberarbeitet in 2004 by LAIER 5.62 X 2.78 m length and 2.95 x 6 as a fixed size, including ancillary units with spread rungsanlage to the higher level (B). Garage formwork 1 Rothmund special machines For 6 m, 6.5 m and 7 m garages, width 2.95 m set consisting of: 1.1 Set base frame, 2.1 retractable core with extension length adjustment 3.1 rear rollers wall 4.1 front rollers wall 5.2 Longitudinal walls 6.1 Set scope bracket 7.1 Set formwork for electric gate 8.1 Set hydraulic tensioner (down, sideways) 9.1 Set hydraulic system with control panel 10.1 electrical control cabinet Shaker drive 11 incl. auxiliaries (C). 15 Pallets for precast ga ...

Ventilation system York for heating and cooling. Heating 64 KW with gas burner. Cool 33 KW with 2 cooling compressors. 8,500m3/h air mend. The devices are new, never run, even folded. Request on 0043-6641838175 or info@frigocom.at

Cat-Nr. 12-2260 new Sugar Dissolving Tank with Cooling and Heating Jacket, with Insulation - 50.492 Litres in AISI 304 Product Thickness: 1,4 kg / Ltr – 65°C Working Pressure: pressureless Capacity: 50.492 Litres Material: V2A - AISI 304 Surface: 2B welding inside polished Insulation: in mineral wool thickness = 50 mm, completely in stainless steel and welded Thermoplate/Cooling Jacket H=5500 mm Thickness: 2.0 mm Working Pressure (Thermoplate/Cooling Jacket): max. + 3.0 bar – Medium: Water Upper and Lower Bottom: conical shape With manhole lid Diameter: 500 mm With inlet and outlet air controll With level indicator with borosilicate, scale With sample valve With spray head diameter 65 mm demountable with CIP pipe till the bottom of the cylinder + thread connector NW 80 With butterfly valve DN 65 for clear outlet With butterfly valve DN 65 for waste ou ...

Delivery options used mining technology: Offers Mining machinery and plants Abrasion-resistant materials Cables, hoses and pipes Chains and wire ropes Chemicals and reagents Communications Systems and Equipment Continuous miner and cutting device Control and Automation Systems Conveyors, components and accessories Crushers, crushers and grinding plants Dredging and Dredge Equipment Drilling and blasting Electrical appliances, batteries and lighting Engines, electric and diesel Environmental and Emissions Control Manufacture and processing Flotation, agglomeration and filtering Seals and closures Health and safety service and equipment Heating, ventilation and air conditioning Hydraulics and electromechanical equipment Loader, truck and forwarding agent Mining locomotives Mining Wagons Heavy opencast mine Rail & Systems Noise,  ...

Cat. No. 12-2130 in a very good condition With Heating and Cooling Jacket with Paddel Agitator DxH: 2100 x 3900 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.