heat treatment used for sale

2007 Mercedes Combined heat and power plant (CHP) The CHP plant was originally intended for an oil platform. Therefore, it is protected against salt water and can also be operated in island mode. Technical data (See pictures) CHP plant with Mercedes engine, which is designed for multi-quality fuel (diesel, heating oil, pyrolysis oil or vegetable oil). Thus preheating unit and corresponding exhaust gas purification. BJ. 2007. Operating hours: 0 (test run only); The unit was never connected to the network. If palm or vegetable oil is used, preheating” is required to get above the pour point. All pumps were completely overhauled by the manufacturer when we purchased them (see Rg with maintenance report). If you want to drive in island mode, this must be changed on the control + the controller on the generator must be replaced. In addition to electricity, the unit can also recover  ...

Key data: 206 KW, 500 kVA, 400 V

Sokratherm Gas-CHP GG202 oE Gas electricity and heat generators from 2019 with 10,777 operating hours, Complete CHP (closed unit) with additional silencer. 1 available 202 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 47.2M7 V 6/4, 500 KVA Manufacturer: Sokratherm Model: GG202 oE Type: Gas CHP Serial Number: 3131754 Engine: MAN E3262E302 Electric power [KWel]: 206 Thermal power [KWth]: 316 Gas Capacity [KWgas]: 561 Year of Make: 2019 Hours: 10,777 Weight unit [kg]: 6,500 Dimensions LxWxH [cm]: 400 x 150 x 240 AC Generator LSA 47.2M7 V 6/4 Manufacturer: Leroy Somer Model No.: LSA 47.2M7 V 6/4 Type: AC Synchronous Generator Serial Number: 353345/1 Power [KVA]: 500 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 722 Speed [1/min]: 1,500 Year of manufacture: 2018

Producer: Fischer Year of Make: 1999 Output: 250hl/pc

Screwed plate heat exchanger 300 KW, 60 sqm heat exchanger area

Cooling capacity: 619,9kW. Heating capacity: 627,7kW. Number of fans: 12x.

Key data: 65 KW, 400 V

Buderus Gas Generator (CHP) E 0826 DN-60 Gas electricity and heat generator from 1998 with 41,972 operating hours, closed unit, generator with voltage fluctuations. 1 available 65 KWel x 1,500 rpm, 400 V/50 Hz. Manufacturer: Buderus Model No.: E 0826 DN-60 Type: Gas CHP Serial number: 03198-00020-283 Power [KWel]: 65 Power [KWth]: 110 Engine: MAN E0826 E301 Year of Make: 1998 Hours: 41,972 Weight unit [kg]: 2,100 Dimensions LxWxH [m]: 3.10 x 1.00 x 1.75

Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit prices for glue pots with bayonet adapter: for one gluing unit: EUR 6,666.00 for two gluing units: EUR 9,999.00 Delivery time: approx. 4 weeks

Key data: 3600 KW, 4600 kVA, 6600 V

We offer a MWM CHP Type: TBG 632 V16 for sale Specifications: Engine: MWM Type: TBG 632 V16 Power: 3600 kW Generator: AVK Power: 4600 KVA Voltage: 6600 V Running hours: 47,000 h Weight: 46,000 kg Scope of delivery: motor plus generator on base frame

Used heating container from our own plant construction, optionally with oil or gas firing, ideal for failure prevention or bridging in the high output range (e.g. industry, residential complexes, etc.), integrated heating oil tank.

- Number of sections: 1 - Capacity: 1000 l/h - Connection: Clamp 50.5 mm - In good condition

Key data: 163 KW, 200 kVA

We currently offer: Generator set Aggreko Model No.: QSB7-G6 Engine Cummins Generator Stamford Power: 200 KVA / 163 KW Hz 50 RPM 1500 Year of construction 2012 Hours: 14589 Metrics: L: 4.15m H: 2.50m W: 1.15m Weight: 4887 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 504 KW, 630 kVA

We currently offer: GenSet generator set Type: V630GX Engine Volvo Type: TWD 1643 GE Generator Marelli Type: MJB 355 MA4 Power: 630 KVA / 504 KW Generator 680 KVA IP 23 Hz 50 Year of construction 2009 Hours: 7307 Metrics L: 4.65m H: 2.45m B: 1.85m Weight: Empty: 6580 kg / Loaded: 7397 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Shell-and-tube heat exchanger stainless steel Manufacturer: SPIRAX SARCO Fabr. No. 3640 Jackets and tubes made of 1.4571 Power 600 kW 7,400 litres of water from 10 °C to 80 °C at 8 bar saturated steam and 90 °C condensate temperature Pipe length 2.45 m, total length 2.60 m, diameter 18 cm Around the tubes: Pressure 13 bar Operating temperature 200 °C Capacity 33 litres In the tubes: Pressure 10 bar Operating temperature 120 °C Capacity 18 litres Product page both DN 40 flange Most Fabulous DN 50/DN 25 Flange

We are offering a complete Water-Cooled Induction Leveling System, composed of the following components: 1. Electrical Power Unit - Power Supply: 3 x 400V, 50/60 Hz - Current (In): 50 A - Short-Circuit Current (Icc): 35 kA - Item: 01 - Type: IFC/A-25 (25 kW / 20 kHz) - Year: 2023 2. Inductor Unit - Manufacturer: ATE - Drawing: 239003100_0 - Item: 03 - Year: 2023 - Type: INDUKTOR RECHTS (Right Inductor) 3. Chiller Unit - Manufacturer: M.T.A - Model: TAEevo TECH 051 - Production Year: 2023 - Voltage: 400V / 3Ph / 50 Hz - Power Consumption: 8.8 kW - Current: 10 A - Protection Class: IP54 - Refrigerant: R410A - Charge: 2.088 kg - Global Warming Potential (GWP): 2088 - Cooling Capacity: 32.0 kW (EWT 20°C, LWT 15°C) - Water Flow Rate: 5.5 m³/h - Water Connections: 1 1/4" - Weight: 239 kg Find more here - / Contact us at -

max. temperature: 420 Grad size of opening: 200 mm depth of chamber: 350 mm total power requirement: 2,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2500 KW, 10500 V

FOR SALE: Caterpillar G3520H Gas Generator Set (2013) Zero Hours Since Major Overhaul | 2,500 kW Continuous Power Output Maximize operational efficiency and reliability with this prime power, high-capacity industrial generator. This natural gas-powered genset delivers continuous-duty performance and is ideally suited for mission-critical infrastructure, distributed energy systems, and onsite power generation. Technical Specifications: Engine Model: Caterpillar G3520H Generator Set S/N: GFP00117 Manufacture Year: 2013 Power Rating: 2,500 kW / 3,125 kVA (Base Load / Baseload Applications) Fuel Type: Natural Gas Rated Voltage: 10,500 V Frequency: 50 Hz Power Factor: 0.8 (Lagging) RPM: 1500 Rated Current: 172 A Phase Configuration: 3-Phase Connection Type: Wye (Star) Insulation Class: F Excitation Voltage / Current: 50 V / 4.3 A Cooling Sy ...

Heat exchanger NIKO Capacity: approx. 10.000 bottles/h Bottle types: 0,2 l and 1,0 l Completely stainless steel Welded in one piece Length: approx. 8 m, width: 2,60 m

Inverter heat pump. Very good condition. Was used for heating. Closed circuit. Glycol. Serviced. Power approx. 53 kW

Stock number: A217, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Scraped surface heat exchanger , Standing: 4 pcs. legs, Motor: 2,2 kW, Total height: 2600 mm., Connections: 4 pcs Ø 2, Manufacturer: APV

Key data: 48 KW, 60 kVA

Number 007 Generator sets Type: K0363 Engine Iveco Generator LeRoy Somer Power: 60 KVA / 48 KW Hz 50 RPM 1500 IP 21 AVR controller RS 437 Year of manufacture 1989 Hours 237 Accessories: Control cabinet Metrics: L: 2.25m H: 1.50m B: 0.70m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Key data: 28 kVA

Dismantled and stored induction hardening system from Steremat Elektrowärme GmbH type EA 15DA-2C-HF turntable with 50 magnetic workpiece holders and a manual workstation, generator from ELDEC type: HFG 15 DA, HF power 15KW, power consumption at full load 18 KVA, frequency range 150 - 350 kHZ

Stock number: A212, Tube heat exchanger, stainless steel,, insulated., 27 pc Ø 1 product pipe,, 4 m² heating surface., Material: Stainless steel AISI 304

Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible.

Stock number: A144, Scrabed surface heat exchanger, stainless steel,, Brogli model Agitemp., 9,2 kW gear motor., 212 rpm., Ø 1 connections., Material: Stainless steel AISI 304

Stock number: A216, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Scraped surface heat exchanger , Standing: 4 pcs. legs, Motor: 2,2 kW - 380 Volt, Total height: 2150 mm., Connections: 4 pcs Ø 2, Manufacturer: APV, Model/type: VT 460, Year: 2000

Stock number: A051, Scraped heat-exchanger, stainless steel,, Gerstenberg & Agger,, type Labo Perfektor 1x57 B/L,, 4 zones., Material: Stainless steel AISI 304

Stock number: A052, Set of scraped surface heat exchangers, stainless steel,, APV type SSHE 2HD 672 1991., Double tube 2 x Ø 160 x L 1500 mm., Horizontal lying in stainless steel cabinet., 5,5 kW gear motors, 148 rpm, 220/380 V., Material: Stainless steel AISI 304

Stock number: A050, Scraped heat-exchanger, stainless steel,, Votator type 1C 624 L,, 2 zones., 3 HK motor, adjustable speed, 160 - 640 r/min., Material: Stainless steel AISI 304

Stock number: A202, Tube heat exchanger, stainless steel,, lying on legs., Ø 1 product tubes,, in total approx. 20m2 heat surface., Material: Stainless steel AISI 304

Stock number: A208, Tube heat exchanger, stainless steel,, 60 pcs. Ø 20 x L 2450 mm. tubes., Estimated 9,23 m2 heating surface,, outer dimensions Ø 350 x L 2700 mm., Material: Stainless steel AISI 304

Stock number: A203, Tube heat exchanger, stainless steel,, 36 pcs. Ø 20 x L 3000 mm. tubes., Approx. 6,78 m2 heating area,, outer dimensions D 375 x L 3050 mm., Material: Stainless steel AISI 304

Stock number: A205, Tube heat exchanger, stainless steel,, approx. Ø 30 mm. spiral tube., Outer dimensions D 260 x L 2810 mm., Material: Stainless steel AISI 304

Stock number: A198, Tube heat exchanger, stainless steel,, insulated, outside rivet cladding., 20,4 m2 heating surface,, calculation pressure 8 baro., D 500 x L 4450 mm. total., Material: Stainless steel AISI 304

Stock number: A201, Tube heat exchanger, stainless steel,, Spiraflo type Monotube 2/2,5-30., Ø 2 x L 3000 mm., Material: Stainless steel AISI 304

Stock number: A061, Tube heat exchanger, stainless steel,, containing:, 16 tubes, L 1900 mm each., 1 core heating/cooling., 1½ product tube., 2 double jacket, heating/cooling., 1 tube, L 1900 mm., 1½ product tube., 2 double jacket, heating/cooling., Total area 6,0 m2., Material: Stainless steel AISI 304

Stock number: A185, Tube heat exchanger, stainless steel,, OY Sanatasalo Sohlberg AB., Material: Stainless steel AISI 304

Stock number: A010, Tube heat exchanger, stainless steel,, Pasilac type RDF., Standing on legs i stainless cabinet., Ø 12 x 25000 mm product tube., Material: Stainless steel AISI 304

Country of origin: Germany, Weight: 200

For sale rotary dryer made from Bison, output 5 t/h, with heating stove 6mW with self feed and self cleaning moving fllor. With all need equipment, cyclon, chimney, and fans. Price 110.000,00 EUR EXW. +38765812388 Neven

Key data: 1094 KW, 1445 kVA, 400 V

Jenbacher Gas CHP C320 GS-B Bio-gas electricity and heat generator from 2006 with 63,868 operating hours, Container with control, exhaust gas heat exchanger, exhaust silencer and cooling. 1 available 1,064 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford A06H625192, 1,445 KVA Manufacturer: Jenbacher Model: C320 GS-B Type: Bio-Gas CHP Container Serial number: 0204758/002 Power [KWel]: 1,064 Engine: J 320 GS Serial Number: 1237603 Engine power [KW]: 1,094 Year of Make: 2006 Hours: 63,868 Weight gene set [kg]: 11,000 Weight container [kg]: 25,000 Dimensions LxWxH [cm]: 1,220 x 250 x 285 AC Generator Stamford A06H625192 Manufacturer: Stamford Model No.: A06H625192 Type: AC Synchronous Generator Serial number: 0204758/002 Power [KVA]: 1,445 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2,237 Speed [1/min]: 1,500 Year of Make: 2006 Hours: 63,868 Weigh ...

Machine name: CHP used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year of Make: 2005 Generator: Leroy Somer Generator Type: LSA44.2S7/4 Generator kW: 132 kVA Turbo: No Fuel Type: Sewage Gas Electrical power: 53 kW Thermal power: 87 kW Drive engine: MAN E0836 E302, 6 cylinders, 56kW Dimensions: L 3,600 x W 950 x H 1,750 mm Curb weight: 2,200 kg Tech. Documentation: Yes Note: The engine was changed in 2013 Condition: Used Price: On request

Machine name: Combined heat and power plant used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year of Make: 2005 Generator: Leroy Somer Generator Type: LSA 44.27/4 Generator kW: 132 kVA Fuel Type: Sewage Gas Electrical power: 53 kW Thermal power: 87 kW Drive engine: MAN E0836 E302, 6 cylinders, 56 kW Dimensions: L 3600 x W 950 x H 1750 mm Curb weight: 2200 kg Tech. Documentation: Yes Note: The engine was changed in 2013 Condition: Used Price: On request

Hardly used, in very good condition. There is no longer any need for sale.

A 2-stage plate heat exchanger W. Schmidt KG is available. Throughput capacity: 12000l/h, product temperature range: 5°C-93°C, max. operating pressure: 6bar, product: wort, machine dimensions X/Y/Z: approx. 1750mm/1750mm/600mm, weight: approx. 1000kg. Including 126 removed plates. On-site inspection is possible.

Inverter heat pumps / chiller air-cooled reversible, Type: iHCY 020 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 020 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation up to -15 / -10°C suction temperature. Including crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 6.43 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 1.13 Available pump pressure bar: 0.84 Ambient temperature °C +7 Cooling capacity kW 5.46 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 0.971 Available pump pressure bar: 0.893 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 3.06 Max. current (A) 11.43 Starting C ...

Universal temperature control unit WEINREICH type WTD 4Temperature control unit with electric heating and connections for external coolingFabr. No.: 11932217 year of construction 1993Temperature max. 140CBorcing pressure max. 6 barPump capacity 30 l/min. Tank volume 4 litresHeating capacity 4 kWeergisation capacity heat exchanger 15 kWCotor capacity of the pump 0.37 kWUmrune water supply + return G 3/8Cooling water flow + return G 3/8Total capacity 4.4 kWNe-connection 380 volts, 50 Hz, CEE plug-in temperature control medium water

Inverter heat pumps / chiller air-cooled reversible, Type: iHCY 020 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 020 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation up to -15 / -10°C suction temperature. Including crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 6.43 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 1.13 Available pump pressure bar: 0.84 Ambient temperature °C +7 Cooling capacity kW 5.46 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 0.971 Available pump pressure bar: 0.893 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 3.06 Max. current (A) 11.43 Starting C ...

here are 3 new heaters with cable and accessories. Brand-new Special price

Key data: 999 KW, 999 kVA, 999 V

Dear Ladies and Gentlemen, We hereby offer the following refurbished MAN replacement gas engines of the E08xx, E28xx or E32xx series. Description: • Refurbished gas engine, refurbished according to recognised quality standards • Complete engine, ready to use • Multi-cylinder V-shaped or in-line engine with water-cooled system • Water-cooled exhaust gas routing Engine versions and power ranges MAN E0834 > 60kW MAN E0836 > 75-100kW MAN E2876 > 190-210kW MAN E2848 > 250-270kW MAN E2842 > 360-400kW MAN E3268 > 350kW MAN E3262 > 530kW Repairs: • Engine block carefully checked, processed and cleaned (incl. sealing surfaces, bearing points and oil channels) • Crankshaft and camshaft checked to standard dimensions, machined and replaced if necessary • Cylinder heads as replacement components, tested and overhauled (incl. valve guides and seat rings) • Conne ...

Key data: 305 KW, 380 kVA

We currently offer: Number 71 John Deere generator set Magnaplus Generator Power 380 KVA / 305 KW RPM 1500 Hz 50 Hours: 7033 Year of manufacture 2004 Metrics: L: 3.75m H: 2.60m W: 1.35m Weight: 5 tons The engine of the generator turns, but does not start. You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242