heat exchanger used for sale

Brembana Helixchanger Heat Exchanger Notified body AIB VINCOTTE Pressure 4/10 bar Capacity 6600/3800L Hydr.press 7,5/14,3 bar

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible.

Fisher Type: Flash Pasteurizer Year: 1999 Efficiency: 120 Hl

Heat exchanger, construction heating, construction dryer, heating, hall heating, hot water exchanger, fan heater, heating, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -pure heat exchanger, only usable in conjunction with a heating unit (e.g. Wacker Neuson HP 252) -Type: HX 60 -Power: 43.5 kW -Quantity: 8 pieces available -Price per piece -Dimensions: 660/720/H1065 mm -Weight: 106 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, heat exchanger shell and tube heat exchanger -Type: BOF 806-0-4 -Contents: Jacket space 50.7 l / Tube space 22.0 l -Operating pressure: max. 16 / 10 bar -Dimensions: 2120/285/H305 mm -Weight: 146 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, heat exchanger shell and tube heat exchanger -Type: BOF 807-0-4 -Contents: Jacket space bronze 35.6 l / Tube space copper 15.3 l -Operating pressure: max. 16 / 10 bar -Dimensions: 2480/360/H350 mm -Weight: 236 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Manufacturer: Jiangsu, heat exchanger type SL-421 -Pump: Aulank CPS-20 1.5 kW -Flow rate: 180 l/min -Container: Material stainless steel, with level indicator -Transport dimensions: 1180/780/H760 mm -Weight: 80 kg

Heat exchanger, rotary heat exchanger, exhaust air heat exchanger, microchannel heat exchanger, microchannel tube heat exchanger, condenser, evaporator coil, MCHE -Manufacturer: SunCo, microchannel heat exchanger -Type: SC-1800 -Heat exchanger: made of aluminum tubes with aluminum fins -Connection: with copper pipe, see photos -Dimensions: 1210/1150/H40 mm -Weight: 16.8 kg

Plate heat exchangers; isolated; on rack; width 50 cm, height 1.10 m, depth 20 cm, for an extra charge also with partial piping and 3 gate valves Loading FREE Truck

Stainless steel heat exchanger of the brand XCHANGER model C-125. C-125 Series heat exchanger, designed for heating and cooling low-pressure gas streams. High-performance modular equipment, ideal for applications such as post-cooling, dehumidification and air treatment in industrial systems. Manufactured with fin core and expanded tubes for maximum thermal efficiency and structural robustness. Front and rear access design allows core removal without disassembling the gas line. Suitable for pressures from vacuum to 15 PSIG High durability industrial construction Fog separator integration possible Connections adaptable according to need Material Stainless steel Technical characteristics Model C-125 Documentation No documentation Status Unused Manufactured by XChanger

MAFELCA brand stainless steel tubular heat exchanger of 43 m2 Year 2023. Connections DN50 PN16, DN150 PN16, DN450 PN10 Material Stainless steel Technical characteristics Year of manufacture 2023 Housing volume 875 L Volume of tubes 520 L Tube Steps 2 Number of tubes 162 Working temperature of the tubes -10/50 ºC Working pressure of the tubes 16 bar Working temperature of the housing -10/100 ºC Working pressure of the housing 10 bar Equipment dimensions Length of the tubes 4402 mm Inner diameter tubes 17 mm Transportation Information Length 5400 mm Width 920 mm Height 1250 mm Weight 1887 Kg Exchange Surface Exchange Surface 43 m2 Status In your state Manufactured by Mafelca

Vertical heat exchanger made of stainless steel from the brand TALLERES MAC of 48.5 m2. Year 2001. Material Stainless steel Technical characteristics Year of manufacture 2001 Number of tubes 203 Working temperature of the tubes 230 ºC Working pressure of the tubes -1 bar Working temperature of the housing 310 ºC Working pressure of the housing 5.39 bar Equipment dimensions Length of the tubes 4000 mm Outer diameter tubes 19.05X1.65 mm Transportation Information Length 4000 mm Width 850 mm Weight 1300 Kg Documentation Plans Exchange Surface Exchange Surface 48.50 m2 Status Reviewed Manufactured by Mac Workshops

Stainless steel tubular heat exchanger from the MAFELCA brand with an exchange area of 43 m2. Year 2023. Connections DN50 PN16, DN150 PN16, DN450 PN10 Material Stainless steel Technical characteristics Year of manufacture 2023 Housing volume 875 L Volume of tubes 520 L Number of tubes 162 Working temperature of the tubes -10/50 ºC Working pressure of the tubes 16 bar Working temperature of the housing -10/100 ºC Working pressure of the housing 10 bar Equipment dimensions Length of the tubes 4402 mm Outer diameter tubes 19.05 mm Transportation Information Length 5400 mm Width 920 mm Height 1250 mm Weight 1887 Kg Documentation Plans Exchange Surface Exchange Surface 43 m2 Status Reviewed Manufactured by Mafelca

ELCA brand heat exchanger of 10.2 m2, manufactured in 1989. Material Graphite Technical characteristics Year of manufacture 1989 Housing volume 60 L Tube Steps 1 Number of tubes 61 Working temperature of the tubes 160 ºC Working pressure of the tubes 3 bar Working temperature of the housing -25/+160 ºC Working pressure of the housing 3 bar Equipment dimensions Housing diameter 405 mm Length of the tubes 2000 mm Inner diameter tubes 20 mm Transportation Information Length 3000 mm Height 800 mm Weight 580 Kg Documentation Pressure Certificate Plans Exchange Surface Exchange Surface 10.20 m2 Manufactured by Elca

Stock number: A223, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Plate heat exchanger, Heating surface: 0,6 m², Dimensions: L 495 x W 198 x H 125 mm., Total height: H 215 mm., Working temperature: 0/95° C, Working pressure: 6 bar, Manufacturer: APV, Type: T 4, Year: 1989

Alfa Laval M/TL Series Plate Heat Exchangers Condition: unused Manufacturer: Alfa Laval Lund AB (Sweden) Type: M/TL Series Gasket Plate Heat Exchanger This type of heat exchanger is often used in: - Food and beverage industry (milk, beer, juice, etc.) - the chemical and pharmaceutical industry - HVAC systems (district heating/cooling) - Industrial process plants for heat recovery and energy optimisation

Stock number: A212, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube heat exchanger, Amount of tubes: 27 pcs., Product tube diameter: Ø 1, Insulated: Yes, Heating surface: 4,03 m², Inner dimensioner: L 1900 x W 300 mm., Outer dimensioner: L 2050 x W 400 mm.

Stock number: A202, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Tube heat exchanger, Construction: Lying on legs, Amount of tubes: 127 pcs. , Product tube diameter: Ø 1, Heating surface: App. 20 m²

Manufacturer: APV Rosista GmbH,Condition: used,Other: - Manufacturer: APV- Type: DELTA SR52- permissible Operating overpressure of the frame: 13 bar,last use: Winery,Nameplate: Yes,Total height: 2,050,Total width: 700,Total length: 1,750

10 bar - 155° - 5399 KW, 2864 L, 3052 L

This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 240 hl/h 2 stages, Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm, Operating pressure: 23 bar, Length: 2000 mm, Width: 700 mm, Height: 2000 mm

Flash pasteurizer for pasteurizing liquid food products. With pumps, preheater and control unit mounted on a common frame. Designed for a capacity of 1000 liters/hour., Additional title: Pasteurisation, Capacity: 1000 l/h, Compressed air: 6 bar for control air, Length: 1,7 m, Width: 1,2 m, Height: 2,5 m, Operation / Control: HMI on switch cabinet, Base construction: mounted on frame, Features: 2 x Alfa Laval plate heat exchangers, 2 x centrifugal pumps, pressure compensation tank, sight glass, temperature and pressure sensors, various other fittings and valves, HMI

This vertical plate heat exchanger from GEA Ahlborn is designed for efficient temperature exchange between two liquids. It is made of stainless steel and is designed for a permissible pressure of 16 bar and a permissible temperature of 100 °C, making it suitable for a wide range of industrial and brewing applications. The unit has a robust base construction with supports that ensure stability during operation. With dimensions of 1.55 m (L) × 0.45 m (W) × 1.50 m (H) and a weight of 1,500 kg, it offers a compact yet robust solution for heat transfer needs. Our team at VBW Asset Trade will be happy to answer your questions., Permissible pressure: 16 bar , Permissible temperature: 100 °C, Length: 1,55 m, Width: 0,45 m, Height: 1,50 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Base construction: mainstays

Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h, Additional title: 2-stage heat exchanger, Capacity: 600 hl/h, Hot water: 750 hl/h, Operating pressure: 21 bar, Operating temperature: 100 °C, Length: 2,15 m, Width: 0,95 m, Height: 2,15 m, Weight: 5000 kg, Material: EPDM HT / NBR / 1.4439

incl. shell and tube heat exchanger 5\" incl. pallet, pack size (LxWxH) approx: 1200x1640x1000 mm Auction-ID: A1-48287-1

Equipment: Insulation,Manufacturer: Tetra Pak Processing,Condition: used,Other: 8 minutes Hot holding Pipes DN 80 Length: 647 meters Manufacturer: Tetra Pak Weight approx. 7 t ,Remarks: Wall thickness of the pipes 2mm (1.7mm in the bend area) 6 height-adjustable feet Smaller dents in the insulation jacket Insulation jacket is no longer present in 2 parts (see photos),last use: dairy,Nameplate: No,Insulation: available,material insulating jacket: stainless steel,material pipes: AISI304 (V2A) 1.4301,total height: 3.200,total width: 1.550,total length: 6.530

Equipment: Insulation,Manufacturer: PAC Pharma-Anlagen-Consult GmbH,Condition: used,Other: Outer diameter of pipes approx. 10 mm,Exchange surface: 0.99,Last use: Pharmacy,Type plate: Yes,Insulation: available,Material insulation jacket: Stainless steel,Volume of jacket space: 7,Material jacket: AISI316 (V4A) 1.4571,Max. permissible size. Operating overpressure jacket space: 6,0,Volume pipe space: 3,Number of pipes: 20,Pipe length: 1980,Diameter pipes: 8,Max. permissible Operating temperature raw space: 144,Max. max. Operating overpressure raw space: 7.0,Diameter outside: 200,Diameter inside: 86,Total length: 2,120

Equipment: Insulation,Manufacturer: Barriquand Echangeurs,Condition: Used,Other: Replacement area: 4 (2 x 2) m²Side A:Content: 9 liter max. Operating overpressure: 7 permissible Operating temperature: -40/+20 CSpart B:Content: 29 liter permissible Operating overpressure: 8 barzul. Operating Temperature: -40/+20 C ,Exchange Area: 4.0,Last Use: Pharmaceutical Chemistry,Nameplate: Yes,Insulation: Available,Insulation Material: Armaflex

Equipment: Insulation,Manufacturer: Alfa Laval,Condition: used,Other: Dents in the insulating jacket 1 Heat exchanger has a total height of approx. 230 mm due to a flanged connection,Technical documentation: Drawing,Exchange surface: 11.5,last use: Pharmaceutical chemistry,Nameplate: Yes,Insulation: available,Material insulating jacket: Aluminium,Volume sheath space: 226,Material jacket: AISI316 (V4A) 1.4404,Max. permissible Operating overpressure jacket chamber: 4.2,Max. permissible Operating vacuum jacket space: 1.0,Max. permissible Operating temperature sheath chamber: 200,Volume pipe chamber:

Manufacturer: Industrieanlagentechnik Frauental GmbH,Condition: used,Other: 1 connection bent (see photos) Weight: 1400 KG,Technical documents: drawing, acceptance certificate,Exchange surface: 13.8,last purpose: vapour water,nameplate: Yes,Volume sheath space: 1.400,Material jacket: AISI316 (V4A) 1.4571,Max. permissible Operating overpressure jacket chamber: 0.5,Max. permissible Operating vacuum jacket space: 1.0,Max. permissible Operating temperature sheath chamber: 200,Volume pipe space: 400,Material pipes: AISI316 (V4A) 1.4571,Max. permissible Operating temperature raw space: 100,Max. max. Operating overpressure

Van Ingen Tube Puller / Heat Exchanger Maintenance Set Mobile Van Ingen service unit for work on heat exchangers, condensers and industrial coolers. Executed in a robust mobile transport box and equipped with pressure gauge, hoses and maintenance tools. Suitable for overhaul and maintenance work on shell & tube heat exchangers. Offered in used condition with normal signs of wear. Auction-ID: A1-47350-75

Used plate heat exchanger made by MYSAK GROUP, model PSR 3500. Used for heating juices. Technical specifications: - Electrical power of the circulation pump: 180 W - Capacity: 3,500 l/h - Saturated steam requirement: 600 kg/h - Saturated steam pressure: 2 bar - Process water requirement: 35 l - Air pressure: 8 bar - Net weight of the unit: approx. 650 kg

General SKUR0365 MakeBuss SMS LocationBarneveld TypeRieselfilm Gaskuhler Pressure Working pressure shell4 Bar Working pressure tubes0.5 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface3.15 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface3,15 m2 Number of tubes:25 Tube diameter44.5 mm Tube length1000 mm Wall thickness tubes2 mm Max. temperature200°C Shell diameter400 mm Shell length1000 mm MaterialStainless steel 1.4541 (321) With jacketcheck General No.22.11.6351/3 Year of construction1994 Floorspace2,0 x 0,8 m Total height0,8 m Weight500 kgShell and tube heat exchangersOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnology ...

ATLAS COPCO GA 26 VSD FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 26 VSD FF Machine type: Screw compressor with integrated air dryer and heat exchanger Year of manufacture: 2010 Operating hours: approx. 60000 h Weight: approx. 590 kg Dimensions (L x W x H): approx. 1200 x 1800 x 1500 mm Technical details: Rated power: 26 kW Working pressure: 12.8 bar Drive type: Inverter (VSD – Variable Speed Drive) Integrated air dryer: yes Integrated heat exchanger: yes Description: Industrial screw compressor Atlas Copco GA 26 VSD FF equipped with inverter drive technology for energy-efficient operation. The unit includes an integrated air dryer and heat exchanger, ensuring high-quality compressed air supply and optimized performance for industrial applications. Auction-ID: A7-48184-17

Stock number: A226, Volumen: 2,813/2,910 litre, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Plate heat exchanger, Heating surface: 2,52 m², Working temperature: -10/+150° C, Working pressure: Max 16 bar, Dimensions: L 180 x W 180 x H 630 mm., Connections: 4 pcs. Ø 1½, Manufacturer: Danfoss, Type: XGM032H-1-60, Year: 2017, Other: Specially developed for district heating and district cooling systems

Additional title: one-stage, Allowable pressure (wort & water): 10 bar, Allowable temperature (wort & water): 120 °C, Test pressure: 13 bar, Volume: 572 l, Length: 1,537 m, Weight: 3898 kg, Features: DN80 dairy coupling; 421 plates; fluid group 1

horizontal tubular heat exchanger, Additional title: for CIP or hotwater, Media flow: 500 hl/h, Working pressure orifice baffle: 10 bar, Working pressure piping: 8 bar, Working temperature piping: 200 °C, Length: 1,05 m, Width: 0,6 m, Height: 1,1 m, Weight: 300 kg

ALFA LAVAL brand plate exchanger model M6 FM, made of 316 stainless steel. INPUT - OUTPUT S1 - S2 S3 - S4 Volume 3 L 3 L Design pressure 0/10 bar 0/10 bar Design temperature 0/30 ºC 0/20 ºC Test pressure 13 bar 13 bar Maximum working temperature 30 ºC 20 ºC Year of manufacture 2014 Number of Plates 19 Unused

ATEX tubular heat exchanger made of 316L stainless steel from the CHROMALOX brand model TMXXB-12-047P-E2XX, 3.3 m2 Year of manufacture 2016 Number of tubes 24 Tube length 3600 mm Outer diameter tubes 12 mm Exchange area 3.30 m2 Transportation Information Length 4150 mm Width 400 mm Height 600 mm Unused

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø56 x 22mm -Item No.: 814 682 65 -Heating power: 250 W -Voltage: 230V -Dimensions: 150/140/H60 mm -Weight: 0.3 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: PSG, heating tape, heating sleeve -Type: 50Ø38 C -Heating power: 350 W -Voltage: 230 V -Dimensions: 200/130/H40 mm -Weight: 0.2 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø120 x 44mm -Heating power: 750 W -Voltage: 230V -Dimensions: 200/120/H60 mm -Weight: 0.4 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø90 x 30mm -Item No.: 858 762 65 -Heating power: 500 W -Voltage: 220 V -Dimensions: 230/160/H80 mm -Weight: 0.4 kg

Pre- and post-heating coil, air heating element, DN125, 371550, LHE 125 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Dimplex - 371550 - LHE 125 IS Air heating element Electric pre- and post-heating. 0.75 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +30°C, air flow monitor for detecting the smallest air flows at minimum operation and two safety temp ...

Pre- and post-heating coil, air heating element, DN160, 366260, LHE 160 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Unfortunately the type plate has come off - special price Dimplex - 366260 - LHE 160 IS Air heating element Electric pre- and post-heating. 1.5 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +60°C, air flow monitor for detecting the sma ...

Oven Heating Elements / Heating Rods for Quail Piccolo 4 PiecesTubular Radiator with Stainless Steel JacketPower: 250W Voltage: 230V Ear Mantle Material: 1.4828 / AISI 309Bent: U-ShapeTotal Length: 78cmHeatable: 61cmUnheatable: 17cmHole Spacing: 7.5cmDetails see pictures

Oven Heating Elements / Heating Rods for Quail Piccolo 4 PiecesTubular Radiator with Stainless Steel JacketPower: 320WSpanning: 230VRear Sheath Material: 1.4828 / AISI 309Bent: U-ShapeTotal Length: 78cmHeatable: 61cmUnheatable: 17cmHole Spacing: 7.5cmDetails see pictures

Heating elements / heating rod for quail Piccolo NEW ( 4 pieces )for quail Piccolo 1-2 year of construction from 04-2016for the proofing chamberRound elements 20mm diameter580/500mm230 volts / 600 wattsDetails see picture