heater used for sale

; Gross weight [kg]: 3100; Engine: Deutz TCD6.1L6-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1100

Dimensions changed as of February 2023, to 2540x1140x1647 (spec sheet shows old dimensions); Gross weight [kg]: 1400; Engine: Deutz TD2.2L3-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 150

; Gross weight [kg]: 1500; Engine: Kohler KDI2504TCRCAC-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 250

Drum radiator, heating sleeve drum heater, with thermostat VULCANIC Type: 7507 02 Cuff width: 120 mm diameter: Ø 560 - 600 mm 2500 W max. 200°C 230 V AC For drums from 50 to 500 litres capacity New ! Dimensions: 600 x 760 x 120 mm

; Gross weight [kg]: 2960; Engine: Iveco F5MGL415A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1100

; Gross weight [kg]: 6800; Engine: Volvo TWD1683GE-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Stage V Generator, Stage V Aggregaat, Stage 5 Generator, Stage 5 Genset, Stage V Gen set, Stage V Generator set, EU Stage V Generator, StageV, Including : coolant heater and battery charger; Water Tank Volume [l]: 985

; Gross weight [kg]: 1315; Engine: Iveco NEF45TM2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185

; Gross weight [kg]: 4200; Engine: Cummins 6CTAA8.3 G7; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 394

JON WAI 230HPI23H injection molding machine Production - Taiwan. Issue 11.2007. Worker. Locking force 230 tons, Heater - 12,1 Kw horse power 60 HP

JON WAI 250 SD injection molding machine Production - Taiwan. Issue 2008. In working order. Locking force 250 tons Heater - 1802 KW Horse power - 40 HP The injection volume is 820 grams for polystyrene. Large diameter auger - 65mm.

This genset is equipped with DSE 8610 MKII and motorized breaker applicable for net synchronization.; Gross weight [kg]: 7250; Engine: Baudouin 6M33G660/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1100

This genset is equipped with DSE 8610 MKII and motorized breaker applicable for net synchronization.; Gross weight [kg]: 7300; Engine: Baudouin 6M33G715/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1100

; Gross weight [kg]: 18160; Engine: Perkins 4012-46TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

; Gross weight [kg]: 4667; Engine: Perkins 2206A-E13TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Gross weight [kg]: 2854; Engine: Perkins 1506A-E88TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach, Inlcluding: coolant heater and battery charger; Water Tank Volume [l]: 542

; Gross weight [kg]: 3699; Engine: Perkins 2506A-E15TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

2000 Ton Sumitomo Hot Forging Press line Year 2006 Stroke 350 mm (13.78") Strokes per min 75 Shut height 850 mm (33.47") SlideAdj. 7 mm (.27") Ram size 1200 mm LR X 1300 mm FB Bed size 1320 mm LR X 1300 mm FB 4 stage transfer system Slide knockout Bottom knockout Scrap System Dual Die Changer Extra Die Shoes Billet Heater and Billet Saw Also Available This line was used by HONDA to make transmission gears, It takes a billet, cuts it to size, heats it to 1300 C then the press hits it 4 times. It can determine good from bad parts, the bad parts get sent to a quench tank, the good parts get sent into a cool down conveyor that you can pick the parts up by hand at the end. The entire system was ran by one operator.

• For the packaging of products in three-side sealed tubular bags made of half-tubular films (PP, PE, PVC). • Output max. 40 products/min • Product sizes min. (l x x h) 100 x 50 x 10 mm, product length unlimited • Infeed conveyor w 350 mm, l 2,000 mm • Welding width max. 380 mm • Infeed height max. 200 mm • Film width max. 550 mm • Foil roll diam. max. 350 mm • Film thickness 15-50 ym • Longitudinal and transverse sealing • Residual film rewinder • Print mark control • Perforating unit • Automatic operation via light barriers • PLC Siemens S5-100 CPU 103 • Lauer control panel • Drive 400V/50Hz/6kW • 2 spare welding bars • Shrink tunnel SC 4030 SD • Throughput width 450 mm, throughput height 300 mm • Roller conveyor, bars adjustable rotating/non-rotating • 2 heater fans • power 18 kW, contactor control

; Gross weight [kg]: 7408; Engine: Perkins 4008-TAG2A; Accessories: Battery, Control Panel, Including : coolant heater and battery charger, , FG Wilson 1.100 kVA Generator Set

; Gross weight [kg]: 7753; Engine: Perkins 4008-30TAG3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

; Gross weight [kg]: 1390; Engine: Iveco NEF45TM2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 290

Two-column Stela continuous dryer, ALU exhaust fan with dust separator, circulating air fan, indirect air heater with stainless steel chimney, white main burner, corn capacity 30 t/h, 35 to 15% H2O, Tel. 01715213204

contino 400/2 KLT container washer The machine is manufactured in a special service provider design and has a maximum tunnel width of 410 mm and height of 410 mm, which means that almost all common industrial containers can be cleaned. Depending on the degree of soiling, the capacity is

Codimag viva 340 waterless offset 8 colors Electrical equipment and control panel. Longitudinal cutting device with 4 knives. Plate bending device for waterless plates Base with register trolley with flexographic printing unit for varnishing including varnish pump and anilox roller (angle 60°, grid width 80L/cm, volume 9 cm³/m²) Magnetic cylinder for Flexowerk Stork screen printing units each with base and register carriage including ink pump and automatic ink level control UV drying 8 statons Make IST, type M40-8x1-MBS-G-Co-CMK-SLC4 printing units à 120 Watt 4 printing units each 160 Wat (printing unit, varnishing unit, 2xscreen printing) Air-cooled spotlight unit including CMK reflector, telescopic slide and SLC stepless power control Hot foil stamping unit with servo drive incl. -1Hot foil stamper -Foil saving circuit -Special base with register trolley -electronic e ...

; Gross weight [kg]: 3550; Engine: DC09 072A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including battery charger and jacket water heater; Water Tank Volume [l]: 990

Compound dryer galvanized, 3 modules, storage tank, screwable substructure, mobile heater indirect, light oil Tel. 01715213204

; Gross weight [kg]: 3550; Engine: DC09 072A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including battery charger and jacket water heater; Water Tank Volume [l]: 990

; Gross weight [kg]: 7753; Engine: Perkins 4008-30TAG3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

; Gross weight [kg]: 7408; Engine: Perkins 4008-TAG2A; Accessories: Battery, Control Panel, Including : coolant heater and battery charger, , FG Wilson 1.100 kVA Generator Set

; Gross weight [kg]: 6487; Engine: Cummins QSK23-G3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

Warranty: 1 year for continuous use 2 years for Stand by use; Gross weight [kg]: 1455; Engine: Cummins 4BTAA3.3-G14; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 140

Wall bracket ROBUR F20 / F30 4 arms arm length 315 mm Angle between arms: 85° / 95° Projection 650 mm 360° rotatable (horizontal) wall mounting 220 x 300mm Accessories z.B. for ROBUR hall heater F20N, F30 used, tested ! Dimensions: 900 x 400 x 300 mm

; Gross weight [kg]: 1455; Engine: Cummins 4BTAA3.3-G14; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 140

Warranty:, 1 year for continuous use, 2 years for Stand by use; Gross weight [kg]: 1105; Engine: Cummins X3.3-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 71

Hot air gun KARL KLEIN VENTILATORENBAU ENG 1-1,6BK V001008 cartridge heater: 1.0 kW, 110 V motor: 0.032 kW, 220 V AC 50 Hz connection diameter ( inside ): Ø 29 / 67 mm connection diameter ( outside ): Ø 34 / 70 mm used, tested ! Dimensions: 550 x 190 x 400 mm

Warranty:, 1 year for continuous use, 2 years for Stand by use; Gross weight [kg]: 1105; Engine: Cummins X3.3-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 71

; Gross weight [kg]: 965; Engine: Cummins X2.5G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 71

; Gross weight [kg]: 8380; Engine: KTA38-G14; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

; Gross weight [kg]: 2924; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 721

; Gross weight [kg]: 5071; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 842

; Gross weight [kg]: 3036; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 721

; Gross weight [kg]: 1249; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 219

; Gross weight [kg]: 5874; Engine: Caterpillar C18; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1082

; Gross weight [kg]: 5874; Engine: Caterpillar C18; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1082

IR heating system, infrared heater KRIEGER Year: 1996 Nominal heat output: 16 kW 400 V air supply is required ! stainless steel housing Dimensions: 820 x 800 x 520 mm

; Gross weight [kg]: 4832; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 910

; Gross weight [kg]: 6690; Engine: Caterpillar C18; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1307

; Power [PS]: 96; Gross weight [kg]: 1416; Engine: Caterpillar C4.4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 219

Special water bath, laboratory water bath DINKELBERG ATH 232319 Year: 2004 10 liters ambient temp. +5° to +80°C Housing: Polypropylene with heater / heating element 230 V 800 W Dimensions: 420 x 250 x 360 mm

; Gross weight [kg]: 4667; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 842